|
|
|
|
|
|
|
|
|
|
|
Glass tube. Plated brass end caps. Includes 2 each: SFE-14, SFE-20 and SFE-30 fuses.
|
Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
|
In-Line black fuse holder for ATC blade-type fuses from 3 to 30 Amp, number 12 yellow lead wire. Maximum continuous current rating of 24 Amps or 80% of the fuse rating, whichever is less.
|
|
|
|
|
|
|
|
|
|
|
|
|
Original electronic fast acting fuse. 1/4" x 1-1/4" glass tube with nickel-plated brass endcaps. 250 volt maximum. UL Listed, CSA certification.
|
Original electronic fast acting fuse. 1/4" x 1-1/4" glass tube with nickel-plated brass endcaps. 250 volt maximum. UL Listed, CSA certification.
|
Original electronic fast acting fuse. 1/4" x 1-1/4" glass tube with nickel-plated brass endcaps. 250 volt maximum. UL Listed, CSA certification.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
|
Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
|
Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
|
Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
|
Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. Housing material UL-Rated 94V-0 thermoplastic. UL-Recognized.
|
Original electronic fast acting fuse. 1/4" x 1-1/4" glass tube with nickel-plated brass endcaps. 250 volt maximum. UL Listed, CSA certification.
|
Assorted, one each blade fuses.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use on parking light, directional light and side marker light. 1-7/8" x 5', on a card.
|
Use on parking light, directional light and side marker light. 1-7/8" x 5', on a card.
|
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC.
|
|
|
|
|
|
|
|
|
|
|
|
|
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC.
|
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC.
|
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC.
|
|
|
|
|
|
|
|
|
|
|
|
|
Basic black switch for special applications. Mount in 1/2" round hole or modular panel No.40610 (SKU 105-6753).
|
Die-cast construction with ON/OFF face plate. Set screw terminals. 15 Amp at 12-Volts DC, 6 Amp at 125-Volts AC, and 3 Amp at 250-Volts AC. Mounts in 1/2" hole.
|
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC.
|
|
|
|
|
|
|
|
|
|
|
|
|
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC.
|
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC.
|
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant.
|
With wire gauge matched to circuit amperage. 10 Amps, 18 AWG, fuse not included.
|
Universal nylon twist-lock fuse holder, for AGC, AGA, AGW, AGX and SFE fuses. 20 Amp, #14 lead wire.
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire gauge matched to circuit amperage. Twist and lock style holder includes fuse. 20 Amps, 12 AWG, fuse included.
|
Wider, short chrome handle for ease of use and limited space installations. Mounts in 1/2'' hole or modular panel No.40610 (SKU 105-6753).
|
In-Line fuse holder for MINI fuses. 32 Volt DC maximum voltage rating. Body material withstands high temps. Protective cover has removable straps.
|
|
|
|
|
|
|
|
|
|
|
|
|
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412.
|
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412.
|
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412.
|
|
|
|
|
|
|
|
|
|
|
|
|
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412.
|
Basic black switch for special applications. Mount in 1/2" round hole or modular panel No.40610 (SKU 105-6753).
|
Large face allows easy contact. Complete with clamp bracket and screw terminals. Contains all mounting hardware and components.
|
|
|
|
|
|
|
|
|
|
|
|
|
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412.
|
Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. Amperage marking is OCR compliant. UL recognized (3-30A) Guide JFHR2, File E56412.
|
ATC low amp fuse assortment: 1, 2, 3, 4, 5 (2) and 7-1/2 (2) amps.
|
|
|
|
|
|
|
|
|
|
|
|
|
Handle glows when circuit is on. Fits 1/2" hole or modular panel No.40610 (SKU 105-6753). 0.250" copper terminals.
|
Rocker glows when circuit is on. Mounts flush in 1-1/8" x 7/16" rectangular hole or modular panel No.40650 (SKU 477-8916).
|
Wider, short handle for ease of use and limited space installations, glows when circuit is on. Mounts in 1/2'' hole or modular panel No.40610 (SKU 105-6753). 0.250'' copper terminals.
|
|
|
|
|
|
|
|
|
|
|
|
|
Tough molded acrylic lens. Used to replace lenses of Peterson Nos.440, 441, 444, and 452 series lights. 4-1/2" square.
|
Replaces most 12 volt wells.
|
Designed for the temporary repairs of broken or cracked taillights, parking lights and side directional lights.
