Home > FASTENERS > NUTS, BOLTS, SCREWS > ANCHORS > ANCHORS - MASONRY
Sort By:
1
Cobra 242S Double Expansion Short Lag Shield Cobra 243S Double Expansion Short Lag Shield Cobra 253S Double Expansion Long Lag Shield
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
Cobra 252S Double Expansion Long Lag Shield Cobra 211S Lead Anchor Cobra 215S Lead Anchor
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Corrosion resistant. It is internally threaded and it installs flush to surface. Corrosion resistant. It is internally threaded and it installs flush to surface.
Cobra 244S Double Expansion Short Lag Shield Parasleeve 450N Sleeve Anchor Parasleeve 448N Sleeve Anchor
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
Parawedge 496N Wedge Anchor Parawedge 498N Wedge Anchor Cobra 254S Double Expansion Long Lag Shield
Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
Parawedge 501N Wedge Anchor Tapcon 50403 Concrete Anchor Tapcon 24192 Concrete Anchor
Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
Parasleeve 451N Sleeve Anchor Tapcon 24193 Concrete Anchor Parawedge 503N Wedge Anchor
Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
Cobra 384V Drive Nail-In Anchor Tapcon 50404 Concrete Anchor Parawedge 502G Wedge Anchor
One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
Parasleeve 452G Sleeve Anchor Parawedge 504G Wedge Anchor Parasleeve 441R Sleeve Anchor
Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces.
Cobra 385V Drive Nail-In Anchor Tapcon 50426 Concrete Anchor Cobra 386V Drive Nail-In Anchor
One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture.
Cobra 381V Drive Nail-In Anchor Cobra 383V Drive Nail-In Anchor Cobra 252M Double Expansion Long Lag Shield
One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. One-step installation. Anchor size = hole size. Corrosion resistant. Can be installed through fixture. Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
Parawedge 491R Wedge Anchor SuperSleeve 603R Sleeve Anchor SuperSleeve 607R Sleeve Anchor
Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs. Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
Cobra 253M Double Expansion Long Lag Shield REDHEAD WEDGE ANCHOR 1/4X2-1/4 Parawedge 492R Wedge Anchor
Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
Red Head 50126 Drop-In Anchor SuperSleeve 609R Sleeve Anchor Cobra 242M Double Expansion Short Lag Shield
For fastening applications in solid concrete. Contractor grade anchors. Internally threaded. Applications: Overhead applications, transformers and meters, ceiling fans, electrical light fixtures. Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs. Can be used in all types of masonry. Corrosion resistant. It is internally threaded and installs flush to surface.
Red Head 11019 Wedge Anchor Parasleeve 449R Sleeve Anchor SuperSleeve 617R Sleeve Anchor
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs.
Tapcon 24292 Concrete Anchor SuperSleeve 619R Sleeve Anchor Parawedge 495R Wedge Anchor
Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Can be removed and reinstalled. Torque controlled expansion. Made of grade 5 steel, bolt increases the shear load by 30%. A masonry drill bit is included in all packs. Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces.
Parawedge 496R Wedge Anchor Red Head 50125 Drop-In Anchor Red Head 35303 Hammer Set Anchor
Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. For fastening applications in solid concrete. Contractor grade anchors. Internally threaded. Applications: Overhead applications, transformers and meters, ceiling fans, electrical light fixtures. For fastening applications in concrete, block, and brick. Applications: Brackets, drywall track, gutters and down spouts, electrical boxes.
Red Head 35305 Hammer Set Anchor Parasleeve 447M Sleeve Anchor REDHEAD WEDGE ANCHOR 5/8X5 10P
For fastening applications in concrete, block, and brick. Applications: Brackets, drywall track, gutters and down spouts, electrical boxes. Pre-assembled, all-purpose medium duty anchor. One-step installation. Anchor size = hole size. Corrosion resistant. A masonry drill bit is included in all "R" packs of 4 pieces. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Parawedge 501R Wedge Anchor Red Head 02041 Wedge Anchor Tapcon 24293 Concrete Anchor
Parabolically curved for a smoother expansion, it also has a torque controlled expansion and can be installed into a bottomless hole. It is cold formed to increase its strength and has a 360-degree clip for more contact. ICC-ES approved (ESR-3852) for all sizes in cracked and uncracked concrete - all sizes. A masonry drill bit is included in all "R" packs of 4 pieces. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required.
