Home > PAINT & SUNDRIES > SUNDRIES > LADDERS
Sort By:
1 2
SPRING CLIP GREY 3IN          LOCK PIG TAIL                 PIN COUPLING W/COLLAR 1IN
SPRING CLIP GREY 3IN
Our Price : $2.39
LOCK PIG TAIL
Our Price : $2.99
PIN COUPLING W/COLLAR 1IN
Our Price : $3.49
Made of corrosion-resistant stainless steel. Can be used for both standard mason and walk-through (arch) scaffold frames. Used to hold MetalTech coupling pin on scaffolding frame. Meets ANSI, CSA and OSHA standards. For a hole 1/2 in. For exterior scaffolding. Meets ANSI, CSA and OSHA standards.1-1/2 x 3 in Replacement coupling pin with 1 in. collar includes locking spring. Rugged steel construction ensures lasting durability. Use with standard or arched scaffold frames. Serves as connector when stacking mason and arch scaffold frames. Tapered end allows for easy stacking. Weather resistant for lasting use. This pin is acceptable for both 1.69 in. and 1.625 in. tube O.D. frames. Meets OSHA standards for safety.
Werner AC27-L Paint Cup Liner Werner AC56 Lock-In Utility Hook LOCK ARM SCAFFOLD 13IN
LOCK ARM SCAFFOLD 13IN
Our Price : $5.69
Disposable liner for use with AC27-P paint cup SKU# 631.6558. Includes 4 liners. Use to keep cords from getting tangled in your ladder or organize cords and keep them within reach. Holds extension cords, air hoses, garden hoses, strands of lights, paint sprayers and other tools or project materials. Locks securely into ladder top or other Lock-In system accessories such as the Job Caddy (SKU# 304.3304), Utility Bucket (SKU# 304.3296), or Job Bucket (SKU# 241.1080). Use to lock when stacking frames. Use with standard or arched scaffold frames. Distance between the bolt holes are 13 in. Blue powder-coat for corrosion protection. Meets ANSI, CSA and OSHA standards. Weather resistant.
Werner AC22 Paint Can/Bucket Hanger Qualcraft 2501 Roofing Brackets Qualcraft 2502 Roofing Brackets
Holds one gallon can or bucket of paint. Slides on and off easily on the left or right side of the ladder. Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified. Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified.
Werner AC30-2 Ladder Replacement Rope With Mounting Hardware Qualcraft 2500 Roofing Brackets Werner AC19 Extension Ladder Cover
5/16" rope that can be cut to fit Werner extension ladders, up to 40' except double pulley system. Durable all steel construction with 10" platform. 10" to fit pitch on most roofs. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 10" planks. Designed to snap over extension ladder rail end caps. Resists paints, stains, thinners and solvents. Flexible, fits all single and extension fiberglass and aluminum ladders (except 7500, D7500, 500 and D500) extension ladders, protects support surfaces from dents and scratches.
Werner AC27-P Lock-In Paint Cup Werner AC58 Ladder Tool Lasso With Belt Clip Qualcraft 2504 Roofing Brackets
For trim painting and cut-in applications. Built-in magnet to secure a paint brush. Can be used with disposable paint cup liner AC27-L SKU# 631.6590. For use on ladders that include Lock-In System sockets such as the Job Caddy (SKU# 304.3304), Utility Bucket (SKU# 304.3296), or Job Bucket (SKU# 241.1080). Compatible with OBEL00 series, OBPT00 series, OBCN00 series, 6200 series, 6100 series, 6000 series, PS-48 model, and AC24 model. Secures tools from falling to protect your investments, puts tools in easy reach. Durable all steel construction with 10" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" or 2" x 10" planks as specified.
Qualcraft 2505 Roofing Brackets Qualcraft 2503 Roofing Brackets STEP STOOL FOLDING
Durable all steel construction. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks or 2" x 4" planks as specified. Durable all steel construction with 6" platform. Easy installation and removable without damaging shingles. OSHA compliant when installed according to instructions. Capacity: 1 man per 8' of staging plus 40 pounds. Maximum 8' spacing between brackets. Use 2" x 6" planks. Great step up for in the kitchen, bathroom, etc.
GUARDRAIL 5FT                 Rubbermaid FG420087WHT Roughneck Step Stools Rubbermaid FG420087BISQUE Roughneck Step Stools
GUARDRAIL 5FT
Our Price : $11.99
Meets ANSI, CSA and OSHA standards. Will not dent or rust. Bottom pads help prevent stool from slipping, protect floors. Holds up to 300 pounds. Size: 12-1/2" x 15-1/2" x 9- 1/4" high. Will not dent or rust. Bottom pads help prevent stool from slipping, protect floors. Holds up to 300 pounds. Size: 12-1/2" x 15-1/2" x 9- 1/4" high.
