|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
|
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
|
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inexpensive, disposable test caps for pressure testing ABS or PVC with up to 10 pounds pressure. Cap is solvent welded inside open pipe end. After test the center is knocked out and thrown away. Made of ABS.
|
Contractor Pack - Bagged
|
Protects pipes and wiring installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs. Includes nails for secure fit.
|
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs. Includes nails for secure fit.
|
Galvanized steel two-hole strap to secure pipe. Two holes for use with nails or screws to ensure stable fit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable polypropylene standard clamp. Split, ribbed design to allow for expansion and contraction after installation. Flanged with holes for secure installation.
|
Protects pipes and wiring installation.
|
Galvanized steel two-hole strap to secure pipe. Two holes for use with nails or screws to ensure stable fit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ABS plastic J-hook to be used for hanging pipe from joists, rafters, or studs. Includes nails for secure fit.
|
Durable polypropylene standard clamp. Split, ribbed design to allow for expansion and contraction after installation. Flanged with holes for secure installation.
|
Copper plated two-hole strap to secure pipe. Corrosion resistant, for indoor & outdoor use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Protects pipes and wiring installation.
|
Galvanized steel two-hole strap to secure pipe. Two holes for use with nails or screws to ensure stable fit.
|
Galvanized steel for IPS pipe. For use with all thread rod up to 3/8". Works as a suspension style hanger.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copper plated two-hole strap to secure pipe. Corrosion resistant, for indoor & outdoor use.
|
Contractor Pack - Bagged
|
Galvanized steel two-hole strap to secure pipe. Two holes for use with nails or screws to ensure stable fit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic strapping with perforated holes to be used for securing any size pipe. Allows custom straps to be fabricated. Easy to cut and lightweight.
|
Durable polypropylene half clamp provides an easy and efficient way to secure pipes. Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction.
|
Durable polypropylene full clamp provides an easy and efficient way to secure pipes. Clamp grips, insulates, and isolates the pipe from the mounting surface. Preloaded barbed nails allow pipe to secured in any direction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable polypropylene full clamp provides an easy and efficient way to secure pipes. Clamp grips, insulates, and isolates the pipe from the mounting surface. Preloaded barbed nails allow pipe to secured in any direction.
|
Copper plated two-hole strap to secure pipe. Corrosion resistant, for indoor & outdoor use.
|
B&K Nail, 1-1/4 in, Copper, Plated Steel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable polypropylene half clamp provides an easy and efficient way to secure pipes. Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction.
|
Galvanized steel 24 gauge strapping with perforated holes to be used for securing any size pipe. Allows custom straps to be fabricated.
|
Copper plated two-hole strap to secure pipe. Corrosion resistant, for indoor & outdoor use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contractor Pack - Bagged
|
Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist.
|
Galvanized malleable iron top plate connector used to connect split ring hangers with a 3/8" all thread rod.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Durable polypropylene half clamp provides an easy and efficient way to secure pipes. Clamp snaps around pipe and preloaded barbed nails allow pipe to secured in any direction.
|
Durable polypropylene pipe insulator. V-shaped notch to easily snap onto pipe. Flanged with holes for secure installation. Eliminates noise and vibration.
|
Durable polypropylene pipe insulator. V-shaped notch to easily snap onto pipe. Flanged with holes for secure installation. Eliminates noise and vibration.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized steel 28 gauge strapping with perforated holes to be used for securing any size pipe. Allows custom straps to be fabricated. Lightweight steel.
|
Copper plated two-hole strap to secure pipe. Corrosion resistant, for indoor & outdoor use.
|
B & K Ring Hanger, Split, 1/2 in Opening, Malleable Iron, Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
B & K Ring Hanger, Split, 3/4 in Opening, Malleable Iron, Galvanized
|
Galvanized steel two-hole strap to secure pipe. Two holes for use with nails or screws to ensure stable fit.
|
Durable polypropylene standard clamp. Split, ribbed design to allow for expansion and contraction after installation. Flanged with holes for secure installation.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized steel two-hole strap to secure pipe. Two holes for use with nails or screws to ensure stable fit.
|
Provides quick nail support.
|
Galvanized steel two-hole strap to secure pipe. Two holes for use with nails or screws to ensure stable fit.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized malleable iron universal beam clamp used to attach hanger rod to top or bottom of a beam or joist.
|
Plastic strapping with perforated holes to be used for securing any size pipe. Allows custom straps to be fabricated. Easy to cut and lightweight.
|
Durable polypropylene full clamp provides an easy and efficient way to secure pipes. Clamp grips, insulates, and isolates the pipe from the mounting surface. Preloaded barbed nails allow pipe to secured in any direction.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vinyl coated galvanized steel DWV pipe hanger. Locking screw keeps pipe secure. Keyhole design provides faster installation. Perforated holes allow for several hanging lengths.
