Home > CONSTRUCTION HARDWARE > VENTILATION PRODUCTS
Sort By:
1 2
Duraflo 641604 Soffit Ventilator Duraflo 641608 Soffit Ventilator Maurice Franklin RL-100 Round Screen Louver
Installs easily under eaves. Small louvers guard against weather and insect entry. Injection molded UV resistant polypropylene for impact. White soffit vent. Installs easily under eaves. Small louvers guard against weather and insect entry. Injection molded UV resistant polypropylene for impact. White soffit vent. Maurice Franklin Screen Louver, Round, Series: RL-100, 3/16 sq-in Net Free Area, 1 in Cutout Width, 13/32 in Cutout Height, 5 Blades, Aluminum, Mill, 0.02 ga Thickness, 1.219 in Overall Width
Maurice Franklin PLW-100 Round Screen Louver Maurice Franklin PLB-100 Round Screen Louver Maurice Franklin RLW-100 Round Screen Louver
One piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas. One piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas. Maurice Franklin Screen Louver, Round, Series: RLW-100, 3/16 sq-in Net Free Area, 1 in Cutout Width, 13/32 in Cutout Height, 5 Blades, Aluminum, White, 0.02 ga Thickness, 1.219 in Overall Width
Maurice Franklin RL-100 Round Screen Louver Duraflo 620808 Square Gable Vent Maurice Franklin RLW-100 Round Screen Louver
Maurice Franklin Screen Louver, Round, Series: RL-100, 1.21 sq-in Net Free Area, 2-1/2 in Cutout Width, 5/8 in Cutout Height, 6 Blades, Aluminum, Mill, 0.02 ga Thickness, 2.907 in Overall Width Provides longterm durability and function to home. Injection molded UV resistant polypropylene. White gable vents. Maurice Franklin Screen Louver, Round, Series: RLW-100, 1.21 sq-in Net Free Area, 2-1/2 in Cutout Width, 5/8 in Cutout Height, 6 Blades, Aluminum, White, 0.02 ga Thickness, 2.907 in Overall Width
Maurice Franklin RL-100 Round Screen Louver Maurice Franklin RLB-100 Round Screen Louver Bestvents 510BL Open Air Grille Foundation Vent
Maurice Franklin Screen Louver, Round, Series: RL-100, 0.399 sq-in Net Free Area, 1-1/2 in Cutout Width, 9/16 in Cutout Height, 5 Blades, Aluminum, Mill, 0.02 ga Thickness, 1.813 in Overall Width Maurice Franklin Screen Louver, Round, Series: RLB-100, 1.21 sq-in Net Free Area, 2-1/2 in Cutout Width, 5/8 in Cutout Height, 6 Blades, Aluminum, Brown, 0.02 ga Thickness, 2.907 in Overall Width Grill wiith a flange and (4) screws to hold it in the foundation opening; has NO flap or slide mechanism to open or close it, so the air can constantly move through. Size: 7-3/4" x 15-1/4" so it easily fits the standard 8" x 16" block foundation opening.
Bestvents 510BR Open Air Grille Foundation Vent Maurice Franklin PLW-100 Round Screen Louver Maurice Franklin PLW-100 Round Screen Louver
Grill wiith a flange and (4) screws to hold it in the foundation opening; has NO flap or slide mechanism to open or close it, so the air can constantly move through. Size: 7-3/4" x 15-1/4" so it easily fits the standard 8" x 16" block foundation opening. One piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas. One piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas.
