Home > PLUMBING > ROUGH PLUMBING SUPPLIES > PIPE
Sort By:
1 2
Genova 300 Cold Water Pressure Pipe 10 ft Genova 31007 Cold Water Pressure Pipe 10 ft Genova 300 Pipe
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 315 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 31010 Cold Water Pressure Pipe 10 ft Genova 300 Pipe Genova 50025 CPVC Tubing
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size.
Genova 30007 Cold Water Pressure Pipe 20 ft Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 300 Pipe
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Genova 31011 Cold Water Pressure Pipe 10 ft Genova 300 Cold Water Pressure Pipe 20 ft Genova 30010 Cold Water Pressure Pipe 20 ft
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova FlowGuard Water Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 300 Pipe
Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation, and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size.
Cardel 1/2X2 Copper Tubing Genova 50035 CPVC Tubing Genova 31012 Cold Water Pressure Pipe 10 ft
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe 20 ft Genova 300 Cold Water Pressure Pipe
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit- Schedule 40 range from 370 (1-1/4" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit.
Cardel Industries RC2510 Copper Tubing Genova 700 Pipe Genova Products 80011F ABS-DWV Foam Core Pipe
Mueller Coil Tubing, Short, 1/4 in Nominal Size, 10 ft Length, Copper, For General Purpose Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
Cardel 1/2X2 Copper Tubing Genova FlowGuard Water Pipe Hancor 03510010 Regular Solid Single Wall Pipe 10 ft
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Highly resistant to corrosion and energy efficient. Offers reduced condensation, quiet operation, and no scale build-up. Meets ANSI/NSF 61 requirements regardless of the pH of the water. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Genova 400 Perforated Solvent Weld Sewer and Drain Pipe Genova 400 Solid Solvent Weld Sewer and Drain Pipe Genova 300 Cold Water Pressure Pipe 20 ft
Integral hub is provided on each length of sewer and drain pipe to facilitate easy joining without additional couplings. Tough, durable, and strong; rot, moisture, and corrosion-proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, leaching systems, foundation drains, and land drainage. Meets ASTM D-2729. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size.
Cardel 3/4X2 Copper Tubing Cardel Industries RC3810 Copper Tubing Genova 700 Cellular Core Solvent Weld Dwv Pipe
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Mueller Coil Tubing, Short, 3/8 in Nominal Size, 10 ft Length, Copper, For General Purpose Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases.
Genova Products 80021F ABS-DWV Foam Core Pipe Hancor HY-PF1-04-0010 Perforated Single Wall Pipe Hancor 04540010H Solid Single Wall Pipe
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Genova 30012 Cold Water Pressure Pipe 20 ft Genova 700 Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases.
Cardel Industries 1/2X5 Copper Tubing Genova Products 80016FC ABS-DWV Pipe Hancor 0455010 Single Wall Pipe 10 ft
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Made with a white high density polyethylene layer around a black polyethylene core to form a lightweight pipe with excellent beam stiffness. Unaffected by extended exposure to the sun's heat and ultraviolet radiation. Immune to freeze/thaw conditions and continuous subzero temperatures. Corrosion resistant to acids, alkalies, and salts. Will not rust. Safe, easy, efficient installations without breaking, splitting, or cracking. Long-term performance without costly maintenance or replacement. Constructed with bell-and-spigot ends for soil-tight joints. Features a smooth interior and exterior. Meets the requirements of ASTM F810. Applications: waste management absorption fields, golf course drainage, downspouts, sidewalk "culverts," irrigation ditch enclosures, basement and foundation drainage, temporary plumbing, terrace risers, and waterway terracing.
Genova 40040 Solid Sewer Pipe Genova 40041 Perforated Sewer Pipe Hancor DW2ER040010 Perforated Regular Single Wall Pipe 10 ft
Tough, durable, and strong; rot, moisture, and corrosion-proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, leaching systems, foundation drains, and land drainage. Meets ASTM D-2729. Integral hub is provided on each length of sewer and drain pipe to facilitate easy joining without additional couplings. Made with a white high density polyethylene layer around a black polyethylene core to form a lightweight pipe with excellent beam stiffness. Unaffected by extended exposure to the sun's heat and ultraviolet radiation. Immune to freeze/thaw conditions and continuous subzero temperatures. Corrosion resistant to acids, alkalies, and salts. Will not rust. Safe, easy, efficient installations without breaking, splitting, or cracking. Long-term performance without costly maintenance or replacement. Constructed with bell-and-spigot ends for soil-tight joints. Features a smooth interior and exterior. Meets the requirements of ASTM F810. Applications: waste management absorption fields, golf course drainage, downspouts, sidewalk "culverts," irrigation ditch enclosures, basement and foundation drainage, temporary plumbing, terrace risers, and waterway terracing.
Cardel 12033 Copper Tubing Cardel 3/4X2 Copper Tubing Cambridge-Lee 1/2X10M Type M Water Tube
Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 300 Cold Water Pressure Pipe 20 ft Genova Products 560010 CPVC Pipe
Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size.