|
Galvanized steel for IPS pipe. For use with all thread rod up to 3/8". Works as a suspension style hanger.
|
Copper plated two-hole strap to secure pipe. Corrosion resistant, for indoor & outdoor use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Contractor Pack - Bagged
|
Provides quick nail support.
|
B & K Ring Hanger, Split, 1 in Opening, Malleable Iron, Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Protects pipes and wiring installation.
|
|
Galvanized finish. 3/4" x 10'
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized steel water pipe supply hook. Nail point ends for easy drive-in use. Vinyl coated.
|
Galvanized steel water pipe supply hook. Nail point ends for easy drive-in use. Vinyl coated.
|
Galvanized steel one-hole strap to secure pipe. One hole for use with nails or screws to ensure stable fit in tight areas.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Vinyl coated galvanized steel DWV pipe hanger. Locking screw keeps pipe secure. Keyhole design provides faster installation. Perforated holes allow for several hanging lengths.
|
Galvanized steel for IPS pipe. For use with all thread rod up to 3/8". Works as a suspension style hanger.
|
Galvanized steel water pipe supply hook. Nail point ends for easy drive-in use. Vinyl coated.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized steel one-hole strap to secure pipe. One hole for use with nails or screws to ensure stable fit in tight areas.
|
|
Vinyl coated galvanized steel DWV pipe hanger. Locking screw keeps pipe secure. Keyhole design provides faster installation. Perforated holes allow for several hanging lengths.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Galvanized steel for IPS pipe. For use with all thread rod up to 3/8". Works as a suspension style hanger.
|
Copper plated water pipe supply hook. Corrosion resistant, for indoor & outdoor use. Nail point ends for easy drive-in use.
|
Copper plated water pipe supply hook. Corrosion resistant, for indoor & outdoor use. Nail point ends for easy drive-in use.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copper plated two-hole strap to secure pipe. Corrosion resistant, for indoor & outdoor use.
|
Contractor Pack - Bagged
|
3/4'" x 10'. For hanging pipes, fastening faucets and valves, repair jobs and more.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
Vinyl coated galvanized steel DWV pipe hanger. Locking screw keeps pipe secure. Keyhole design provides faster installation. Perforated holes allow for several hanging lengths.
|
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Copper plated water pipe supply hook. Corrosion resistant, for indoor & outdoor use. Nail point ends for easy drive-in use.
|
Contractor Pack - Bagged
|
B & K Ring Hanger, Split, 1-1/4 in Opening, Malleable Iron, Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CPVC body, nut, rubber gaskets, rated at 100 PSI up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved.
|
For use with most comon drain pipe an downspout materials and sizes. Designed to connect a 4" drain to a 3" x 2" rectangular pipe, 3" round pipe or 2-1/2 " square pipe.
|
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
|
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
|
B & K Ring Hanger, Split, 1-1/2 in Opening, Malleable Iron, Galvanized
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included.
|
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Incorporates a special design which allows for pipe expansion, straps can be used on copper, CPVC and polybutylene tubing. Nails are not included.
|
B & K Ring Hanger, Split, 2 in Opening, Malleable Iron, Galvanized
|
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 1/2 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 1-1/2 in Length X 1-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CPVC body, nut, rubber gaskets, rated at 100 PSI up to 180 deg F. Pipe must be restrained after installation, Use in piping or repairs on copper or plastic pipe. NSF approved.
|
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
|
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to extend, alter or repair any combination of 1-1/4" or 1-1/2" brass or plastic drain pipes. For above ground use only.
|
Plastic strapping with perforated holes to be used for securing any size pipe. Allows custom straps to be fabricated. Easy to cut and lightweight.
|
Dahl Pipe Strap, 3/4 in Width, 10 ft Length, 24 ga Thickness, Steel, 130 lb Load
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
|
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
|
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
|
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
|
Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
For capping pipe ends. Convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. For temporary or permanent use. Can be use with any material. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Incorporates a special design which allows for pipe expansion. Can be used on copper as well as CPVC. Recommends using #6x1" screws which do not require a pre-drilling.
|
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
|
Quick, easy way to extend, alter or repair any combination of 1-1/2" or 1-1/4" brass or plastic drain pipe. Whether connecting brass or plastic, the PVC material is is formulated to provide a reliable connection that can be installedin minutes. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Easy way to cap pipe ends, clean-outs and open test pipes. Made of flexible PVC, they're suitable for above ground or underground use, on cast iron, steel, copper or plastic piping. Designed to fit all drain, waste, and vent pipe materials in a given nominal size. The convex face allows the cap to withstand greater pressure for testing purposes and minimizes ballooning. To install, simply place over open end of pipe and tighten to 60" pounds torque. Complies with ASTM D5926.