GUARDRAIL 7FT                 Qualcraft 2510 Roofing Brackets Mintcraft Pro YH-CS001 Casters
GUARDRAIL 7FT
Our Price : $12.99
Meets ANSI, CSA and OSHA standards. Durable heavy-duty wood and galvanized steel construction. Designed to hold a 12" platform. Easy installation and removal without damaging shingles. Adjustable two position platform. Additional safety features include a platform retainer and unique locking mechanism Capacity: 1 man per 8' staging plus 40 lbs. Maximum 8' spacing between brackets. For Sku# 879.5478 scaffold. 5" Dia. x 1-1/4" W. Rubber wheel. Pin not included. 303 lb. load capacity.
Staples 611F Tear Resistant Weather Resistant Ladder Mitt Werner PK76-3 Auto Closing Pail Shelf Werner PK76 2-Piece Pail Shelf
Fits any standard size ladder to prevent damage to support surfaces. Tough urethane resists tearing and weathering. Made in the USA. Rugged construction. Spill-Proof. Easy to keep clean. Automatically closes with stepladder. Built-in rag rack. Fits fiberglass stepladders and aluminum 400 Series stepladders. Black color. Universal auto closing pail shelf, mounting hardware and instructions included. Rugged construction. Spill-Proof. Built-in rag rack. Two piece yellow molded plastic pail shelf with aluminum arms. Works with Werner fiberglass stepladders and aluminum 400 Series ladders. Universal pail shelf, mounting hardware and instructions included.
Werner AC50-JB-3 Lock-In Job Bucket Cosco 11-905-PBL4 Safety 1St Folding Step Stools GUARDRAIL POST W/WEDGE CLAMP
Compatible with OBEL00, OBPT00, OBCN00 and 6200 series. Increase the work space on your ladder, sturdy lug and socket feature for seamless installation. Lightweight, all-plastic design. Legs lock into position; "locked" indicator is visible on top. Folds to 3-3/8" for compact storage. Top side walls help prevent accidental slipping. Convenient handle for carrying ease. Weight capacity - 200 pounds. Dimensions: Open - 10"H x 16.25"W x 11.25"D. Folded - 3.38"H x 20.13"W x 11.25"D. Meets ANSI, CSA and OSHA standards.
Michigan 1100-02 Pine Step Ladder Werner AC96 Extension Ladder Stabilizer JACK ADJ LEVELLING GALV 24IN
Wrap around top ears for top protection. Outside galvanized steel spreaders. Knee Braces on bottom step. Outside washers. Bottom of front steps fully rodded through slots. Steps spaced evenly - 9" apart. High quality finished rails with eased edges. Rail ends are angle cut for full ground contact. Blind bore back legs with 1 rear rectangular horizontal. Dimensions: Front Rails 25/32" x 2-5/8"; Back legs 25/32" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Steps 3/4" x 3-1/4"; Rear Horizontals 3/4" x 2-1/2". Rectangular. For aluminum ladders of all duty ratings and fiberglass ladders with side rails up to 3"H x 1-3/16"W. Also fits Articulated ladder in scaffold or stairway use. Mar-resistant rubber caps protect work surface. Fits aluminum series extension ladders with rails up to 3-5/16" x 1-3/16", D716, D1100, D1200, D1300, D1500, D500 (20' to 24'), M and M1 Multi-Master ladders. Includes paint can hook, mounting hardware and instructions. With plate (hollow). Meets ANSI, CSA and OSHA.
Cosco 11135CLGG4 Folding Step Stools Homebasix WK-2062A Folding Step Stools TRAY BAKER TOOL
TRAY BAKER TOOL
Our Price : $26.99
Two metal steps for strength, non-marring, skid resistant front leg tips. Opti-Bond powder finish, ribbed, slip resistant step treads. Convenient handle for carrying ease, continuous rear leg support for added strength. Meets ANSI Standards for Type III Light Duty Household Rating. Gray powder coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing: 18-1/2"; Step size: 15 L x 10-1/4"W; Open Size: 38-1/2"H x 19-1/4"W  x 20"D; Closed Size: 42-1/2" H x 19-1/4" W x 3" D. For use with I-CISC, I-CISCTP, I-CISCPY, I-CAISC and I-IRC scaffolds. Black polypropylene. 30.25 x 20 x 2.75 in.
BRACE SCAFFOLD CROSS 7X4FTX1IN Cosco 11565CGGL4 Big Step Folding Step Stools QualCraft 2481 Weather Resistant Ladder Hook With Wheel
Designed for scaffold frames that have 4 ft. locking pin spacing. Cross brace must be installed on each leg of a frame or arch frame to reach its full load capacity. Works with both standard and arched scaffold frames for versatile use. Durable construction with 1 in. O.D. galvanized steel tube, 16 ga. Weather Resistant. ANSI Specified. CSA Certified. OSHA Approved. Large heavy-duty injection molded polypropylene resin steps, ribbed slip resistant leg tips, continuous rear leg tips and glides, compact flat,  ANSI Type 3 Household Duty. Fits single or extension ladders in wood, fiberglass, and aluminum in round and "D" rung styles. Constructed of steel for strength, durability and safety. Adjustable to fit between top two ladder rungs.
