Home > LAWN & GARDEN > LANDSCAPE FENCING/FARM FENCING > FENCING
Sort By:
1 2 3 4
Heavy DC cap for chainlink fencing. Used on chain link fencing. Regular brace band for chain link fence.
For chainlink fencing. Heavy DC cap for chainlink fencing. Small screw-in insulator.
For chain link fencing. Used to join two pieces of 1-3/8'' tubing at a 90 degree angle. Requires the use of one (578.0556) 5/16'' x 1-1/4'' long carriage bolt and nut. For chainlink fence.
Molded of tough, high quality plastic with shockproof thickness for safe handling protection. Large screw-in insulator. For splicing polytape up to 1/2" wide. Allows for fast, secure joining of polytape rolls. Connects one polytape to another without losing juice.
For chain link fence terminal post connecting into top rail. Joins lengths of top rail. For chain link fence terminal post connecting into top rail.
For firmly securing an electrified wire to corner posts without losing energy through the post. Formed of thick, tough plastic. Can withstand the strain of wire at corner of electrified fence. For 9-22 gauge high-tensile steel wire and aluminum wire, all polywire (regular and heavy duty), and polyrope up to 1/4" in diameter. Can use on chain link fence. Made of virgin, high impact polyethylene. To be used with lightweight smooth wire or Red Snap'r electric fence wire (install after insulator is attached to post). Fastener snaps open and shut for easier wire installation. Compression spring assembly will keep tension on wire but spring will never wear out. Large wire hook is designed to straighten out if livestock should run through gate. Hook can then be bent back. Bright yellow shields for high visibility and easy recognition. Withstands cold weather.
One-piece molded. Floats on a compression spring assembly. All the tension rests on the rugged steel assembly. Durable, poly-coated steel. Bolt 2 posts together for extra support. Special channel construction for maximum strength. Fencing should be one foot shorter than posts for proper fence to post tab alignment when installed. Self-drilling, screw-in electric fence insulator that can be used with any type of wire, including high tensile. Made of sturdy plastic. Easy to install.
Made of virgin, high impact polyethylene. Designed for quick, easy installation. For use with heavy gauge wire and barbed wire. Tension bar for chainlink fence. Ridged design enables the staple to lock without penetrating insulator profile. Made of non-conductive polyethylene.
125 to 145 Breaking Load Limit. For splicing together 1/4" polyrope. Allows for fast, secure joining of polyrope. Can also be used to make electrical connections between fence lines and the fence charger. Connects 1/2" polytape to another without losing power so you can reach distant electric fence posts. Use at the ends of polytape for dead-ending or gate handle connections.
Allows you to connect one polyrope to another to reach all of your fence posts. Super tough fiberglass reinforced electric fence post. Unique step-in design with adjustable insulators that can be used with Baygard wire, Bayshock wire or Baygard HV tape. Designed for improved strength. Complete with 4 versatile insulators that can accept wire, tape and rope. Weather resistant. Non conductive and lightweight. Anchoring gate handles. This insulated anchor is to be used in conjunction with the gate handle. The screw-in design type is for wood gate posts.
Use with fence wire and polyrope. Insulates against shock. Connects 1" polytape to the end insulators to reach all of your fence posts. For chain link fence terminal post connecting into top rail.
Standard, snug fitting T-post insulator. For fastening electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25. Model clips hold electric fence wire and polytape (up to 2" wide). Molded of reinforced polypropylene with a heavy-duty steel stake. Extra reinforcing ribs for strength. Features large step-in flange and anti-rotation spike to keep stake from turning. Includes 8 wire holders. Heavy duty fence post keeps your property protected. Molded clips to hold electric fence wire and poly tape (up to 2" wide. Each 4' post molded from reinforced polypropylene with a heavy-duty steel stake.
For chain link fencing. For connecting a fence charger to polytape. This clamp connects the fence charger connects the fence charger to polytape anywhere in the fence line where an electrical connector plate is inaccessible.  Connects the polytape to the energizer. Used to wrap MG spacer clips No.400-430T to wire while securing poly spacer posts No.200-260. Also used for twisting 12.5, 11 and 9-gauge wire.
Connects 1/2'' polytape to the end insulators to reach all of your fence posts. For chainlink fencing. For clamping panels of chainlink fencing or pet kennels.