Genova 600 Solvent Weld Dwv Pipe Cardel RC2520 Copper Tubing Genova 300 Cold Water Pressure Pipe
Specially made to be used inside a 2" x 4" stud wall construction for drain-waste-vent applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Meets ASTM 2949. Mueller Coil Tubing, Short, 1/4 in Nominal Size, 20 ft Length, Copper, For General Purpose Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit.
Genova 300 Cold Water Pressure Pipe 20 ft Genova 30022 Cold Water Pressure Pipe 20 ft Cardel Industries 1/2X5 Copper Tubing
Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D2241. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 200 PSI rating at 73 degrees Fahrenheit. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Genova 400 Perforated Solvent Weld Sewer and Drain Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe Cardel Industries 3/4X5 Copper Tubing
Integral hub is provided on each length of sewer and drain pipe to facilitate easy joining without additional couplings. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Genova Products 80026FC ABS-DWV Pipe Genova 400 Solid Solvent Weld Sewer and Drain Pipe Cardel Industries 12035 Copper Tubing
High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Extremely resistant to corrosive liquids for use as sewer mains and sewer service. TIO2 ultraviolet inhibitor prevents pipe from becoming brittle due to exposure. Conforms to ASTM D-3033 and D-3034. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage.
Genova 500052 Solid Cut Pipe Cambridge-Lee 1/2X10L Type L Water Tube Cardel Industries RC3820 Copper Tubing
Used within buildings for potable hot and cold water distribution from the water meter to fixtures. Meets ASTM D2846. NSF listed. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Mueller Coil Tubing, Short, 3/8 in Nominal Size, 20 ft Length, Copper, For General Purpose
Genova 700 Pipe Genova 300 Cold Water Pressure Pipe 20 ft Genova 3101172 Solid Wall Cold Water Cut Pipe 2 ft
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. PSI ratings at 73 degrees Fahrenheit range from 280 (2" pipe) to 600 (1/2" pipe) depending on ID size. Cold water use only.
Cardel Industries RC5010 Copper Tubing Genova Products 80031F ABS-DWV Foam Core Pipe Genova 700 Solvent Weld Dwv Pipe
Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
Namasco BLACK-1/2 Pipe Cambridge-Lee 3/4X10M Type M Water Tube Namasco .25X10B Steel Pipe
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Cardel 12045 Copper Tubing Genova 700 Cellular Core Solvent Weld Dwv Pipe Cardel 12039 Copper Tubing
Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage.
Namasco GALV-1/2 Steel Pipe Cardel Industries 1/2X20M Copper Tubing Cardel 3/4X5 Copper Tubing
Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Genova 700 Dwv Cut Pipe Genova 400 Perforated Sewer and Drain Pipe With Green Gasket Genova 700 Pipe
Used for drain, waste, and vent applications. Green color for quick in-ground identification. Tough, durable, and strong. Rot, moisture, and corrosion proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, foundation drains, and land drainage. Meets ASTM D3034. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
Cardel Industries REF-1/8 Refrigeration Copper Tubing Genova Products 80041F ABS-DWV Foam Core Pipe Namasco BLACK-3/4 Pipe
Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Cardel Industries RC5810 Copper Tubing Genova 300 Cold Water Pressure Pipe Genova 3100572 Solid Wall Cold Water Cut Pipe 2 ft
Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Cold water use only.
Genova 500072 Solid Cut Pipe Namasco BLACK-1 Steel Pipe Namasco .375X10B Steel Pipe
Used within buildings for potable hot and cold water distribution from the water meter to fixtures. Meets ASTM D2846. NSF listed. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Genova 3100772 Solid Wall Cold Water Cut Pipe 2 ft Cambridge-Lee 3/4X10L Type L Water Tube Genova Products 80036FC ABS-DWV Pipe
Cold water use only. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved.
Namasco .25X10G Steel Pipe Genova 700 Cellular Core Solvent Weld Dwv Pipe Genova 3101072 Solid Wall Cold Water Cut Pipe 2 ft
Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. Cold water use only.
Namasco GALV-3/4 Steel Pipe Namasco .375X10G Steel Pipe Namasco GALV-1 Steel Pipe
Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only.
Genova 700 Dual Pressure/Drain Waste Vent Pipe Cardel REF-3/16 Refrigeration Copper Tubing Genova 700 Solvent Weld Dwv Pipe
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
Cardel Industries 1/2X20L Copper Tubing Genova 400 Solid Solvent Weld Sewer and Drain Pipe Genova 700 Dwv Cut Pipe
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Tough, durable, and strong. Rot, moisture, and corrosion proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, foundation drains, and land drainage. Meets ASTM D3034. Used for drain, waste, and vent applications.
