Home > LAWN CARE > WATERING
Sort By:
1 2 3 4
WaterMaster 37069 Cut-Off Riser Extension WaterMaster 37165 Flexible Riser Coupling WaterMaster 37017 Cut-Off Riser Extension
Molded, black, high-grade polyethylene construction. Cut to desired length. Not for use under continuous pressure. Sharp spiral barbs permit hand insertion and eliminates the need for clamps or glue. Molded high-impact plastic construction for long life. For use with 1/2" riser flex pipe. Molded, black, high-grade polyethylene construction. Use to raise sprinkler heads above grass level. Cut to desired length. Not for use under continuous pressure.
WaterMaster 37160 Flexible Riser Adapter WaterMaster 37159 90 deg Riser Elbow Fitting WaterMaster 37162 90 deg Flexible Riser Elbow
Sharp spiral barbs permit hand insertion and eliminates the need for clamps or glue. Molded high-impact plastic construction for long life. For use with 1/2" riser flex pipe. Sharp spiral barbs permit hand insertion and eliminates the need for clamps or glue. Molded high-impact plastic construction for long life. For use with 1/2" riser flex pipe. Sharp spiral barbs permit hand insertion and eliminates the need for clamps or glue. Molded high-impact plastic construction for long life. For use with 1/2" riser flex pipe.
WaterMaster 37166 Flexible Riser Tee Orbit 37169 Cut-Off Riser WaterMaster 37114 Cut-Off Riser
Sharp spiral barbs permit hand insertion and eliminates the need for clamps or glue. Molded high-impact plastic construction for long life. For use with 1/2" riser flex pipe. Molded, black, high-grade polyethylene construction. Cut to desired length. Not for use under continuous pressure. Molded, black, high-grade polyethylene construction. Cut to desired length. Not for use under continuous pressure.
WaterMaster 54009 Shrub Head Sprinkler WaterMaster 37113 Cut-Off Riser Genova 34505 Riser Extension
Plastic with durable plastic insert nozzle. Filter prevents debris clogs. 1/2" FNPT inlet. Molded, black, high-grade polyethylene construction. Cut to desired length. Not for use under continuous pressure. Used to extend sprinkler risers. May be used in initial installation or for replacement purposes. PTFE thread tape is recommended for threaded joints.
Rainbird RISER-1PK Preassembled Riser Stake Rainbird 1300 Flower Bubbler Orbit 54229 Pop-Up Spring Loaded Sprinkler Head
Preassembled riser and stake for use with Rain Bird 10-32 threaded emission devices. Designed for tree, shrub and flower areas. Full circle pattern only. Flow adjustment screw regulates water flow for spacing 1' to 3' apart. Filter screen included. 1/2'' female pipe connection. Discharges 1.4 GPM at 20 PSI. Spring-Loaded pop-up economy head with plastic nozzle for medium size yards. Space 10' to 15' apart. Wiper seal keeps out sand and grit. Stainless steel retraction spring. 1/2" MNPT connection.
Orbit 54230 Pop-Up Spring Loaded Sprinkler Head Orbit 54228 Pop-Up Spring Loaded Sprinkler Head Mintcraft GM2073L Garden Hose Washers
Spring-Loaded pop-up economy head with plastic nozzle for medium size yards. Space 10' to 15' apart. Wiper seal keeps out sand and grit. Stainless steel retraction spring. 1/2" MNPT connection. Spring-Loaded pop-up economy head with plastic nozzle for medium size yards. Space 10' to 15' apart. Wiper seal keeps out sand and grit. Stainless steel retraction spring. 1/2" MNPT connection. 12 washers tear off sheet for ease.
Stretch 'N Lock S5600UB Tubing Coupling CONNECT MALE QUICK POLY 3/4IN Mintcraft GM2043L Garden Hose Filter Washers
Unique design accommodates a range of hose diameters and will not blow off hose with water pressures up to 100 PSI.  For use with 1/2" - .710" (.520" - .620" I.D) hose. 3/4" plastic male thread quick connector. For speedy connection of hose and nozzle. 12-piece - filter feature keeps nozzle free from clogs.
