Home > GENERAL AUTOMOTIVE > FUEL CANS & SUPPLIES
Sort By:
1
Victor 22-5-00782-8 Siphon Manual Transfer Pump Hopkins 50863 Water Can CAN GAS NO SPILL 1.25 GAL
Transfers fluid for everyday projects or in emergency situations. 5-foot PVC hose. Made of durable, rust- and dent-proof, high-density polyethylene with convenient back and top handles for easier pouring. Self-venting spout. Dimensions: 14.25" x 8.50" x 18.5". Push button control, simply press the button to pour. Auto stop, nozzle automatically stops the fuel flow when the target tank is full. Fast flow rate, no gurgling or interrupted flow. Large neck opening, wide, stable design. Three handles on each can. Finger handles on each nozzle, and a finger slot on the bottom of each can (rear handle on the 5 gallon). The top handle is for carrying. Professional quality, thick skin, up to 70 percent thicker than other brands.
CAN GAS NO SPILL 2.5 GAL      Scepter 5086 Jerry Gas Can Scepter 5088 Gas Can
Push button control, simply press the button to pour. Auto stop, nozzle automatically stops the fuel flow when the target tank is full. Fast flow rate, no gurgling or interrupted flow. Large neck opening, wide, stable design. Three handles on each can. Finger handles on each nozzle, and a finger slot on the bottom of each can (rear handle on the 5 gallon). The top handle is for carrying. Professional quality, thick skin, up to 70 percent thicker than other brands. Advanced spout design combined with child-resistant features and emission reducing technology. Features variable flow, automatic venting, automatic locking when lever is released, and an airtight seal when not in use to reduce spills. Meets (CARB) and EPA requirements for portable fuel containers. Plastic, lightweight, dent resistant, rust proof, non-corroding. 1.6 gallon gasoline, .6 gallon oil. Child resistant spout with automatic shut-off and overflow protection. Spouts fit inside the can openings until needed. CARB & EPA Compliant.
CAN GAS NO SPILL 5 GAL        DIESEL GAS CAN 5 GAL YELLOW   Lubrimatic 55-017 Barrel Hand Pump
Push button control, simply press the button to pour. Auto stop, nozzle automatically stops the fuel flow when the target tank is full. Fast flow rate, no gurgling or interrupted flow. Large neck opening, wide, stable design. Three handles on each can. Finger handles on each nozzle, and a finger slot on the bottom of each can (rear handle on the 5 gallon). The top handle is for carrying. Professional quality, thick skin, up to 70 percent thicker than other brands. Push button control, simply press the button to pour. Auto stop, nozzle automatically stops the fuel flow when the target tank is full. Fast flow rate, no gurgling or interrupted flow. Large neck opening, wide, stable design. Three handles, finger handles on each nozzle, rear handle on the 5 gallon, top handle for carrying. Professional quality, thick skin, up to 70 percent thicker than other brands. Fits 30 or 55 gallon drums. Delivers 1-1/2 pints per 36" lift stroke. Rod style with steel piston and valves, no rubber packing or sleeves. Die-cast head with garden hose threads and 18-gauge steel cylinder. Includes curved metal spout and adapter. Pump outlet is threaded for 3/4" garden hose coupling. 2" bung nut included.
Fill-Rite FRHMN075S Manual Unleaded Fuel Nozzle Fill-Rite FRHMN100S Manual Fuel Nozzle Fill-Rite 1200KTG9075 Pump Filter Head Kit
Compatible with gasoline and diesel. 3/4" manual nozzle for use with electric fuel pumps. UL/cUL Listed. For a broad range of high flow fueling applications from farm tractors and combines, heavy earth-moving equipment, fleet re-fueling, to above ground storage tanks and portable truck mounted fueling operations. 1" aluminum nozzle, 1" NPT outlet, manual nozzle. 50 PSI working pressure. Integral hanging hook compatible with all Fill-Rite products. Minimal spray pattern to reduce foaming. Viton seals and o-rings for smooth valve operation. Rated to -20 degrees F operation. Compatible with gasoline and diesel.  UL/cUL listed. Made in USA. Cast iron 3/4" filter head for F1818PM0 and F1810HM0 filters.