For chainlink fencing. Used in the construction of dog kennels and chain link fences. Connects gate panels to 1-3/8'' tubing. 1-3/8'' x 1-3/8''. For anchoring gate handles. This insulated anchor is to be used in conjunction with the fence gate handle. The screw-in design is for T-post gate posts.
Tension bar for chainlink fence. Galvanized steel. Includes nuts. Standard, snug fitting T-post insulator. For fastening electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25.
Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Simple one nail installation made easy with 45 degree front loading feature. Provides long arcing distance protection from wire to post. Raised boss for easy removal of nail with a claw hammer. Four raised ribs imbed themselves into wood post so insulator will not twist. Includes 2 nuts. High strain corner and end insulator. For firmly securing and electrified wire to corner or end posts without losing energy through the post. Made for high tensile, permanent or temporary electric fences. Can withstand the strain of wire at corner or ends of electrified fences.
Black letters on a yellow polypropylene background. Two holes for fastening to fence wire or nailing to wood post. 3 signs. "Warning! Electric Fence" printed in English, French and Spanish languages. Designed to fit steel or 1.25 and 1.33 t-posts. Unbreakable snap-on mounts allow quick and easy installation. Use with all fence wire and poly rope. Two shields prevent arcing from wire to post. Ultraviolet stabilizers resist weathering. Not for use with poly tape or high tensile. Connects 2" polytape to the end insulators to reach all of your fence posts.
Checks current in electric fence with a one-light application. Has a plastic case with 42'' of plastic coated cord. For connecting strands of polytape. Simplifies electrical connections between strands of polytape. Stainless steel plate holds the tape securely and will not corrode. Battery for the following receivers: Deluxe Big Dog Remote Trainer -PDBDT-305, Deluxe Little Dog Remote Trainer - PDBDT-305, Instant Fence Receiver - IF-200, Ultralight Receiver - UL-250, Deluxe Ultralight Receiver - UL-275, Deluxe Big Dog Remote Trainer - DBDT-204, and Deluxe Little Dog Remote Trainer - DLDT-204.
Galvanized hexagonal mesh netting. 90 Pound Breaking Load Limit. Lightweight. Rust-proof. For fastening electrified wire to wood posts without losing energy through the post. Economical insulator with double headed nail. For 9 gauge through 22 gauge high tensile steel wire and aluminum, all polywire (both regular and heavy duty) and polyrope up to 1/4" in diameter. Yellow. Bag of 25.
Use for fastening electrified wire to wood posts without losing energy through the post. Extends wire 2-1/2'' from wooden posts. For 9 gauge through 22 gauge high-tensile steel wire and aluminum wire, all polywire (both regular and heavy duty) and polyrope up to 1/4'' in diameter. Comes with a double headed nail. Yellow. Bag of 25. For insulating corner wood posts that have polytape. Made for all poly tape widths up to 2". For standard T-posts (1.25 and 1.33). Use at corners, ends or T-junctions. Fully insulated. All metal parts are stainless steel. Molded of high density polyethylene with UV inhibitors. For fastening electrified wire to the post without losing energy through the post. Extender insulators extends wire 2" or 5" (depending on item) from post. Fits securely on standard (1.25 or 1.33) studded T-posts. No hardware is needed to put this insulator on a post.
Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Simple one nail installation made easy with 45 degree front loading feature. Provides long arcing distance protection from wire to post. Raised boss for easy removal of nail with a claw hammer. Four raised ribs imbed themselves into wood post so insulator will not twist. For insulating corners, ends or T junctions of T-posts that have polytape. For all polytape widths up to 2" or standard T-posts (1.25 and 1.33). Molded of white high density polyethylene with UV inhibitors. Galvanized for long life and durability. Uniform mesh throughout. Dozens of uses for home, yard, garden and shop.
For fastening electrified wire to posts. Extender T-post insulators allow you to fasten electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25. Galvanized steel. Includes nuts. Designed for easy attachment to t-posts. Coated with Class I galvanizing.
Two holes in top for fastening to fence wire, or for nailing to wood post. Weighs 0.04 pounds each. Made of virgin, high impact polyethylene. Fastens to post with nail, J-bolt or any type of fastener. Raised boss for easy removal of nail with claw hammer. Checks current in electric fence with a one-light application. Has a plastic case with 42" of plastic coated cord.
Insulating grip is soft and flexible with safety flanges for extra shock protection. Unique fastening plate ensures a secure wire connection. Will not break, crack, or chip. Steel components are plated to resist rust. Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Provides long arcing distance protection from wire to post. Self-centering post cavity with spin-on nut will accommodate posts ranging from 1/4'' to 9/16'' diameter. 125 to 145 Breaking Load Limit.