Mintcraft GC520 Garden Hose Quick Connectors Raindrip R645CT Double Duty Double End Hole Plug Raindrip R325CT Hose Swivel Adapter With Filter Washer
3/4" plastic female thread quick connector. For speedy connection of hose and nozzle. Double-ended, double-duty plugs seal either large or small holes in 1/2", 5/8" or .710" hose. For use with 1/4" (.160" I.D.) tube only. Connects 1/4" tubing to faucet or other 3/4" male hose thread. Includes filter washer.
Raindrip R302CT Tube End Clamp Raindrip R314CT Tubing Elbow Rainbird EFC25-1PK Tubing Coupling
Used to shut off the end of 1/4" tubing. Removes easily. Double barbed design allows water pressure up to 50 PSI. Compression fitting for use with all 1/2'' drip tubing brands.
Gilmour 01M Large Garden Hose Coupling Gilmour 05M Small Garden Hose Coupling Easy Fit EFE25-1PK Non-Threaded Tubing Elbow
Leakproof, rustproof and reusable. Premium nylon construction. Clamp design resists impact. Non-corroding stainless steel screws will not strip when tightened. Fits rubber or plastic hoses. Leakproof, rustproof and reusable. Premium nylon construction. Clamp design resists impact. Non-corroding stainless steel screws will not strip when tightened. Fits rubber or plastic hoses. Compression fitting for use with all 1/2'' drip tubing brands.
Rainbird EC50-2PK End Closure Rainbird A17-F Shrubbery Spray Head Sprinkler Rainbird A17-H Shrubbery Spray Head Sprinkler
1/2" end closure for use with 1/2" tubing to allow flushing and draining of system. Mounts above ground on a riser tall enough to clear shrubs and tall plantings. Adjustment screw regulates distance throw for spacing 6' to 15' apart. Matched flow rate nozzle assures uniform watering when different patterns are mixed on the same circuit. The shrubbery spray head with the patented adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. No tools needed. Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles. 1/2" (13mm) female pipe connection. Mounts above ground on a riser tall enough to clear shrubs and tall plantings. Adjustment screw regulates distance throw for spacing 6' to 15' apart. Matched flow rate nozzle assures uniform watering when different patterns are mixed on the same circuit. The shrubbery spray head with the patented adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. No tools needed. Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles. 1/2" (13mm) female pipe connection.
Rainbird A17-Q Shrubbery Spray Head Sprinkler Gilmour 06WJ Jet Water Nozzle Gilmour 01F Large Garden Hose Coupling
Mounts above ground on a riser tall enough to clear shrubs and tall plantings. Adjustment screw regulates distance throw for spacing 6' to 15' apart. Matched flow rate nozzle assures uniform watering when different patterns are mixed on the same circuit. The shrubbery spray head with the patented adjustable pattern nozzle waters any part of a circle from 0 degrees to 360 degrees. Easy to adjust pattern for complex watering needs. No tools needed. Distributes water evenly regardless of pattern set and is compatible with other Rain Bird match flow rate nozzles. 1/2" (13mm) female pipe connection. Durable, rustproof poly construction. Sprays concentrated jet stream. Attaches to threaded front nozzles or hose ends. Built-in flow control. Impact resistant. Not recommended for hot water over 140 degrees Fahrenheit. Leakproof, rustproof and reusable. Premium construction for maximum strength and durability. Clamp design resists impact. Non-corroding stainless steel screws will not strip when tightened. Fits rubber or plastic hoses.
Rainbird 12DSH Dual Half Circle Spray Nozzle Rainbird 15 AP Adjustable Pattern Sprinkler Nozzle Rainbird 12QC1 Quarter Circle Sprinkler Nozzle
Reduce watering run times and conserve water. Dual orifice design delivers close-in watering and even water distribution across the entire watering area. The spray patterns from two orifices form a continuous water stream closer to the sprinkler head, helping to eliminate dry brown spots. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040. Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 15 foot spacing at 30 PSI. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040. Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 9 to 12 foot spacing at 30 PSI. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040.
Rainbird 8-H-C1 Half Circle Spray Head Nozzle Rainbird 8-F-C1 Full Circle Spray Head Nozzle Sure-Pop 600 Pop-Up Spray Head Sprinkler
Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 1/2" female pipe connection. 5 to 8 foot spacing at 30 PSI. For use with 1800, SP40, SP25 and A17 series. Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 1/2" female pipe connection. 5 to 8 foot spacing at 30 PSI. For use with 1800, SP40, SP25 and A17 series. Patented stem seal keeps debris out, prevents pressure loss from flow-by and ensures pop-up at low water pressure. This pop-up sprinkler has a 1/2 inch female threaded bottom inlet.
