Home > PAINT & SUNDRIES > SUNDRIES > HOUSEHOLD GLUES > WOOD GLUE
Sort By:
1
Franklin Titebond Original Wood Glue Elemer's E7000 Wood Glue Franklin Titebond II Weatherproof Wood Glue
Use to bond wood, hardboard, particleboard, leather, cloth and most other porous materials. Strong initial tack. Superior strength, fast drying time and sandable. Heat and solvent-resistance. Conforms to ASTM D-4236. For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic. Use for woodworking projects including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Strong initial tack. Resists solvents, heat and water. Sands easily without softening. Safe to use. Easy water clean up. Environmentally safe. FDA approved for indirect food contact (cutting boards).
Franklin Titebond Original Wood Glue GLUE WOOD GORILLA 4OZ         Elmers E7010 Pourable Interior Carpenters Wood Glue
Use to bond wood, hardboard, particleboard, leather, cloth and most other porous materials. Strong initial tack. Superior strength, fast drying time and sandable. Heat and solvent-resistance. Conforms to ASTM D-4236. Ideal for use on hardwoods, softwoods, and natural wood composites. Water resistant. Dries a natural. Clamp time: 20-30 Minutes. Open Time: 5-10 Minutes. 80-percent dry in 1-2 Hours. Full cure in 24 hours. No foaming. Passes ANSI/HPVA Type II. For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic.
Franklin Titebond Original Wood Glue Franklin 5012 Titebond Wood Glue Titebond 6123 Polyvinyl Acetate Emulsion Translucent Wood Glue
Use to bond wood, hardboard, particleboard, leather, cloth and most other porous materials. Strong initial tack. Superior strength, fast drying time and sandable. Heat and solvent-resistance. Conforms to ASTM D-4236. Ready to use, no heating or mixing required. Long assembly time, exceptional strength and unique crackling effect on wood. Provides superior creep-resistance, offers excellent sandability and is unaffected by finishes. Sensitivity to moisture allows for easy disassembly of parts, a critical benefit in antique restoration or the repair of musical instruments. For general household and woodworking projects. Provides a invisible glue line and bonds stronger than the wood. Strong tack and fast speed of set helps reduce clamp time. Unaffected by finishes and sands easily. Non-toxic and cleans up with water. Conforms to ASTM D-4236.
Franklin Titebond III Ultimate Wood Glue GLUE WOOD GORILLA 8OZ         Franklin Titebond II Weatherproof Wood Glue
Non-toxic, solvent-free, 1-part, cleans up with water. Safer to use than traditional waterproof wood glues, and offers superior bond strength. Provides strong initial tack, sands easily without softening. Longer open assemble time, lower application temperature, unaffected by finishes. Passes ANSI/HPVA Type I water-resistance specifications. FDA approved for indirect food contact, such as cutting boards. Conforms to ASTM D-4236. 4000 PSI bond strength at room temperature on 57-percent wood failure. 10-min. assembly time after application. Ideal for use on hardwoods, softwoods, and natural wood composites. Water resistant. Dries a natural. Clamp time: 20-30 Minutes. Open Time: 5-10 Minutes. 80-percent dry in 1-2 Hours. Full cure in 24 hours. No foaming. Passes ANSI/HPVA Type II. Use for woodworking projects including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Strong initial tack. Resists solvents, heat and water. Sands easily without softening. Safe to use. Easy water clean up. Environmentally safe. FDA approved for indirect food contact (cutting boards).
Titebond 3703 Cross-Linking Polyvinyl Acetate Dark Wood Glue Franklin Titebond No-Run No-Drip Wood Glue Elmer's E7290 Wood Glue Max Carpenter's Wood Glue
For darker woods. Provides strong initial tack and fast speed of set to reduce clamp time. Dries to a dark brown glue line which blends better with some selected wood species. Sandable and is unaffected by finishes. Provides resistance to heat, solvents and mildew. Ideal for both hardwoods and softwoods. Non-toxic, solvent free and cleans up with water. For wood, pottery, ceramic, stone, glass, fabrics, leather and most craft-type materials. Extra-thick formula helps fill small cracks and gaps. Provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. Sandable. Unaffected by finishes. Dries clear. Contains real wood fibers for stainability. 100-percent waterproof. Resists heat, mold and mildew. Sandable, paintable and stainable. Water clean-up. Non-toxic.