Used to tighten high-tensile wire. Under compression, it automatically feeds into cog reel. Switch off selected electric wires on a fence, such as the lowest live wire when the grass is high, to prevent interference with the fence. Galvanized clip for poly and wood spacers. Use with 3-hole twisting tool No.300.309 (SKU 573-8687) to attach spacer tightly to high tensile wire.
Galvanized for long life and durability. Uniform mesh throughout. Dozens of uses for home, yard, garden and shop. For fastening electrified wire to wood  posts without losing energy through the post. Economical insulator with double-headed nail for wood posts. For 9 gauge thru 22 gauge high-tensile steel wire and aluminum wire, all polywire (both regular and heavy duty), and polyrope up to 1/4" in diameter. Use to insulate wooden corner posts or end posts along wire fences. Durable porcelain and can be used with a variety of wire types, including steel wire, aluminum wire, poly rope and poly tape (not for use with high tensile).
For poly tape (up to 2") electric fence wire. Wood post insulator that can be used at corners, ends or t-junctions. Used with 6" x 8' posts in each single or double brace assembly. Made of 3/8" carbon steel rods and galvanized. For fastening electrified wire to wood posts without losing energy through the post. Extends wire 2-1/2" from wooden posts. For 9 gauge through 22 gauge high tensile steel wire and aluminum wire, all polywire (both regular and heavy duty), and polyrope up to 1/4" in diameter. Comes with a double headed nail.
Galvanized for long life and durability. Uniform mesh throughout. Dozens of uses for home, yard, garden and shop. For use with up to 2" polytape, polywire, polyrope and steel/aluminum wire. Use to protect animals from sharp edged T-post tops. For use on 1.25 and 1.33 T-posts. For use with up to 2" polytape, polywire, polyrope and steel/aluminum wire. Use to protect animals from sharp edged T-post tops. For use on 1.25 and 1.33 T-posts.
Mintcraft GB-NGB006-3L Garden Fences
Hot galvanized before welding. No sharp edges or projections. Use for any type of cage or fence, multiple uses around the home or farm. Can be used in concrete. MintCraft Garden Fence, Deluxe, 23 in Width, 17 in Height, Steel, Matte, Black Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes. Easy installation. Provides long arching distance protection from wire to posts. Yellow.
Has same features as 5" pin but is used with 5" x 8' post in single brace and one each with 5" x 8' post and 4" x 8' post in double brace assembly. Made of 3/8" carbon steel rods and galvanized. Made of hot rolled flat steel formed to fit the in-line strainer No.400-399. Durable paint finish to prevent rust. Fastens electrified wire to round or square post fence without losing energy through the post. Can be used on chain link fence.
Universal Forest 79969 Dinemsions Lattice Caps
Galvanized steel. Includes nuts. Universal Forest U-Cap Moulding, 8 ft Height, Polyethylene, Cedar, Used to Cap Off The Edges Of A Lattice Panel Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 2" width. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. Unbreakable snap-on fastening attachment. Fits 1.25 and 1.33 t-posts.
Universal Forest 48090 Dinemsions Lattice Caps
1/16 amp fuse used in model Nos.EAC5A-FS, SS-750RPX and EAC10M-FS (SS-550X). Used to secure, by crimping, hot wire connections to existing wires. Also for use under gate electric transfer. Fits 12-1/2 to 16 gauge wire. Universal Forest U-Cap Moulding, 8 ft Height, Polyethylene, White, Used to Cap Off The Edges Of A Lattice Panel
Galvanized hexagonal mesh netting. Galvanized for long life and durability. Uniform mesh throughout. Dozens of uses for home, yard, garden and shop. Made of high-density polyethylene, UV stabilized, notched every inch. Attach to wire with spacer clip. 49" long.
For fastening electrified wire to posts without losing energy through the post. Screw-on insulators fits all posts 1/2" in diameter or smaller. Completely arc-proof. Used on chain link fencing. Zinc plated screw hook for 1-5/8" gate.
Galvanized hexagonal mesh netting. Designed for low impedance and standard duty fence controllers. Unbreakable polycarbonate 5,000 pound tensile strength vs 700 pound for porcelain. Will not chip, crack from stress, shortout or rust. Unique built-in wire channel keeps wire centered. Same size and dimension as porcelain corner. Use with any gauge wire or high tensile fences including barbed wire. U.V. protected to resist weathering. Large corner/end post insulator.