Sure-Pop 600 Pop-Up Spray Head Sprinkler Sure-Pop 600 Pop-Up Spray Head Sprinkler Rainbird 12DSF Dual Full Circle Spray Nozzle
Patented stem seal keeps debris out, prevents pressure loss from flow-by and ensures pop-up at low water pressure. This pop-up sprinkler has a 1/2 inch female threaded bottom inlet. Patented stem seal keeps debris out, prevents pressure loss from flow-by and ensures pop-up at low water pressure. This pop-up sprinkler has a 1/2 inch female threaded bottom inlet. Reduce watering run times and conserve water. Dual orifice design delivers close-in watering and even water distribution across the entire watering area. The spray patterns from two orifices form a continuous water stream closer to the sprinkler head, helping to eliminate dry brown spots. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040.
Rainbird MPR 15 Side Strip Pattern Spray Nozzle Rainbird 4252ZNLPK Nozzle Pack Raindrip R307CT Tube to Hose Tee
Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 15 foot spacing at 30 PSI. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040. Easy arc and adjustment from the top requiring only a flat blade screwdriver. Professional rear drive is durable, reliable and water lubricated. Superior rain curtain technology, unique in the industry, for maximum water coverage. Reversing full and part circle rotation from 40 degrees to 360 degrees arc adjustment. Multi-function wiper seals that protect the internals from debris and assures positive pop-up and retraction over the life of the rotor. 3/4'' inlet. Spray distance from 26 to 38 feet. Double barbed design allows use with higher water pressures. For use with 1/4" (.160 - .197" I.D.) tube only. Creates a 1/4" branch from a 1/4" tube, or two 1/4" branches from a 1/2" hose. For water pressures up to 50 PSI.
Rainbird 8-Q-C1 Quarter Circle Spray Head Nozzle Rainbird 32SANNZLPK Adjustable Spray Nozzle Pack Rainbird 15-EST-C1 End Strip Pop Up Replacement Sprinkler Nozzle
Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 1/2" female pipe connection. 5 to 8 foot spacing at 30 PSI. For use with 1800, SP40, SP25 and A17 series. Nozzle tree includes various nozzle sizes: (1) .75, (1) 1.0, (1) 1.5, (1) 2.0, (1) 3.0 and (1) 4.0 size. Can be used with Rain Bird 32SA rotor, 32SA Shrub series rotors and 3500 series rotors. Designed to save water with even and efficient coverage. Changing nozzles can help even out the amount of water being sprayed between rotors that are set for different patterns. Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 15 foot spacing at 30 PSI. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040.
Gilmour 501 Pistol Grip Spray Nozzle Gilmour 29QM Quick Hose Coupler Rainbird 12HC1 Half Circle Sprinkler Nozzle
Mid-size, durable, rustproof poly body and valve assembly with fixed nut. Hold open clip. Self-adjusting for lifetime leak-free seal. Easily attaches to nozzle or sprinkler for quick connection to hose. Includes two male hose end adapters. Durable, rustproof polymer construction. Interchangeable with most polymer quick connector systems. Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 9 to 12 foot spacing at 30 PSI. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040.
Gilmour 02FW Filter Washer Rainbird Matched Precipitation Rate 15 Half Circle Spray Head Nozzle Rainbird 12FC1 Full Circle Sprinkler Nozzle
Molded-in metal screen fits all hose couplings. Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 15 foot spacing at 30 PSI. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040. Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 9 to 12 foot spacing at 30 PSI. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040.
Rainbird 15CSTC1 Center Strip Spray Nozzle Gilmour 04HCC Hose Cap WaterMaster 53361 Hose to Pipe Adapter
Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 15 foot spacing at 30 PSI. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040. High impact polymer construction. Fits any standard male hose end. Hose-to-pipe fittings. Garden hose thread and pipe thread connections.