CAN GAS PORTABLE 2.2 GALLON   Justrite 7120100 Type I Safety Can Plews 30-108 Manual Transfer Pump with Viton O Rings
Flexible 180 degree rotating pouring spout and thumb control button allows access to even the most awkward fill locations. Self venting, thumb trigger. Child proof cap. Tether for nozzle cap. Heavy-duty, high grade coated steel construction with reinforcing ribs to strengthen sidewalls to resist chemicals and stand up to heavy abuse. Single spout for filling and pouring. Self-closing, leak-proof lid, and a swinging handle for carrying heavier loads. Counterbalanced ergonomic design with full-fisted grip handle offers gravity-assisted pouring. All models are equipped with an FM-tested dual-density flame arrester, which dissipates heat to stop flashback ignition. Positive pressure relief mechanism automatically vents between 3 and 5 psig. Meets OSHA and NFPA requirements, is certified by FM, UL, ULC. Carb compliant, and TUV certified. Uses funnel 11202Y, Orgill sku 396.0424 for type 1 cans. For transferring from one container to another, or draining oils and other fluids. Hand-operated, self-priming. For farm, home, automotive, and factory use. Heavy-duty steel construction with durable Viton o-rings. 8' vinyl hose (0.50"ID x 0.63"OD) to handle up to 90-wt. fluids. Features a double check valve. 1-gallon/8 strokes.
Justrite 7110100 Type I Safety Can Justrite 7150100 Type I Safety Can Lubrimatic 55-123 Barrel Standard Lever Manual Transfer Pump
Made of galvanized steel with a tough powder paint finish, has ample headspace to accommodate oil additives. Protection features include a 3-1/2" long chemical resistant stainless steel flame arrester that stops flashback ignition, provides faster liquid flow, and offers exceptional durability. Self-venting, self-closing leakproof lid prevents ruptures from pressure build-up and controls vapors and spills. Warning label includes an extra large ID zone for user labeling of contents, or may be used to designate department or individual owner. 100 percent leak tested. Meets OSHA and NFPA. FM approved, UL/ULC listed, Carb compliant, T?V certified.  9-1/2" x 11". Uses funnel 11202Y, Orgill sku 3960424 for type 1 cans. Heavy-duty, high grade coated steel construction with reinforcing ribs to strengthen sidewalls to resist chemicals and stand up to heavy abuse. Single spout for filling and pouring. Self-closing, leak-proof lid, and a swinging handle for carrying heavier loads. Counterbalanced ergonomic design with full-fisted grip handle offers gravity-assisted pouring. All models are equipped with an FM-tested dual-density flame arrester, which dissipates heat to stop flashback ignition. Positive pressure relief mechanism automatically vents between 3 and 5 psig. Meets OSHA and NFPA requirements, is certified by FM, UL, ULC. Carb compliant, and TUV certified. Uses funnel 11202Y, Orgill sku 396.0424 for type 1 cans. Two-piece telescoping suction tube fits 30 to 55 gallon drums for a wide variety of liquids. Easy-to-operate suction lift dispenses approximately 10 ounces per stroke. Complete with standard bung adapter, tough all-steel foot valve and piston valve. Standard garden hose thread discharge spout.