QualCraft 2201 Pump Jack Brace Werner AC52-UB Lock-In Utility Bucket Werner AC18 Type-1A Step Ladder Platform
Used as bracing for wood poles. Pole should be constructed in accordance with operating instructions. Expands work surface and customizes ladder tops. For on the jobsite or household use. Locks securely into the ladder top. Can be used for wet or dry applications. Holds up to 1 gallon of liquid and has a 25 lb capacity. Integrated Lock-in System socket on the bucket allows for additions such as Paint Cup (SKU# 631.6558), ToolLasso (SKU# 304.3288) or Utility Hook (SKU# 304.3312). Slip resistant surface. Powder coated to prevent rust. Kicks out of way for easy climbing. Fits MT Series ladders.
Michigan 1100-04 Pine Step Ladder Louisville AS3000 Step Ladder STEPLADDER WOOD EXTRA HD 2FT
Wrap around top ears for top protection. Full plywood pail shelf 6-5/8" x 12". Step support rods in underside groove lock steps in place. Blind bore back legs with rear rectangular horizontals. Flush front steps. High quality finished rails with eased edges. Rails ends are angle cut for full ground contact. One inch outside washers. Bottom step braces. Meets ANSI Code. Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Grooved Steps 3/4" x 3-1/4". Slip resistant. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Large structural molded top. Large parts tray recessed 1/4" deep with tool slots. Heavy-duty side rails are full channel extrusions on the front and modified channel on back legs. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" Wide. Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish.
Cosco 11628ABK4 Lite Solutions Step Stools BRACKET SIDE 20IN             Michigan 1100-05 Pine Step Ladder
BRACKET SIDE 20IN
Our Price : $37.99
Large, heavy-duty injection molded polypropylene resin top step. Ribbed, slip-resistant step treads. Self-locking fold. Non-marring, skid-resistant leg tips and glides. Folds flat by lifting handle. Weighs 5 lbs. Meets ANSI, CSA and OSHA standards. Wrap around top ears for top protection. Full plywood pail shelf 6-5/8" x 12". Step support rods in underside groove lock steps in place. Blind bore back legs with rear rectangular horizontals. Flush front steps. High quality finished rails with eased edges. Rails ends are angle cut for full ground contact. One inch outside washers. Bottom step braces. Meets ANSI Code. Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Grooved Steps 3/4" x 3-1/4".
Qualcraft 2210 Pump Jack Pole Anchor QuickClick AC78 Ladder Stabilizer Louisville AS4004 Step Ladder
Provides additional margin of safety and security when used according to instructions with light duty scaffolding system. For painting and home repair projects. Spring-loaded locking latch for quick installation and removal. Quick release attach pins connect stabilizer arms to body without tools. Non-marring rubber end caps protect work surface. For use on singles and extensions with 1-1/4" round rungs, 1-1/2" and 1-3/4" flat rungs. No tools required for assembly. 10" standoff from work surface. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide.
QualCraft Corner Buddy Weather Resistant Ladder Stabilizer Werner 150B Step Ladder Louisville AS2100 Step Ladder
Designed for use on multi-surfaces, corners, flat, round and multi-dimensional construction. Eases access to gutters and downspouts during installation or repair and to soffits for electrical and siding applications. Can be used all around the house without having to remove from ladder. Easy connection, removal and storage. Powder coated in safety yellow for visibility, with rubber bumpers to protect building surfaces. Black molded plastic top provides large 6" wide x 12-3/8" long standing platform. Traction-Tred slip resistant full-sized steps. Pinch-Proof spreaders. Bottom step has double braces. Blue molded vinyl foot pads rivets to side rails. U.L. Listed. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3" Wide; Rear Rails 1-1/8"  Wide; Top 6" x 12-3/8"; Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Michigan 1311-04 Stocky Step Ladder Rubbermaid FG420903WHITE Ez Step Step Stools Qualcraft 2525 Roofing Brackets
Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish. Lightweight, resistant to rust and dents, easy to clean. Stands upright when folded. 25" x19" x 6-1/2". Features six-position locking adjustments. Constructed of heavy duty galvanized steel. Has a capacity of one worker per 8' or staging. Can be repositioned and taken down without damaging shingles. 3-position replaceable tongue.
Werner AP Portable Type II Work Platform Michigan 1100-06 Pine Step Ladder Werner AC54 Lock-In Job Caddy
Non-marring feet provide slip-resistance and protect floor from damage. Provides a non-skid area for standing. Lightweight, easy to carry and set up. Convenient to store. Work comfortably along walls and windows. Ideal for painting. Dimensions: 39-1/2" x 12" top; 20-9/16" highest standing level. 41"H x 16-5/8"W x 35-3/4"D. Wrap around top ears for top protection. Full plywood pail shelf 6-5/8" x 12". Step support rods in underside groove lock steps in place. Blind bore back legs with rear rectangular horizontals. Flush front steps. High quality finished rails with eased edges. Rails ends are angle cut for full ground contact. One inch outside washers. Bottom step braces. Meets ANSI Code. Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8"; Top 3/4" x 5-1/4" x 13-5/8"; Grooved Steps 3/4" x 3-1/4". Expands work surface and customizes ladder top. Holds large or odd shaped items like fluorescent bulbs or ceiling fan blades. Includes 4 storage compartments to keep small parts separated. Holders for screwdrivers, pliers, putty knives and towels. End hook is built-in for convenience. Integrated Lock-in System socket on the buck allows for additions such as Paint Cup (SKU# 631.6558), ToolLasso (SKU# 304.3288) or Utility Hook (SKU# 304.3312).