Elmers E7300 Max Pourable Stainable Carpenters Wood Glue Franklin Titebond II Weatherproof Wood Glue ADHESIVE WOOD .85OZ
Contains real wood fibers for stainability. 100-percent waterproof. Resists heat, mold and mildew. Sandable, paintable and stainable. Water clean-up. Non-toxic. Use for woodworking projects including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Strong initial tack. Resists solvents, heat and water. Sands easily without softening. Safe to use. Easy water clean up. Environmentally safe. FDA approved for indirect food contact (cutting boards). Creates a professional-strength bond that works on all wood types. Sets in 30 seconds and is ready to plane, sand, or stain in just 30 minutes, minimizing clamping time. Repositionable for up to three minutes. Bonds to other surfaces, like ABS, melamine, particle board, rubber, steel, PVC, glass, stone, and more. Fine-Tip Applicator. No Activator Needed.
Dap 00490 Weldwood Carpenter's Wood Glue Elmers E7020 Pourable Interior Carpenters Wood Glue GLUE WOOD GORILLA 18OZ
Aliphatic resin wood and multi-purpose glue providing a high strength bond. Sets fast, grips tight, sands easily when dry. Heat, water and solvent resistant. Non-toxic, low VOC. For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic. Ideal for use on hardwoods, softwoods, and natural wood composites. Water resistant. Dries a natural. Clamp time: 20-30 Minutes. Open Time: 5-10 Minutes. 80-percent dry in 1-2 Hours. Full cure in 24 hours. No foaming. Passes ANSI/HPVA Type II.
Franklin 2404 Titebond Wood Glue Franklin Titebond Original Wood Glue Franklin Titebond Hide Glue
For finish trim, crown molding, baseboards, window casings and other applications requiring a professional strength. No-run, no-drip wood glue. Extra-thick formula helps fill small cracks and gaps. Provides a strong initial tack and fast speed of set, yet allows realignment of working pieces. Sandable. Unaffected by finishes. Dries translucent. Use to bond wood, hardboard, particleboard, leather, cloth and most other porous materials. Strong initial tack. Superior strength, fast drying time and sandable. Heat and solvent-resistance. Conforms to ASTM D-4236. Ready to use, no heating or mixing required. Long assembly time, exceptional strength and unique crackling effect on wood. Provides superior creep-resistance, offers excellent sandability and is unaffected by finishes. Sensitivity to moisture allows for easy disassembly of parts, a critical benefit in antique restoration or the repair of musical instruments.
Franklin Titebond III Ultimate Wood Glue Elmers E7310 Max Pourable Carpenters Wood Glue Titebond 3704 Cross-Linking Polyvinyl Acetate Dark Wood Glue
Non-toxic, solvent-free, 1-part, cleans up with water. Safer to use than traditional waterproof wood glues, and offers superior bond strength. Provides strong initial tack, sands easily without softening. Longer open assemble time, lower application temperature, unaffected by finishes. Passes ANSI/HPVA Type I water-resistance specifications. FDA approved for indirect food contact, such as cutting boards. Conforms to ASTM D-4236. 4000 PSI bond strength at room temperature on 57-percent wood failure. 10-min. assembly time after application. Contains real wood fibers for stainability. 100-percent waterproof. Resists heat, mold and mildew. Sandable, paintable and stainable. Water clean-up. Non-toxic. For darker woods. Provides strong initial tack and fast speed of set to reduce clamp time. Dries to a dark brown glue line which blends better with some selected wood species. Sandable and is unaffected by finishes. Provides resistance to heat, solvents and mildew. Ideal for both hardwoods and softwoods. Non-toxic, solvent free and cleans up with water.