Fill-Rite SD11 Barrel Piston Hand Transfer Pump Fill-Rite FRTCB Vented Fuel Tank Cap with Base Lubrimatic 55-303 Standard 2-Vane Barrel Hand Pump
Drum or barrel mounted lever action die cast and steel piston pump, up to 11 oz. per stroke. Adjustable packing nut. Nitrile rubber seals. Fits 1-1/2" and 2" bung openings. 1" diameter steel telescoping suction tube. Garden hose threads on spout for greater flexibility. Pumps diesel fuel, hydraulic and transmission fluids, and motor oils up to 40 weight. Steel telescoping suction tube to accommodate different drum and barrel heights Vented fill cap with a 2" base for tanks with a 2" opening. For transferring non-corrosive petroleum-based fluids of light to medium viscosity in industrial, commercial, automotive, and agricultural applications. Single direction, 2-vane pump with rugged cast-iron housing and 42" steel suction pipe. Designed to transfer liquids at a rate of 1 gal./18 revolutions with SAE 10 oil. Includes 2" bung nut and 3/4" pump outlet with removable steel spout.
CAN GAS PORTABLE 5 GALLON     CAN KEROSENE FUEL PORTABL 5GAL Justrite 7150200 Type I Safety Can
CAN GAS PORTABLE 5 GALLON
Our Price : $52.99
Flexible 180 degree rotating pouring spout and thumb control button allows access to even the most awkward fill locations. Self venting, thumb trigger. Child proof cap. Tether for nozzle cap. Hand grips at the bottom help support the weight. The flexible 180 degree rotating pouring spout and thumb control button allows access to even the most awkward fill locations. Self venting, thumb trigger. Child proof cap. Tether for nozzle cap. 15.61"h x 10.24"w x 15.27"d. Yellow cans can be used to designate the storage of diesel fuel. Heavy-duty, high grade coated steel construction with reinforcing ribs to strengthen sidewalls to resist chemicals and stand up to heavy abuse. Single spout for filling and pouring. Self-closing, leak-proof lid, and a swinging handle for carrying heavier loads. Counterbalanced ergonomic design with full-fisted grip handle offers gravity-assisted pouring. All models are equipped with an FM-tested dual-density flame arrester, which dissipates heat to stop flashback ignition. Positive pressure relief mechanism automatically vents between 3 and 5 psig. Meets OSHA and NFPA requirements, is certified by FM, UL, ULC. Carb compliant, and TUV certified.
Justrite 7150110 Type I Safety Can with Funnel CAN DIESEL FUEL PORTABLE 5GAL Fill-Rite SD62 Rotary Hand Transfer Pump
Heavy-duty, high grade coated steel construction with reinforcing ribs to strengthen sidewalls to resist chemicals and stand up to heavy abuse. Single spout for filling and pouring. Features self-closing, leak-proof lid, No.11202Y (SKU 396.0424)  poly funnel, and a swinging handle for carrying heavier loads. Counterbalanced ergonomic design with full-fisted grip handle offers gravity-assisted pouring. All models are equipped with an FM-tested dual-density flame arrester, which dissipates heat to stop flashback ignition. Positive pressure relief mechanism automatically vents between 3 and 5 psig. Meets OSHA and NFPA requirements, is certified by FM, UL, ULC. Carb compliant, and TUV certified. Hand grips at the bottom help support the weight. The flexible 180 degree rotating pouring spout and thumb control button allows access to even the most awkward fill locations. Self venting, thumb trigger. Child proof cap. Tether for nozzle cap. 15.61"h x 10.24"w x 15.27"d. Designed to use with barrels or tanks for all types of petroleum products; SAE30 motor oil max viscosity. Fluid transfer made smooth and easy. Siphon effect achieved by attaching hose to outlet spout. Cast iron construction. Included suction pipe adjusts for 15 to 55 gallons drums. -15 to 150 degrees Fahrenheit min to max ambient operating temp. 7.5 gallons of fluid per 100 revolutions. 1" NPT inlet, 2" NPT bung adapter and suction tube. 1"OD gooseneck discharge spout.
