Home > AUTOMOTIVE > GENERAL AUTOMOTIVE > LUBRICANTS & FLUIDS
Sort By:
1 2 3
STP 00203 Brake Fluid STP 78572 All Season Water Remover STP 78571 Fuel Injector and Carburetor Treatment
Formulated for optimum performance for all disc or drum brake systems requiring DOT 3 fluids. Provides protection against brake failure from vapor lock, helps prevent corrosion. Complies with Federal Motor Vehicle Safety Standard No. 116. Meets SAE spec. J1703. Provide year-round corrosion and rust prevention. Removes water without alcohol and helps keep fuel injectors clean. Use with every fill up especially during winter and in warm, wet weather. Treats up to 79 litres. Helps save gas and improves performance by keeping fuel injectors and carburetors clean of harmful deposits. Helps prevent power loss, reduce engine friction and maintain optimum engine efficiency. Use regularly with fill up. Treats up to 79 litres.
Honeywell AS-400P Brake Fluid Solder Seal Gunk M516 Anti-Freeze Windshield Washer Fluid Hopkins 5034 Super Funnel
High boiling point gives an extra margin of safety and is designed for safe operation of high-powered vehicles. For ABS, disc, and drum brake systems. DOT 3, meets or exceeds Federal Motor Vehicle Safety Standard 116 and SAE Spec. J1703. 284 degrees Fahrenheit min wet boiling point. Concentrated formula designed to protect windshield washer systems from damage caused by temperatures as low as 25 degrees Fahrenheit. Superior for all season use when diluted as directed. See bottle for minimum delution requirements in California, Texas and Georgia. Makes 8 gallons. May be used with multiple substances such as oil, radiator fluid or fuel additives. 1-piece tapered, tough, high-density polyethylene for hard-to-reach spots.
Heel 28201 Gas Line Anti-Freeze STP 78573 Gas Treatment Bell V500 Lock Lubricant Thaw De-Icer
Additives and methanol formula safe for use in all 4-cycle engines. Prevents gas-line freeze-up, rust and corrosion year round. Removes water from fuel system, absorbs moisture in carburetor. Improves engine performance for year-round quick starts. Safe on catalytic converters and fuel injectors. 1 bottle treats up to 10 gallons. Improves the quality of gas and keeps fuel injectors and intake valves clean. Helps fight the accumulation of harmful carbon, gum and varnish deposits in the fuel system and remove water. Made with jet fuel, a high-quality carrier of active ingredients. Treats up to 21 gallons of gasoline. Use with every tankfull. Thaws frozen locks of auto doors and trucks, as well as any outdoor and household lock, then prevents locks from refreezing and rusting. Aerosol, carded.
Coastal 701169/21143 Iso Dry Gasoline Anti-Freeze STP 66079/ST-1014 Performance Oil Treatment Permatex 80345 Grease
Allows for quicker starts, helps prevent frozen gas lines and absorbs water. Can be used year round in 4-cycle gasoline engines. It will not harm catalytic converters, oxygen sensors or fuel injectors. Provides a thick cushion between moving engine parts to fight friction and protect against engine wear. Use every oil change. Treats 4-5 litres of oil. Fine quality for home, auto, and shop applications. Use on all metal parts. Clean and easy to use for thorough lubrication and long-lasting protection. Stops rust and corrosion, prevents wear. For tools, latches, hinges, reels, gears, wheels, etc. Long, tapered nozzle on tube permits pinpoint accuracy in applying grease. On a card.
Liquid Wrench Super Oil L1004 Household Lubricant Solder Seal Gunk M2713 Power Steering Fluid with Stop Leak Lubrimatic 05-028 Standard Jaw Hydraulic Grease Gun Coupler
A light grade non-detergent machine oil that lubricates and protects metal parts against wear, tarnish, rust and corrosion, the premium household oil, convenient dropper bottle. Stops leaks, revitalizes old seals, prevents wear, foam and oxidation. In a plastic bottle. For hand-operated lube equipment only. 4,500 PSI recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8" NPT threads.
Scepter 3603 Flexible Funnel 18 in H STP 78575 Super Fuel Injector Cleaner 3-in-One 10035 Oil
Flexible to bend and hold difficult pouring angles. Designed for fast pouring, with stabilizing handle. Made of tough, high-density polyethylene, will not rust, dent, or corrode. Unclogs dirty fuel injectors to restore performance and acceleration. Helps dissolve and remove harmful carbon, gum and varnish deposits on fuel injectors. Helps smooth rough idle and eliminate tough starts. Treats up to 21 gallons/79 litres of gasoline. Add to gas every 6,000km or every oil change. Blend of 3 oils that lubricate, clean, protect, and prevent rust. Use on locks, sliding doors, hinges, sewing machines, fans, window tracks, in saw blade cutting, on scissors, drawers, sports and recreation equipment and on the job for small motors.
