Home > POWER TOOLS > BENCH & STATIONARY
Choose a sub category:
SCROLL SAWS TABLE SAWS POWER MITRE BOXES
BAND SAWS BENCH TILE SAWS BENCH GRINDERS
CUT OFF SAWS/CHOP SAWS DRILL PRESSES SHARPENERS
BENCH SANDERS PLANERS
Sort By:
1
Drill Doctor WSSA0002012 Replacement Abrasive Belt Kit Drill Doctor WSSA0002223 Replacement Abrasive Belt Kit Drill Doctor WSSA0002703C Replacement Abrasive Belt Kit
For use with Work Sharp Knife & Tool Sharpener only, Orgill SKU# 775.2801. Includes two each: P80 coarse grit belts, P220 medium grit belt, and 6000 fine grit belts. Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (2) P80 Coarse grit belts, (2) P220 Medium grit belts, and (2) 6000 Fine grit belts. Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with: (6) P80 Coarse grit belts for tool grinding and sharpening.
Drill Doctor WSSA0002704C Replacement Abrasive Belt Kit Drill Doctor WSSA0002705C Replacement Abrasive Belt Kit Darex/Drill Doctor DA313020GF Drill Replacement Parts
Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) P220 Medium grit belts. Replacement belt kit for use with Work Sharp Knife & Tool Sharpener. Comes with (6) 6000 Fine grit belts. Replaces sharpening wheel of 3/32" to 1/2" drill bits for Drill Doctor. Fits all GenX model drill bit sharpeners. 3 layers of nickel/diamond plating to provide long life; lasts for 200 or more sharpenings.
Drill Doctor DD350X Drill Bit Sharpener Rockwell RK7867 Bench Grinder Work Sharp WSKTS-C Knife and Tool Sharpener
Sharpens HSS, Carbide, Cobalt tin coated and Masonry bits. Sharpens bits in less than 30 seconds. Easily replaceable diamond grinding wheel sharpens 118 degree point angle size 3/32" to 1/2". On chuck alignment for simplified sharpening process. Adjustable tool rests. No Load Speed 3450/min, magnifying eye shields and spindle lock. Wheel dimensions: 6"x3/4"x1/2" arbor hole grinding wheels, wheel grit left 36#/right 60#; machine weight 29 lbs. Accessories include: (2) Work rest and (2) Abrasive grinding wheels. Sharpens straight blade knives, curved knives, tanto blades, filet knives, serrated knives, gut hooks, scissors, axes, hatchets, mower blades, garden shears, shovels and most any tool with a blade. Gives you fast, easy, precision results every time. Includes 2 guides, a 50 degree guide for hunting and outdoor knives (25 degrees per bevel) and a 40 degree guide for thinner blades and kitchen knives (20 degrees per bevel). Won't burn or damage blade steel.
Work Sharp WSKTS Knife and Tool Sharpener Drill Doctor DD500X Drill Bit Sharpener Dewalt DW756 Bench Grinder
Multi position grinding head with belt that conforms to cutting edge of any knife or tool, appropriate angle for specific knives. Flexible abrasive belts in multiple grits, creates a taper grind. Includes: Work Sharp Power Platform, belt sharpening module, kitchen knife guide, outdoor knife guide, abrasive belt kit: (P80 coarse, P220 medium, 6000 fine honing, quick start guide and instructional DVD. The model 500x is designed for durability and has the flexibility required to sharpen the largest range and most popular sizes of dull or broken bits including split points and masonry bits. With its popular "push to stop" design, the 500x splitting port won't allow your point to be over split. Ideal for a serious DIYer, hobbyist and the professional drill bit user who sharpens frequently and who works in wood and metal. The large bit and reverse twist (left hand) chucks increase this models already powerful capacities. The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 3,450 rpm no load speed, 6" wheel diameter, 1/2" spindle diameter, adjustable tool resets, length 15", weight 25.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench.