Fill-Rite N075DAU10 Leaded Fuel Nozzle Accuflow 7250120 Type II Safety Can Fill-Rite N075UAU10 Unleaded Fuel Nozzle
Automatic nozzle with a 3/4" unleaded or 1" leaded spout. For use with FR1200, FR700 and FR600 series pumps. 50 PSI working pressure. Integral hanging hook compatible with all Fill-Rite products. Minimal spray pattern to reduce foaming. Viton seals and O-rings for smooth valve operation. Rated to -20 degrees F. Compatible with gasoline, diesel, kerosene, mineral spirits and many other fuels. cUL Listed. Heavy-duty, coated steel with reinforcing ribs and tough powder paint finish for durability. There are two openings at the top, one with a flexible metal hose for smooth, accurate pouring into small apertures. The hose also provides a bonding path to a receiving vessel. A second opening behind the handle is used for filling. A swinging handle helps to carry a full, heavy can. During pouring the weight of the liquid counterbalances the pressure required to open the spout. Both openings are equipped with dual-density flame arresters which dissipate heat to prevent flashback ignition. Both openings self-close to prevent spillage and the rear opening automatically vents between 3 and 5 psig to guard against pressure build-up at elevated temperatures and potential explosion. Meet OSHA and NFPA, are FM Approved and UL/ULC Listed. Carb compliant and TUV certified. Automatic nozzle with a 3/4" unleaded or 1" leaded spout. For use with FR1200, FR700 and FR600 series pumps. 50 PSI working pressure. Integral hanging hook compatible with all Fill-Rite products. Minimal spray pattern to reduce foaming. Viton seals and O-rings for smooth valve operation. Rated to -20 degrees F. Compatible with gasoline, diesel, kerosene, mineral spirits and many other fuels. cUL Listed.
Fill-Rite N100DAU13 Fuel Nozzle Fill-Rite FR112 Barrel Rotary Hand Transfer Pump Fill-Rite FR152 Barrel Piston Hand Transfer Pump
Capable of flowing at 40 gallons per minute. For transfer of gasoline, diesel, or kerosene to large fuel capacity farm, fleet, or construction equipment. 1" NPT inlet, 1-1/8" OD spout. One-finger hold-open three-position latch for automatic flow at 30, 24 and 8 GPM. Angled outlet to minimize hose wear. 50 PSI working pressure. Heavy duty hanging hook compatible with all Fill-Rite products. Automatic shut-off. Rated to -20 degrees Fahrenheit operation. Insulated hand grip to minimize hot and cold handling. Minimal spray pattern to reduce foaming and false shut offs. Large spout spring to hold nozzle in place. Vitron seals and o-rings for smooth valve operation. UL/cUL listed for gasoline, diesel and kerosene. Made in USA. Rotary hand pump is effective with medium viscosity liquids, as well as oils, gasoline and diesel fuels. Rotary action allows smooth, continuous transfer at up to 10.3 ounces (0.306 Liters) per revolution, 10 GPM (38 LPM) per 100 revolutions. Lightweight cast aluminum body with built-in check valve and strainer. 2" tank adapter. Corrosion-proof adjustable suction pipe. Anti-siphoning device. Maximum dry vacuum of 6" of mercury. Minimum lift is 8' of diesel. Pump may be padlocked. UL Listed. Heavy-duty UL Listed pump designed for all types of petroleum products. Vacuum breaker, bung adapter designed to fit standard 2" NPT bung on most barrels and tanks, 1" inlet and 3/4" outlet, 8' long hose and nozzle, and telescoping suction pipe. Works with No.807CMK (SKU 663.6831) meter kit sold separately. Built-in strainer and anti-siphon valve. Lightweight cast aluminum. Easily accessible for cleaning. Security handle equipped with bracket for padlocking. 20 gallons per 100 strokes. Diesel fuel max recommended viscosity of pumped fluid. -15 to 150 degrees ambient operating temp. 10" of mercury dry vac, 11' diesel min suction lift.