Honeywell AS-262 Power Steering Fluid Blaster PB50 Lubricant STP 66046 Power Steering and Stop Leak
One treatment stops or reduces most fluid loss caused by leaky seals. Conditioners revitalize dried, shrunken, and hardened seals. Mixes with all approved power steering fluid and should be used for preventative maintenance. Meets requirements for GM, Ford, Chrysler, AMC, and most foreign cars. High-performance formula designed to lubricate moving parts in and around the house such as window tracks, hinges, valves, wheels, rollers, chains, glides and gears. Displaces moisture, prevents rust and further corrosion. Use on all moving parts. Light vanilla scent. Aerosol can. Formulated to stop or reduce fluid loss caused by seals which leak due to wear or shrinkage (not for use with broken or scored seals). One treatment helps stop most wear and shrinkage. Can be used instead of regular power steering fluid as preventive maintenance. Compatible with all approved power steering fluids. Helps protect against wear and pump breakdown.
Solder Seal Gunk DE1 Windshield De-Icer 3-in-One 10045 Motor Oil Hopkins 5068 Funnel Set
Defrosts car windows instantly. Helps free frozen locks. Spray in advance to help prevent frost formation. Special blend of high-grade oils equivalent to SAE-20. For electric motors of 1/4 HP or larger, and for outdoor use on guns, fishing tackle, lawn mowers, bicycles, farm, garden and workshop equipment. Non-sliding, will not run off, helps prevent rust and tarnish. Made of tough, high-density polyethylene for dispensing petroleum-based fluids. May be used with substances such as oil, radiator fluid or fuel additives. Includes one each: gray 1/2-pint, charcoal 1-pint, and black 2-quart.
Radiator Specialty M2312 Gas Treatment Gumout 800001370 Gas Treatment Tri-Flow 21010TF Penetrating Lubricant
Helps clean entire fuel system, reduces intake valve deposits, increases fuel economy, removes water, fight gas line freeze. 1 plastic bottle treats 1 tank, use in every tank for maintenance. Helps to prevent deposit build up, fight rust and corrosion and remove water to help reduce gas line freeze. Use with up to 21 gallons of gasoline every fill up. Penetrates quickly, displaces moisture, reduces friction and wear on moving parts, protects against rust and corrosion. Reduces buildup of dirt, dust, and abrasive particles. Loosens rusted parts, frees sticky mechanisms. Contains high-grade petroleum oils, micronized Teflon, and other ingredients to soften and remove dirt and corrosion, and keep equipment operating at its peak under heavy load, high wear, and severe temperature extremes. Use on bearings, rollers, drive chains, gears, locks, winches, shafts, sprocket housings, cables, tolls, conveyors, bolts, hinges, and cranks. Brown with a mild, fruity odor. Non-staining, safe on metal, wood, plastic, and rubber.  Squeeze bottle.
Rain-X 800002242/RX11112 Original Glass Treatment Gumout 800002231/7559 Carb and Choke Cleaner Lubrimatic 05-031 Standard Jaw Curved Grease Gun Coupler
Dramatically improves wet weather driving visibility, with and without wipers. Repels rain, sleet, and snow, frost, salt, mud, bugs and grime. Cleans the inside and outside of carburetor right down to the bright bare metal. Frees sticking automatic chokes, manifold heat controls, and cleans the PVC valve and all carburetor linkage. Removes gum, varnish and dirt instantly. Aerosol can. For hand-operated lube equipment only. 4,500 PSI recommended working pressure. Features spring-loaded ball check valve. Fits all 1/8" NPT threads.
Radiator Specialty M4912 Fuel Injector Cleaner Carb Medic M4816 Carburetor Cleaner Gumout 5072866 Instant Starting Fluid
Keeps fuel injectors and carburetors clean, restores lost power, reduces exhaust emissions. In a plastic bottle. Solvent thoroughly cleans metal parts, removes soil and grime, paint and varnish. E-Z pour plastic bottle. For gasoline engines. Perfect for extreme cold or humid weather.
Permatex 81150 Tune-Up Dielectric Grease FUNNEL ASSORTMENT BLK 3PK     Liquid Wrench L206 Lubricant
FUNNEL ASSORTMENT BLK 3PK
Our Price : $3.79
Protects electrical connections and wiring from salt, dirt and corrosion. Extends the life of bulb sockets. Prevents voltage leakage around any electrical connection. Also prevents spark plugs from fusing to boots. Required for modern high energy ignition systems. Suggested applications: marine and automotive electrical connections, spark plug boots, trailer hitches, battery terminals. Tough, high density black polypropylene, will not rust, dent or crack. Stabilizing handle allows smooth, steady pouring. Displaces moisture and protects all metal surfaces from rust and corrosion. Stops squeaks, loosens rusted parts. With precision spray straw. Aerosol can.
Lubrimatic 05-037 Gun Injector Needle Nozzle Liquid Wrench L104 Penetrating Oil 3-in-One 10038 Oil
Lubricates in very tight places like universal joints and sealed bearings. Stainless steel 18-gauge x 1-1/2" long needle. Equipped with standard grease fitting and protective plastic holder. For hand-operated grease guns only. Frees stuck nuts, bolts and locks, dissolves rust and cuts through grease, quickly penetrates corrosion, use on garden hose nozzles, clamps, pipes and frozen mechanisms. Contains no silicone. Blend of 3 oils that lubricate, clean, protect, and prevent rust. Use on locks, sliding doors, hinges, sewing machines, fans, window tracks, in saw blade cutting, on scissors, drawers, sports and recreation equipment and on the job for small motors.