WaterMaster 53366 Hose to Pipe Swivel Adapter Gilmour 39QM Quick Faucet Hose Connector Rainbird 12APC1 Adjustable Spray Nozzle
Hose-to-pipe fittings. Garden hose thread and pipe thread connections. Male faucet connector easily threads onto faucet. Durable, rustproof polymer construction. Interchangeable with most polymer quick connector systems. 1 per card. Nozzle distributes water evenly regardless of pattern and is compatible with other Rain Bird matched flow rate nozzles. Adjustable flow and radius. Stainless steel adjustment screw. Filter screen. 9 to 12 foot spacing at 30 PSI. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040.
Rainbird 18APC1 Adjustable Spray Head Nozzle Orbit 5400 Pop Up Spring Loaded Sprinkler Head WaterMaster 53360 Hose to Pipe Swivel Adapter
Matched precipitation rate (MPR) nozzle. 15-18 ft. range. Fits Rain Bird 1800, 1200 and Sure Pop spray heads. Spring-Loaded pop-up head with adjustable nozzle for medium size yards. Space 10' to 15' apart. 25-360 degree adjustable nozzle. Molded, pressure-activated wiper seal prevents leaks and seals the internals from debris. Ratchet feature allows easy spray direction adjustment. 1/2" MNPT inlet. Hose-to-pipe fittings. Garden hose thread and pipe thread connections.
Rainbird 12DSQ Dual Quarter Circle Spray Nozzle Gilmour 01RW Hose Washer Gilmour 05F Small Garden Hose Coupling
Reduce watering run times and conserve water. Dual orifice design delivers close-in watering and even water distribution across the entire watering area. The spray patterns from two orifices form a continuous water stream closer to the sprinkler head, helping to eliminate dry brown spots. For use with 1800, SP40, SP25 Series, 1240 Series and Optima lines, 7025 and 7040. Gilmour Hose Washer, Heavy Duty, Rubber, Gilmour, 3/4 in, Red Leakproof, rustproof and reusable. Premium construction for maximum strength and durability. Clamp design resists impact. Non-corroding stainless steel screws will not strip when tightened. Fits rubber or plastic hoses.
Mintcraft GC532-23L Garden Hose Menders Mintcraft GC531-23L Garden Hose Couplings Mintcraft GC530-23L Garden Hose End Repair
Plastic garden hose mender. Plastic garden hose coupling. Plastic garden hose coupling.
Mintcraft GC5313L Garden Hose Couplings Mintcraft GC5303L Garden Hose End Repair Mintcraft GC5323L Garden Hose Menders
Plastic garden hose coupling. Plastic garden hose coupling. Plastic garden hose mender.
Mintcraft GC540*23L Garden Hose Tap Adapters Mintcraft GC5143L Garden Hose Shut-Offs WaterMaster 53362 Hose to Pipe Adapter
3/4" plastic female thread tap adapter. In use with 3/4" quick connector for speedy connection of hose and nozzle. The valve adjusts water flow from fully open to completely shut off. Hose-to-pipe fittings. Garden hose thread and pipe thread connections.
Raindrip R320CT Hose Swivel Adapter With Filter Washer WaterMaster 53365 Hose to Pipe Swivel Adapter Raindrip R390CT Tube Support Clamp
3/4" hose thread swivel x 1/2" compression adaptor connects 1/2" poly hose to faucet or other 3/4" male hose thread. Includes filter washer. For use with 1/2" (.620" - .630" O.D.) hose only. Green compression ring. Hose-to-pipe fittings. Garden hose thread and pipe thread connection. Black poly clamps molded to fit 1/4" tubing. Includes pre-inserted nail.
Mintcraft GC545-2 Garden Hose Tap Adapters Raindrip R312CT Hose Connector Raindrip R380CT Support Stake
3/4" plastic male thread tap adapter. In use with 3/4" quick connector for speedy connection of hose and nozzle. Double barbed design, allows use with higher pressures, join or connect two lengths of line. 1/4" connector used with 1/4" (.160 - .197" I.D.) tube only. Double barb design allows water pressures up to 50 PSI. 4" plastic stakes hold 1/4" tubing in place next to plants.
WaterMaster 53364 Hose to Pipe Swivel Adapter Mintcraft GC5113L Garden Hose Connectors WaterMaster 53363 Hose to Pipe Swivel Adapter
Hose-to-pipe fittings. Garden hose thread and pipe thread connection. Garden hose connector, "Y" with shut-off. Hose-to-pipe fittings. Garden hose thread and pipe thread connections.