Franklin Titebond III Ultimate Wood Glue BOTTLE GLUE REUSABLE 16OZ     Franklin 6311 Titebond Wood Adhesive Activator
BOTTLE GLUE REUSABLE 16OZ
Our Price : $7.99
Non-toxic, solvent-free, 1-part, cleans up with water. Safer to use than traditional waterproof wood glues, and offers superior bond strength. Provides strong initial tack, sands easily without softening. Longer open assemble time, lower application temperature, unaffected by finishes. Passes ANSI/HPVA Type I water-resistance specifications. FDA approved for indirect food contact, such as cutting boards. Conforms to ASTM D-4236. 4000 PSI bond strength at room temperature on 57-percent wood failure. 10-min. assembly time after application. Designed with 2-chamber system that pushes glue from the bottom up through the secondary side chamber which ensures fresh glue every time. Replaceable tips and cap storage. Dispenses glue from the bottom first and both horizontal and vertical position. Can be filled with yellow glue, wood glue or other liquids. Includes blade tip, Yorker tip and red cap. Glue not included Accelerates the curing of all Titebond Instant Bond Adhesives. Effective for large gaps, very porous woods and bridge bonding joints, bonding acidic surfaces or in low humidity conditions. heptane-based solvent that will not mar finishes or damage plastics. 3 cps viscosity.
Dap 00491 Weldwood Carpenter's Wood Glue ADHESIVE WOOD 4OZ             Franklin 6231 Titebond Wood Adhesive Gel
Aliphatic resin wood and multi-purpose glue providing a high strength bond. Sets fast, grips tight, sands easily when dry. Heat, water and solvent resistant. Non-toxic, low VOC. Creates a professional-strength bond that works on all wood types. Sets in 30 seconds and is ready to plane, sand, or stain in just 30 minutes, minimizing clamping time. Repositionable for up to three minutes. Bonds to other surfaces, like ABS, melamine, particle board, rubber, steel, PVC, glass, stone, and more. Fine-Tip Applicator. No Activator Needed. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for repairing hair line cracks and small defects in wood and repairing loose veneer edges.  Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 5000 cps viscosity product offers the longest assembly time of 30 seconds and an initial cure speed of 20 seconds. NOT recommended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 3. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested.
Franklin 6201 Wood Adhesive Elmers E7040 Pourable Interior Carpenters Wood Glue Dap 00203 Weldwood Wood Glue
Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for repairing hair line cracks and small defects in wood and repairing loose veneer edges. Also can be used as a finish. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 5 cps viscosity offers an assembly time of 5 seconds and an initial cure speed of 3 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 1. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic. Powdered, pre-catalyzed water-activated glue designed to provide strong, durable bonds for wood and wood products. For veneering, cabinet work, general woodworking applications, laminating, edge gluing, chopping blocks, counter tops, furniture, cutting boards and plates. Bonds laminates to wood, particleboard and plywood. Forms a high strength, water-resistant bond. Resistant to fungi, bacteria, oil, gasoline, or solvents. One pound adhesive powder plus water at .0006 inch glue line covers about 40 sq. ft.
Franklin 6211 Wood Adhesive Franklin 6221 Titebond Wood Adhesive Franklin Titebond II Weatherproof Wood Glue
Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications and for soaking end-grain to prevent splitting. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 120 cps viscosity offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 2. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. An activator must be applied to the surface before using this item. See SKU # 290.4241 for activator. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp and bonding end-grain in a miter joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 1500 cps viscosity offers an assembly time of 10 seconds and an initial cure speed of 8 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 3. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. Use for woodworking projects including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Strong initial tack. Resists solvents, heat and water. Sands easily without softening. Safe to use. Easy water clean up. Environmentally safe. FDA approved for indirect food contact (cutting boards).
Dap 00492 Weldwood Carpenter's Wood Glue Franklin 6212 Wood Adhesive Franklin 6202 Wood Adhesive
Aliphatic resin wood and multi-purpose glue providing a high strength bond. Sets fast, grips tight, sands easily when dry. Heat, water and solvent resistant. Non-toxic, low VOC. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for filling knots and voids in wood, adhering pen tubes to blanks for pen turning applications and for soaking end-grain to prevent splitting. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 120 cps viscosity offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 2. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for repairing hair line cracks and small defects in wood and repairing loose veneer edges. Also can be used as a finish. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 5 cps viscosity offers an assembly time of 5 seconds and an initial cure speed of 3 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 1. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested.