Rockwell RK7323 Table Saw Drill Doctor DD750XC Drill Bit Sharpener Drill Doctor DD750X Drill Bit Sharpener
Cuts wood, metal, plastic, aluminum and ceramic tile with ease. Sets up in seconds. Weighs only 13 lbs. 5.5 amp motor; 2,800 spm. 3/4" stroke length using a "T" shank jig saw blade. Includes blade holder, (5) T-shank assorted blades and allen key. Sharpens HSS, Carbide, Cobalt tin coated and Masonry bits. Sharpens bits in less than 30 seconds. Easily replaceable diamond grinding wheel sharpens 118 through 140 degree point angle drills sized 3/32 to 3/4". Adjustable material take off and relief settings to customize your point geometry. Cast aluminum sharpening port for added durability. Optional attachment to sharpen left hand drill bits. Increased versatility and precision control make the 750XC a top of the line pro model. What's in the box: Drill Doctor, Large Chuck, DVD, Manual and hub wrench. Permanent magnet motor produces consistent power. Push to Stop feature will not allow you to over split the bit point, adjustable material take-off, replaceable diamond sharpening wheel. Custom Point angle sharpening, choose any angle from 115 degree to 140 degrees. One chuck sharpens all sizes, 3/32"-3/4", HSS, carbide, cobalt, TiN-coated and masonry bits. Includes:  professional hard shell carrying case.
Dewalt DW758 Bench Grinder Rockwell Corded Scroll Saw Rockwell Bench Top Table Saw Leg Stand
The induction motor provides superior power for industrial grinding applications. Grinder has a rugged cast iron base and rests made of precision machined aluminum with rear exhaust ports in wheel guards and 12-1/2" distance between wheels for larger and longer grinding applications. Specs: 4.2 amps, 3/4HP, 3,600 rpm no load speed, 8" wheel diameter, 5/8" spindle diameter, adjustable tool resets, length 16", weight 39.5 lbs. Includes: 36 & 60 grit wheel, eye shields, spark deflectors, tool rests and adjustment wrench. Powerful 15 amp motor with 1.2 amp no load speed makes this a great machine for the workshop or the jobsite. Throat depth=16"; Stroke=4/5";  Cutting depth=2"; Table bevel =0-45 degrees left; Weight: 30.8 lbs; Dust blower; Dust port; Blade guard; Variable speed.  Accessories include ; Blade guard; Blade holder; Allen key; 2 blades:(1) 15 TPI;(1) 18TPI; Aluminum main table with Quick release rip fence, 0-45 degree and blade bevel. Table size 26"  x 16". Max cutting depth at 90 degree = 3" ; Max cutting depth at 45 degree = 2-1/2". Accessories include: Spanner Wrench; Blade: 10" x5/8" x 24T; Rip Fence; 45 degree Miter Gauge; Push Stick.
Work Sharp WS3000C Wood Tool Sharpener SAW COMPOUND MITER 10 INCH Hitachi C10FCH2 Sliding Compound Corded Miter Saw with Laser Marker
Chisels, plain irons, carving and lather tools, spoke shaves and more. Sharpens tools quickly and easily. Lets you sharpen chisel and plane blades up to 2" wide without any set up time. Allows you to see the cutting edge of tools while you sharpen, making sharpening of carving and lathe tools easier and more precise. 3 ways to sharpen your tools; top side with tool rest, in the chisel and plane iron port, and the Edge-Vision port. Powerful 1/5 hp motor produces a high torque max wheel speed of 580 rpm. Active air-cooled dry sharpening system has routed airflow and heat sink to sharpen without overheating or damaging the steel. Includes 2 tempered glass wheels, one slotted wheel and complete abrasives kit. Instructional DVD and user's guide included. 10" Compound miter saw with 14 amp motor, 5,200 rpm. Maximum cut capacity at 90? degree miter - 4"x4" and 2"x6" dressed lumber. Maximum cut capacity at 45? miter - 2"x4" and 1"x6" dressed lumber. Maximum cut capacity at 45? bevel - 2"x4". Miters 45 to 90 degrees; bevels 0-45 degrees. Lightweight die cast aluminum base allows for weight of 36.6 lbs. Accepts SS9100 (087.7894) leg stand and material supports. Includes dust bag, work clamp, 40th carbide tipped blade and blade wrench. Laser marker system for increased cutting accuracy. Horizontal handle, Large table, large extended fence raises to 4" for cutting crown molding vertically. Thumb actuated positive stops for quick miter adjustments. Carbon brush access, allows user to replace brush as needed  Dust collector attachment, to minimize airborne particles. Max work piece capacity is 2-5/16" H, max. by 5-21/32" W. Specs: Single-phase 120VAC 60Hz motor, 0-52 degree miter angle range to the right and left, 0-48 degree bevel angle range to the left with adjustable bevel stops. Includes: 10" tct saw blade, vice assembly with knob bolt, 10mm box wrench, 4mm hex bar wrench.