Raindrip R381CT Support Stake Rainbird SA-5 Sprinkler Swing Assembly Orbit 51240 Drain Valve
Heavy-duty plastic stakes hold 1/4" lines in place. Swing motion allows for easy and accurate depth setting of the sprinkler head while allowing parallel connection of sprinkler head to main irrigation line. Drains sprinkler lines when water is turned off. Helps prevent freezing of sprinkler lines.
Rainbird Easy Fit EFT25-1PK Non-Threaded Tubing Tee Raindrip R303CT Hose End Plug With Cap Raindrip R321CT Tube to Pipe Swivel Adapter With Washer
Universal compression fitting tee for use with all 1/2'' drip tubing brands. Closes ends of 1/2" (.620"-. 630" O.D.)  poly hose when frequent flushing is necessary. Green compression ring. Made from ABS. For water pressure up to 60 PSI. 3/4" Pipe thread swivel x 1/2" compression adaptor connects 1/2" poly hose to 3/4" male pipe thread. Washer included. For use with 1/2" (.620" - .630" O.D.) hose only. Green compression ring.
Gilmour 474FARM Pistol Grip Spray Nozzle With Fixed Nut Orbit 400 Pop-Up Spring Loaded Sprinkler Orbit 400 Pop-Up Spring Loaded Sprinkler
Durable, rustproof, full size poly body. Poly valve assembly with fixed nut. Male hose threaded front for attaching accessories. Hold-open clip for continuous spraying. Self-adjusting lifetime leakproof seal. Spring-Loaded pop-up head with flow adjustable plastic nozzle for medium size yards. Space 10' to 15' apart. Wiper seal keeps out sand and grit. Stainless steel retraction spring. 1/2" MNPT connection. Spring-Loaded pop-up head with flow adjustable plastic nozzle for medium size yards. Space 10' to 15' apart. Wiper seal keeps out sand and grit. Stainless steel retraction spring. 1/2" MNPT connection.
Raindrip R301CT Hose End Clamp Rainbird SA-65 Sprinkler Swing Assembly WASHER VINYL HOSE
WASHER VINYL HOSE 10PK
Our Price : $2.99
Used to shut off the end of 1/2" Rain Drip poly hose. Removes easily. Swing motion allows for easy and accurate depth setting of the sprinkler head while allowing parallel connection of sprinkler head to main irrigation line. 10 washers tear off sheet for ease.
Rainbird BC50-4PK Hose Coupling Rainbird MSF-2PK Micro Spray Rainbird MSH-2PK Micro Spray
Connect 2 pieces of 1/2" tubing. Ideal for shrub plantings, trees, containers and flower beds. Ideal for shrub plantings, trees, containers and flower beds.
Rainbird BE50-4PK Drip Watering Non-Threaded Hose Elbow Rainbird BT50-4PK Non-Threaded Tubing Tee Gilmour 306UPC Ring Sprinkler
Connect 2 pieces of 1/2" tubing in an "L" shape. Connect 3 pieces of 1/2" tubing in a "T" shape. High impact polymer construction. Three rows of outlet holes for even and gentle watering. Covers up to 900 sq.ft.
Gilmour 05HM Small Hose Mender Orbit 54190 Spinning Sprinkler Head Rainbird SA-75 Sprinkler Swing Assembly
Premium construction for maximum strength and durability. Impact resistant clamp design. Non-corroding high grade stainless steel screws will not strip when tightened. For rubber or plastic hose. Leak-proof, reusable. 1/2'' FNPT inlet. 40' diameter coverage. Ideal for gardens and flower beds. Durable plastic design. Swing motion allows for easy and accurate depth setting of the sprinkler head while allowing parallel connection of sprinkler head to main irrigation line.
Raindrip R310CT Tubing Coupling Gilmour 428 Twist Nozzle Rainbird TS25-10PK Tubing Stake With Bug Guard
Gilmour 428 Twist Nozzle
Our Price : $3.49
Join or connect two lengths hose. Made from ABS. For water pressure up to 60 PSI. High impact, rustproof poly construction. Two O-ring seals for leakproof operation. Precise tip angle eliminates side spray. Not recommended for hot water use. Stake 1/4" tubing at desired locations or secure spot watering emitters. Place bug guard at end to prevent bugs and debris from clogging tubing.