Tuthill FR1614 Portable Diesel Fuel Transfer Pump Fill-Rite 807CMK Mechanical Flow Meter Kit Fill-Rite 901 Mechanical Flow Meter
Extremely portable. For use with diesel, BioDiesel to B20 and antifreeze. Not for use with gasoline. For drums and totes. Up to 10/38 GPM/LPM flow rate. 3/4" inlet/outlet. Cast iron body. Bypass valve and lip seal for leak protection. 1/5 horse power. 6-1/2' power cord with battery clamps. 20 amps. 30 minute duty cycle. Includes 8' PVC suction hose with strainer, 8' PVC discharge hose and 3/4" manual polypropylene nozzle with swivel. Flow rate of 5 to 20 GPM. Accurate to within +/- 1-percent. 3/4" NPT female inlet and outlet flow ports. 50 PSI max pressure. Meters fluid at temperatures - 15 to 150 degrees Fahrenheit. Diesel fuel max viscocity, compatible with diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. Weatherproof, corrosion resistant. Register indicates up to 99.9 gallons. Zero reset unit wheels have large 11/16" figures. Large, easy to read numbers. Totalizer registers to 99,999.9 gallons. Compact design, 8" x 6" x 6". Convenient, large, quick reset knob with positive zero stop. Furnished for horizontal piping, left to right flow. Not for resale dispensing. cUL/UL Listed. Kit includes meter with fittings. Mount meter on 1200, 2400, 600, SD1200, SD600 and 700V series pumps. Flow rate of 6 to 40 GPM. Accurate to within +/- 2-percent. 1" inlet and outlet flow ports positioned vertically or horizontally. 50 PSI max pressure. Rated for gasoline, diesel, kerosene, mineral spirits, solvents and heptane.  Weatherproof, corrosion resistant. Aluminum housing, Viton and Buna seals. UL/cUL, CE, Ex.
Tuthill FR1204G/FR1204 Fuel Transfer Pump Tuthill SD1202G/SD1202 Fuel Transfer Pump Tuthill SD600 Fuel Transfer Pump
Pump only. Weighs less than 27 pounds. Draw is easy on the DC power source. Compatible with petroleum  products of all types including diesel, gasoline, kerosene and Biodiesel to B20. 2" threaded base for tank openings. Integral check and automatic bypass valves. Built-in strainer (inlet screen). No foot valve or lubrication required. Offers corrosion-proof adjustable section pipe, iron rotor, machined carbon vanes, heavy-duty switch, thermal overload protector and junction box. Pump security equipped for padlocking. Heavy-duty 12 volt DC pump with nozzle boot that protects against dirt and contamination. Pump only, accessories sold separately. 2" male NPT on bung adapter/1" female NPT on suction port inlets; 3/4" female NPT outlet. Explosion-proof 1/4-HP 12 volt DC/20 amp, 2600 RPM motor with permanent magnet and sealed ball bearings. 30 minute duty cycle, not for continuous operation. Delivers up to 15 GPM. 12-1/4" width x 9" height x 9" depth. cUL/UL Listed pump and motor, and bears CE marking. The ruggedness of cast iron and portability of DC power. Delivers up to 13 GPM. Designed for tank or barrel mounting. Thermally protected, cUL/UL listed, explosion-proof, 1/4 HP motor. 2" NPT, no tank adapter needed. 3/4" x 10' long hose, manual nozzle and 15' power cable. 1" polymer adjustable suction pipe. Positive displacement, rotary vane configuration. Ball bearing construction, no lubrication required. 30 minute duty cycle. Pump security equipped for padlocking. Compatible with diesel fuel, gasoline and kerosene. 12 volt DC. The ruggedness of cast iron and convenience of AC power. Delivers up to 13 GPM. Designed for tank or barrel mounting. Thermally protected, cUL/UL listed, explosion-proof, 1/4 HP motor. 2" NPT, no tank adapter needed. 3/4" x 12' long hose, manual nozzle, and 1" adjustable polymer suction pipe. Positive displacement, rotary vane configuration. Ball bearing construction, no lubrication required. 30-minute duty cycle. Pump security equipped for padlocking. Compatible with diesel fuel, gasoline and kerosene. 115 volt AC.