Skil Portable Table Saw Folding Stand Rockwell Shop RK7136.1 Sliding Compound Corded Miter Saw with Leg Stands Dewalt DW713 Single Bevel Compound Corded Miter Saw
Features heavy-duty folding stand for fast setup and easy transport, 3-1/2" cut height capacity cuts through 4x materials, self-aligning rip fence, miter gauge guides work pieces when making cross cuts, EZ view measurements system for accurate settings and on-tool storage for all accessories and guarding system. Die-cast aluminum table with 20in x 26in table surface extends to 20 in. x 32 in. for longer work pieces. Specs: 5/8" arbor size, neg 2-degrees to 47-degrees bevel angle range, 6' grounded cord length, 2-1/2" depth of cut at 45-degrees, 3-1/2" depth of cut at 90 degrees, 5,000 no load rpm and 120V. Includes heavy-duty folding stand, carbide-tooth blade, 2 blade wrenches, self aligning rip fence and miter gauge. Metal legs attach directly to the saw base. Lightweight, die cast aluminum base for easy transport. Includes adjustable rollers to construct infeed/outfeed support. Depth stops on the rollers allow for unlimited cuts of the same length. Preset detents for setting accurate, repeated miter cuts. Bevel adjusts from 0 to 45 degrees to accommodate most bevel cuts. Includes: dust bag and work clamp. Two-piece aluminum and Lexan guard design protects against side impact. Lexan allows user to see the blade without the glare, providing a clean line of sight. Base handle design delivers increased comfort and portability to the end user. Positive bevel stops, cam lock miter handle, adjustable stainless detent plate and precise miter system. SPECIFICATIONS: 13 amp motor, 5,000 RPM, negative 3-degree to 48-degree bevel capacity, left and right miter capacity, machined base fence support, tall sliding fence and easy access bevel lock.
Makita LS1040 Double Bevel Compound Corded Miter Saw Dewalt DW715 Single Bevel Compound Corded Miter Saw Dewalt DW716 Double Bevel Compound Corded Miter Saw
Machined aluminum base ensures accurate cuts. Performs compound cutting operations. Dual post compound pivoting arm. Bevel cuts up to 45 degrees to the left. Miter cuts 0-45 degrees left and 0-52 degrees right. Specs: Blade diameters 10", arbor 5/8", max. cutting capacity (bevel/miter) 90 degree/90 degree 2-3/4" x 5-1/8", 45 degree/45 degree 1-3/8" x 3-5/8", no load rpm 4,600, length 18-23/32", weight (lbs.) 24.2. Includes: socket wrench, carbide tipped blade, dust bag and triangular rule. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right miter capacity for greater versatility. Cam lock miter handle with miter detent override deliver quick, accurate miter angles. 4-hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Lightweight with built-in carry handle for easy portability. STANDARD EQUIPMENT: Carbide blade, extension kit, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 4,000 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 5-1/4" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat, 6-1/2" horizontal capacity crown molding lying flat, 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber max width for 45 degree miter cut capacity, 42 lbs. tool weight. Stand Not Included. Adjustable stainless steel miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree with positive stops at 0, 33.9, 45 and 48 degree both left and right allowing user to flip the saw not the material. Back fence design delivers ability to cut 2 x 10" dimensional lumber at 90 degrees and 2 x 8" at 45 degrees. Precise miter system and machined base fence support, innovative gearbox and belt-drive design for increased cutting capacity. Lightweight, head lock-down pine and built-in carrying handle. Cam lock miter handle with detent override. Designed for use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path. STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15.0 amps, 3,600 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat (10" with back fence), 6-1/2" horizontal capacity crown molding lying flat,  2 x 8" (2 x 10" with back fence) left and right for 45 degree bevel cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) for 90 degree cross-cut capacity (dimensional lumber),  2 x 8" (2 x 10" with back fence) max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber max height for 45 degree miter cut capacity, 2 x 6" (2 x 8" with back fence)  dimensional lumber max width for 45 degree miter cut capacity. 44 lbs. tool weight. Stand Not Included.