|
|
|
|
|
|
|
|
|
|
|
|
|
Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4"W x 1" x 1-1/8"D, mounts on 2-3/4" centers.
|
Functions as clearance, side marker or identification light and may be used as combination side marker and clearance light when properly mounted. Durable base with external mounting holes. Lens snap-locks onto base. Includes single lead wire and grounds through mounting screw. 3-1/4"W x 1" x 1-1/8"D, mounts on 2-3/4" centers.
|
With rubber seal and mounting tab. 30 amp, 10 AWG. Fuse not included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Glass tube. Plated brass end caps. 1/4" diameter x 1-1/4" length. 32 volt AC/DC.
|
For blade type fuses. 20 Amp, 12 AWG, with wire gauge matched to circuit amperage. Fuse included.
|
Black European designed with brass set screw terminals. Mounts in 5/16" to 1/2" hole or modular panel No.40610 (SKU 105-6753).
|
|
|
|
|
|
|
|
|
|
|
|
|
Glass tube. Plated brass end caps. Includes: (1) AGC-7-1/2, (2) AGC-10, (2) AGC-15, (2) AGC-20, (1) AGC-25 and (2) AGC-30 amp fuses.
|
Brass plated case, nickel plated switch, resists corrosion. Brass set screw terminals.
|
AGC low amp fuse assortment: 1 (2), 2 (2), 3 (2), 4, 5 (2) and 6 amp.
|
|
|
|
|
|
|
|
|
|
|
|
|
Metal nickel-finished toggle with two 6'', 16 AWG wire leads. Used for shop equipment. Mounts in 1/2'' hole or modular panel No.40610 (SKU 105-6753). 10 amp at 12 volts DC, 8 amp at 125 volts AC, and 4 amp at 250 volts AC. UL Listed.
|
Switch is on when pulled out. Mounts in 1/2'' hole. Chrome case and pull with nickel-plated set screw terminals.
|
Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Eight fuses and one puller.
|
Acrylic lens features built-in reflector and precision OE style, prism optics for a brilliant signal and to eliminate the need for a separate reflector. Includes a durable molded base with single bulb socket and single lead wire; grounds through mounting screw. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers.
|
Blown fuse indication. Fuse illuminates when blown. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. UL Recognized.
|
|
|
|
|
|
|
|
|
|
|
|
|
Blown fuse indication. Fuse illuminates when blown. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. UL Recognized.
|
Blown fuse indication. Fuse illuminates when blown. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. UL Recognized.
|
Blown fuse indication. Fuse illuminates when blown. Fast acting low voltage supplementary fuses, automotive blade style fuse. Voltage rating: 32VDC. UL Recognized.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fuse assortment: 7-1/2, 10, 15, 20, 25 and 30A.
|
ATM low amp assortment: 2, 3 (2), 4, 5 (2) and 7-1/2 (2)A.
|
Color coded, 5.5 mm blade centers with a 6.0 mm width and .81 mm thick blades.
|
|
|
|
|
|
|
|
|
|
|
|
|
For courtesy, interior or instrument lights; commonly used to illuminate license plate or step bumpers. Chrome plated steel housing snaps into 1-1/4" diameter holes. 1-1/2" diameter overall. 2 required for legal license illumination.
|
Color coded, 5.5 mm blade centers with a 6.0 mm width and .81 mm thick blades.
|
Color coded, 5.5 mm blade centers with a 6.0 mm width and .81 mm thick blades.
|
|
|
|
|
|
|
|
|
|
|
|
|
Brass set screw terminals. Mounts in 1/2" hole or modular panel No.40610 (SKU 105-6753). 15 Amp at 12-Volt DC, 6 Amp at 125-Volt AC, 3 Amp at 250-Volt AC. UL Listed.
|
Fast acting for maximum protection. Glass tube construction. Nickel or silver-plated brass. 5mm x 20mm. UL/CSA 248-14 rated.
|
Chrome and nickel-plated set screw terminals. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use to repair red automotive lenses. 1.5" x 60", carded.
|
Illuminating blade fuses and holders use LED technology if a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. UL recognized.
|
Illuminating blade fuses and holders use LED technology if a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. UL recognized.
|
|
|
|
|
|
|
|
|
|
|
|
|
Illuminating blade fuses and holders use LED technology if a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. UL recognized.
