Home > PLUMBING > ROUGH PLUMBING SUPPLIES > SOLVENTS & SEALERS > THREAD SEALANT COMPOUNDS
Sort By:
1
Harvey 030005-144 Pipe Thread Compound PIPE JNT CMPND W/BRSH GRAY 8OZ Rectorseal 23710 T-Plus 2 Pipe Thread Sealant
Pipe thread compound in stick form. Lubricates, seals and prevents rust and corrosion. Use pipe stick on pressures to 2,000 PSI, temperatures to 350 degrees Fahrenheit for metal pipe carrying water, steam, air, ammonia, gasoline, natural gas,  butane, propane, freon, petroleum oil.  DO NOT USE ON OXYGEN SYSTEMS. Fast set non-hardening paste which lubricates and seals threaded joints. Non-toxic; may be used on water, natural gas, steam and air lines. Perfect for applying gaskets to flanges. Not for use on plastic threads. Non-setting, multi-purpose compound contains teflon, plus synthetic fibers.  May be pressurized immediately following application.  Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, PVC, CPVC, and ABS pipe. Conforms to TT-1732.
Plumb Pak PP854-2 Pipe Joint Compound Rectorseal 25790 Pipe Thread Sealant Brass Craft PS1087 Seal 'N Check Kit
Plumb Pak Pipe Joint Compound, 2 oz, Tube Packing Soft-set, slow drying compound seals, lubricates, protects threaded pipe and fittings.  Can be pressurized immediately for piping up through 2" and 100 psi. Recommended for use on threaded galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, fiberglass reinforced, and PVC pipe.  Conforms to TT-S-1932. Pipe thread sealant is used to seal male to female pipe threads. The leak detection solution is applied (poured) on the joints of a gas installation to detect unsafe seals in the component-to-component connections (shut-off valve to adapter to gas connector, and gas connector to adapter to appliance regulator). Bubbles in the solution will indicate a leak. The pipe thread sealant is preferred over gas PTFE tape because of its fluidity - it seals up the crevices of the Male to Female thread engagement and provides a better seal. The leak detection solution does not contain soap or detergents, eliminating a false reading.
Plumb Pak PP854-1 Pipe Thread Sealant Oatey 15615 Hercules Pipe Thread Sealant Oatey 15510 Hercules
Plumb Pak Pipe Thread Sealant, Teflon, 1 oz, Tube Packing Multi-purpose thread sealant formulated with the highest percentage PTFE content on the market. PTFE particles fill cracks and tiny thread imperfections - providing superior lubricating and sealing properties. Leak-free joints can be tested and put into service immediately. Holds tight against vibration, expansion, and contraction. Brushable; non-separating; will not run or drip from joints. Soft set; no cure time required. Withstands temperatures from -50 deg F to 500 deg F (on steel pipe), and pressures of 12,000 psi (hydraulic), 2600 psi (gas). For use with liquids, including acids and alkalis and gases (except oxygen). For use on metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Superior anti-galling properties with stainless steel. Excellent resistance to strong acids, alkalis and ketones. Non-flammable and contains no heavy metals or volatile solvents. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Low VOC. Meets Fed. Spec. TT-S-1732. White. An all-purpose, tough, pliable, non-petroleum based seal for joints, valves, flanges, and gaskets - puts joints into service in minutes. Brushable; non-separating; will not run or drip from joints. Sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. For use on metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel; and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Apply to pumps, tanks and equipment carrying steam, water, oil, gasoline, fuel oil, hydraulic fluids, natural and LP gas (vapor state), other gases (except oxygen), liquids and chemicals. Can easily be cleaned from tools and hands with isopropyl alcohol or Hercules for hands towels. Performs over a temperature range of -50 deg to 400 deg F (on steel pipe), 12,000 psi (hydraulic), 2600 psi (gas). Certified to ANSI/NSF Standard 61, safe for drinking water lines. Conforms to Mil. Spec. Mil-S-45180 D.