TABLE SAW 10IN WORM DRIVE SAW TABLE BARE 60V MAX 8-1/4IN Dewalt DWE7480 Table Saw
TABLE SAW 10IN WORM DRIVE
Our Price : $359.99
This wood cutting portable Worm Drive Table Saw is specifically designed for ripping. With the power and torque to tackle difficult cuts, bogging down is a thing of the past. 3-1/2" depth of cut and 25" rip capacity are big enough to rip plywood sheets in half. It also features a Dual-Field motor and smooth start-up for a saw that runs cooler and lasts longer. Weighs 49 lbs. Maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all common materials. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. The rack and pinion fence allows for fast, easy adjustments. Power-loss reset prevents accidental re-starts following a power disruption when the tool is left in the "on" position. Site-Pro Modular Guarding system allows for tool free adjustments of the guarding. Metal roll cage base offers greater durability than plastic bases. Table coating reduces friction for smoother cutting. Table coating reduces friction for smoother cutting. 5/8" arbor size. 1-3/4" depth of cut at 45 degrees. Weighs 45 lbs. Includes table saw, carbide blade, non-thru cut riving knife, push stick, miter gauge, blade guard, rip fence and (2) blade wrenches. Compact 10" job site table say with Site-Pro modular guarding system. Rack and pinion telescoping fence rails make fence adjustments fast, smooth and accurate. 24" of rip capacity, easily cuts a variety of larger shelving and trim materials. Site-Pro modular guarding system allows for tool free adjustments of the guarding components appropriate for each application. 15 amp 4800 rpm motor quickly rips through hardwoods with ease. On board storage provides easy access to the Site-Pro guarding components and push stick when not in use. Metal roll cage base offers greater durability than plastic bases. Blade can be adjusted 0-45 degrees for bevel applications. Weighing only 48 lbs., the table saw can easily be moved on and off the job. Rear feet adjust to level the saw on uneven work surfaces. Dust port allows for 2-1/2" vacuum hook up and minimizes clean up. 24T carbide blade enhances cut quality and prolongs blade life. Table coating reduces friction for smoother cutting. Includes: Miter gauge, push stick, 10" carbide blade and blade guard. (DW7450 Stand sold separately Orgill sku 573.9974)
Rockwell Portable Table Saw Trolley Stand SAW TABLE 60V W/BATT/CHARGER Dewalt DWE7490X Table Saw
Laser indicator for consistent accuracy. Cuts 4x4 in one pass. Base of the saw incorporates a sturdy fold-down trolley stand with wheels, onboard accessory storage and can be rolled from one jobsite to another by using the outstretched leg as a pull handle. The stand also features an adjustable leg extension for set-up on uneven surfaces. Specs: no-load speed of 5000 rpm, overall table dimensions are 28-1/2"x19" with a 30" rip capacity to the right and 11" on the left, depth of cut is 3-9/16" at 90 degrees and 2-9/16" at 45 degrees, dado width is 1/2" and  weighs 74 lbs. Includes: a rip fence, miter gauge, push stick, riving knife and sawdust collection bag. This table saw is maximized for accuracy, capacity and run-time. The brushless motor delivers the power to cut all materials. Rack and pinion telescoping fence rails make fence adjustments smooth and accurate and provides the capacity to rip 4 x 8 sheet goods. Runs off of 20V/60V Flexvolt battery system for maximum portability. Power-loss reset prevents accidental re-starts following a power disruption when the switch is left in the "on" position. On board storage for guard, fence, wrenches and miter gauge. 