Universal Forest 48091 Dimensions Lattice Dividers
Universal Forest H-Channel Divider, 8 ft Height, 1/8 in Width, Polyethylene, White, Used to Join Lattice Panels Together For fastening electrified wire to the post without losing energy through the post. Extender insulators extends wire 2" or 5" (depending on item) from post. Fits securely on standard (1.25 or 1.33) studded T-posts. No hardware is needed to put this insulator on a post. Use for fastening or releasing an electrified wire to or from an electric fence T-post. Holds wire tightly. Release by pulling the pin. For 1.25 and 1.33 T-posts. Yellow. Bag of 25.
Bag of 20 clips. Use to protect animals from sharp-edged T-post tops. For 1.25 and 1.33 T-posts. Accommodates any gauge wire. Yellow. Bag of 10. Use for fastening or releasing an electrified wire to or from an electric fence T-post. Holds wire tightly. Release by pulling the pin. For 1.25 and 1.33 T-posts. Yellow. Bag of 25.
Use to protect small animals from predators. Use at home to prevent small animal entrance and orchard protection. Use for poultry confinement to protect for poultry houses. Simple twisted, asymmetric hexagon shaped netting. Double line wire at top and bottom. High tensile steel wire. Horizontally reinforcement wires every 12 inches. Individually packaged in polyethylene bag for protection. Wires meet the ASTM-A-641 standard. For tightly fastening electrified wire to wood, metal and T-posts without losing energy through the post. Durable and dependable. Tightly fastens to 1.25 or 1.33 T-posts. For 9 gauge through 22 gauge high tensile steel wire and aluminum wire, all polywire (both regular and heavy duty) and polyrope up to 1/4'' in diameter. Molded pin holds wire tightly. Pull pin to release wire. Black. Bag of 25. Hot galvanized before welding. No sharp edges or projections. Use for any type of cage or fence, multiple uses around the home or farm. Can be used in concrete.
Wire this unit push button directly to your gate opener for simple open/close/stop operation from up to 1,000 ft. (304.8 m) away. Uses 16 gauge, multi-stranded, dual conductor. Low voltage wire (RB509). Galvanized hexagonal mesh netting. Corner insulator and tensioner for standard T-posts (1.25 and 1.33 posts). For all polytape widths up to 2''. Use at corners, ends or T junctions. Fully insulated. Molded of white high density polythylene with UV inhibitors. Prevents electrical shorts between the electrified wire and the fence posts.
Ideal when you need just a little more space between the wire and the post. Fits securely on standard (1.25 or 1.33) studded T-posts. Extends electrified wire 5" from the post. No hardware is needed to put this insulator on a post. Holds tape tightly to prevent movement. Molded of heavy-duty polyethylene. Large flange prevents arcing. Tape holder unlocks for easy installation. Extends tape 2" from post. Holds tape tightly to prevent movement. Molded of heavy-duty polyethylene. Large flange prevents arcing. Tape holder unlocks for easy installation. Extends tape 2" from post.
Color Guard 13015330 Wire Flower Fence Color Guard 13015331 Wire Flower Fence
Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 2" width. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. Self centering post cavity with spin-on nut. Fits all posts 1/4" to 9/16". Color Guard Wire Flower Fence, Steel, Color Guard, 25 ft Length, 14 in Height, Galvanized, Green Color Guard Wire Flower Fence, Steel, Color Guard, 25 ft Length, 14 in Height, Galvanized, White
Dependable, strong, made from white vitreous porcelain and coated with a heavy glaze. 1-3/4'' diameter. Use for extending electrified wire 5'' from post. Ideal when you need just a little more space between the wire and the post. Fits securely to standard (1.25 or 1.33) studded T-post. No hardware needed. Yellow. Bag of 25. For fastening electrified wire to posts. Extender T-post insulators allow you to fasten electrified wire to the post without losing energy through the post. Fits securely on standard (1.25 or 1.33) studded T-posts. One molded piece; needs no hardware. Yellow. Bag of 25.
Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 1-1/2" width. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. One nail installation. Raised boss for easy removal of nail with a claw hammer. Four raised ribs imbed themselves into wood post so insulator will not twist. Used to indicate tension of wire. One inch of compression equals 150 pounds of pull. Use one in conjunction with in-line strainer for each leg of fence. Electroplated to deter rust. Used on chain link fencing.