Prestone AS-242 Windshield De-icer Blaster 16-SL Silicone Lubricant Permatex 85188 Ultra Disc Brake Caliper Lubricant
Prevents refreezing and smearing. A concentrated formula with a high powered propellant for windows, locks and wipers. Clear, non-evaporating formula eliminates wear from constant friction and is safe and non-staining. Protects from moisture and will not oxidize. Use on elastomers, metal, plastic, wood, rubber, vinyl and leather. Non-silicone, non-petroleum based, nonmelting, pure synthetic lubricant. It is formulated to lubricate caliper pins, sleeves, bushings and pistons throughout pad life. Compatible with internal and external brake rubber and plastic hardware, including ethylene-propylene rubber. Prevents disc brake squealing.
STP 78595 High Mileage Oil Treatment Solder Seal Gunk M3815 Standard Thrust Starting Fluid Gumout 800001363 Fuel Injector Cleaner
For use in vehicles with over 75,000 miles. High-viscosity formula is formulated to help fight metal-to-metal friction by providing a thicker cushion between moving engine parts. Helps to decrease metal-to-metal contact, reduce oil consumption, cushion noisy valves and lifters and stop minor oil leaks. Use with every oil change. To promote quick starting of gasoline and diesel engines under extreme cold conditions down to -65 degrees F. Saves battery and ignition during cold weather. Contains upper cylinder lubricant and corrosion inhibitors. Spray fluid directly into air cleaner of air intake before starting engine. Avoid spraying for over 5 seconds per attempt. If engine still refuses to start repeat procedure for up to 3 times. Aerosol can. Designed for high mileage vehicles. Helps clean fuel injectors, intake valves and prevent future deposit buildup. Use every 3,000 miles. Treats up to 21 gallons.
Rain-X Anti-Fog AF21106D/AF21112 Glass Treatment Blaster 16-PB Penetrating Catalyst Gunk Solder Seal Transeal M1512 Strong Transmission Sealer
Wipe-on formula for auto and home. Ends fogging, misting and steaming of interior glass, mirrors and plastics. Breaks free rusted or frozen parts caused by rust and corrosion. Contains a non-evaporating lubricant to protect against further rust and corrosion. Use on automotive, industrial, marine, plumbing and other equipment. Aerosol can. Strong automatic transmission sealer, stops leaks fast, compatible with most ATF, conditions seals, shift improver. In a plastic bottle.
WD-40 10000 Spray Bottle Radiator Specialty M5012 Lead Substitute Gas Treatment Carb Medic M4814 Chlorinated Carburetor Cleaner
Spray applicator for use with WD-40 oil, sold separately. Replaces lead protection, contains valve seat anti-wear additive, intended for off-road use. 1 bottle treats up to 20 gallons. In a plastic bottle. Powerful solvents, removes dirt, varnish, gum and sludge, cleans the carburetor and combustion chamber of gasoline engines, NOT FOR SALE IN CALIFORNIA. Aerosol can.
Lubrimatic 11-301 Straight Grease Fitting Permatex 77134 Anti-Seize Lubricant 3-IN-ONE 100703 Oil With Telescoping Spout
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Protects metal parts from seizing and galling at temperatures up to 2400 degrees F (1316 degrees C). Copper-free, use under conditions of extreme pressure and temperature, with stainless steel, titanium and nickel alloys. Suggested applications: exhaust manifold bolts, exhaust system bolts, muffler clamps and tailpipe assemblies. Fits into hard-to-reach places and delivers oil precisely where needed. 6" telescoping marksman spout. Ergonomically shaped bottle is easier to use. On and off twist tip to avoid spilling. Clear product fill indicator shows when the oil level is getting low.
Gunk M914 Silicone Lubricant Lubrimatic 05-061 Curved Grease Gun Extension Carb Medic M4815NC Non-Chlorinated Carburetor Cleaner
Stops squeaks, rust, and corrosion. Excellent mold release. Brightens rubber, vinyl, and leather. Protects aluminum and chrome from pitting. Contains no chlorinated solvents. Spray-on sliding or rolling surfaces to reduce friction, or on surfaces for protection. Aerosol can. Standard length pipe for most hand operated grease guns. 1/8" NPT each end, 30-degree angle. Powerful blend of low VOC solvents, removes dirt, varnish, gum and sludge, cleans the carburetor and combustion chamber of gasoline engines, 50-state compliant. Aerosol can.
Radiator Specialty M5112 Gasoline Octane Booster Gumout 800001371 Fuel Injector Cleaner Blaster 16TDL Dry Lubricant
Restores engine performance. Contains additives that remove water and fight rust. Reduces emissions, knock, ping and hesitation. Cleans injectors, intake valve, and combustion chamber deposits. Removes deposits which tend to cause engine octane requirements to rise. After use of product, many engines will accept regular unleaded gasoline without knocking, pinging and after-run. In a plastic bottle. Helps clean fuel injectors, prevent future deposit build up and improve fuel economy and acceleration. Treats 21 gallons of fuel. Formulated to assist in the preventative maintenance of two and four-cycle engines. Effectively cleans carburetors and air intake systems. Dissipates moisture, inhibits rust and frees rings and valves, restoring compression, power and vacuum. Removes carbon, gum and varnish deposits. Add to air intake and spark plug hole after winter layover. Aerosol can.
