Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR > TUB & SHOWER DRAINS/PARTS
Sort By:
1
Oatey 43561 Snap-In Floor Drain GASKET TUB DRAIN CARTRIDGE    Oatey 42042 Tile Rings
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Rubber. For tip-toe style bathtub stoppers. 2-1/16" x 1" x 1/4". 4-1/4"  x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains.
COVER DRAIN CLIP SHOWER3-3/8IN Oatey 43565 Snap-In Floor Drain STRAINER TUB SNAP 2IN CHROME
Designed to fit 3-3/8" shower drains. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Steel construction, 2" diameter. Grid-style.
Oatey 43569 Snap-In Floor Drain Plumb Pak PP826-64 Strainer Dome Cover Plumb Pak PP826-4 Flat Tub Overflow Washer
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Strainer dome cover with screw. Plumb Pak Tub Overflow Washer, Flat, Sponge
Plumb Pak PP22612 Face Plate Screw STRAINER SHOWER 3-3/8IN CHROME PLATE OVERFLOW 1-HOLE CHROME
Chrome plated face plate screws. Steel construction, use with 3-1/8" drains. Screws not included. Round design with screw holes 2" center-to-center. Includes adapter to replace one or two hole plates. Screws included.
STRAINER TUB 2-15/16 BRSH NIC DRAIN SHOWER STALL 2 FIP      Plumb Pak PP825-50 Shower Drain Grid
DRAIN SHOWER STALL 2 FIP
Our Price : $4.99
2-15/16" diameter. Brushed nickel finish. Replaces Gerber no. 91-292. Female threaded outlet, stainless steel grid, 3-1/2" flange diameter. 3-5/16" O.D. 6.88" h x 4-3/4" w.
BASKET SHOWER HAIR CATCHER    B & K 133-106 Shower Drain Oatey 42787 Shower Drain
Durable plastic construction. Designed to fit the Danco hair catcher for shower drains (Model #?s: 10533, 10529). Stops hair and other particles from going down the drain For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid. 2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Plumb Pak PP606-23 Clevis Plunger Linkage Assembly World Wide Sourcing 24354 Bath Drain Trip Levers DRAIN STOPPER RAPIDFIT CHROME
For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. Zinc body. Screws included. Plastic. Touch-toe design,
Plumb Pak PP863-50 Replacement Tip Toe Cartridge Plumb Pak PP826-10 1-Hole Trip lever Style Tub Face Plate Oatey Snap-Tite Round Drain Strainer
Threaded shaft. Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Chrome Plated 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded.
Oatey 42097 101 PS Shower Drain Oatey 101 PNC Shower Drain Oatey 42086 101 PS Shower Drain
Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced. Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Plumb Pak PP22601 2-Hole Trip Lever Style Tub Face Plate Danco 80991 Round Bath Drain Overflow Plate With Lever Plumb Pak PP825-51 Shower Drain
Trip lever for drain control. Includes screws. Includes screws. 2" center to center holes. Carded. Fits 2" outlet.
Plumb Pak PP826-11 2-Hole Trip Lever Style Tub Face Plate Oatey Snap-Tite Round Drain Strainer STRAINER SHOWER BRUSH NICKEL
Plumb Pak Tub Face Plate, 2-Hole, Blank Overflow, Suitable For Use With: Bath Drain, Chrome Plated 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded.
Plumb Pak PP826-1 2-Hole Trip Lever Style Tub Face Plate Danco 37680B Bath Drain Gasket Oatey 42202 Shower Drains
Tip Toe Gasket - Case of 5
Our Price : $10.99
Trip lever for drain control. Includes screws. Rubber washer for Toe Touch drain assembly. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes.
Oatey Snap-Tite Square Drain Strainer DRAIN ASSEM TUB PFISTER CHRM  BATH SHOE UNIVERSAL CHROME
4-1/4" x 4-1/2" square snap-in strainer. For use with the Oatey 130 Series drains. Carded. Brass construction, 16 TPI. Comes with strainer and bath shoe. 16 threads per inch. Strainer NOT included.
Plumb Pak PP826-21 Tip Toe Replacement Cartridge Oatey 42213 Shower Drain Oatey 101 PNC Shower Drain
Threaded shaft. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced.
Screw-Tite 42018 Round Strainer OVERFLOW PLATE DRAIN BRSH NIC PLATE OVERFLOW CHROME PFISTER
4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Steel construction, single-hole style, round body. Includes screw and adapter to fit either 1 or 2-hole applications. Round design with screw holes 2" center-to-center. 3-1/8" plate diameter, trip-lever style. Replaces Price Pfister no 960-041. Includes screws.
Oatey 130 42210 Shower Drain Oatey 130 42203 Shower Drain Oatey 101 PNC Shower Drain
Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced.