|
Illuminating blade fuses and holders use LED technology if a fuse has blown, making them easy to spot in fuse panels tucked up under dark dashboards. Voltage rating: 32 volts DC (or less). UL Rated 94VO thermoplastic housing material. Zinc alloy composite terminal material with silver plating. 1,000 amperes interrupt rating. UL recognized.
|
Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light, and may be used as combination clearance and side marker when properly mounted on 3" centers and grounded through mounting hardware; single wire for electrical connection. 15,000-hour long life bulbs. 4" width x 2" height x 1-1/8" depth.
|
|
|
|
|
|
|
|
|
|
|
|
|
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000-hour long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers.
|
Acrylic lens snaps onto housing. Two bulb lamp functions as clearance or side marker light, and may be used as combination clearance and side marker when properly mounted on 3" centers and grounded through mounting hardware; single wire for electrical connection. 15,000-hour long life bulbs. 4" width x 2" height x 1-1/8" depth.
|
Acrylic lens snap-seals onto housing. Single wire connection, grounds through mounting hardware. 15,000-hour long-life bulb. When properly mounted, may be used as combination side marker and clearance light. 4-1/8"W x 2"H x 1-1/32"D, mounts on 3" centers.
|
|
|
|
|
|
|
|
|
|
|
|
|
Black with long-life, vibration-resistant colored LED that glows when circuit is on. 1-1/8" x 7/16" mounting hole.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
|
|
|
|
|
|
|
|
|
|
|
|
Die-cast body, extra-long chrome handle. Includes ON/OFF face plate and copper set screw terminals. Mounts in 1/2" hole or modular panel No.40610 (SKU 105.6753).
|
For vehicle electrical systems at nominal voltage of 60 DC volts (25 AC volts) or less. PVC outer jacket resists water, oil and chemicals. Full gauge stranded copper for higher current carrying capacity. Used for rewiring generator, battery to ammeter, heater switch, panel lights, horn to relay and battery. SAE Standards and RoHS Compliant.
|
Black with long-life, vibration-resistant colored LED that glows when circuit is on. 1/2'' round mounting hole.
|
|
|
|
|
|
|
|
|
|
|
|
|
Black with long-life, vibration-resistant colored LED dot that glows when circuit is on. 12 volt DC. 1-1/8" x 7/16" mounting hole.
|
Black rubber boot button, brass-plated case and brass set screw terminals resist corrosion for marine and RV starter circuit.
|
Stud mount side marker or clearance light with built-in reflector optics to eliminate the need for a separate reflector. Push stripped power wire into "Quick Lock" port to connect. Single wire for electrical connection. Features 15,000-hour long life bulb. 2-3/4"W x 2-1/8"H x 1"D.
|
|
|
|
|
|
|
|
|
|
|
|
|
Mounts with two stainless steel screws on 2" centers and has separate ground wire for non-metallic surfaces. Polished, chrome-plated brass housing with hooded shield to prevent upward glare. 2-9/16" width x 1-3/16" height x 1" depth.
|
Chrome-plated steel housing and mounting bracket in traditional styling for numerous applications. 1-7/8" projection; 2-3/4"W x 2"H bracket mounts on 2" centers.
|
ATR 2-leg micro fuse emergency kit: 5, 7-1/2, 10, 15, 20, 25 and 30A, with fuse puller.
|
|
|
|
|
|
|
|
|
|
|
|
|
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 9-16 volt. Hard-wired with separate lead and ground wires for mounting to all surfaces. 2-3/4"W x 5/8"H x 3/4"D, mounts on 1-15/16" centers. 100,000-hour rated life. Made in USA.
|
Fast-acting glass tube fuse. With gold-plated end caps for high-end stereo and AV markets. 13/32" x 11/2".
|
Used for shop equipment. Brass set screw terminals. 15 Amp at 12 volt DC, 20 amp at 125 volt AC, 10 amp at 250 volt AC, and 3/4HP 120 at 250 volts AC. UL Listed.
|
|
|
|
|
|
|
|
|
|
|
|
|
Dip sealed in special rubberized coating compound to seal against dust and moisture. Toggle boot included. Mounts in 1/2" hole or modular panel No.40610 (SKU 105-6753). UL Listed.
|
Contains one each of 10, 15, 20, 25 and 30 amp easy ID illuminating ATC fuses.
|
Clear or painted glass T-3 1/4 bulb with C-2F filament.