Permatex 81343 Anti-Seize Lubricant Liquid Wrench L711 Chain and Wire Lubricant Blaster 16-GDL Door Lubricant
A highly refined blend of aluminum, copper and graphite lubricants. Use during assembly to prevent galling, corrosion and seizing and to assure easier disassembly. Temperature range: -60 to 1,600 degrees Fahrenheit. Salt, corrosion and moisture resistant for marine use. For easy removal of spark plugs, cylinder head and exhaust head bolts. Meets Mil Spec #907E, Level 3 NFPA Fire Code. Tube, carded. Apply to any chain or wire cable. Safe for rubber O-rings and standard chains Stays put on moving parts, anti-sling formula. Reduces friction, prevents corrosion, reduces wear, quiets, extends life. Aerosol can. Silicone-based lubricant with Teflon that leaves a tack-free film that won?t accumulate dust and dirt. Helps stop squeaks associated with garage doors and mechanisms. Reduces friction, extending the life of garage doors. Use on garage doors, overhead doors, hinges, rollers, cables, springs, bearings, bushings, tracks, chains and more. Aerosol can.
Solder Seal Gunk Steer Seal M1712 Power Steering Sealer Sta-Bil 22204 Performance Improver Fuel Stabilizer Liquid Wrench L212 Lubricant
Rejuvenates seals, for most domestic and foreign vehicles, for aging systems. 2 oz treats unit. In a plastic bottle. Blend of additives prevents fuel from deteriorating. Stops the formation of varnish and prevents corrosion. Use in any vehicle or power equipment used infrequently or stored for more than 60 days. Also treats fuel in gas cans or storage tanks, and ensures quick, easy starts in all 2- and 4-cycle engines. Use in gas, gas/oil mixes, oxygenated fuel and reformulated gas. 1 oz. keeps 2-1/2 gallons fresh for 12 months, 10 oz. treats 25 gallons, 16 oz. treats 40 gallons and 32 oz. treats 80 gallons. Stops squeaks and ease sticking parts, protects against rust, use for light to medium lubrication on exterior locks, electronic appliances and small hinges. Aerosol can.
Blaster 16-LG Grease Marvel Mystery MM080R Air Tool Oil With Childproof Cap Gumout 800001706 Octane Booster
Low-odor, clean, white grease that lubricates by creating a protective barrier. Protects against moisture and oxidation and is safe for a wide range of applications. Keeps surfaces lubricated in extreme temperatures. Withstands heavy loads. Use on open lube points and high-load applications. Specially formulated for use in all piston type and rotary air tools, as well as in-line air lubricators. Prevents rust formation while providing positive lubrication for smooth starting and longer tool life. Assures maximum performance by dissolving gum and sludge that cut down tool speed and reduce power output. Helps stop knocks and pings, boost octane rating. Use with up to 15 gallons of gasoline every fill up.
Scepter 3896 Drain Pan Plews 75-009 Utility Funnel Permatex 80070 Spray Silicone Lubricant
Resistant to chemicals and solvents; will not rust, dent, or corrode. Lightweight, general purpose tin-coated steel funnels. Capacity indicates what the funnel will hold when the outlet is blocked. Lubricates and waterproofs all types of mechanical equipment. Stops friction and squeaks. High-silicone formula does not attract dust or dirt. Prevents binding, sticking and deterioration. Non-gumming; will not mar paint, rubber, or plastic surfaces. Waterproofs and electrically insulates. Use on precision instruments, vending machines, motors, dies, controls, electronic equipment, industrial machinery, rolling and sliding mechanisms, hinges, windows, doors, locks, linkages, and springs. Level 1 NFPA Fire Code 30B. Aerosol can.
Plews 11-855 Standard Grease Fitting Assortment Liquid Wrench L106 Penetrating Oil STP 78568 Complete Fuel System Cleaner
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Includes 4 straight, 2 45-degree, and 2 90-degree fittings. Frees stuck nuts, bolts and locks, dissolves rust and cuts through grease, quickly penetrates corrosion, use on garden hose nozzles, clamps, pipes and frozen mechanisms. Aerosol can. Helps clean and protect the entire fuel system from performance loss with just one treatment. Contains the highest level of detergents of any STP formula. Helps clean fuel injectors, carburetors, intake valves and ports, combustion chambers, cylinder heads and piston tops. It contains jet fuel, a high-quality carrier of active ingredients. Helps to restore lost power and acceleration, reduce hard starts and engine hesitation and stop knock and ping. Treats up to 21 gallons. Use twice a year.
