Home > POWER TOOLS & ACC > PNEUMATIC TOOLS & ACCESSORIES > COMPRESSORS & ACCESSORIES > AIR COMPRESSOR ACCESSORIES
Sort By:
1
Stanley THREADTAPE Thread Sealant Tape Plews 21-557 Drain Cock Mintcraft FDQ910 Inflation Kit
Properly seals all male threaded connections to prevent air leaks. For use in low pressure applications. Hand tightening provides leak-proof metal to metal seal. Corrosion resistant brass. Includes: inflation adapter, tapered inflation nozzle, inflation needle, tire nozzle.
Stanley 3WAY-RND 3-Way Round Air Line Manifold Tru-Flate 41-125 3-Way 3-in-1 Air Line Manifold Tru-Flate 21-707 Safety Valve
Splits single air line into three for running multiple air tools. Use 3/8" male threaded inlet fitting for maximum performance. Aluminum. Supply three air tools from one source. Use on air hose end or as permanently fixed bench outlet. No need to disconnect/connect to use different tools. Three 1/4" NPT outlets and single 1/4" NPT inlet makes this a useful shop or bench accessory. Brass safety valves constructed to asme standards. Interchangeable with all other asme valves of the same size and pressure. 125 PSI.
Tru-Flate 24-801 Air Line Pressure Gauge Plews 41-135 Air Line Regulator with Gauge Bostitch BTFP72326 Mini Regulator and Gauge Kit
PSI 0-200  0-14 kg/cm2; mounting back. Controls in-line air pressure for paint spray guns or other pneumatic tools. Helps keep air flow at exact operating pressures. Use where precise air flow is desired. Compact, light weight, allows for easy "on the tool" air adjustment. 16psi. NPT thread size is 1/4" on both the male and the female ends. Bostitch Regulator and Gauge Kit, Mini, 1/4 in FNPT, 15 gpm, 0 - 160 psi
Plews/Edelmann 41-101 Air Tool Oilers Tru-Flate 24-343 Manual Mini Air Line Filter Tru-Flate 24-444 Mini Air Line Regulator with Pressure Gauge
Compact oiler that fastens directly to the air tool.  Precisely meters proper amount of oil to the tool only when the tool is in use.  NO adjustments necessary 1/4" male NPT outlet, 1/4" female NPT inlet.  Use on all 3/8" and 1/2" air impact guns, air wrenches, body shop air tools and pneumatic hammers. Used for all air line applications where efficient filtration is required for wear or failure of pneumatic components. Large filter element surface gives low-pressure drop and long element life. Polycarbonate bowl. Manual drain type. -10 degrees Fahrenheit to +175 degrees Fahrenheit operating temperature range.  20 SCFM, 5 micron element, 1 oz bowl capacity. 3.7" overall height. Employs solid piston and balanced poppet for long lasting performance. Solid piston is impervious to most chemicals and a wide range of lubricating oils and greases. Fast reverse flow capability allows for installation where dual pressures are required. Two gauge ports are provided and a pressure gauge is included. 250 PSI max primary operating pressure and 2 to 125 PSI max secondary operating pressure. 13 SCFM, 2.9" overall height.
Stanley Industrial Air Compressor Regulator with Gauge REGULATR TOOL AT-HAND INLN AIR Tru-Flate 41-175 Air Compressor Accessory Kit
Stanley Air Compressor Regulator, Industrial, 1/4 in NPTF, Includes: (1) Gauge Allows custom pressure settings for various tools or applications. To set required pressure, turn the regulator up to the max 140 PSI and adjust downward to required pressure each time you change the pressure setting. Adjusts while in use. No need to stop working! Specs: Supply Pressure: Minimum 150 PSI, Maximum 400 PSI, Maximum Air Flow: 25 CFM at 125 PSI. Kit contains all accessories needed to connect and use a tank-mounted air compressor. Includes: Couplers/Plugs for air line hose and air tool connections; Air line chuck for filling tire valves; Tire gauge, to check air pressure; Blowgun kit with multiple nozzles for general cleaning, drying, and clearing; Ball and tapered inflator nozzles for inflating toys and recreational equipment.
Plews 552-50AK-5 Air Hose Kit Tru-Flate 41-907 Air Tank Conversion Kit Tru-Flate 24-404 Compact Air Line Regulator with Pressure Gauge
Quality rubber air hose. 300 PSI. Comes with bonus blow gun kit . Use in  garage, shop, industry,  or home. Includes: Safety blow gun, coupler and plugs, 5 different tips. Complies with all new tank standards. Includes: chuck, 4' air hose, pressure gauge, manifold with safety and tank valve. Non-rising locking knob. Regulators have a solid piston and balanced poppet for excellent performance and longer life. Impervious to a wide range of lubricating oils, greases, most chemicals, provides accurate control, and assures smooth, uninterrupted operation. Fast reverse flow capacities. Two gauge ports are provided and a pressure gauge is included. Maximum operating pressures are 250 PSI primary and 2 to 125 PSI secondary.
Tru-Flate 24-501 Compact Air Line Lubricant Tru-Flate 24-301 Manual Compact Air Line Filter Tru-Flate 24-311 Manual Air Line Filter
Lubricators may be filled while the system is under pressure. Maximum operating pressure is: 150 PSI at 125 degrees Fahrenheit carbonate bowl. Operating temperature range is -10 degrees Fahrenheit. For pressures up to 250 PSI at 175 degrees Fahrenheit (maximum). 5 ounce bowl capacity. WARNING: Oils with adhesives, compounded oils containing solvents, graphite, detergents or synthetic oils must not be used. Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces. Filtration removes airborne solid contaminants which may cause wear or failure of pneumatic components. All filters are complete with filter element and either manual or automatic drains. Maximum operating pressure is 150 PSI at 125 degrees F with polycarbonate bowl. Bowl capacity 5 ounces.
Tru-Flate 24-414 Compact Air Line Regulator with Pressure Gauge
Polycarbonate locking knob 10.4. Accurate pressure regulation with maximum water and dirt separation are provided in a single, compact unit. The filter significantly increases the life of expensive equipment. The regulator employs a solid piston which  resists rupture, cracking or tearing under pressure or high cycle rates. Tru-Flate Regulators have fast flow capabilities. Maximum operating pressures are: 150 PSI at 125 degrees F primary, 2 to 125 PSI secondary with polycarbonate bowls; N 65 Automatic Float 40 5 oz.
   
 
1