Franklin 6222 Titebond Wood Adhesive Titebond 5066 Aliphatic Resin Emulsion Original Wood Glue Franklin Titebond III Ultimate Wood Glue
An activator must be applied to the surface before using this item. See SKU # 290.4241 for activator. Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp and bonding end-grain in a miter joint application, quick assembly of jigs and fixtures, adhering turning blocks to scrap blocks on a faceplate for immediate use. Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 1500 cps viscosity offers an assembly time of 10 seconds and an initial cure speed of 8 seconds. NOT intended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 3. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. Use to bond wood, hardboard, particleboard, leather, cloth and most other porous materials. Strong initial tack. Superior strength, fast drying time and sandable. Heat and solvent-resistance. Conforms to ASTM D-4236. Non-toxic, solvent-free, 1-part, cleans up with water. Safer to use than traditional waterproof wood glues, and offers superior bond strength. Provides strong initial tack, sands easily without softening. Longer open assemble time, lower application temperature, unaffected by finishes. Passes ANSI/HPVA Type I water-resistance specifications. FDA approved for indirect food contact, such as cutting boards. Conforms to ASTM D-4236. 4000 PSI bond strength at room temperature on 57-percent wood failure. 10-min. assembly time after application.
Franklin Titebond II Weatherproof Wood Glue Elemer's E7050 Wood Glue Titebond 3706 Cross-Linking Polyvinyl Acetate Dark Wood Glue
Use for woodworking projects including outdoor furniture, birdhouses, mailboxes, planters and picnic tables. Strong initial tack. Resists solvents, heat and water. Sands easily without softening. Safe to use. Easy water clean up. Environmentally safe. FDA approved for indirect food contact (cutting boards). For interior repair and building projects. Sandable and paintable. Goes on yellow, dries yellow. Water clean-up. Non-toxic. For darker woods. Provides strong initial tack and fast speed of set to reduce clamp time. Dries to a dark brown glue line which blends better with some selected wood species. Sandable and is unaffected by finishes. Provides resistance to heat, solvents and mildew. Ideal for both hardwoods and softwoods. Non-toxic, solvent free and cleans up with water.
Franklin 6232 Titebond Wood Adhesive Gel Franklin Titebond III Ultimate Wood Glue Elmer's E7330 Wood Glue Max Carpenter's Wood Glue
Provides a strong, permanent bond. Ideal for hard to reach joints or surface areas that are difficult to clamp, for repairing hair line cracks and small defects in wood and repairing loose veneer edges.  Designed primarily for wood and wood products. Also effective on a wide variety of materials and substrates. 5000 cps viscosity product offers the longest assembly time of 30 seconds and an initial cure speed of 20 seconds. NOT recommended for Exterior use or where moisture is likely. MIL Spec (A46050C) Type II, Class 3. Between 2800 and 4200 psi shear strength at room temperature depending on substrate tested. Non-toxic, solvent-free, 1-part, cleans up with water. Safer to use than traditional waterproof wood glues, and offers superior bond strength. Provides strong initial tack, sands easily without softening. Longer open assemble time, lower application temperature, unaffected by finishes. Passes ANSI/HPVA Type I water-resistance specifications. FDA approved for indirect food contact, such as cutting boards. Conforms to ASTM D-4236. 4000 PSI bond strength at room temperature on 57-percent wood failure. 10-min. assembly time after application. Contains real wood fibers for stainability. 100-percent waterproof. Resists heat, mold and mildew. Sandable, paintable and stainable. Water clean-up. Non-toxic.
Dap 00204 Weldwood Wood Glue Dap 00493 Weldwood Carpenter's Wood Glue
Powdered, pre-catalyzed water-activated glue designed to provide strong, durable bonds for wood and wood products. For veneering, cabinet work, general woodworking applications, laminating, edge gluing, chopping blocks, counter tops, furniture, cutting boards and plates. Bonds laminates to wood, particleboard and plywood. Forms a high strength, water-resistant bond. Resistant to fungi, bacteria, oil, gasoline, or solvents. One pound adhesive powder plus water at .0006 inch glue line covers about 40 sq. ft. Aliphatic resin wood and multi-purpose glue providing a high strength bond. Sets fast, grips tight, sands easily when dry. Heat, water and solvent resistant. Non-toxic, low VOC.
   
 
1