Werner 354 Single Sided Step Ladder With Pail Shelf Louisville AS4005 Step Ladder Louisville AS2100 Step Ladder
For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner 5906 Single Sided Step Ladder BRACKET SIDE 30IN             Werner 5904 Single Sided Step Ladder
BRACKET SIDE 30IN
Our Price : $49.99
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Meets ANSI, CSA and OSHA standards. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps.
Werner 356 Single Sided Step Ladder With Pail Shelf Louisville FS4006 Commercial Step Ladder OUTRIGGER EXT 32IN
OUTRIGGER EXT 32IN
Our Price : $52.99
For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Use to provide additional stability for higher elevations. High performance steel and heavy duty welds for a solid and secure footing. Use with any standard or arched scaffold frames. Blue anti-slip baked on powder coated textured finish for maximum corrosion resistance. Meets OSHA requirements.
Cosco 11130WHT Chair/Step Stools Louisville AP8000 Stepstool Homebasix WK-2063A Folding Step Stools
24"H, foam-cushioned, contoured seat lifts out of way for step up convenience. Two 9-1/2" and 17-1/2" high molded safety tread steel steps. Seat lifts up for easy access to steps. Stable chromed steel frame and contoured back, baked-on enamel trim. Protective leg tips . Includes slip-resistant platform, heavy-duty gusset bracing, top rail guard, double-rivet step construction, and slip-resistant rubber feet. Trapezoid shape platform: 14" width base, 1" top and 1" depth. Hammertone coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. Lightweight and easy to carry. Highest standing: 27-1/2". Step size: 15" L X 10" W; Open size: 50-3/4"(H) x 19-1/4"(W) x 25"(D); Closed size: 55-1/4"(H) x 19-1/4"(W) x 3"(D).
Werner 363 Single Sided Step Ladder With Pail Shelf Louisville FS2004 Commercial Step Ladder FRAME SCAFFOLD 60X60IN
FRAME SCAFFOLD 60X60IN
Our Price : $55.99
Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Powder coated. Flip locking system. Includes coupling pins and spring-locks. Gravity-lock frame lock. 48in lock spacing. Interior tubes: outside diameter 1 in. - 16 gauge. Perimeter tubes: outside diameter 1.625 in. - 13 gauge. Meets ANSI and OSHA Standards.
Werner 240 Step Ladder Michigan 1200 Pine Step Ladder Louisville FS4004 Commercial Step Ladder
Easy action open-close. Non-slip steps. Non-marring rubber tip feet. Folds to 3" for easy storage. Wide angle stance. Ideal for close-up work. UL listed. Meets ANSI Code. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Steps 6" wide; Height to 2nd step 23". Heavy gauge wrap around top ears which secure one piece top. One inch outside Pinch-Proof plated steel spreaders. Full plywood pail shelf 6-5/8" x 12". Blind bore back legs. High quality finished rail with eased edges, angle cut bottoms. Bottom step braces on front rail. Flush front grooved steps. Anti-split plate for rear pivot. Outside washers. Front steps fully rodded with steel truss block. Meets ANSI Code and OSHA requirements. Nominal Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8" (4' to 8'); One piece top 3/4" x 5-1/4" x 13-5/8"; Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA.
Werner 360 Single Sided Step Ladder With Pail Shelf Werner 6000 Step Ladder Qualcraft 2300 Staging Bracket
Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. Molded top provides large standing platform. Slip-resistant traction-tred steps. Plated steel braces on bottom steps. Combinations rail end shield and foot with slip-resistant foot pad. External pinch-proof spreaders. Dimensions: 5-5/8" x 12-3/8" top; 3" steps; 3-1/8" wide front rails; 1-1/8" wide front flange; 1-3/4" wide rear rails; 1-3/16" wide and 5/8" wide in front. Steel construction for added strength. Bolts thru wall with adjustments for wall widths. Folds compactly for convenient storage. For use with bolt only. OSHA compliant when installed according to instructions. New York State Approval 5077. Capacity: 2 men per staging plus 75 pounds. No more than 8' spacing between brackets. Use guard rails when installed over 6' above ground. Platform must be fully decked with minimum of 2" thick planks.
Cosco 11118WHT Chair/Step Stools Michigan 1311-06 Stocky Step Ladder Louisville AS4006 Step Ladder
Foam-cushioned, 24" high, contoured seat and back, upholstered in durable washable vinyl. Swing out steps 9-1/4" and 17-1/2" high. Molded safety tread. Stable chromed steel frame, baked-on enamel trim, protective leg tips. Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide.