24" of rip capacity for ripping 4 x 8 plywood or OSB sheets. Site-Pro modular guarding system allows for tool free adjustment of the guarding. Metal roll cage base offer greater durability than plastic bases. Table coating reduces friction for smoother cutting. Depth of cut at 45 degrees 1-3/4". Max width to left of blade 12". Tool weight 48 lbs. Includes: (1) 60 volt Max Table Saw, (1) Non-Thru Cut Riving Knife, (1) 20 volt/60 volt Max Flexvolt battery, (1) push stick, (1) Fast charger, (1) blade guard, (2) blade wrenches, (1) rip fence and (1) miter gauge. Rack and pinion telescoping fence rail make fence adjustments fast, smooth and accurate. Material support can be sued for narrow rip cuts. 28-1/2" of rip capacity easily cuts a variety of larger shelving and trim material. On board storage provides easy access to the blade guard assembly, fence, riving knife, push stick, miter gage, wrenches and cord wrap when not in use. Compact folding stand. Blade guard assembly allows for tool free adjustments of the guard for different applications. Flip over fence, allows for narrow rip cuts. Telescoping fence rails retract to create a small portable package. Features a 15.0 amp high torque motor with the power to cut pressure-treated lumber and hardwoods. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides ideal material support. Includes: 10" 24-tooth carbide blade, folding table saw stand, miter gauge, push stick, folding stand, rip fence, 2x blade wrenches and blade guard assembly.
SAW MITRE DUAL BEVEL 12IN 120V Dewalt DW734 Portable Reversible Corded Planer Dewalt DW717 Double Bevel Sliding Compound Corded Miter Saw
The DHS716 12" (305mm) 120 volt Max Compound Miter Saw with top handle delivers power and cutting capacity with the portability and convenience of a cordless tool. Flexible power for corded or cordless use. CutLine Blade positioning system delivers adjustment free cutline indicator. Includes the 12" Compound Miter Saw, blade, blade changing wrench, dust bag and a  120 volt AC adapter (Batteries And Dual Port Fast Charger Sold Separately). 45 degree bevel cut capacity; 45 degree miter cut capacity; 90 degree cross-cut capacity. Arbor size: 5/8" (1") IN. Weighs only 44 lbs. 4-column carriage lock for reduced snipe. Extra-long in-feed and out-feed tables provide 33-1/2" of material support. 3-knife cutter- head provides 96 cuts per inch. Material removal gauge and thickness scale for accurate cuts. Turret depth stop allows easy return to most frequently used depths. STANDARD EQUIPMENT: Dust hood. SPECIFICATIONS:  15 amp, 120-Volt AC motor, 10,000 RPM, 1/8" max depth of cut, 6" depth capacity. Feeds 26' per minute. 80 lb. weight. Cross cut positive stop for optimal cutting position. XPS Laser Compatible. Tall sliding fence for optimized material support. Bevel detent system with 7 hard stops gives you accurate, repeatable cuts. Adjustable stainless steel miter plate. Cam lock miter system. Sliding fence that supports up to 6" base molding to the left of the blade & up to 3 1/2" to the right of the blade. Machined base fence insures blade perpendicularity to fence. SPECIFICATIONS: Blade Diameter: 10"; Bevel Capacity: 0 degrees - 48 degrees; Miter Capacity: 60 Degrees left, 51 degrees right; Crosscut Capacity at 0 degrees: 2" x 14"; Crosscut Capacity at 45 degrees: 2" x 12"; Vertical Capacity: 6" base molding, 6-1/4" crown molding; Amps: 15 amps; Net Weight: 51 lbs. Stand Not Included.