Liquid Wrench M3312 Hydraulic Jack Oil Lubrimatic 11-957 Assortment Grease Fitting Kit Sta-Bil 22265 Fuel Treatment
Formulated with extreme pressure additives, for use in all hydraulic jacks. In a plastic bottle. Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Includes 4 straight, 2 45-degree, and 2 90-degree fittings. 6mm -1.0 thread. For use in cars, trucks and small engines. Prevents corrosion, helps remove water from fuel. Cleans fuel injectors, carburetors and intake valves for better overall performance. Use at every fill up.
Gumout 800002230/7460 Jet Spray Cleaner Liquid Wrench L112 Penetrating Oil Liquid Wrench L616 Grease with Cerflon
Cleans the inside and outside of carburetor right down to the bright bare metal. Frees sticking automatic chokes, manifold heat controls, and cleans the PVC valve and all carburetor linkage. Removes gum, varnish and dirt instantly. Aerosol can. Frees stuck nuts, bolts and locks, dissolves rust and cuts through grease, quickly penetrates corrosion, use on garden hose nozzles, clamps, pipes and frozen mechanisms. Aerosol can. When sprayed it penetrates like oil, then creates a thick water and heat resistant grease coat for long-lasting, heavy-duty lubrication. Does not freeze, melt or run. For use on moving parts exposed to the elements. With extension tube for hard to reach applications. Aerosol can.
FUNNEL PLASTIC RED 1PT        Specialist 300028 Grease Skil 80111 Gear Oil
FUNNEL PLASTIC RED 1PT
Our Price : $5.69
High visibility red plastic funnel, built in screen. Long lasting lubrication and rust inhibiting barrier. For metal-to-metal applications, preventing rust and corrosion. Sprays on evenly as a liquid and sets dry for a thick, protective coating that will not wash off. Temperature range 0 to 300 degrees F. For use on auto hinges, gears, sprockets, outdoor hinges, latches, overhead door tracks, pulleys, cables, and guide rails and for lubricating equipment before placing in storage. 50-state VOC compliant. For all Worm Drive circular saws.
Lubrimatic 10-200 Economy Flexible Grease Gun Hose Rain?X 800002243/RX11212 Original Glass Treatment Specialist 300004 Penetrating Lubricant
For use on hand operated grease guns only. Steel 1/8" NPT male fittings on each end. Economy hoses has a 3,000 PSI working pressure and standard-duty hoses has a 5,000 PSI working pressure. Dramatically improves wet weather driving visibility, with and without wipers. Repels rain, sleet, and snow, frost, salt, mud, bugs and grime. Frees corroded nuts and bolts, penetrates rust. 50-state VOC compliant. With Blu Torch technology, a blend of solvents, metal working fluids, and surfactants that provide fast-acting penetration. The capillary action penetrates into tight crevices, threads and seams to break the bonds that hold stuck parts together. Helps prevent rust and corrosion from re-forming and leaves behind a lubricating layer. Safe to use on plastics, rubber, and metal.
Specialist 300011 Water Resistant Silicone Lubricant Power Lube 5005 Fast Acting Lubricant CRC 5074 Silicone Lubricant
For use on cables, pulleys, guide rails, valves, linkages, hinges, locks, and more. Safe to use on all metal and non-metal surfaces including rubber, plastic, and vinyl. Dries fast and leaves a clear, non-staining film that protects against rust without stickiness or messy residue. Safe for temperature ranges between -100(-73) to 500(260) degrees F(C). 50-state VOC compliant. Quickly penetrates, lubricates, stops squeals, fights corrosion, and loosens rusted parts. Mint odor. Amber liquid, safe on most plastics. NSF H2 registered. Aerosol can. Stops sticking, binding, and squeaking on nylon, rubber, metal and non-metal surfaces. Forms a colorless, odorless, non-staining film that lubricates and protects in most metal to non-metal applications. Dry film eliminates binding and sticking while protecting most surfaces. Clear water-white film. Meets FDA Regulations CFR-21-178.3570 for lubricants with incidental food contact. Aerosol can.
Tri-Flow 20009TF Penetrating Lubricant Permatex 80075 Chain Lubricant Lubrimatic 11-311 Straight Grease Fitting
Penetrates quickly, displaces moisture, reduces friction and wear on moving parts, protects against rust and corrosion. Reduces buildup of dirt, dust, and abrasive particles. Loosens rusted parts, frees sticky mechanisms. Contains high-grade petroleum oils, micronized Teflon, and other ingredients to soften and remove dirt and corrosion, and keep equipment operating at its peak under heavy load, high wear, and severe temperature extremes. Use on bearings, rollers, drive chains, gears, locks, winches, shafts, sprocket housings, cables, tolls, conveyors, bolts, hinges, and cranks. Brown with a mild, fruity odor. Non-staining, safe on metal, wood, plastic, and rubber. Aerosol can. Cleans, lubricates and protects all types of roller chains that operate under exposed conditions. Easy to apply foaming action assures effective application. For any chain-driven tool or vehicle such as motorcycles, mopeds, chainsaws, lawn mowers, and bicycles. Aerosol can. Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking.