Red Head 11285 Sleeve Anchor Tapcon 11413 Concrete Anchor Red Head 11272 Wedge Anchor
For fastening applications in concrete, hollow block, grout filled block and brick. Contractor grade anchors. Anchor diameter equals hole diameter. Applications: Machinery and supports, window frames, partitions, cabinets and shelves, duct straps, pipe support. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Red Head 11270 Wedge Anchor REDHEAD WEDGE ANCHOR 3/4X5.5IN Red Head 11273 Wedge Anchor
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Red Head 11021 Wedge Anchor Tapcon 11414 Concrete Anchor REDHEAD WEDGE ANCHOR 5/8X7 10P
Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames. Secure attachment to concrete, block and brick. One piece design requires no assembly, does not require anchor torque-down, cracked and seismic approved. Blue ClimaSeal adds corrosion resistance. ANSI drill bit required. Heavy-duty anchors designed for fastening applications in solid concrete. They feature a versatile fully threaded design and a corrosion resistant, one piece stainless steel clip. Supplied complete with nut and washer. Applications: 2 x 4's, sill plates, electrical equipment, and attaching structural supports to concrete, tilt-up construction, highway rails and posts, HVAC and plumbing systems, metal doors, and window frames.
Midwest 04133 Wedge Anchor Midwest 04136 Wedge Anchor Midwest 04175 Short Lag Shield
Midwest Wedge Anchor, Heavy Duty, 5/8 in Anchor, 3-1/2 in Anchor, Zinc Plated Midwest Wedge Anchor, Heavy Duty, 5/8 in Anchor, 6 in Anchor, Zinc Plated Midwest Lag Shield, Short, 1/4 in Anchor, Lead Alloy, Zinc Plated, For Mortar and Concrete
Midwest 04140 Wedge Anchor Midwest 04178 Short Lag Shield Midwest 04185 Long Lag Shield
Midwest Wedge Anchor, Heavy Duty, 3/4 in Anchor, 4-1/4 in Anchor, Zinc Plated Midwest Lag Shield, Short, 1/2 in Anchor, Lead Alloy, Zinc Plated, For Mortar and Concrete Midwest Lag Shield, Long, 1/4 in Anchor, Drill Bit Size 3/4 in, Lead Alloy, Zinc Plated, For Mortar and Concrete
Midwest 04176 Short Lag Shield Midwest 04127 Wedge Anchor Midwest 04128 Wedge Anchor
Midwest Lag Shield, Short, 5/16 in Anchor, Lead Alloy, Zinc Plated, For Mortar and Concrete Midwest Wedge Anchor, Heavy Duty, 1/2 in Anchor, 2-3/4 in Anchor, Zinc Plated Midwest Wedge Anchor, Heavy Duty, 1/2 in Anchor, 3-3/4 in Anchor, Zinc Plated
Midwest 04186 Long Lag Shield Midwest 04124 Wedge Anchor Midwest 04177 Short Lag Shield
Midwest Lag Shield, Long, 5/16 in Anchor, Drill Bit Size 3/4 in, Lead Alloy, Zinc Plated, For Mortar and Concrete Midwest Wedge Anchor, Heavy Duty, 3/8 in Anchor, 2-3/4 in Anchor, Zinc Plated Midwest Lag Shield, Short, 3/8 in Anchor, Lead Alloy, Zinc Plated, For Mortar and Concrete
Midwest 04188 Long Lag Shield Midwest 04130 Wedge Anchor Midwest 04125 Wedge Anchor
Midwest Lag Shield, Long, 1/2 in Anchor, Drill Bit Size 3/4 in, Lead Alloy, Zinc Plated, For Mortar and Concrete Midwest Wedge Anchor, Heavy Duty, 1/2 in Anchor, 5-1/2 in Anchor, Zinc Plated Midwest Wedge Anchor, Heavy Duty, 3/8 in Anchor, 3-3/4 in Anchor, Zinc Plated
Midwest 04187 Long Lag Shield Midwest 04122 Wedge Anchor
Midwest Lag Shield, Long, 3/8 in Anchor, Drill Bit Size 3/4 in, Lead Alloy, Zinc Plated, For Mortar and Concrete Midwest Wedge Anchor, Heavy Duty, 1/4 in Anchor, 3-1/4 in Anchor, Zinc Plated
   
 
1