Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL CONNECTORS > CABLE STAPLES
Sort By:
1
Gardner Bender GSE-15310 Service Entrance Staple Gardner Bender MS-1550T Cable Staple Gardner Bender MS Cable Staple
Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
Gardner Bender MSI-50B Insulated Cable Staple Gardner Bender MS-1575T Cable Staple Gardner Bender PSG Low Voltage Cable Staple
Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage.
Gardner Bender MSI-1525T Insulated Cable Staple Gardner Bender PWS Low Voltage Kwik Mount Cable Staple Gardner Bender PSB Cable Staple
Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation. Quick fastening and guiding of wires. Wires easily snap in or out of two usable sides. Use to secure Christmas light sets, sound system wires, etc. Holds category 5 cable for datacom. For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed.
Gardner Bender MSB Insulated Low Voltage Cable Staple Gardner Bender MSW Insulated Cable Staple Gardner Bender MS-1555 Cable Staple
U-shaped staple fastens audio speaker and bell wire, insulated cradle protects wire. U-shaped staple fastens audio speaker and bell wire, insulated cradle protects wire. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
Gardner Bender GSE-15410 Service Entrance Staple Gardner Bender MS Cable Staple STAPLE METAL INSULATED 1/2IN
Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
Gardner Bender PSB Low Voltage Cable Staple Gardner Bender PS-50 Insulated Cable Staple Gardner Bender PMB-1525 Low Voltage Cable Strap
For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed.
Gardner Bender MS-1577 Cable Staple Gardner Bender PSW-1650T Cable Staple Gardner Bender PCC Low Voltage Clip-On Cable Staple
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. Used for indoor and outdoor applications. UV resistant polyethylene saddle. Zinc plated nails. Secures RG-49, RG-59 and RG-6 coaxial cables. With clip-on feature.
Gardner Bender PS-75 Insulated Cable Staple Gardner Bender PS-1550T Insulated Cable Staple Gardner Bender MDI Insulated High Impact Cable Staple
For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. Insulated staples protect and secure Romex, NM, BX and UF. PVC insulation protects cable from damage due to mis-hit and overdriving, prevents a short circuit if wire insulation is damaged. Highly visible color coded for size and application. Card/40.
Gardner Bender PS-1575T2 Insulated Cable Staple Gardner Bender PCS-1600T Low Voltage Masonry Staple Gardner Bender PSW Low Voltage Cable Staple
For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. Hardened nails can penetrate cement block, mortar or plaster surfaces. For cable TV and other hard-surface installation. Plastic cradle provides added protection to cable jackets. Freeze resistant. UV protected. (Black). Secures RG-49, RG-59 and RG-6 coaxial cables. PCS-1600 has clip-on feature. For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed.
Gardner Bender PSW Low Voltage Cable Staple Gardner Bender PSW Cable Staple Gardner Bender MSI Insulated Cable Staple
For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. Use on NM, BX, UF and other electrical cables. Made from high carbon steel. Cable protected by polyethylene insulation.
Gardner Bender PR Low Voltage Cable Staple Gardner Bender PDS Low Voltage Cable Staple Gardner Bender PSB Low Voltage Cable Staple
For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed. UV resistant polyethylene saddles, zinc plated nails. Used for inside and outside applications. Clip-on feature enables hands-free installation. Secures multiple RG-59, RG-59. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage.
AmerTac Zenith VM1020NAW Coaxial Staple King 70112 Insulated Cable Staple Gardner Bender GSE-310 Service Entrance Staple
Attaches coax cable to a wall. .5" height x .25" width x .25" depth. Made of 12 gauge carbon steel, insulated with high-impact, hot-melt PVC bonded to the top of the staple, tumble deburred and with rust inhibitor applied. Reduces risk of electrical fire and prevents a short circuit if the insulation is cut. Color coded for size and application and highly visible. Used with BX or Romex 3 conductor, #14, #12, and #10 WG or 2 stacked oval Romex #14 and #12 WG. Rated for up to 2500 volt. Dielectric rating per ETL Test 525777. Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing.
STAPLES LW VOLT GUN 1/4IN     STAPLES LW VOLT GUN 5/32IN WD Gardner Bender PMW Low Voltage Cable Staple
STAPLES LW VOLT GUN 1/4IN
Our Price : $3.99
For securing speaker, telephone, bell and other low-volt wire. Polyethylene saddle won't rust, rot or deteriorate. Zinc-plated nail resists rust and corrosion. 1 nail per staple. Dives in with a hammer. UL Listed.
Gardner Bender PS-150 Insulated Cable Staple Gardner Bender PS-150Z Insulated Cable Staple Gardner Bender GSE-410 Service Entrance Staple
For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. Secures service entrance cable. Pointed offset legs drive in straight, will not split wood. High quality carbon steel for durability and easy nailing.