Tuthill FR1210G/FR1210C Fuel Transfer Pump Tuthill FR4210G/FR4210D Fuel Transfer Pump Tuthill 700 AC Fuel Transfer Pump
Weighs less than 27 pounds, with hose and nozzle. Draw is easy on the DC power source. Compatible with petro products of all types including diesel, gasoline, kerosene and Biodiesel to B20. 2" threaded base for tank openings. Integral check and automatic bypass valves, and built-in strainer (inlet screen). No foot valve or lubrication required. Offers corrosion-proof adjustable suction pipe, iron rotor, machined carbon vanes, heavy-duty switch, thermal overload protector and junction box. Pump security equipped for padlocking. Heavy-duty 12 volt DC pump, 15' long heavy-duty 3 wire battery cable, manual nozzle with nozzle boot that protects against dirt and contamination, telescoping suction pipe, and UL Listed 3/4" x 12' long hose with static ground wire. 2" male NPT on bung adapter/1" female NPT on suction port inlets; 3/4" female NPT outlet. Explosion-proof 1/4 HP 12 volt DC/20 amp, 2600 RPM motor with permanent magnet and sealed ball bearings. 30 minute duty cycle, not for continuous operation. Delivers up to 15 GPM. 12-1/4" width x 9" height x 9" depth. CSA approved, cUL/UL Listed pump and motor, and bears CE marking. DC motor with a flow rate of 20 GPM and 22 amp draw. Built-in check valve and bypass valve. 1" diameter outlet, 12' hose and 1" manual nozzle. Corrosion-proof adjustable suction pipe. Explosion-proof permanent magnet motor. Thermal overload protection. 30 minute duty cycle/not for continuous operation. Ball bearing construction, no lubrication required. Machined carbon vanes. 2" threaded base for tank openings. Rain proof. Pump may be padlocked. 1/4 HP, UL/cUL listed, 12 volt. Rugged positive displacement direct drive pump, compatible with diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. Diesel fuel max recommended pumped fluid viscosity. Offers heavy-duty switch and built-in check, bypass, and pressure-relief valves. Ball bearing construction; no greasing or oiling required. Thermal overload protector. Pump security-equipped for padlocking. Furnished with tank adapter for skid tank mounting, pedestals for island installations sold separately. Able to direct mount to above ground tank. Complete with UL Listed 3/4" x 12' long hose and manual nozzle. 150 to -15 degrees Fahrenheit max to min ambient operating temp. 12" of mercury min dry vac, 10' min gas/15' min diesel suction lift. 1-1/4" female NPT on suction pipe/2" male NPT on bung inlet, 3/4" NPT outlet. Full 1/3-HP 115-volt AC/60Hz explosion-proof motor. 5.5-amp, 1725 RPM. Delivers up to 20 GPM. 14" width x 11" height x 12" depth. CSA and cUL/UL Listed.
Tuthill 700 AC Fuel Transfer Pump
Rugged, positive displacement, direct drive pump compatible with diesel, gasoline, kerosene, mineral spirits, heptane, and hexane. Diesel fuel maximum recommended pumped fluid viscosity. Offers heavy-duty switch and built-in check and bypass valves. Ball bearing construction; no greasing or oiling required. Thermal overload protector. Pump security-equipped for padlocking. Furnished with tank adapter for skid tank mounting, pedestals for island installations sold separately. Able to direct mount to above ground tank. Complete with UL Listed 3/4" x 12' long hose, manual nozzle, and 807C flow meter installed. 150 to -15 degrees Fahrenheit max to min ambient operating temp. 12" of mercury min dry vac, 10' min gas/15' min diesel suction lift. 1-1/4" female NPT on suction pipe/2" male NPT on bung inlet, 3/4" NPT outlet. Full 1/3 HP 115 volt AC/60Hz explosion-proof motor. 5.5 amp, 1725 RPM. Delivers up to 15 GPM. 14" width x 11" height x 14" depth. CSA and cUL/UL Listed.
   
 
1