Oatey Snap-Tite Round Drain Strainer DRAIN STOP LIFT/TURN CHROME   STOPPER BTHTB DRN TCH-TOE BNKL
4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Heavy-duty brass stopper and shaft. Two thread sizes: 5/16" one end and 3/8" on the other. Replaces foot operated stoppers made by Rapid fit 1200 series, Sterling, Casper's and Duracraft. Plastic construction, Includes 3/8" screw stud and 5/16 screw stud.
Danco 10533 Drain Stopper Plumb Pak PP826-22 Waste Shoe Washer LINKAGE TUB DRAIN ASSEMBLY
Prevents clogged shower drains by catching hair and debris before they go down the drain. Removable basket for easy cleaning. Universal fit, fits any standard 4" shower drain. Easy installation. Washer for 1-1/2" bath waste strainer. Use with trip-lever assemblies. Restores open-close feature to drain assembly. Includes plunger assembly: yoke and nut.
Snap-Tite 129 Bathtub Strainer Plumb Pak PP606-22 Clevis Plunger Linkage Assembly Oatey 130 42238 Shower Drain
4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes.
Plumb Pak PP826-10BN 1-Hole Trip lever Style Tub Face Plate TUB STOP TOE TOUCH CHROME     Plumb Pak PP826-20 Replacement Drain Foot Lock Assembly
Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Brushed Nickel Plastic construction. Touch-toe design pushed to open and close. 2? diameter. Grid style to keep drain free from debris. Includes 3/8?and 5/16 screw studs. Push button type with 5/16" thread shaft complete with cartridge and strainer.
Danco 10529 Shower Drain CATCHER/STOPPR HAIR BATH      OVERFLOW PLATE LEVER BRSH NIC
CATCHER/STOPPR HAIR BATH
Our Price : $15.99
Prevents clogged shower drains by catching hair and debris before they go down the drain. Removable basket for easy cleaning. Universal fit, fits any standard 4" shower drain. Easy installation. Metal construction, round design with screw holes 2" center-to-center. Trip lever. Includes screws.
Plumb Pak PP22620PC Drain Foot Lock Assembly Plumb Pak PP7088RB Tubular Waste Shoe Plumb Pak PP863-11 Drain Washer
Push button type with 5/16" thread shaft complete with cartridge and strainer. For waste and overflow. Fine thread. Rubber washer for Foot Lok Stop assembly.
Oatey 42237 Shower Drain TUB DRAIN TRIM TRIPLEVER CHRM TRIM TUB DRAIN TOUCHTOE CHROME
Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Brass construction. Threaded adapter bushings fits a 1-1/2 or 1-3/8? drain shoe. Includes strainer, overflow plate and screw, bath shoe and threaded adapter. Chrome finish. Brass construction, chrome finish. Replaces 1-hole or 2-hole overflow plates. Designed to fit 1-1/2 and 1-7/8" drain shoe sizes. Kit includes overflow plate, bath drain strainer, washer and bushing.
TRIM KIT TUB DRAIN LIFT CHROME TUB DRAIN STRAINER CHROME     World Wide Sourcing PMB-030 Bath Pop-Up Assembly
Metal construction, threaded adapter bushing fits 1-1/2 and 1-7/8" drain shoe sizes. Includes overflow plate, bath drain strainer, washer, and bushing, adapter for use with 1 or 2 hole overflow plate. Chrome finish. Includes adapters for universal fit. Complete kit. Worldwide Sourcing Bath Drain Assembly, Lift and Turn, Chrome Plated
Plumb Pak PP820-10DSPB 1-Hole Trip lever Style Face Plate Plumb Pak PP826-11BN 2-Hole Trip Lever Style Tub Face Plate KIT TUB DRAIN TRIM CHROME
KIT TUB DRAIN TRIM CHROME
Our Price : $19.99
Plumb Pak Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Polished Brass Plumb Pak Tub Face Plate, 2-Hole, Blank Overflow, Suitable For Use With: Bath Drain, Brushed Nickel Metal construction. Includes overflow plate and EZ draim cover. Overflow plate includes adapter to fit both 1 and 2 hole plates. Integral, ergonomic touch activated stopper.
Oatey 42078 101 PS Shower Drain Plumb Pak PP826-34 Replacement Strainer Roller Ball Assembly Plumb Pak 64W-K Trip Lever Bath Drain
Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Replacement assembly. Triplever style complete plastic bath drain. Chrome plated exposed trim. Hand tighten slip joint installation, fits all standard size tubs. Includes all nuts and washers.