Hitachi C10FSBP4 Double Bevel Sliding Compound Corded Miter Saw Dewalt Corded Scroll Saw Hitachi C10FSHPS Double Bevel Sliding Compound Corded Miter Saw
Positive angle stoppers for easy adjustment of teeth, turn table position for miter cutting (at the right and left of the 0-degree center setting, at 15,22.5, 31.6 and 45-degree settings). High sub fence. Legibly labeled angle scale and bevel scale. High dust collecting performance. Splinter guard, also serving for cut alignment. Electronically controlled soft start and constant speed for smooth, accurate cutting, fine surface finish and low noise operation. Poly V-belt and motor driving system for longer service life. STANDARD EQUIPMENT: 1 each: Vise Assembly, dust bag, 10mm box wrench, 255mm (10") TCT saw blade. SPECIFICATIONS: 10" diameter, 120V, 12 Amp, 1,400W max. output, 3,800 RPM, soft start and speed control. Max cutting capacities: 0-degree (right angle), miter cut 45-degree (left/right), miter right 57-degree, bevel cut 45-degree (left), bevel cut 45-degree (right), miter left/right 45-degree plus bevel left 45-degree, miter right 45-degree plus bevel right 45-degree. Miter cutting range: 0-45 degree left, 0-57 degree right. Bevel cutting range: 0-45 right and left. 20-3/4W x 41-1/2"L x 24-1/4"H. 43 lbs. tool weight. Double parallel link arm design dramatically reduces vibration and noise, for extremely accurate cuts. Exclusive tool-free blade clamps, On-off switch, electronic variable speed, flexible dust blower and blade-tensioning lever are all located on the front upper arm. Arm design pivots from the back of the saw to the front and lifts so blade can be easily threaded through the material for inside cuts. Unique arm design keeps the blade perpendicular to the work. Oversized, cast-iron table provides excellent material support and bevels 45 degrees left and right. Specs: Motor 1.3 amp rating, 120V AC. 400-1,750 cutting strokes per minute. Table size 16" x 23-3/4". Weighs 56 lbs. Meets OSHA standards, CSA approved and U.L. Listed. Stand Not Included. 12 AMP belt driven motor with soft start and overload protection. Adjustable laser guide for precise cutting. Soft Start feature reduces noise and recoil during start-up. Electronic speed control keeps RPMs constant as load varies. Linear ball bearing slide system for precision and durability. Left and right positive stops on miter gauge located at 0, 15, 22.5, 31.6, and 45 degrees. Dust collection system collects 100% more dust than previous models. STANDARD EQUIPMENT: saw, 10" TCT saw blade, dust bag, 10 mm box wrench, and vice assembly. SPECIFICATIONS: 12 AMP belt driven motor, pivoting fence, no-load speed of 3,800 RPM.