Louisville AY8000 Extra Step Stand Mintcraft Pro YH-TR001-2 Outrigger Werner 6004 Single Sided Step Ladder
Large structural molded top measures 14" wide by 9-1/4" deep. Diamond tread for a slip-resistant platform. Each step secured with six, large headed, semi-tubular steel rivets. Heavy duty steel gussets to support bottom step. Steps are 6" wide. Meets or exceeds the safety standards set by ANSI and OSHA. Yellow powder coated finish. Steel material. Casters not included. Dimensions: 18" H x 15-5/8" W. For use with SKU# 879.5478. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
QualCraft 2420 2-Rung Short Body Ladder Jack Werner 366 Single Sided Step Ladder With Pail Shelf Werner 355 Single Sided Step Ladder With Pail Shelf
MIG welded and riveted construction. Will work on either inside or outside ladder face. Will accommodate up to 18" wide-plank. Adjustable to fit round or D-Rung ladders. Complies with OSHA requirements. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. For home repair, painting and maintenance projects. Green molded Tool-Tra-Top for quart can or small parts and slotted for tops; slotted for paint roller tray. Molded paint can hanger on back of top. Spill-Proof pail shelf with tool holders. Pinch-Proof spreaders. Slip resistant molded feet. Dimensions: front rails, 3" wide, front flange 3/4" wide; rear rails 1-1/8" wide; rear flange 1" wide; top 4-5/8" wide x 12-1/2" long; Steps 3" wide. Meets ANSI and U.L. Standards.
Werner 6005 Single Sided Step Ladder Qualcraft 2200 Pump Jacks Louisville FS1504 Extra Step Ladder
Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Steel construction. Adjustable to any height up to 30'. Your weight does the work. Raise or lower men and equipment. Held secure to wood poles with a Positive Double Lock System. Raise to position with foot pump and lower with crank. Must be used in strict compliance with Federal OSHA regulations. New York State Approval No. 4781. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Louisville FS2006 Commercial Step Ladder Werner 374 Single Sided Step Ladder With Pail Shelf Qualcraft 2204 Pump Jack Workbench
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide. Qualcraft Workbench/Guardrail Holder, For Wood Staging
DeWalt DXL3010-04 Step Ladder Werner 260 Platform Ladder Werner 6006 Single Sided Step Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3".
Louisville FS2005 Commercial Step Ladder Homebasix WK-2064A Folding Step Stools Michigan 1200 Pine Step Ladder
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Hammertone powder coated finish. Sturdy tubular steel frame. Non-slip step surface. Folds for easy storage. With plastic tray. Lightweight and easy to carry. Highest standing: 28"; Step size: 15"L x 10-1/4" W; Tray size: 14-" L x 10-" W x 1-3/8"D; Open size: 50-3/4 H x 19-1/4" W x 24" D).  Closed size: 67-1/2"(H) x 22"(W) x 5-3/4"(D). Heavy gauge wrap around top ears which secure one piece top. One inch outside Pinch-Proof plated steel spreaders. Full plywood pail shelf 6-5/8" x 12". Blind bore back legs. High quality finished rail with eased edges, angle cut bottoms. Bottom step braces on front rail. Flush front grooved steps. Anti-split plate for rear pivot. Outside washers. Front steps fully rodded with steel truss block. Meets ANSI Code and OSHA requirements. Nominal Dimensions: Front Rails 3/4" x 2-5/8"; Back Legs 3/4" x 1-5/8" (4' to 8'); One piece top 3/4" x 5-1/4" x 13-5/8";
Louisville AS2100 Step Ladder Werner 368 Single Sided Step Ladder With Pail Shelf Rubbermaid 252300BLA Step Stools
Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Slip resistant aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Manual closing, structural molded pail shelf. Skid resistant surface and outer retaining edge provide additional features. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Spill-Proof pail shelf with rag rail and tool holders (4' and above). Blue molded Tool-Tra-Top slotted for paint roller tray. Handy bucket holder clip. Pinch-Proof spreaders. Bottom and top steps braced. Slip-resistant tread on steps. Slip- resistant molded shoes. Hi-strength heat tempered heavy duty aluminum. UL Listed. Meets ANSI Code and OSHA requirements. Dimensions: 3"W front rails; 3/4"W front flange; 1-1/8"W rear rails; 1"W rear flange; 5"W  x 12-3/8"L top ; 3"W steps. Glides easily on retractable rubber coasters. Supports up to 350 Lbs. Size: 16'' base diameter x 13-1/2'' height.
Michigan 1311-08 Stocky Step Ladder Louisville FS1506 Extra Step Ladder Werner 375 Single Sided Step Ladder With Pail Shelf
Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide.
Werner 6200 Single Sided Step Ladder Werner D716-2 Multi-Section Extension Ladder LADDER IA FBRGLS CRSS-STEP 4FT
Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam side rails. Fixed aluminum lock allows push up height adjustment. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meet ANSI Code. Dimensions: Side rails 2-1/2" wide; Flange 3/4" wide; Rungs 1-1/4" wide; Base width 15-3/4" outside rails. Length of extension ladders when not extended is half the total length of the sections. Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA.