Sure-Pop 600 Pop-Up Spray Head Sprinkler Gilmour 01HM Large Hose Mender Gilmour 07V Single Hose Shut-Off Valve
Distributes water evenly regardless of pattern set and is compatible with other RainBird matched flow rate nozzles. Adjustable Pattern Nozzle waters any circle from 0 to 330 degrees. Easy to adjust pattern for complex watering needs-no tools needed. Full 2-1/2" pop-up clears tall grass. Patented stem seal keeps debris out, prevents pressure loss from flow-by and ensures pop-up at low water pressure. 4-1/2'' overall height. Premium construction for maximum strength and durability. Impact resistant clamp design. Non-corroding high grade stainless steel screws will not strip when tightened. For rubber or plastic hose. Leak-proof, reusable. Non-corroding, durable nylon construction. Shut-off valve controls water flow. Cap type valve handle resists breakage. Not recommended for hot water use.
Raindrip R384CT Drip Watering Stake With Riser WaterMaster 37320 Multi-Flexible Sprinkler Riser Toolbasix DY601 Impact Sprinkler Heads
13" stake with adjustable 8" rigid riser for use with low-flow sprinklers and sprayheads with 10-32 NFT inlets. Screw sprinkler/sprayer into the rigid riser moving it up or down to water above plants. Constructed of high-density polyethylene and polypropylene. Flexible tubing allows for bending without breaking. Ideal for placing heads in hard-to-reach areas. Pulsating sprinkler head adjusts from partial to full circle.
Gilmour 09QSR-BAG Quick-Connect Seal Mintcraft GC5043L Garden Hose Shut-Offs Rainbird TP25-10PK Goof Non-Threaded Tubing Plug
For 09QC series female connector. Heavy-duty rubber construction. Three seals per package. The valve adjusts water flow from fully open to completely shut off. Use as an end closure for 1/4" tubing, or as a side plug for 1/2" tubing.
Rainbird BC25-10PK Hose Coupling Raindrip R630CT Hole Punch With Hole Plug Mintcraft PMB-064 Garden Hose Connectors
Connect 2 pieces of 1/4" tubing or tap into the side of 1/2" tubing. Designed for comfortable use, punches holes in 1/2", 5/8" or .710" hose to insert PC drippers or 1/4" fittings. Handle has socket for installing and removing Micro spray jets. Card includes hole plugs. Garden hose connector, "Y", cast metal.
Toolbasix GN37070 Garden Hose Nozzles Rainbird BT25-10PK Non-Threaded Tubing Tee Raindrip R315CT Tubing Elbow With Green Compression Ring
Water saving shut off valve.  Zinc spike for easy mounting. Connect 3 pieces of 1/4" tubing in a "T" shape or tap into the side of 1/2" tubing. For water pressure up to 60 PSI. Ends are color coded for easy size identification.
Mintcraft GB92103L Garden Hose Nozzles Toolbasix GA7813L Garden Hose Nozzles WaterMaster 37321 Multi-Flexible Sprinkler Riser
High-impact sprayer, has powerful jet spray for washing driveway, walkways and siding. 5-1/2" plastic nozzle and trigger threaded front for attaching accessories. Flexible tubing allows for bending without breaking. Ideal for placing heads in hard-to-reach areas.
Raindrip R156CT Adjustable Stream Spray Bubbler Hard Top 5400 Pop Up Spring Loaded Sprinkler Head Raindrip 157005B Adjustable Stream Spray Bubbler
Convert existing 1/2" underground sprinkler systems to low flow watering where a drip circuit can't be set up. Available in stream spray with a maximum spray diameter of 3' at 30 PSI or for finer water droplets, a fan spray, with spray diameter up to 13' at 30 PSI.  Adjustable bubbler rotates easily to preferred water flow, from full coverage for shrubs and large potted trees to shut-off position. Tough metal Cap for durability. Ideal for yards bordering sidewalks and driveways where frequent contact with tires or lawn equipment are common. For medium size yards, spaced 10' to 15' apart. 25 - 360 degree nozzle with flow adjustment screw. Molded, pressure-activated wiper seal prevents leaks and seals the internals from debris. Heavy-Duty stainless steel spring assures complete sprinkler retraction. Ratchet feature allows easy spray direction adjustment. Drop-in filter to prevent plugging. 1/2" MNPT connection. Drip watering bubbler. Adjustable bubbler rotates easily to preferred water flow - from full coverage for shrubs and large potted trees to shut-off position.