Cardel Industries RC5020 Copper Tubing Genova 500 Pipe Cardel Industries 3/4X20M Copper Tubing
Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage. High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size. Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Genova 700 Dwv Cut Pipe Genova Products 80046FC ABS-DWV Pipe Cardel Industries 01075 Copper Tubing
Used for drain, waste, and vent applications. High-impact resistant, lightweight composite foam core for easy 1-step solvent cementing installation. Use with all Genova ABS-DWV fittings. Does not rot, rust, or corrode to keep surface smooth for easy flow. Resists chemicals commonly used in bathrooms and kitchens, unaffected by commonly used household chemicals including drain and bowl cleaners. Conforms to ASTM F 6208-01, NSF Approved. Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage.
Namasco BLK 1/2 Steel Pipe Genova 300 Cold Water Pressure Pipe Genova 700 Dwv Cut Pipe
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Used in cold water pressure applications only, such as irrigation and underground residential sprinkler systems; also used to make outdoor furniture. Pipe sizes are the same as iron pipe sizes. Meets ASTM-D1785. Approved for potable water piping systems. Solvent weld, use with pressure fittings. 160 PSI rating at 73 degrees Fahrenheit. Used for drain, waste, and vent applications.
Cardel Industries REF-1/4 Refrigeration Copper Tubing Namasco 1.25X10G Steel Pipe Genova 70042B DWV Pipe
Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
Namasco 1.25X10B Steel Pipe Namasco GALV 1/2 Steel Pipe Genova 700 Solvent Weld Dwv Pipe
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665).
Genova 700 Solvent Weld Dwv Pipe Namasco 1.5X10G Steel Pipe Cardel Industries RC5820 Copper Tubing
Solvent weld, use for drain-waste-vent applications, or with pressure fittings for pressure pipe applications. Lightweight, high-impact resistant, and corrosion-proof, resistant to all waste system liquids and gases. PSI ratings at 73 degrees Fahrenheit range from 180 (6" pipe) to 330 (1-1/2" pipe) depending on ID size. Dual rated for pressure (ASTM D1785) and drainage (ASTM D2665). Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Refrigeration grade wall thickness coils for use in liquid fed applications such as air conditioning, ice makers, humidifiers etc. Adhere to local plumbing codes for installation/usage.
Genova 400 Solid Sewer and Drain Pipe With Green Gasket Namasco BLK 3/4 Steel Pipe Namasco 1.5X10B Steel Pipe
Green color for quick in-ground identification. Tough, durable, and strong. Rot, moisture, and corrosion proof. For the building and construction industry to use as sewers and underground drains, storm drainage, house septic tank connections, foundation drains, and land drainage. Meets ASTM D3034. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only.
Cardel Industries 3/4X20L Copper Tubing Namasco 2X10B Steel Pipe Genova 500 Pipe
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. High-temperature domestic water supply used in hot and cold water pressure applications, from water main to fixtures. For hot water distribution systems up to 180 degrees Fahrenheit at 100 PSI. Sizing equals copper pipe size.
Hancor 03040010 Perforated Solid Single Wall Pipe 10 ft Cardel Industries REF-5/16 Refrigeration Copper Tubing Cardel Industries REF-3/8 Refrigeration Copper Tubing
Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage.
Cardel Industries 01082 Copper Tubing Namasco GALV 3/4 Steel Pipe Namasco 2X10G Steel Pipe
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only.
Cardel Industries 1/4X60L Copper Tubing Hancor 03510100 Regular Solid Single Wall Pipe 100 ft Hancor 03010100 Perforated Single Wall Pipe 100 ft
Used for plumbing and heating in commercial applications and residential multi-stories. Can also use for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
COPPER REFRIG 3/8INX50FT YELO COPPER REFRIG 3/8INX50FT ORNG Hancor 04010100 Perforated Regular Single Wall DWV Pipe 100 ft
Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Namasco BLK 1 Steel Pipe Cardel Industries REF-1/2 Refrigeration Copper Tubing Hancor 04510100 Regular Solid Single Wall Pipe 100 ft
Standard weight, coupled and threaded for ordinary uses in steam, water, gas and air lines. Not for drinking water use.  Ordered by the length only. Cleaned and sealed for liquid fed applications such as air conditioning, ice makers, humidifiers, and refrigeration systems. Adhere to local plumbing codes for installation/usage. Hancor heavy duty pipe for use in non-pressure drainage applications. Made of high density polyethylene. CSA approved.
Cardel Industries 01095 Copper Tubing Hancor 04730100BS Perforated/Wrap Regular Single Wall Pipe 100 ft Namasco GALV 1 Steel Pipe
Used for general-purpose residential plumbing to run water line from service entrance through house or building to bathrooms, kitchen sinks, etc. Adhere to local plumbing codes for installation/usage. ADS 4" single-wall corrugated HDPE pipe is ideal for drainage projects where flexibility, light weight and low cost are important. The pipe is perforated for subsurface water collection or leaching and wrapped with a non-woven, synthetic wrap material that allows water to flow through, but keeps sand and soil from blocking the pipe. The 100 foot roll of pipe allows installation of long runs with fewer joints. Meets ASTM F405 standards. CSA approved. Standard weight, coupled and threaded for steam and water working pressure up to 150 pounds. Ordered by the length only.
   
 
1 2