Oatey 15427 Pro Dope Oatey 15620 Hercules Pipe Thread Sealant Oatey 15515 Hercules Pipe Thread Sealant
Standard oil-based thread sealant ensures exceptional leak-proof joints. For use on metal pipe and fittings carrying water, natural gas, air, steam, ammonia, brine, diluted acids, and alkalis. Uniform, smooth consistency provides for an easy application; will not drip or spill out of container. Long shelf life. Non-setting formula will not harden, crack or become brittle. Lubricates as it forms a tight pressure seal. Inhibits rust and corrosion. Wipes clean from hands. Withstands air/steam pressure to 200 psi and liquid pressure to 250 psi at temperatures ranging from 0 deg F to 350 deg F. NOT FOR LP GAS. Not for use on plastic pipe or fittings. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Meets Fed. Spec. TT-S-1732. Gray. Multi-purpose thread sealant formulated with the highest percentage PTFE content on the market. PTFE particles fill cracks and tiny thread imperfections - providing superior lubricating and sealing properties. Leak-free joints can be tested and put into service immediately. Holds tight against vibration, expansion, and contraction. Brushable; non-separating; will not run or drip from joints. Soft set; no cure time required. Withstands temperatures from -50 deg F to 500 deg F (on steel pipe), and pressures of 12,000 psi (hydraulic), 2600 psi (gas). For use with liquids, including acids and alkalis and gases (except oxygen). For use on metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Superior anti-galling properties with stainless steel. Excellent resistance to strong acids, alkalis and ketones. Non-flammable and contains no heavy metals or volatile solvents. Certified to ANSI/NSF Standard 61, safe for drinking water lines. Low VOC. Meets Fed. Spec. TT-S-1732. White. An all-purpose, tough, pliable, non-petroleum based seal for joints, valves, flanges, and gaskets - puts joints into service in minutes. Brushable; non-separating; will not run or drip from joints. Sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. For use on metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel; and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Apply to pumps, tanks and equipment carrying steam, water, oil, gasoline, fuel oil, hydraulic fluids, natural and LP gas (vapor state), other gases (except oxygen), liquids and chemicals. Can easily be cleaned from tools and hands with isopropyl alcohol or Hercules for hands towels. Performs over a temperature range of -50 deg to 400 deg F (on steel pipe), 12,000 psi (hydraulic), 2600 psi (gas). Certified to ANSI/NSF Standard 61, safe for drinking water lines. Conforms to Mil. Spec. Mil-S-45180 D.
Oatey 15703 Hercules Oatey 15707 Hercules Pipe Thread Sealant
All-purpose, tough, pliable seal for joints, valves, flanges, and gaskets - puts joints into service in minutes. An excellent gasket seal - sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. Seals old or worn fittings. Ideal for pumps, tanks and equipment carrying steam, water, oil, gasoline, fuel oil, hydraulic fluids, natural and LP gas (vapor state), anti-freeze, refrigerants except ammonia, lubricants, glycerin, solvents, brine and other gases, liquids and chemicals. For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Provides leak-proof resistance to high pressure, temperature, expansion, contraction and extreme vibration. Grit-free; non-separating, distinctive non-runny consistency. Can easily be cleaned from tools and hands with isopropyl alcohol or Hercules for hands towels. Performs over a temperature range of -50 deg to 450 deg F (on steel pipe), 12,000 psi (hydraulic), 2600 psi (gas). Conforms to Mil. Spec. Mil-S-45180 D. Blue. All-purpose, tough, pliable seal for joints, valves, flanges, and gaskets - puts joints into service in minutes. An excellent gasket seal - sets up quickly and dries to form a very tough, yet flexible seal which will not harden, crack, crumble or shrink. Seals old or worn fittings. Ideal for pumps, tanks and equipment carrying steam, water, oil, gasoline, fuel oil, hydraulic fluids, natural and LP gas (vapor state), anti-freeze, refrigerants except ammonia, lubricants, glycerin, solvents, brine and other gases, liquids and chemicals. For use on all metals, including galvanized steel, black iron, aluminum, copper, brass, stainless steel, and on PVC, ABS, and CPVC plastics (for use on specific brands of CPVC pipe, verify suitability with pipe manufacturer). Provides leak-proof resistance to high pressure, temperature, expansion, contraction and extreme vibration. Grit-free; non-separating, distinctive non-runny consistency. Can easily be cleaned from tools and hands with isopropyl alcohol or Hercules for hands towels. Performs over a temperature range of -50 deg to 450 deg F (on steel pipe), 12,000 psi (hydraulic), 2600 psi (gas). Conforms to Mil. Spec. Mil-S-45180 D. Blue.
   
 
1