Plumb Pak PP826-65 Trip lever Style Trim Kit TRIM TUB DRAIN LEVER BRSH NIC Plumb Pak Foot Lok Stop Bath Drain Assembly With Strainer
For 1-3/8" or 1-1/2" bath drains. Includes face plate, cotter pin, screws, dome strainer cover, and strainer. Brushed nickel, brass construction. Includes grid strainer, overflow plate, bath shoe and plastic adapter bushing, and strainer plate screw. Threaded adapter bushing fits 1-1/2 or 1-7/8 drain shoe. Assembly with 5/16" thread small shaft. Complete with strainer. Chrome finish on exposed parts.
TOUCH TOE BATH WASTE - PLASTIC TRIM TUB DRAIN TOUCHTOE NICKEL KIT TUB DRAIN TRIM BRSH NKL
Durable plastic tubing. Designed to fit standard-size tubs. Includes all parts needed to replace an existing drain or add a new tub. Brushed nickel finish. Metal construction, replaces 1 or 2-hole overflow plates. Includes adapter for replacing 2-hole plate. Designed to fit 1-1/2 and 1-3/8" drain shoe. Includes stopper cartridge, overflow plate, bath shoe, plastic and adapter bushing. Metal construction. Includes overflow plate and EZ draim cover. Overflow plate includes adapter to fit both 1 and 2 hole plates. Integral, ergonomic touch activated stopper.
STOPPER LIFT/TURN PVD BRSH NIC Plumb Pak Lift 'N Turn Bath Drain Assembly Oatey 42404 Shower Drain
PVD, Brass, 5/16 and 3/8" threads. Replaces foot operated stoppers including Rapid Fit 1200 series, Sterling, Casper's and Duracraft. Precision molded construction. 4-1/4" overflow vertical adjustment. 2" waste shoe horizontal adjustment. 2" long brass face plate screws. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes.
Plumb Pak PP826-1BN 2-Hole Trip Lever Style Tub Face Plate SPOUT TUB W/O DIVERTR BRSH NKL Oatey 140 Shower Stall Drain
Trip lever for drain control. Includes screws. Metal construction. Fits 1/2" IPS thread, 1/2" IPS thread in nose, 3/8". thread and 1/2" copper slip fit. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced.
TUB DRAIN TRIP LEVER KIT W/CHR TUB DRAIN TWIST/TURN KIT W/CHR Plumb Pak PP826-34DSBN Replacement Strainer Roller Ball Assembly
Durable 1-1/2 in. plastic tubing, designed to fit standard-size tubs, includes all parts needed to replace an existing drain or add a new tub. Durable 1-1/2 in. plastic tubing. Designed to fit standard-size tubs. Includes all parts needed to replace an existing drain or add a new tub. Replacement assembly.
Plumb Pak PP826-20DSPB Replacement Drain Foot Lock Assembly Plumb Pak PP826-66PC Foot Lok Trim Kit Plumb Pak Lift and Turn Trim Kit
Push button type with 5/16" thread shaft complete with cartridge and strainer. For 1-3/8" or 1-1/2" bath drain. Includes 1 hole face plate, strainer, conversion bushing and face plate converter. Chrome plated trim for 1-3/8" or 1-1/2" bath drains. Includes face plate, strainer, conversion bushing, and face plate converter.
Plumb Pak 630PVC Foot Lok Stop Bath Drain Assembly With Pipe and Tee Plumb Pak 614RB Tubular Bath Drain Waste Shoe With Strainer TRIM TUBDRAIN LIFT/TRN BRS NIC
1-1/2" schedule 40 bath drain with pipe and tee. Chrome plated finish on exposed parts. No.614RB - Fine thread for triple levers Nos.606 and 607, and triple lever-garden tub Nos.609 and 615. No.PP7091SN - For No.600, No.601, No.602 connected waste and overflow. Brushed nickel, brass construction, threaded adapter bushings fits 1-1/2 and 1-7/8" drain shoe. Includes overflow plate, bath drain strainer, washer, bushing, adapter for use with 1 or 2-hole overflow plate.
Plumb Pak 64W Trip Lever Bath Drain Assembly Plumb Pak Lift 'N Turn Bath Drain Assembly Without Pipe Plumb Pak PP209064 Trip Lever Bath Drain Assembly
1-1/2" O.D. tube size. Lift and turn tub drain. 1-1/2" O.D. tube size.
Plumb Pak Foot Lok Stop Bath Drain Plumb Pak 64B Trip Lever Bath Drain Plumb Pak Lift 'N Turn Bath Drain Assembly With Pipe and Tee
Complete plastic bath drain. Chrome plated exposed trim. Hand tighten slip joint installation, fits all standard size tubs. Includes all nuts and washers. Precision molded construction. 2" long brass face plate screws. 1-1/2" O.D. tubular plastic. 1-1/2" IPS threaded strainer. 4-1/4" overflow vertical adjustment. 2" waste shoe horizontal adjustment. Precision molded overflow includes pipe and tee. 2" long brass face plate screws. 1-1/2" schedule 40.