Lubrimatic 11-321 Straight Grease Fitting 3-in-One 100581 Penetrating Lubricant Lubrimatic 10-214 Economy Flexible Grease Gun Hose
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Permanently attached straw sprays two ways, either a stream or spray. Quick-drying, no-mess formula. Waterproofs and prevents rust and corrosion. Stops squeaks and eliminates sticking. For residential or commercial garage door system. For use on hand operated grease guns only. Steel 1/8" NPT male fittings on each end. Economy hoses has a 3,000 PSI working pressure and standard-duty hoses has a 5,000 PSI working pressure.
Moltan 7508 All Purpose Safety Absorbent Marvel Mystery MM12R Lubricant Oil Sta-Bil 22001 Fuel Stabilizer
Made from Montmorillonite clay, a naturally occurring mineral with superior absorptive ability. Designed for quick clean up of water, oil, and grease. Larger coarse product calcined at a higher temperature producing harder granules for better traction, permitting delayed waste disposal. All-purpose absorbent suitable for commercial or home. Safe for catalytic converters and oxygen sensors. Added to gas it cleans and lubricates fuel injectors and carburetors, improves gasoline mileage and extends spark plug life. Reduces and prevents varnish and gum build-up. Added to oil it prevents valve sticking and clatter, fortifies properties of engine oil, prevents breakdown caused by extreme temperatures, reduces and prevents acid and sludge formation and promotes easier cold weather starts. For all 2-cycle and 4-cycle gasoline engines. Coats internal engine parts to prevent corrosion.
Rain-X RX11806D Windshield Washer Fluid Additive Golden Rod 505 Spring Bottom Oiler CRC 5037 High Quality Grease
Professional strength cleaning compound. Removes tar, bug residue, wax, oil and mineral deposits. Can be used on glass and chrome. Double-seamed spring steel bottoms plus roll-threaded filler openings for leak-proof body-to-spout connection. 4-1/2" tapered spout. High-purity, NLGI Grade 2. Provides lubrication and durability in any weather. Versatile, designed for applications requiring a long grease life. Off-white viscous grease with solvent odor. 0 to 300 degrees Fahrenheit working temp. Aerosol can.
STP 78380 Diesel Fuel Treatment Hopkins 5063 Hand-E Grip Funnel DieselPower 15209 Complete Diesel Fuel System Cleaner
Helps maintain engine performance by preventing deposit build-up in diesel engines. Saves fuel by keeping injectors clean. Prevents rust and corrosion, fights fuel line freeze and wax formation. Contains no alcohol. May be used in combination with other STP fuel additives. Multi-purpose funnel features a large opening, mesh screen and easy grip handle on the outside for less mess. The self adjusting spout fits multiple openings securely. Made of tough, high density resin. Unit dimensions: 11" x 8.75" x 12.5". For diesel powered engines. Cleans power robbing deposits from fuel system. Lubricates fuel pumps and injector pumps.  Treats up to 35 gallons.
Marvel Mystery MM13 Lubricant Oil Blaster 16-LMT Tune-up Small Engine Cleaner Solder Seal Gunk TransMedic M3616 Transmission Treatment
Safe for catalytic converters and oxygen sensors. Added to gas it cleans and lubricates fuel injectors and carburetors, improves gasoline mileage and extends spark plug life. Reduces and prevents varnish and gum build-up. Added to oil it prevents valve sticking and clatter, fortifies properties of engine oil, prevents breakdown caused by extreme temperatures, reduces and prevents acid and sludge formation and promotes easier cold weather starts. Improves 2-cycle and 4-cycle engine performance instantly. Removes carbon, gum and varnish deposits that cause engine failure. Aerosol can. Non-synthetic, helps eliminate slippage, restore smooth shifting, reduces wear. In a plastic bottle.
Lubrimatic 10-201 Economy Flexible Grease Gun Hose Kelloggs 57555 Pure Silicone Lubricant Kelloggs 57580 Carburetor Cleaner
For use on hand operated grease guns only. Steel 1/8" NPT male fittings on each end. Economy hoses has a 3,000 PSI working pressure and standard-duty hoses has a 5,000 PSI working pressure. Polishes, protects and preserves. Will not stain or dry out. For hundreds of lubricating projects in and around the home. For use on engines that are not used regularly. Snow-blowers, mowers, chainsaws, trimmers, etc. Removes oil, varnish, gum and resin. Cleans PVC valves and linkage controls. Aerosol can.
LubriMatic 11316 Grease Power Lube 5006 Fast Acting Lubricant Sta-Lube Super White SL3151 High Purity Grease
Long-lasting, hard-working formula delivers high-performance in a wide range of heavy-duty applications. Recommended for chassis, universal joints, and other general-purpose applications around the home, farm, or shop. Works best for lubricating rolling parts. NLGI 2, 350 degrees Fahrenheit drop point. Quickly penetrates, lubricates, stops squeals, fights corrosion, and loosens rusted parts. Mint odor. Amber liquid, safe on most plastics. NSF H2 registered. Aerosol can. High-purity, NLGI Grade #2, provides lubrication and durability in any weather. Bright white for when appearance is important. 0 to 300 degrees Fahrenheit working temp, 350 degrees Fahrenheit drop point.