Bosch Table Saw Stand Dewalt DW735 2-Speed Portable Corded Planer MITER SAW KIT 10IN M18 9.0BATT
The Smart Guard System is the first ever quick and easy-to-use modular blade guard, anti-kickback pawls and riving knife system; provides superior control over the material and maximum visibility while cutting. Engineered for maximum trueness, the 'Squarelock' Rip Fence glides along the rail at a finger's touch or locks into place for solid and consistent cutting performance. Easy set up and take down of your table saw; heavy-duty construction and 8" pneumatic wheels allow the Gravity-Rise stand to handle the toughest jobsites. Integrated Sub-base increases tool life by handling jobsite abuse, while protecting the table saw's base. Built-in sub-base and tabletop carry handles add to the saw's portability from jobsite to jobsite. On tool storage for all saw attachments and tools. Soft Start and 'Constant Response' Circuitry for quiet and smoother start-up, reduced start-up torque and maintaining speed under load. Exclusive Arbor Lock for single wrench blade changes. INCLUDES: 10" Worksite Table Saw; 10" 40-Tooth Carbide Tip Saw Blade; Blade Wrench; Hex Key; Sliding Miter Gauge; 'Gravity-Rise'Table Saw Stand with Pneumatic Wheels; Smart Guard System. Automatic carriage lock for reduction of movement that causes snipe without need for manual engagement by user. 2-speed gear box allows user to change feed speed to optimize cuts per inch at 96 or 79 CPI. Fan assisted chip ejection vacuums chips off the cutter-head and exhausts them out of the machine. Material removal gauge and extra-large thickness scale for accurate cuts. Extra-large turret depth stop. STANDARD EQUIPMENT: Dust hose adapter, dust ejection chute. SPECIFICATIONS:  15- amp, 120-Volt AC motor, 10,000 RPM, 1/8" Max depth of cut 1/8", 6" depth/13" width capacity 6". Width capacity 13". Feeds 14' or 26' feet per minute. Milwaukee Powerstate brushless motor provides more corded cutting performance, power, more  run-time and longer life. Dual Bevel with 9 detents and easy access bevel lever. Top and side carrying handles for maximum portability. Detent override for easily setting miter locations outside of detents. The RedLink Plus Electronic Intelligence enables advanced communication between your batteries and tools, allowing for unmatched levels of performance, protection and productivity. Easy access to change blade. Durable RedLithium battery pack delivers more run-time, power and longer battery life with up to 400 cuts per charge. Maximum miter capacity 50/60. Includes: M18 Fuel Dual Bevel Sliding Compound Miter saw, (1) M18 RedLithium High Demand 9.0 battery pack, (1) M18 and M12 Rapid charger, (1) Blade Wrench, (1) Carbide Tipped Blade, (1) Clamp and (1) Dust bag.
Dewalt DWS780 Double Bevel Sliding Compound Corded Miter Saw Dewalt DWE7491RS Table Saw SAW MITER COMPOUND 12IN BRSHLS
Adjustable stainless steel miter detent plate with 10-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 6-5/8" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. Single lever action double bevel design allows saw to easily bevel left and right 0-48 degree with positive stops at 0, 22.5, 33.9 and 45 degree in both directions permitting user to flip the saw and not the material. Back fence design delivers ability to cut 2 x 16" dimensional lumber at 90 degrees and 2 x 12" at 45 degrees. Precise miter system and machined base fence support deliver increased cutting accuracy. Innovative gearbox and belt-drive design for increased vertical cutting capacity. Miters 60 degrees to the left and 50 degrees to the right. Dual horizontal steel rails with clamping mechanism and linear ball bearings. Camlock miter handle with detent override. Compact and lightweight design for quick, easy transport and storage. For use with No.DW7187 Adjustable Miter Saw Laser System which delivers visibility of the cutting path.  STANDARD EQUIPMENT: carbide blade, dust bag, blade wrench. SPECIFICATIONS: 15 amps, 3,800 RPM no load speed, 12" blade diameter, 5/8 or 1" arbor size, 6-1/2" vertical capacity baseboard against fence, 6-5/8" vertical capacity crown molding vertically nested, 16" horizontal capacity baseboard lying flat, 11-1/4" horizontal capacity crown molding lying flat,  2 x 14" (2 x 16" with back fence) 45-degree bevel cut capacity (dimensional lumber),  2 x 14" (2 x 16" with back fence) for 90-degree cross-cut capacity (dimensional lumber),  16" for 90-degree cross-cut capacity (max width), 2 x 12" max width for 45-degree miter-cut capacity (max height), 2 x 12" for 45-degree miter-cut capacity (max width). 