Plumb Pak 640PVC Trip Lever Bath Drain Assembly With Pipe and Tee Plumb Pak PP826-66VB Foot Lok Trim Kit Plumb Pak 65AWK Roller Ball Bath Drain Assembly
Triplever Style Complete Sch. 40 PVC Bath Drain. 1 1/2" Sch. 40 pipe for solvent weld installation. Fits all standard size tubs. Includes all necessary hardware. For 1-3/8" or 1-1/2" bath drain. Includes 1 hole face plate, strainer, conversion bushing and face plate converter. Roller ball style complete plastic bath drain. Chrome plated zinc exposed trim. Hand tighten slip joint installation, fits all standard size tubs. ?Includes all nuts and washers.
Plumb Pak PP64W Trip Lever Bath Drain Plumb Pak PP826-81PC Roller Ball Trim Kit Plumb Pak Foot Lok Stop Bath Drain Assembly
1-1/2" white plastic tubing. Polished chrome finish on exposed parts. For 1-3/8" or 1-1/2" bath drain. Includes 1 hole face plate, strainer, conversion bushing and face plate converter. Precision molded construction, 2" long brass face plate screws. 4-1/4" overflow vertical adjustment. 2" waste shoe horizontal adjustment. 1-1/2" O.D. tubular plastic.
Plumb Pak PP826-81DSBN Roller Ball Trim Kit Danco 10528 Drain Stopper Moen 90530 Tub/Shower Drain Assembly With Lift-N-Drain
For 1-3/8" or 1-1/2" bath drain. Includes 1 hole face plate, strainer, conversion bushing and face plate converter. Integral, ergonomic touch-activated stopper. Universal fit, fits any existing bathtub drain. Easy installation. Tub drain, white plastic tubing with Lift-N-Drain assembly. For 14" and 16" tubs. White PVC tee, 1-1/2" threaded shoe. Boxed.
Danco 10534 Drain Stopper Plumb Pak PP826-81VB Roller Ball Trim Kit Plumb Pak Lift 'N Turn Bath Drain Assembly With Pipe and Tee
Integral, ergonomic touch-activated stopper. Universal fit, fits any existing bathtub drain. Easy installation. For 1-3/8" or 1-1/2" bath drain. Includes 1 hole face plate, strainer, conversion bushing and face plate converter. 1-1/2" schedule 40 bath drain with pipe and tee. Chrome plated finish on exposed parts. Single hole face plate.
Plumb Pak 630LAPVC Foot Lok Stop Bath Drain Assembly With Pipe and Tee Oatey 42070 Shower Drain Plumb Pak 64WDS Trip Lever Bath Drain Assembly
1-1/2" schedule 40 bath drain with pipe and tee. Chrome plated finish on exposed parts. Single hole face plate. 3/8" threaded shaft on foot lok stop assembly. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a rubber gasket and a fiber slip washer.  Three DWV connection methods provide a drain for all applications of metallic pipe.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Precision molded construction. 2" long brass face plate screws. 1-1/2" O.D. tubular plastic. 1-1/2" IPS threaded strainer. 4-1/4" overflow vertical adjustment. 2" waste shoe horizontal adjustment.
Moen 90410 Tub/Shower Drain Assembly Plumb Pak 600SN Bath Drain Assembly With Chain and Rubber Stopper Plumb Pak Lift 'N Turn Bath Drain Assembly
Tub Drain, Brass Tubing with Trip Drain Lever Assembly For exposed tubs. 1-3/8" O.D. 22 gauge brass tube. Cast brass elbows, tee, and nuts. Complete with chain and rubber stopper. Satin Polished Chrome finish strainer. Precision molded overflow, 1-1/2" schedule 40. Half Pak - less pipe and tee. 2" long brass face plate screws.
Plumb Pak 606RB Trip Lever Bath Drain Assembly WASTE OVERFLOW W/FLEXIBLE PIPE Plumb Pak Foot Lok Stop Bath Drain Assembly
For built-in tubs. Professional Line. 20 Gauge. Precision molded construction. 2" long brass face plate screws. 1-1/2" O.D. tubular plastic. 4" overflow vertical adjustment. 1-1/2" IPS threaded strainer. 2" waste shoe horizontal adjustment. Flexible tubing in place of the rigid PVC overflow pipe allows the overflow tubing to easily bend over from a misaligned drain pipe to the overflow hole of the tub1-1/2" -11-1/2 NPSM (coarse thread), 1.865" major diameter (outside thread diameter, 11-1/2 coarse threads per inch. For use with Reverie Freestanding Tub - Orgill sku no.1449545 1-1/2" O.D. 20 gauge. Chrome plated finish on exposed parts.
   
 
1