Raindrip R153CT Fan Spray Bubbler CONN HOSE GNECK SWIVEL ZINC   Orbit 400 Pop-Up Spring Loaded Sprinkler
Convert existing 1/2" underground sprinkler systems to low flow watering where a drip circuit can't be set up.  Available in stream spray with a maximum spray diameter of 3' at 30 PSI or for finer water droplets, a fan spray with spray diameter up to 13' at 30 PSI. Adjustable bubbler rotates easily to preferred water flow, from full coverage for shrubs and large potted trees to shut-off position. Helps prevent hose from kinking at the faucet. Reduces stress on hose coupling. Fits standard house and water hose end couplings. Spring-Loaded pop-up head with flow adjustable plastic nozzle for medium size yards. Space 10' to 15' apart. Wiper seal keeps out sand and grit. Stainless steel retraction spring. 1/2" MNPT connection.
Toolbasix GS84903L Lawn Sprinklers Raindrip R612CT Double Barbed Value Mintcraft GS95113L Lawn Sprinklers
Stable high-impact plastic base. 6 dial settings with different watering patterns. Adjust, balances or shuts off water flow to watering circuits, zones or plants. For use with 1/4" (.160" I.D.) vinyl tubing only. Double barbed design allows water pressure up to 50 PSI. Metal construction. Chrome plated surface finish. Works well in small areas.
Mintcraft GB9610 Garden Hose Quick Connectors Rainbird 1800 Pop-Up Spray Head Sprinkler Rainbird 1800 Pop-Up Spray Head Sprinkler
Solid brass garden hose quick connector. 3/4" male threads. Full 4" pop-up clearance for tall grass and other obstacles. Heavy-duty stainless steel spring for positive retraction. Matched Flow Rate nozzles assure uniform watering. Filter screen beneath nozzle prevents clogging, removable for easy cleaning. Stem seal keeps grit out and assures positive pop-up even with low water pressure. Patented pressure-activated wiper seal prevents flow-by and assures positive retraction. Adjustable distance of throw for spacing from 6' to 15' apart. 1/2" female inlet. 6'' overall height. Operating pressure from 15 to 30 PSI. For use in backyards and parks. Patented pressure activated co-molded wiper seal prevents water leakage for long life. Heavy duty stainless steel spring assures flush retraction. Multiple pop-up heights for maximum design flexibility. U.V. resistant plastic reduces fading. Operates efficiently at low water pressure. 1/2'' inlet size.
Mintcraft DY3202 Garden Hose Guide SPRINKLER RING YELLOW         Raindrip R616CT Y Connector With Dual Shut-Off
Plastic hose guide with metal spike. Allows pulling of garden hose around shrubs and mulch beds. High-impact plastic construction. 30 feet maximum coverage. Converts one faucet to two separately controllable outlets. 3/4" female hose thread inlet x 3/4" male hose thread outlets.
CONN HOSE LF 3/4MHX1/2MP      Gilmour 896 Fan Sprinkler Mintcraft GS9512 Lawn Sprinklers
CONN HOSE LF 3/4MHX1/2MP
Our Price : $4.59
Gilmour 896 Fan Sprinkler
Our Price : $4.79
Male garden hose connector. 3/4" male garden hose thread x 1/2" male iron pipe thread. All metal construction. 12'' ground spike. Sprays up to 20'. Metal construction. Chrome plated surface finish. Works well in small areas.
Gilmour 29QF Quick Garden Hose Coupling With Shut-Off SPRINKLER SQUARE PATTERN      Raindrip R305CT Tubing Tee
Female hose end connector with built-in water shut-off valve. Easily attaches hose to nozzle, sprinkler or other hose end accessories. Durable, rustproof polymer construction. Interchangeable with most poly quick coupler systems. Metal construction. Chrome plated surface finish. Works well in small areas. Compression tees made from ABS. For water pressure up to 60 PSI.
   
 
1 2 3 4