|
|
|
|
|
|
|
|
|
|
|
|
|
Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10" lead wires. Universal stud mount with 1/4" studs on 2" centers. 3-3/4"H x 2-5/8"D overall.
|
Sealed 2-diode LED light alternative to traditional incandescent 154-series lights. Operates from 9-16 volt. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16"L x 1-1/16"W x 15/16"D.
|
Sealed 2-diode LED light alternative to traditional incandescent 154-series lights. Operates from 9-16 volt. Features 2-wire, hard-wired design. Ground wire includes #10 ring terminal. Mounts on 3" centers. Mounting gasket included. One-piece housing sealed with epoxy eliminates weld joints. 4-1/16"L x 1-1/16"W x 15/16"D.
|
|
|
|
|
|
|
|
|
|
|
|
|
Die-cast construction with black rubber boot seal and brass set screw terminals. For starters on industrial and motorsport vehicles. Mounts in 5/8" hole.
|
Diagnostic Kit contains 5, 10, 15, 20, 25 and 30 amp ATC fuses and an FT-3 fuse tester/puller.
|
Contains one each of 10, 15, 20, 25 and 30 amp easy ID illuminating ATM fuses.
|
|
|
|
|
|
|
|
|
|
|
|
|
C-2V filament, G-4 1/2 bulb - BA-9S base. 500 average life hours.
|
Die-cast construction with copper set screw terminals for industrial, farm and motorsport vehicles. 75 amp at 6 to 28-volts DC.
|
Functions as clearance or side marker light. 2-wire, hard-wired design. Operates from 9-16 volts. Ground wire includes number 10 ring terminal. Mount using center stud or two mounting screws. 3-1/8" width x 2" height x 15/16".
|
|
|
|
|
|
|
|
|
|
|
|
|
C-2F filament, G-4-1/2 bulb - BA-9S base. 2,000 average life hours.
|
S-8 bulb, C-6/C-6 filament.
|
S-8 bulb, C-6/C-6 filament.
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear or painted amber glass S-8 bulb with C-6/C-6 filament for auto back-up light or turn signal; auto/truck back-up, turn signal or high-mount stop.
|
Durable black ABS housing with snap on lens functions as a stop, turn, and tail light. Interchangeable with similar competitive units. 2 lead wires exit through 1-9/16"H x 1/2" diameter hollow stud. 4-1/8" diameter, 2-3/8"D overall.
|
Sturdy plastic housing with a black finish. Brass socket and Lexide lens gasket for long life. 5-1/2" face diameter, 4-1/2" diameter inset, and 1-1/2"D overall.
|
|
|
|
|
|
|
|
|
|
|
|
|
Wrap-over lens retained by 2 screws. Black, plastic dust-resistant housing. Supplied with 10" lead wires. Universal stud mount with 1/4" studs on 2" centers. 3-3/4"H x 2-5/8"D overall.
|
Under-80" wide combination tail light. Includes the following functions: stop, turn, tail, rear reflex, side marker, and side reflex. Includes lead wire. Grounds through 1/4" mounting studs. 5"W x 4-1/2"H x 2-7/8"D overall, studs on 2" centers.
|
Light functions as combination turn signal, parking light, or warning light. Durable, black ABS housing with two snap-on amber lenses. Two lead wires exit through 1/2" diameter hollow mounting stud. Grounds through mounting stud. Converts to single-face amber light by snapping on black back. 4-1/8" diameter x 2-3/8'' wide. Mounting stud is 1-9/16" long.
|
|
|
|
|
|
|
|
|
|
|
|
|
Sealed 2-diode LED light that functions as clearance or side marker light. Operates from 8-16 volt. Hard-wired with separate lead and ground wires for mounting to all surfaces. Mounts on 1-15/16" centers. 100,000-hour rated life. 4" width x 1-1/3" height x 15/16" depth. Made in USA.
|
C-6 filament, G-6 bulb - BA15s base. 750 average life hours.
|
Festoon 10mm bulb, SV8.5mm base, C-8 filament.
|
|
|
|
|
|
|
|
|
|
|
|
|
C-6 filament, B-6 bulb. 200 average life hours.
|
Clear or painted amber glass S-8 bulb with C-6/C-6 filament for auto back-up light or turn signal; auto/truck back-up, turn signal or high-mount stop.
|
C-6 filament, G-6 bulb - BA15s base. 5,000 average life hours.
|
|