Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER HEATERS > WATER HEATER REPAIR PARTS
Sort By:
1
WASHER WATER HEATER SUPPLY    Danco 88493 Water Heater Washer Camco 11523 Drain Valves
Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1" Water heater supply line washer. Permanent installation, fits directly into water heater for easy draining. 2-1/2" length.
Camco Mfg 11061 Dip Tube Camco 07133 Element Gasket Kit Camco 10623 Dielectric Nipple
Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket. Everything needed to install flat, screw-in and universal flange elements. Contains:  (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts. For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length.
B and K 168-003NL Dielectric Unions B K Industries 168-004NL Dielectric Unions Camco 2143 High Watt Density Water Heater Element
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. UL Listed, gasket included.
B and K 167-004NL Dielectric Unions Camco 07223 Adapter Kit B and K 102-816 Water Heater Drain Valves
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. Contains: (1) 2-1/2" 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16" - [no. 18] 5/8" hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit. 1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7.
WaterFlex 0437012 Corrugated Flexible Water Heater Connector B and K Industries 168-005NL Dielectric Unions Camco 2343 High Watt Density Water Heater Element
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. UL Listed, gasket included.
Camco 7723 Dual Element Lower Water Heater Thermostat Camco Mfg 10473 Pressure Relief Valve 3/4 In Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. 3/4" temperature and pressure relief valve with 4" probe. All brass body, stainless steel spring,  factory set at 150 PS, crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. ANS Z21.22 design, AGA certified, furnished with test lever. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
WaterFlex 0437018 Corrugated Flexible Water Heater Connector Camco 2293 High Watt Density Water Heater Element Camco 2203 High Watt Density Water Heater Element
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. UL Listed, gasket included. UL Listed, gasket included.
Camco 2283 High Watt Density Water Heater Element Camco 4363 High Watt Density Water Heater Element Camco 2243 High Watt Density Water Heater Element
UL Listed, gasket included. UL Listed, gasket included. UL Listed, gasket included.
CopperFlex WB00-12N Water Heater Connector Camco 10063 Water Heater Connector Camco 2263 High Watt Density Water Heater Element
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Seamless corrugated 18" flexible copper water connectors. 125 PSI maximum. UL Listed, gasket included.
Camco 4383 High Watt Density Water Heater Element Camco 3943 High Watt Density Water Heater Element Camco 2223 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. UL Listed, gasket included. UL Listed, gasket included.
Camco 01023 Flapper Style Dielectric Heat Trap Camco 4603 High Watt Density Water Heater Element CopperFlex WB00-15N Water Heater Connector
Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4" MPT x 3/4" MPT x 3" length MIP. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
WaterFlex 0437024 Corrugated Flexible Water Heater Connector VALVE VACUUM RLF LD FREE 1/2IN Camco 4523 High Watt Density Water Heater Element
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. UL Listed, gasket included.
Camco 4503 High Watt Density Water Heater Element Camco 4483 High Watt Density Water Heater Element Camco 2163 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. UL Listed, gasket included.
Watts LL100XL-150/210 Temperature/Pressure Relief Valve Camco 2583 Low Watt Density Water Heater Element Watts 100XL Temperature and Pressure Relief Valve
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). UL & CSA listed, gasket included. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
CopperFlex WB00-18N Water Heater Connector Cash Acme U3088FLEX15LF Braided Flexible Water Heater Connector Cash Acme U3088FLEX12LF Braided Flexible Water Heater Connector
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing.
Camco 2363 High Watt Density Water Heater Element Camco 4703 Low Watt Density Water Heater Element Watts 100XL Temperature and Pressure Relief Valve
UL Listed, gasket included. UL Listed, gasket included. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Fluidmaster B1H12 Water Heater Connector Camco 23503 Dielectric Union Camco 4803 High Watt Density Water Heater Element
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Use wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters that are pressure rated to 350 PSI, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps, steam lines. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
CopperFlex WB00-24N Water Heater Connector Cash Acme U3088FLEX18LF Braided Flexible Water Heater Connector Plumb Pak PP888-10LF Water Heater Connector
Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 12 in Length, Stainless Steel
Watts 100XL-8-150 Temperature and Pressure Relief Valve Fluidmaster B1H18 Water Heater Connector Fluidmaster B4H18 Water Heater Connector
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Fluidmaster B2H18 Water Heater Connector Fluidmaster B3H18 Water Heater Connector Plumb Pak PP888-1LF Water Heater Connector
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 12 in Length, Stainless Steel
Camco 11572 Anode Rod Fluidmaster B1H24 Water Heater Connector Camco 08143 Replacement Single Element Water Heater Thermostat
Preserve the life of the water heater by corroding themselves so the water heater doesn't. Easy to install. Replace the drain plug with the product to protect the tank. 5/8" outside diameter. 42" long. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Camco 4643 High Watt Density Water Heater Element Camco 7863 Dual Element Upper Water Heater Thermostat With HLC Camco 7843 Single Element Water Heater Thermostat With HLC
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating.
Cash Acme U3088FLEX24LF Braided Flexible Water Heater Connector Camco 08163 Adjustable Water Heater Upper Thermostat Camco 09423 Replacement Gasket Kit
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating. Fits Richmond, Rheem, Ruud, Vanguard and General Electric brand water heaters. Kits contain burner access door gasket, #20 Torx-head tool, four torx-head screws, and four J-style clip-on nuts.