|
KBI Tube To Pipe Adapter, Series: Flo Control, ProGuard, 3/4 in Nominal, Compression X MIPT End, SCH 40 Wall Thickness, 150 psi Working, PVC, Gray, 73 deg F, 2-1/2 in Length X 2-1/2 in Width X 5 in Height, IAPMO Certified, NSF Approved, UPC Compliant, For Irrigation, Pool and Spa Industries
|
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature - 167 degrees F. Rated up to 150 PSI.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature - 167 degrees F. Rated up to 150 PSI.
|
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only. Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects no-hub drain pipes of similar material. Can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Neoprene gasket. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
|
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
|
Connects to 1-1/2" or 1-1/4" tubular traps to all common drain piping. UsePDTCF-150 for 2" copper. Easy installation. Rustproof clamps. Carded. Fits cast iron, plastic, copper, steel or lead pipe. Extra length for tee connections. NOTE: Not recommended for underground connections. For drain waste and vent use only. Do not use in pressure applications. Adapts to other pipe sizes with Qwik Bushings.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
|
Copper plated 24 gauge strapping with perforated holes to be used for securing any size pipe. Corrosion resistant, for indoor & outdoor use. Allows custom straps to be fabricated.
|
Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Connects no-hub drain pipes on any combination of plastic, steel or extra-heavy cast iron pipes. Series 300 stainless steel shield and neoprene gasket. Not recommended for underground use. Meets ASTM C-1173, C1460-2000, C1277-97. Gasket meets ASTM C-0564.
|
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
|
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The No-Hub Coupling has a patented shield design that provides maximum transfer of pressure from the clamps to the gasket and pipe. Engineered to connect no-hub cast iron pipe in applications, replacing the less-efficient hub and spigot. Patented bi-directional shield design, specially beaded gasket, interlocking clamp design, and floating eyelet design.
|
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature - 167 degrees F. Rated up to 150 PSI.
|
Dahl U-Clip, 1/2 in Opening, Nylon Coated
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Single use repair wrap. Hardens instantly when it comes in contact with moisture. No tools required. Latex gloves included.
|
Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. For above ground use only.
|
Connects 1-1/4" or 1-1/2" common drain traps to plastic, steel, cast iron or copper drain pipe. For above ground use only.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Plastic mechanical plug designed to hold higher pressures. Used for plugging open ended piping as protection from dirt, dust, or debris. Maximum allowed air is 5 PSIG
|
Provides positive seal on leaking pipes, type 430 stainless steel, max operating temperature - 167 degrees F. Rated up to 150 PSI.
|
Dahl Pipe Strap, 3/4 in Width, 25 ft Length, 22 ga Thickness, Steel, 110 lb Load
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included.
|
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Flexible pipe couplings are designed to replace standard SWV fittings. Suitable for use with cast iron, plastic, copper or steel. Suitable for use underground. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
Pipe hub donuts for compression sealing of sewer pipe joints and DWV connections such as sockets, bells, hubs and spigots. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
For connecting pipes made of unlike materials such as clay to cast iron. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
For connecting pipes made of unlike materials such as clay to cast iron. Suitable for underground use. Not for use on pressurized plumbing systems. Meets ASTM C-1173, C-1277, C1460, CISPI 310, IAPMO PS 109, PS90, & CSA B602.
|
Seal against infiltration and exfiltration. Approved by SBCCI, BOCA and UPC. Conforms to applicable parts of ASTM C443, C425, C564, and D1869. Connects SV CI Hub to Sch. 40 DWV plastic.
|
Replaces 1-1/4" or 1-1/2" plastic or metal drain traps. The flexible PVC material adjusts to the pipe's misalignment and installs securely creating a a leak-free connection. Resists freeze damage. Squeezes to clean; no drain tools or cleaners needed. carded
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Series 1056 designed for cast iron, plastic, copper, steel, or lead to cast iron, plastic, copper, steel, or lead
|
Series 1059 desgined for socket-to-socket and socket-to-pipe connections. Repair or alter plastic pipe joints without replacing perfectly good fittings. Makes socket-to-pipe connections easy and reliable. Can also be used with plastic traps. Made of elastometric PVC. Premium Series 300 stainless steel bands included.
|
NSF Standard 61 listed. Compact design. Unique positive snapping lock assures strong seal without the need to hold product in place. (Strong, fast and permanent). Meets/exceeds ASTM and ANSI standards. Made with high-impact PVC Type II Cell Class 15344-C. Carded.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dahl U-Clip, 3/4 in Opening, Nylon Coated
|
Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included.
|
Incorporates a special design which allow for pipe expansion and contraction. Saddle rotates 360 degrees. Nails not included.
|
|
|