Lubrimatic 11-101 Standard Straight Short Grease Fitting Slide-All E450 Dry Lubricant Radiator Specialty M1815 Motor Medic Oil Treatment
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. For sticking or squeaking doors, windows, drawers, locks, zippers, musical instruments, moving machinery parts, skates, bikes, sleds, skis, reels, and guns. Works on metal, wood, rubber, glass, paint, leather, fabric, and plastics surfaces. Dries quickly, will not stain most items. Resistant to water, oil, and solvents. Clean with cloth or brush. Aerosol can. Keeps engines cleaner, cuts friction and engine wear, reduces smoke and oil burning. Use with each regular oil change. In a plastic bottle.
EF 310Z Automotive AC Oil Charger Liquid Wrench L512 Dry Lubricant with Cerflon Solder Seal Gunk M2732 Power Steering Fluid with Stop Leak
Contains 2 oz. ISO 100 viscosity PAG oil and 2 oz. 134a refrigerant, plus conditioners that penetrate and rejuvenate o-rings, gaskets and other rubber connectors to improve durability. Lubricates with no oily residue. Dries fast to prevent collection of dirt/dust. Works into surface for lasting lubrication to extend life and protect against wear. No residual odor. Solid lubricant that provides superior lubrication when compared to conventional oils. Aerosol can. Non-corrosive top off fluid designed for vehicles requiring non synthetic fluid to keep power steering fluids at proper levels. Helps prevent leaks by protecting seals and hoses. Formulated with detergent additives and anti-foaming agents. Intermixes with factory fluids, making steering easier and smoother. In a plastic bottle.
UltraLube 10301 Professional Bio-Based Grease Specialist 300059 Dry Lube DieselPower 15211 Octane Booster
Manufactured from USA grown renewable vegetable-base stocks which have a naturally higher viscosity index, so less friction, less heat and less wear, and are biodegradable. Rated LB. Dries quickly, provides long-lasting corrosion protection with no oily residue. Reduces friction and wear, will not attract dirt, dust or oil. 50-state VOC compliant. For diesel powered engines. Boosts Cetane (fuel ignitability) up 5-10 numbers. Increases power for towing. Maximizes fuel economy. Treats up to 35 gallons.
FUNNEL PLASTIC RED 2QT        Sta-Lube Moly-Graph SL3330 Extreme Pressure Grease Star Tron 14308 Enzyme Small Engine Formula Gasoline Fuel Additive
FUNNEL PLASTIC RED 2QT
Our Price : $6.99
High visibility red plastic funnel, built in screen. General-purpose for a wide range of applications. Lithium 12 Hydroxy NLGI No.2 protection of moly and graphite. Moly gray with mild odor. Based on mineral oil and lithium 12 Hydroxy Stearate. 45-lb. Timken load. 350 degrees Fahrenheit drop point, -25 to 250 degrees Fahrenheit working temp. Cures and prevents ethanol fuel problems. Improves fuel economy, reduces emissions and cleans entire fuel delivery system from tank to injectors and combustion chambers. Removes carbon deposits and helps prevent future deposits. Stabilizes gasoline for up to two years. 1 oz. treats 6 gallons of fuel, bottle treats up to 48 gallons of gasoline.
LubriMatic 11350 Grease Honeywell AS-401 Synthetic Brake Fluid Plews 75-011 Utility Funnel
Includes zinc additive for a clean, white color for general home, shop, auto, agricultural, and industrial applications. Contains no silicons, can be used on plastic components. NLGI #2, 350 degrees Fahrenheit drop point. High boiling point gives an extra margin of safety and is designed for safe operation of high-powered vehicles. For ABS, disc, and drum brake systems. DOT 3, meets or exceeds Federal Motor Vehicle Safety Standard 116 and SAE Spec. J1703. 284 degrees Fahrenheit min wet boiling point. Lightweight, general purpose tin-coated steel funnels. Capacity indicates what the funnel will hold when the outlet is blocked.
UltraLube 10300 Professional Bio-Based Grease Permatex 81943 Synthetic Lubricant with PTFE Freeze-Off 5002 Penetrating Lubricant
Manufactured from USA grown renewable vegetable-base stocks which have a naturally higher viscosity index, so less friction, less heat and less wear, and are biodegradable. Rated LB. NLGI Grade 2 GC/LB grease. Formulated with PTFE to provide maximum protection against friction, wear and corrosion. Provides superior water-washout resistance, protects load bearing parts subject to extreme pressure. Safe on rubber, plastic, metal, wood, leather, fabrics and painted surfaces. Odor free and non-staining, translucent color. Temperature range: -28 to +204 degrees C (-20 to 400 degrees F). Non-drying orange colored liquid with the smell of pine. Immediately drops the temperature of the area in direct contact with the spray. The freezing effect cracks rusted surfaces to reach deeper and work more effectively than other penetrants. Flashpoint is 126 degrees F. Low VOC formula. Aerosol can.