Plumb Pak PP888-3LF Water Heater Connector VLV TMP/PRS RLF NCLX-5 3/4IN  VLV TMP/PRS RLF NCLX-LX 3/4IN
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 18 in Length, Stainless Steel Ffeatures include a cast bronze body, brass and stainless steel internal parts, silicone seat disc and stainless steel spring. The NCLX incorporates an inert thermal element coating that provides effective isolation from mineral deposits (liming). The NCLX comes standard with a test lever. The valve is completely automatic and reseats after either temperature or pressure relief. 1-1/4" shankd MNPT inlet x FNPT outlet. Ffeatures include a cast bronze body, brass and stainless steel internal parts, silicone seat disc and stainless steel spring. The NCLX incorporates an inert thermal element coating that provides effective isolation from mineral deposits (liming). The NCLX comes standard with a test lever. The valve is completely automatic and reseats after either temperature or pressure relief. 1-1/4" shankd MNPT inlet x FNPT outlet.
Watts 100XL-8-125 Temperature and Pressure Relief Valve Camco 10493 Temperature and Pressure Relief Valves WaterFlex 0437118 Corrugated Flexible Water Heater Connector
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Setting: of 150 PSI / 210 Deg F., stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe. Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Plumb Pak PP888-11LF Water Heater Connector Cash Acme 22441LF Sharkbite Plumb Pak PP888-4LF Water Heater Connector
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 18 in Length, Stainless Steel Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 24 in Length, Stainless Steel
Cash Acme 22604LF Sharkbite Water Heater Installation Kit Camco 2923 Ultra Low Watt Density Water Heater Element Camco 2853 Ultra Low Watt Density Water Heater Element
Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip. UL & CSA listed. Gasket included. Best when water has high mineral content, withstands dry firing, heats in lime and sand buildup that would burn out ordinary elements, highest grade nickel and chromium incoloy, UL Listed, gasket included.
Camco 10193 Water Heater Connector Kit Camco 2903 Ultra Low Watt Density Water Heater Element WaterFlex 0437124 Corrugated Flexible Water Heater Connector
Contains: (2) 3/4" x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll teflon tape. UL Listed, gasket included. Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Camco 4943 Ultra Low Watt Density Water Heater Element Watts 374A Boiler Pressure Relief Valve Camco 2723 Low Watt Density Water Heater Element
Best when water has high mineral content. Withstands dry firing. Heats in lime and sand buildup that would burn out ordinary elements. Highest grade nickel and chromium incoloy alloy. Ultra low-watt density (50 watts per square inch). UL & CSA listed. Used in hot water boiler applications to protect against excessive pressure on all type of hot water heating boiler equipment. Iron body construction with forged bronze inlet connections, non-metallic disc-to-metal seating, stainless steel spring and test lever. Standard pressure setting: 30 psi, pressure range: rated up to 550,000 BTU/hr at 30 psi (2 bar) setting only. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1").
Cash Acme U3068FLEX18BVLF Braided Flexible Water Heater Connector Plumer's Pack 07013 Thermodisc Contractor Pack Plumer's Pack 07023 Thermostat Contractor
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connects to copper, PEX, and CPVC tubing. Contains:  (2) High Watt Density Elements #02342  4500w 240v  (1) TOD lower thermostat #08122  (1) TOD upper thermostat #08162. Contains:  (2) High Watt Density Elements #02342  4500w 240v  (1) Apcom style lower thermostat w/protector #07722  (1) Apcom style upper thermostat w/protector #07862.
Camco 10183 Water Heater Connector Kit Cash Acme U3088FLEX18BVLF Braided Flexible Water Heater Connector Camco 2953 Ultra Low Watt Density Water Heater Element
Contains (2) 3/4" NPT  x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll Teflon tape, (2 )3/4" NPT compression adapters, (1) 1/2" x 24" stainless steel gas connector. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connects to copper, PEX, and CPVC tubing. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1").
Watts LF70A-F Tempering Valve Watts 1156F Feed Water Pressure Regulator Camco 08421 Water Heater Valves
Hydraulically-operated thermostat opens a spring loaded check in the cold water inlet allowing cold water to mix with the hot water. Lead free brass valve body, simple maintenance thermostat assembly, finger-tip dial adjustment cap, stainless steel springs. For use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body construction with NPT threaded inlet and outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Maximum Pressure: 100psi (6.9 bar). 4" water column, 1-1/4" shank length, 1/2" NPT gas inlet by 1/2" inverted flare outlet, adjustable 70-160 degrees.
Camco 08401 Natural Gas Valve Watts 3/4 LF1170M2-UT Temperature Control Valves
Adjustable 70 to 160 degrees F.  42,000 BTU. 4" water column. 1-1/4" shank length. 1/2" NPT gas inlet by 1/2" inverted flare outlet. Specifically designed for mixing hot and cold water on hot water supply systems. Ideal for radiant heat applications. Bronze body construction, solid wax hydraulic principle thermostat, thermostat controls both hot and cold water, integral filter washers and check valves, adjustment cap with locking feature.
   
 
1