Made of virgin, high impact polyethylene. Maximum protection for horses, show cattle or any livestock from sharp, jagged T-Post top. Fits T-post 133's, 125's and 101's; also fits all size wood posts. For tightly fastening electrified wire to wood, metal and T-posts without losing energy through the post. Durable and dependable. Tightly fastens to 1.25 or 1.33 T-posts. For 9 gauge through 22 gauge high tensile steel wire and aluminum wire, all polywire (both regular and heavy duty) and polyrope up to 1/4'' in diameter. Molded pin holds wire tightly. Pull pin to release wire. Black. Bag of 25. Use for the following PetSafe items: PBC-102 Standard Bark Collar, PBC00-10677 Comfort Fit Bark Control Collar, PBC00-10678 Comfort Fit Delux Bark Control Collar, PDBC-300 Deluxe Bark Collar, PDT00-10603 Yard and Park Trainer, PDT00-10675 Comfort Fit Big Dog Trainer, PDT00-10676 Comfort Fit Small Dog Trainer, PIF-275-19 Wireless Fence Receiver, PIG00-10673 In-Ground Fence with Comfort Fit Receiver, PIG00-10674 Deluxe In-Ground Fence with Comfort Fit Receiver, PIG00-10679 Comfort Fit Programmable Receiver, PIG00-10680 Deluxe Comfort Fit Programmable Receiver, and PUSB Sonic Bark Collar.
For fastening an electrified wire to a post without losing energy through the post. Screw on insulator ensures a tight, secure fit on standard (1.25 or 1.33) studded T-post. Eliminates dislodging in high winds or under heavy loads. Temporarily install flags every 8-10 ft. 11-1/2" Staff -  2-3/4" x 3" Flag. Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 2" width, wire and poly wire. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. Unbreakable snap-on fastening attachment. Fits 1.25 and 1.33 T-posts.
Universal Forest 48705 H-Channel Divider
Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 2" width, wire and poly wire. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. Unbreakable snap-on fastening attachment. Fits 1.25 and 1.33 T-posts. Universal Forest H-Channel Divider, 8 ft Height, 1/8 in Width, Polyethylene, Cedar, Used to Join Lattice Panels Together
Designed specifically for poly tape electric fence wire. Will accommodate all sizes of tape to 2" width. Easy poly tape insertion with snap shut. Latches securely but quickly opens to take down and move poly tape. Tape will float in all directions but cannot come out. No moving parts or latches to insert or break. Self centering post cavity with spin-on nut. Fits all posts 1/4" to 9/16". Galvanized for long life and durability. Uniform mesh throughout. Dozens of uses for home, yard, garden and shop. Use for extending wire 5" from wooden posts. Fastens electrified wire to wooden post without losing energy through the post. For 9 gauge through 22 gauge high tensile steel wire and aluminum wire, all polywire (both regular and heavy duty) and polyrope up to 1/4" in diameter. Yellow. Bag of 25.
Use to protect small animals from predators. Use at home to prevent small animal entrance and orchard protection. Use for poultry confinement to protect for poultry houses. Simple twisted, asymmetric hexagon shaped netting. Double line wire at top and bottom. High tensile steel wire. Horizontally reinforcement wires every 12 inches. Individually packaged in polyethylene bag for protection. Wires meet the ASTM-A-641 standard. Low tensile for greater flexibility. NOTE: 80 R 1/4 MILE - 160 R 1/2 MILE. For firmly fastening electrified wire to wood posts without losing energy through the post. For 9 gauge through 22 gauge high tensile steel wire and aluminum wire, all polywire (both regular and heavy duty) and polyrope up to 1/4" in diameter. Black. Bag of 25.
Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Easy installation with 45 degree front loading feature. Provides long arcing distance protection from wire to post. Features Red Snap'r unbreakable, snap-on/snap-off fastening attachment which accommodates standard size 1.25 and 1.33 t-posts. Galvanized for long life and durability. Uniform mesh throughout. Dozens of uses for home, yard, garden and shop. Made of virgin, high impact polyethylene. Designed to eliminate moisture collection. Large wire channel accommodates all wire sizes including the heaviest barbed wire, the lightest gauge smooth wire and Red Snap'r electric fence wire. Simple one nail installation made easy with 45 degree front loading feature. Provides long arcing distance protection from wire to post. Raised boss for easy removal of nail with a claw hammer. Four raised ribs imbed themselves into wood post so insulator will not twist.
   
 
1 2 3 4