Home > ELECTRICAL > ROUGH ELECTRICAL > ELECTRICAL FITTINGS > GROUNDING RODS/CLAMPS
Sort By:
1
Halex 16010B Ground Clamp Gardner Bender GGS-1512R Ground Screw Eritech CP58 Acorn Standard Duty Ground Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Green round washer head screw for switch and outlet boxes. Connects grounding wire to the grounding rod. UL and CSA Listed for 1/2" and 5/8" ground rods and number 4 rebar and accept a conductor range from number 10 solid to number 2 stranded.
Halex 93591 Ground Clamp Eritech ZWP1J Grounding Pipe Clamp Gardner Bender GGC-1508 Ground Clip
Connects grounding wire to the grounding rod. Bolted water pipe clamps made of zinc die-cast. Wire range 8 sol. - 2 str. UL Listed. Connects grounding wire to the grounding rod. For aluminum or copper grounding wire zinc plated.
Gardner Bender GGP-1502 Grounding Pigtail Fishock GRC-FS Ground Clamp Gardner Bender 14-GRC Ground Clamp
AWG solid number 12 wire. 8" long with captured screw, other end bare fork terminal. Helps to make a superior connection of ground wire to ground rod. Heavy duty construction for long usage. Connects grounding wire to the grounding rod.
Halex 36010 Ground Clamp Eritech CWP1J Grounding Pipe Clamp Halex 93592 Ground Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Bolted water pipe grounding clamp. UL listed. Made of corrosion-resistant copper alloy. Connects grounding wire to the grounding rod.
Halex 36019 Ground Clamp Square D PK7GTACP Ground Bar Kits Eritech CWP1JU Grounding Pipe Clamp
Indoor or outdoor applications. Use to secure the grounding wire to a 1/2" through 1" pipe. UL Listed. Wire size fits #10 - #2 AWG. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed.
Halex 63299 Ground Screw Square D PK12GTACP Ground Bar Kits Schneider PK9GTACP Ground Bar Kit
Indoor or outdoor applications. Use to ground a wiring device to a steel outlet box. Green color. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Eritech EK17 Direct Burial Perpendicular Ground Clamp Eritech EK16 Direct Burial Ground Clamp Cutler-Hammer GBK10P Ground Bar Kits
Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed. Bronze alloy grounding clamp with bronze screws. Used for rebar, ground rods, water pipes and direct-burial water pipe. Lay-in feature cuts installation time. Approved for direct burial in earth and concrete. Pipe range from 1/2" (12.7 mm) to 1" (25.4 mm). Rebar range from #4 (10 mm) to #8 (25 mm). Ground rod range from 1/2" (12.7 mm) to 1" (25.4 mm). Conductor range from #10 (5.5 mm sq) to #2 (25 mm sq). UL listed. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed.
Siemens EC2GB152 Ground Bar Kit With Terminal 2/0 Lug Erico 815860UPC Grounding Rods Halex 36020 Ground Clamp
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Wire size fits #10 - #2 AWG. Use to secure the grounding wire to a 1-1/4" - 2" or 2-1/2" - 4" pipe. Bronze. UL Listed.
Schneider PK18GTACP Ground Bar Kit Cutler-Hammer GBK14P Ground Bar Kits Square D PK23GTACP Ground Bar Kits
Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. Bar wire holes are suitable for (1) #14-4 or up to (3) #14-10 aluminum or copper wire. Multiple wires in a single hole must be of the same size and material. Distance between mounting holes is 1-3/4". NOTE: Consult local code for correct application of ground bar kit for service entrance equipment. Kit contains one ground bar and two #10-32 x 5/8" self-threading screws. UL Listed. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed.
Eritech 615840UPC Grounding Rod Square D PK15GTACP Ground Bar Kits Siemens EC3GB302 Ground Bar Kit With Terminal 2/0 Lug
Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1. Used in load centers, CSED devices and NQOD and NF panel boards. Each terminal accepts (1) #14 - #4 copper wire or (1) #12 - #4 aluminum wire, (2) #14 - #12 copper wire or (2) #12 - #10 aluminum wire. NOTE - Consult local code for correct application of ground bar kit for service entrance equipment. ANSI Certified and UL Listed. For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1.
Siemens Energy ECGB10 Ground Bar Kits Eritech 815880UPC Grounding Rod Eritech 611380UPC Grounding Rod
For equipment grounding provision. #14 to 4 AWG, 60/75 degree Celsius, Cu/A1. Zinc-coated exteriors are hot-dip galvanized for solid protection against corrosion in accordance with ASTM specification A153-78. Surfaces are rigidly inspected to eliminate seams, slivers and other defects. Meet EEI-NEMA TDJ-30 and are REA listed. 15 year service life in most soils. Galvanized plated steel. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1.
Eritech CWP2J Grounding Pipe Clamp Eritech 615880UPC Grounding Rod Erico IBTB Intersystem Bonding Termination
Bolted water pipe clamps made from high-strength corrosion-resistant copper alloy. Connects grounding wire to the grounding rod. Range 10 solid - 2 stranded. UL Listed. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1. Intersystem bonding termination for residential and small commercial facilities. Meets the requirements of 2008 NEC Article 250.94.  Accommodates (5) 14 - 2 AWG bonding conductors and (1) 6 - 2 AWG grounding electrode conductor. Integral mounting base for easy installation. The polymeric base and housing is impact-resistant, UV-stabilized and meets UL requirements for weatherability performance. Includes corrosion-resistant, stainless steel mounting hardware. Connects to grounding electrode conductor - does not rely on meter base enclosure bonding connection. 1.41" depth x 2.01" width x 4.5" length. cULus Listed.
Gardner Bender GGP-1261 Grounding Pigtail Eritech EDS58 Drive Sleeve Erico 615800UPC Grounding Rods
AWG number 12 solid wire. 6-1/2" long with captured screw, other end stripped. The driving head fits over the ground rod to protect the rod end from "mushrooming" as the ground rod is driven into earth. Copperbonded, resists corrosion better than galvanized rods, allowing for a 30-year service life in most soils. Uniform plating thickness, average tensile strength of 80,000 psi and straightness tolerance of .010" per linear foot. Exceeds the requirements of ANSI/UL 467-1984, CSA, and ANSI/NEMA GR-1.
Raco 975 Ground Clip
For grounding switch and outlet boxes using non-metallic sheathed cables from No. 14 to No. 10.
   
 
1