DeWalt DXL3110-06 Step Ladder Louisville AS4008 Step Ladder Werner 376 Single Sided Step Ladder With Pail Shelf
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. Structural molded top with automatic opening pail shelf. Slip resistant rubber feet. Aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceeds the safety standards set by ANSI and OSHA. Step 3" wide. Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide.
Louisville L-2324 Extension Ladder Louisville FS1505 Extra Step Ladder Werner 6200 Single Sided Step Ladder
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
DeWalt DXL3010-06 Step Ladder Werner 5908 Single Sided Step Ladder Werner D1116-2 Multi-Section Extension Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Molded braces support the bottom rear horizontal and rear rails. Slip-resistant rubber foot pads. Molded foot and knee braces on front rails. Dimensions: 5-3/8" x 13" top, 3-1/8" wide front rails, 1-1/8" wide front flange, 1-3/4" rear rails, 1-3/16" wide rear flange and 3" wide steps. Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide; Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections.
Werner 260 Platform Ladder Louisville FS4008 Commercial Step Ladder Werner 6206 Single Sided Step Ladder
Spill-Proof pail holder with rag rail and convenient tool holders. Platform automatically folds. Large slip-resistant aluminum platform. Tubular aluminum side rails. Easy storage - folds to 3- 1/2". Non-marring feet. Dimensions: Front Tubular Rails 1-1/8" diameter; Rear Tubular Rails 1" diameter; Platform 14-1/2" x 12"; Steps 3" wide. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort.  Nonconductive structural molded top provides greater impact resistance. Molded-in slots help keep tools close at hand. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Pinch resistant spreader braces. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Meets or exceed the safety standards set by ANSI and OSHA. Holster Top with lock-in accessory system secures tools from falling. Internal steel spreaders protect against abuse, storage and transport damage. Double riveted aluminum steps are deeply serrated for slip-resistance. Aluminum braces on top and bottom steps and rear horizontals. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Shock-resistant bumpers between rails avoid wear and damage in storage and transport. Orange fiberglass side rails with non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI ANSI and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-3/16" wide; Rear Rails 1-7/8" wide; Rear Flange 1-3/16" wide; Top 5-3/4" x 13"; Steps 3" wide. Rental.
LADDER IA FBRGLS CRSS-STEP 6FT CASTER SCAFFOLDING 750LB 8IN  OUTRIGGERS SET W/CSTR 4-5IN
Combines the Shelf and Step Ladder for a 2 in 1 combination made to take on multiple placement locations. The shelf design and its unique ProTop and innovative locking mechanism allows for positioning against a wall, building, or pole. When unlocked, this ladder sets up as a regular step ladder. The angles of the step ladder allow the capability to get closer to the work area. The Cross-Step Ladder is equipped with a V-shape ProTop with non-marring slip resistant rubber tread that allows it to be placed safely on corners and poles. This ladder?s ProTop also features a magnet and multiple slots that allow quick and easy access to your tools. Includes SHOX impact absorption system, Raptor Boot with bonded heavy duty slip resistant tread, inside spreader braces that protect the ladder during transport, heavy duty reinforcements and double rivets. Meets or exceeds the safety standards set by ANSI, CSA, and OSHA. 8 in wheel enables to easily move scaffolding and locks into place for stability and reliability. Secure and safe, use with standard or arch frame. Caster wheels have a 3.88 in Height stem, they do not clamp. Use with locking pin. Specifications: 19.25 x 4.5 x 24 in. assembled, weighs 33 lb, 5 in. double locking heavy duty casters. Includes 4 outriggers, 4 casters and 12 locking pins. Compatible with I-CISC, I-CISCTP and I-CAISC. Meets ANSI, CSA and OSHA standards.
Werner TW373-30 Work Step Ladder Werner AC10 2-Rung Long Body Ladder Jack Werner 7306 Single Sided Step Ladder
External pinch-proof spreaders for easy opening and closing. Double angle bracing on all steps. Mar-resistant feet for slip-resistance on concrete, wood and vinyl floors. Double top steps provide wide platform. Slip-resistant Traction-Tred Steps on front and rear section. Extra wide for versatile use as work stand, stage or material support. Lightweight and portable. Heavy steel hinges. Dimensions: top 8" x 30", 3" wide rails, 3" wide steps and 7/8" wide flange. Long body style attaches to two rungs. Supports 12", 14" and 20" wide stages or planks. Extruded heavy gauge aluminum Tool-Tra-Top. Traction-Tred deeply serrated aluminum steps, double riveted. Heavy duty 1" inside plated steel spreader bars. Optional black pail shelf kit: Model No. 76-3. Combination rail end shield and shoe with extruded rubber slip-resistant foot pad. Massive 3/16" thick side plates. Four solid 1/4" aluminum rivets attach top to front rail. 5/16" shoulder bolt and lock nut on top hinge. Every rivet backed up by metal part or washer to protect fiberglass. U-channel double braces on bottom step. Yellow fiberglass side rails with non- irritating fabric outer mat assures a smooth trouble-free surface even after weathering. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front rails 3-1/8" wide; Front flange 1-3/16" wide; Top 7-1/4"W x 14-7/8"L; steps 3" wide; Rear rails 1-7/8" wide; Rear flange 1-3/16.