Gardner Bender PS-175ZN Insulated Cable Staple Gardner Bender PSB Low Voltage Cable Staple Gardner Bender PS-175 Insulated Cable Staple
For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. For metallic and non-metallic cording and cable. Constructed of high-grade injection molded polyethylene cradles and zinc-plated nails. Provides toughness, high dielectric strength and longevity. Smooth saddles hold wire securely while preventing damage. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening.
Gardner Bender PS-175J Insulated Cable Staple Gardner Bender PS-225J Insulated Cable Staple Gardner Bender MCS-20W Multi Cable Cable Spacer
For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. For metallic and non-metallic cording and cable. Easy to install; drive both zinc plated nails together without splitting wood. Recessed nail heads for minimum exposure. Smooth saddle (3/8" width) prevents damage to insulation. High grade, injection molded polypropylene resists rot, rust, deterioration and effects of extreme temperature; non-conductive for safe and secure cable fastening. Organizes and secures multiple cable runs on a stud. Secures NM/Romex, coaxial and CAT 5 all on the same staple. Snap lock gate quickly and easily secures all cables. Self-centering tab guides perfect placement on the stud. Secures with a nail or staple for wood studs. Cable combinations (8) NM-B Flat 14-2.
Cable Boss MPS Cable Staple Cable Boss MPS Cable Staple Gardner Bender MS-500J Cable Staple
Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun. Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun. Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable.
Gardner Bender MS-450J Cable Staple Cable Boss MPS Insulated Cable Staple 3M 49554 Stak-It Cable Stackers
Two-wire staples fasten 2 and 3 conductor non-metallic cable. SIZE: 1/2" x 1" - For 2 conductor (No. 12 and No. 14) NM cable. SIZE: 9/16" x 1-1/4" - For 3 conductor (No. 10 and No. 12) NM, BX, UF and other cable. Smooth color saddle prevents damage to insulation. Secures round and flat cable. Legs have 2 barbs for holding strength in wood. For use in CableBoss staple gun. Designed to meet the spacing requirements of the 1990 National Electrical Code, article 300-4-(d). Allows installation of multiple NM cables on one side of a 2x4. Accepts a wide range of flat NM cables, from 1 number 14-2 AWG to 1 number 10-2 AWG. Also accepts round cables up to .30" diameter. Spaces cables to center of standard 2x4. Reduce potential heating that could occur if cables are stacked under a single fastening device. Dresses wires for professional look in exposed areas, such as panel boxes. Easy installation - cables snap in for positive lock. Simplifies cable identification. Made from reclaimed plastic.
Gardner Bender GSE Insulated Service Entrance Staple Snap-Pak 122652 Insulated Staple Snap-Pak 122651 Insulated Staple
Polyethylene plastic insulated staples are stabilized against UV rays and extreme cold; withstand deterioration and breakage to secure number 6 SER service entrance cable. Electro-zinc plated nails for strength and durability. Card/5. Used to secure low voltage wiring or coaxial cable. Used to secure low voltage wiring or coaxial cable.
Snap-Pak 122659 Wire Staple STAPLE NAIL COAX BLACK 20PC   STAPLE NAIL FLAT CABLE WHITE
Used to secure coaxial cable. Attaches coax cable to a wall. .5" height x .25" width x .25" depth. Secure phone cord to nailable surface. 20 piece set to attach flat phone cord to the wall or any other sturdy platform.
GUN STAPLE LOW VOLT           Gardner Bender PTP Data Cable Staple Gardner Bender PSW-3650 Cable Staple
GUN STAPLE LOW VOLT
Our Price : $18.99
Secures RJ-11; RJ-12; RJ-45; Cat 3 and 5 and other datacom wires. Protects wire insulation. Will not rust, crack or deteriorate. Corrosion resistant zinc plated nail for indoor/outdoor use. UV resistant saddle. Secures cable including RG-59 and RG-6 types.
Gardner Bender PCS-3600 Low Voltage Masonry Staple Cableboss MSG-501L 3-in-1 Staple Gun
Hardened zinc plated nails penetrates cement block, plaster and mortar, secures RG-59, RG-6 and RG-6Q cables. UV protected. Clip-on strap permits hands free installation. Can shoot 3 size coverings, NM, Coax, voice/data and low volt staples from the same gun without any adjustments. Cable guide for continuous stapling. Ergonomic design, high impact plastic construction. Can use MPS-2080, 5/16" blue staples, SKU 655.8894, MPS-2100  3/8" white staples, SKU 055.9039 and PS-2125V 1/2" black staples, SKU 574.6821.
   
 
1