53 lbs. tool weight. Stand Not Included. Jobsite table saw with rolling stand. Rack and pinion telescoping fence system make fence adjustments fast, smooth and accurate. Material support can be used for narrow rip cuts. 32-1/2" rip capacity easily cuts a variety of larger shelving and trim materials. On board storage system provides easy access to the blade guard assembly, fence, riving knife, miter gage, wrenches, push stick and cord wrap when not in use. Rolling stand designed for easy set up and breakdown with ideal stability. Telescoping fence rails retract to create a small portable package. Flip over ripping fence allows for narrow rip cuts. 15 amp motor quickly rips through hardwoods with ease. 2-1/2" dust collection port easily connects to a vacuum for efficient dust extraction. 3-1/8" depth of cut at 90 and 2-1/4" at 45. No load speed 4800 rpm. 21-7/8" x 26-3/8" table provides superior material support. Includes: 10" 24-tooth carbide blade, rolling stand, push stick, miter gauge, rip fence, 2x blade wrenches and blade guard assembly. The 12" (305mm) 120V max compound miter saw delivers the power and cutting capacity that end users have come to expect from Dewalt corded miter saws with the portability and convenience of a cordless. Run time up to 289 cross cuts in baseboard along with the best in class vertical capacity against sliding fence. Tool height 26"; Tool length 32"; Tool weight 44 lbs. No load speed 3,800 rpm. Kit includes: (1) 12" (305mm) Compound miter saw, (1) Dual port fast charger, (1) blade, (1) 120V AC adapter, (2) 60V Max Lithium Ion batteries, (1) blade change wrench and (1) dust bag.
SAW MITER SLIDING 12IN 120V Milwaukee 6955-20 Double Bevel Sliding Compound Corded Miter Saw SAW SLIDNG MITER 12IN BRSHLS
120 volt Max Double Bevel Sliding Compound Miter Saw with CutLine delivers capacity, accuracy, power, ease of use and the durability of a corded tool with the portability and convenience of a cordless tool. CutLine blade positioning system delivers accurate line of sight to be cut. Includes the 120 volt AC adaptor. (60 Volt Max Lithium Ion Batteries And Fast Charger Sold Separately). The Miter Angle Digital Readout provides repeatable accuracy to 0.1 degree. Miter Angle Fine Adjust with Detent Override makes it simple to dial in precise miter angles. Dual Integral Jobsite Lights fully illuminate the work piece and cut line from either side of the blade. The powerful 15.0 Amp, 3.3 Max HP Direct Drive Motor provides increased power for high performance cutting in hard lumber. Constant Power Technology with Soft Start maintains constant cutting speed under load and decreases start up head movement. The Integral Dust channel captures up to 75 percent of the dust and debris cut. SPECIFICATIONS: Amps:  15.0; No Load Speed:  3,200 RPM; Blade Diameter:  12"; Arbor Size:  5/8" or 1"; Miter Range:  55 degrees  Left to 60 degrees  Right; Bevel Range:  48 degrees  Left to 48 degrees  Right; Miter Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 55 degrees; Right-0 degrees, 15 degrees, 22.5 degrees, 31.6 degrees, 45 degrees, 60 degrees; Bevel Stops:  Left-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees  Right-0 degrees, 15 degrees, 22.5 degrees, 33.85 degrees, 45 degrees, 48 degrees. Tool Weight  65 lbs. INCLUDES: Carbide Tipped Blade; Dust Bag; Blade Wrench. This double bevel sliding compound miter saw offers flexible power options; corded for unlimited run time or cordless for portability powered by Dewalt brushless motor technology. Accuracy is delivered through adjustable miter scale with 11 positive stops and visibility bevel scale the CutLine blade positioning system. Up to 289 cross cuts in 3-1/4" base molding. Compact design weighs only 56 lbs. Includes: (1) DHS 790 Miter saw, (1) Dual port fast charger, (2) 60 volt Max Lithium Ion batteries, (1) blade wrench, (1) 12" blade, (1) DCA 120 volt Max corded power supply and (1) dust bag.
   
 
1