DeWalt DXL3110-08 Step Ladder Louisville LeveLok Swivel Ladder Leveler Louisville FS2008 Commercial Step Ladder
Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and tool slots. Pinch-resistant spreader braces provide stability. Double-riveted steps. Slip-resistant aluminum shoes. Extends up to 10" for steps. Attaches to either side or on multiple ladders. Large heavy duty swivel shoe with spurs. With patented KeyLok Quick Connect system. Fits FE1700, FE3200 (16'-32 and 36' - 40'), FE7600, FE4200HD, L-3022-PT, AE3200, AE2200, AE2800, AE1200HD, AE1200, and L-2094. Includes 1 quick connect leveler and 1 set (2) quick connect base units. Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, pipe and 2 x 4 holder, and curved front surface for added comfort. Heavy-duty plated steel spreader braces with double rivet hinge to protect user from pinched fingers. Slip resistant aluminum angle feet with thick rubber thread on all four legs to provide sure footing. Double Rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Skid resistant surface and outer retaining edge. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Werner D1120-2 Multi-Section Extension Ladder Werner 6200 Single Sided Step Ladder Werner PS-48 Portable Rolling Scaffold
Twist-Proof due to the Alflo rung joints. Mar-resistant molded end caps and rail closures. Traction-Tred deeply serrated flat steps. Easy to grip modified I-beam siderails. Smoothly operating extruded aluminum double rung locks. Shoe pivots to allow the shoe pad full ground contact for slip-resistance. Equipped with rope and smooth operating pulley except for No. D1116-2. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Siderails 2-3/4" wide (16' and 20') 3" wide (24' to 28'); Flange 15/16" wide; Rungs 1- 1/2" wide; Base width 16" outside rails. Length of extension ladders when not extended is half the total length of the sections. Holster Top with lock-in accessory system secures tools from falling. Front of ladder top is slotted for paint roller tray. Sturdy molded hanger clip underneath top holds paint can. Pinch-Proof outside steel spreaders. Aluminum steps are deeply serrated for slip-resistance. Plated steel braces on top and bottom steps and rear horizontals. Ribbed slip-resistant rubber foot pads protected by aluminum shoe. Shock-resistant bumper pad on inside rear footpads, avoids wear and damage in storage and transport. Blue non-conductive siderails and yellow top with a non-irritating fabric outer mat assures a smooth trouble-free surface even after weathering. Meets ANSI Code and OSHA Standards. Dimensions: Front Rails 3-1/8" wide; Front Flange 1-1/8"; Rear Rails 1-3/4" wide; Rear Flange 1-3/16" wide and 5/8" wide in the front; Top 5-3/4" x 13"; Steps 3". Planks are adjustable making multiple working heights. Also use as a workbench, storage, and hauling heavy materials. High grade wheels prevent marring by locking securely into place. Lightweight. Platform Dimensions: 46-1/8" x 8-1/2" per plank (two planks per unit), 41-1/2" x 17" total standing area (both planks combined), 30-1/8" highest standing level.
Werner Level-Master PK80 Ladder Leveler With Safety Shoes Vulcan YH-SD401/YTL40102 Scaffold Michigan 1311-10 Stocky Step Ladder
Steel swivel shoes. Easily locks and levels. Up to 8-1/2" of adjustment. Heavy duty construction. Attaches to ladders side rails with locking nuts and bolts. Width of ladder and leveler is 3-1/4" wider than ladder. Fits aluminum series No. D1100, No. D1200, No. D1300, No. D1500, and No. D500. Fiberglass series No. D5900, No. D6000-2, No. D6200-2, No. 7100, No. D7100, and D7500. Two Level-Master Ladder Levelers (one for each side of ladder), mounting hardware and instructions included. U.L. Listed and Labeled. Meets OSHA Standards. Steel construction with rust resistant powder coated finish. 250 lb. step capacity with slip resistant surface. 4" locking casters. Includes 2 attachable tool bags. 18" W x 21-1/2" D x 58-1/25"H. Strong southern yellow pine construction, heavy duty wrap around top irons, metal to metal hinge, for strength and durability, heavy duty angle bracing-additional braces on 6' size and longer, strong yet lightweight front and back legs. Exclusive Michigan Ladder Silk Finish.
