Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER HEATERS > WATER HEATER ACCESSORIES
Sort By:
1
Camco 10862 Side Mount Runoff Tube Camco 9973 Quick Change Element Tool Camco 11260 Drain Pan With 1 in PVC Fitting
Presents a rigid surface for gripping with standard wrenches. Can be cut to desired length. Turn off electric change you element without draining your water heater, by turning off water at the water heater to create a vacuum. Remove wires from element put quick change tool on neoprene nub behind element add bucket or basin, have new element handy take out and replace you should not lose more then 2" of water. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Camco 10023 Water Heater Continuity Tester With Battery Camco 11460 Drain Pan With 1 in PVC Fitting Camco 9953 Professional Element Socket
Test your elements and thermostats while still in the water heater. 1 piece. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Fits standard 1/2" socket drive to replace screw-in water heater elements.
Camco 20800 Drain Pan With 1 in PVC Fitting Rheem / Richmond RP20063 Water Heater Gasket Kit Rheem / Richmond RP20064 Thermocoupler-Gasket Kits
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: Burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part. Contains everything that you need to replace the thermocouple and burner gasket on your Richmond FVIR gas water heater. The kit is required anytime the burner door is removed from the unit so that the gasket can be replaced. Kit ensures safe and reliable operation. Kit includes: 24" thermocouple, burner door gasket, tinnerman clips, screws, torx head driver and instructions. For use on Richmond, Rheem, Ruud and GE FVIR water heaters. Genuine OEM replacement part.
Thermwell SP57/11C Insulation Blanket M-D 04663 Water Heater Insulation Blanket Plumb Pak PP888-12LF Water Heater Connector
3" x 48" x 75" vinyl faced fiberglass water heater insulation blanket, R value 10.0, fits up to 60 gallon tank, plastic tape. For gas, oil or electric water heaters. White vinyl backed fiberglass blanket. Designed for gas, oil or electric heaters. Fits up to 60 gallons. Includes adhesive tape for easy installation. Bagged. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 24 in Length, Stainless Steel
DRAIN PAN TANKLESS W/PVC FITNG DRAIN PAN TANKLESS ALUM W/PVC Camco 11231 Water Heater Stand Kit
Includes 1" and 1-1/2" dual size PVC drain fitting. Injection molded for superior strength. Will not rust or corrode. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2".Protect finished areas from water damage. For gas or electric water heaters, aluminum will not rust, corrode, or crack. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2". Protect finished areas from water damage. Stand for gas water heaters from 30 to 50 gallons, constructed of galvanized steel, minimal assembly required, for use with all residential water heaters.  21" x 21" x 18"
Intermatic WH40 Water Heater Timers Rheem / Richmond RTG20220AB Service Valve Kits
Enclosure: NEMA 1 rated indoor steel in gray finish. Spring hasp, with hole for lock, holds permanently attached, side hinged door closed. Three mounting holes on back plus box mounting holes. 7-3/4" H x 5" W x 3" D. Switch rating: 10,000 W (40 amp) Max 250 volt, 60 Hz. Allows user to shift electricity use to "off-peak" time periods to save utility costs. Supply and service valve kit for use with a tankless gas water heater installation. Clean brass meets the strictest Low lead code requirements. Provides an easy way to flush and service your new tankless water heater. Hot and cold installation and service valves. Includes relief valve and unions. Clean brass for low lead codes. Makes it easy for future service and flushing of tankless water heaters.
   
 
1