Permatex 80078 Anti-Seize Lubricant Plews 10-219 Flexible Grease Hose Liquid Wrench L116 Penetrating Oil
Heavy-duty blend of aluminum, copper, and graphite lubricants in a petroleum base. Use on boiler and oven parts, gears, chains, cables, sprockets, levers, pivots, rollers, valve stems, jet engines, and industrial turbines during assembly to prevent galling, corrosion, and seizing, and to assure easier disassembly. Inert, will not evaporate or harden in extreme temperatures. Salt, corrosion, and moisture resistant. -60 to 1600 degrees Fahrenheit temperature range. Meets Mil Spec A-907, level 3 NFPA Fire Code 30B. For use on hand operated grease guns only. Steel 1/8" NPT male fittings on each end. Economy hoses has a 3,000 PSI working pressure and standard-duty hoses has a 5,000 PSI working pressure. Frees stuck nuts, bolts and locks, dissolves rust and cuts through grease, quickly penetrates corrosion, use on garden hose nozzles, clamps, pipes and frozen mechanisms. Contains no silicone.
Tri-Flow 20005TF Penetrating Lubricant Sta-Bil 22206 Performance Improver Fuel Stabilizer Lubrimatic 11-151 Standard Straight Short Grease Fitting
Penetrates quickly, displaces moisture, reduces friction and wear on moving parts, protects against rust and corrosion. Reduces buildup of dirt, dust, and abrasive particles. Loosens rusted parts, frees sticky mechanisms. Contains high-grade petroleum oils, micronized Teflon, and other ingredients to soften and remove dirt and corrosion, and keep equipment operating at its peak under heavy load, high wear, and severe temperature extremes. Use on bearings, rollers, drive chains, gears, locks, winches, shafts, sprocket housings, cables, tolls, conveyors, bolts, hinges, and cranks. Brown with a mild, fruity odor. Non-staining, safe on metal, wood, plastic, and rubber. Aerosol can. Blend of additives prevents fuel from deteriorating. Stops the formation of varnish and prevents corrosion. Use in any vehicle or power equipment used infrequently or stored for more than 60 days. Also treats fuel in gas cans or storage tanks, and ensures quick, easy starts in all 2- and 4-cycle engines. Use in gas, gas/oil mixes, oxygenated fuel and reformulated gas. 1 oz. keeps 2-1/2 gallons fresh for 12 months, 10 oz. treats 25 gallons, 16 oz. treats 40 gallons and 32 oz. treats 80 gallons. Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking.
Lubrimatic 11-159 Standard Grease Fitting Lubrimatic 11-167 Standard Grease Fitting Star Brite 84812 Fogging Oil
Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Precision engineering to withstand the rugged use from most automotive, farm and industrial applications. Built-in ball check to eliminate leaking. Spray formula coats all interior engine surfaces with a polymer coating that prevents corrosion during winter storage. Protects internal surfaces for over one year, will not foul plugs/injectors.
UltraLube 10308 Professional Bio-Based Grease Radiator Specialty M6912 Diesel Fuel Anti-Gel No-Leak 20601 Transmission Treatment
Resists heat, water and oxidation. Biobased product formulated from renewable, biodegradable USA grown vegetable oils, designed to replace and mix readily with conventional petroleum products. More environmentally friendly lubricant. Rated LB. Performance-tested to meet requirements of professional truck drivers. Works in both heavy-duty and passenger car diesels. Provides better performance, improves fuel economy. Reduces emissions and fuel line and filter icing by dispersing water. Cetane improver increases cetane with most fuels for easier starting in cold weather. Stabilizes fuel to prevent oxidation and corrosion. Enhanced lubricity protects against pump and injector wear. 1 quart treats 125 gallons. Stops and prevents transmission leaks. Safe and compatible with all transmission fluids. Stops hard shifting and repairs seals. Easy to use spout cap.
Amrep ZUABS3 All Purpose Instant Spill Absorbent No-Leak 20401 Engine Oil Treatment No-Leak 20301 Power Steering Treatment
All-purpose, absorbs oil, solvents, waste paint and antifreeze. Ultra light weight. Low dust, non clay formulation. Stops and prevents engine oil leaks. Safe, compatible with all engine oils. Recommended for rear main seal repair. Stops smoke and repairs rear main seals. Stops and prevents power steering leaks. Safe, compatible with all power steering fluids. Stops squeaks and repairs o-rings and seals.
Lucas Safeguard Ethanol Fuel Conditioner WATER REPELLENT PLASTIC 12OZ  Rain-X 800002250 Original Glass Treatment
For ethanol based fuels. This applies to E-10, E-15, E-85, pure ethanol and any mixtures in between including gasoline. Completely soluble in all ethanol fuels and will not harm filters. Contains effective additives to prevent rust and corrosion associated with the use of ethanol fuels. Cleans injectors, valve seats, combustion chambers and other critical fuel components. Stabilizes fuel and prevents varnish and gum formation in ethanol and gasoline. One ounce treats five gallons of ethanol fuel. Provides a superior water beading coating on various plastics. Watch water bead up and roll away on motorcycle windscreens, goggles, visors and boat windshields for improved visibility. For best results, use a cotton cloth. Do not use a paper towel. Dramatically improves wet weather driving visibility, with and without wipers. Repels rain, sleet, and snow, frost, salt, mud, bugs and grime.
   
 
1 2 3