Aluma-Plank 5500 Twist Proof Work Platform Aluma-Plank 5300 Twist Proof Work Platform Louisville FS1508 Extra Step Ladder
For use with steel scaffolds. Heavy-duty hook reinforcement plates. Dimpled and pierced decking reduces material build-up and provides slip-resistant surface. Constructed with exclusive Alfo rung joints. Dimensions: Side Rail Length 7'; Side Rail Depth 3". For use with steel scaffolds. Heavy-duty 1/2" exterior grade plywood. Fastened with special oversized rivets. Dimensions: Side Rail Length 7'; Side Rail Depth 3-1/2". Includes PROTOP, a molded copolymer top with recessed hardware tray, paint bucket holder, drill slots, tool slots, magnet tray, pipe and 2 x 4 holder, and curved front surface for added comfort. Equipped with DA BOOT, a slip resistant aluminum angle feet with thick aluminum angle feet with thick rubber tread on all four legs to provide sure footing. Polypropylene copolymer upper boot provides strength, durability and fiberglass rail surface protection. Spreader bracer inside fiberglass rails help keep braces from getting hooked or abused in transit. Double rivet step construction. Each step secured with six, large headed, semi-tubular steel rivets for maximum strength. Vertically mounted U-shaped back braces spaced on one foot intervals provide maximum stiffness and discourage unsafe climbing. Nonconductive full channel rails are convered with a polyester veil. Meets or exceeds the safety standards set by ANSI and OSHA. Steps 3" wide.
Louisville L-2324 Extension Ladder M-MPP719 PLATFORM 7FT X 19IN  DeWalt DXL3010-08 Step Ladder
M-MPP719 PLATFORM 7FT X 19IN
Our Price : $129.99
Tempered, serrated aluminum D-shaped rungs provide for a slip-resistant surface. Impact resistant caps on all rail ends provide rail protection for longer life and protect work surfaces from marring. Meets or exceeds the safety standards set by ANSI and OSHA. Dimensions: .95" rail depth, 14-1/10" base inside, 13.312" fly inside, 16" base outside and 15.212" fly outside. L-2324-16 does not include rope and pulley. Includes sliding locks for securing. 5/8? plywood. Meets ANSI, CSA and OSHA standards. Expand work step with 25-percent greater step surface, 3.75" step size. Durable top with magnet and multiple tool slots and comfort when climbing the ladder. Pinch-resistant internal spreader braces provide stability. Double-riveted steps. Heavy duty boot with maximum slip-resistant surface area.
Werner 378 Single Sided Step Ladder With Pail Shelf Werner T6006 Twin Ladder Werner 406 Single Sided Step Ladder
Spill-Proof pail shelf with rag rack. Unique H spreader with handgrip on 4', 5' and 6' models. Black molded Tool-Tra-Top. Pinchless outside spreaders on 3', 7', 8' and 10' models. Double angle bracing on bottom step. Black, molded vinyl shoe pads riveted to aluminum foot bracket. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3" wide; Front Flange 7/8" wide; Rear Rails 1-1/4" wide; Rear Flange 1" wide; Top 5-1/8" wide x 12-1/8" long; Steps 3" wide. Back-up aluminum plates reinforce all top connectors. Braces on top and bottom steps. Combination rail end shield and foot with slip-resistant foot pad. Rubber step bumpers to resist damage. Slip-resistant traction-tred steps on front and rear sections. External Pinch-Proof spreaders. Tool-Tra-Top with dual drill holster, tool and small parts tray. Every rivet backed up by metal part or washer to protect rails. Dimensions: Top 8-1/2" x 13"; Steps 3" wide; Rails 3-1/8" wide; Flange 1-1/8" wide. Heavy duty extruded Tool-Tra-Top. Four solid 1/4" rivets attach top to front rails on each side. 5/16" shoulder bolt and lock nut on top hinge. Massive 3/16" thick side plates. Outside spreaders on 4', 5' and 6' models. Inside spreaders on 8' and above models. Rear horizontals are spaced 12" apart with knee-bracing which is mounted on full U-channel rear rails. Heavy duty black slip-resistant feet. Traction-Tred deeply serrated steps. U.L. Listed. Meets ANSI Code and OSHA requirements. Dimensions: Front Rails 3-3/8" wide; Front Flange 1-1/8" wide; Rear Rails 1-3/4" wide; Rear Flange 1" wide; Top 7" wide x 14" long; Steps 3" wide. Rental.
Louisville PD9000 Scaffold Platform Werner Old Blue Single Sided Step Ladder GUARDRAIL ST F/BKR STYL SCFLD
Includes safety latch. Solid bolt construction. 2" rail size. Customized HolsterTop with lock-in accessory system secures tools from falling. Integrated ToolLasso system secures tools from falling. Multi-Use hook for hanging tools and buckets. Rugged professional grade bracing. 3 ToolLasso included. Includes a tape measure holder, 2 ToolLasso sockets, 2 screwdriver slots, MagnaGrip magnetic tool holder and a drill or hammer holder. Dimensions: top 5-3/4" x 13" wide, front rails 3-1/8" wide, flange 1-3/16" wide, steps 3" wide, and rear rails 1-7/8" wide. Assembled size: 69.75 x 29.25 x 44.5 in. Weighs 59 Lb. 1in 16 gauge structure. Includes 2 guardrails with gates and 4 toggle pins. Compatible with I-BMSS, I-CISC, I-CISCTP AND I-CAISC. Meets ANSI, OSHA, and CSA standards.
   
 
1 2