Maurice Franklin PLB-100 Round Screen Louver Maurice Franklin RL-100 Round Screen Louver Bestvents 500BL Manual Foundation Vent with Damper
One piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas. Maurice Franklin Screen Louver, Round, Series: RL-100, 1.735 sq-in Net Free Area, 3 in Cutout Width, 11/16 in Cutout Height, 6 Blades, Aluminum, Mill, 0.02 ga Thickness, 3-17/32 in Overall Width Bestvents Foundation Vent, Manual, Black Oxide, With Damper
Bestvents 510WH Open Air Grille Foundation Vent Bestvents 500BR Manual Foundation Vent with Damper Bestvents 500GR Manual Foundation Vent with Damper
Grill wiith a flange and (4) screws to hold it in the foundation opening; has NO flap or slide mechanism to open or close it, so the air can constantly move through. Size: 7-3/4" x 15-1/4" so it easily fits the standard 8" x 16" block foundation opening. Bestvents Foundation Vent, Manual, Brown, With Damper Bestvents Foundation Vent, Manual, Gray, With Damper
Maurice Franklin RL-100 Round Screen Louver Maurice Franklin RLW-100 Round Screen Louver GAF Master Flow IR61 Slant Back Super Low Profile Roof Louver
Maurice Franklin Screen Louver, Round, Series: RL-100, 0.803 sq-in Net Free Area, 2 in Cutout Width, 5/8 in Cutout Height, 6 Blades, Aluminum, Mill, 0.02 ga Thickness, 2.391 in Overall Width Maurice Franklin Screen Louver, Round, Series: RLW-100, 0.399 sq-in Net Free Area, 1-1/2 in Cutout Width, 9/16 in Cutout Height, 5 Blades, Aluminum, White, 0.02 ga Thickness, 1.813 in Overall Width Just 2"H for better appearance. Injection-molded, high-impact resin construction for long life. Colors complement most roofs. Pre-drilled nail holes make installation easier. 11-3/4" x 9-3/4" opening, 18-1/2" x 17-1/2" flashing, 4-1/4"H, 37 sq.in. of net free ventilating area.
LL Buildsite DA1212W Square Dual Louver Bestvents 319BL Jumbo Foundation Vent Duraflo 620812 Rectangle Gable Vent
One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. For King and Queen size brick. Fits 9-1/4" x 16" vent openings. 1-3/4" frame depth and 8" x 8" sized mesh. Mesh is made of aluminum perma kote epoxy charcoal. Frame is made of high-density polypropylene resins. 9-1/4" x 16". Provides longterm durability and function to home. Injection molded UV resistant polypropylene for impact. White gable vents.
Maurice Franklin RLB-100 Round Screen Louver Maurice Franklin RLB-100 Round Screen Louver Maurice Franklin RLW-100 Round Screen Louver
Maurice Franklin Screen Louver, Round, Series: RLB-100, 0.803 sq-in Net Free Area, 2 in Cutout Width, 5/8 in Cutout Height, 6 Blades, Aluminum, Brown, 0.02 ga Thickness, 2.391 in Overall Width Maurice Franklin Screen Louver, Round, Series: RLB-100, 1.735 sq-in Net Free Area, 3 in Cutout Width, 11/16 in Cutout Height, 6 Blades, Aluminum, Brown, 0.02 ga Thickness, 3-17/32 in Overall Width Maurice Franklin Screen Louver, Round, Series: RLW-100, 0.803 sq-in Net Free Area, 2 in Cutout Width, 5/8 in Cutout Height, 6 Blades, Aluminum, White, 0.02 ga Thickness, 2.391 in Overall Width
Maurice Franklin RLW-100 Round Screen Louver Gaf BVSII Block Foundation Vent Maurice Franklin PLW-100 Round Screen Louver
Maurice Franklin Screen Louver, Round, Series: RLW-100, 1.735 sq-in Net Free Area, 3 in Cutout Width, 11/16 in Cutout Height, 6 Blades, Aluminum, White, 0.02 ga Thickness, 3-17/32 in Overall Width Aluminum vanes, lintel not required. For block, brick, or frame construction. Recommended for high-level ventilation. Galvanized steel and aluminum. 8" x 16" x 2-3/4". One piece white polyethylene. Recommended for moisture control in sidewalls construction or other restricted areas.
Lambro 164W Exhaust Double Sided Under Eave Ventilator LL Buildsite DA1212 Square Dual Louver LL Buildsite DA1218 Rectangle Dual Louver
Plastic double-sided under eave vent adapts to 4" or 6" exhaust ducts; includes (2) removable screens and (1) 6" to 4" transition collar; exhaust only; has backdraft damper and bug screen. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting.
Duraflo 6050G Square Top Type B Roof Ventilator Duraflo 6050BL Square Top Type B Roof Ventilator Duraflo 6050WW Square Top Type B Roof Ventilator
Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant ploypropylene. Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant ploypropylene. Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant ploypropylene.
Bestvents 500WH Manual Foundation Vent with Damper Duraflo 6050BR Square Top Type B Roof Ventilator Maurice Franklin RL-100 Round Screen Louver
Bestvents Foundation Vent, Manual, White, With Damper Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant ploypropylene. Maurice Franklin Screen Louver, Round, Series: RL-100, 3.5 sq-in Net Free Area, 4 in Cutout Width, 3/4 in Cutout Height, 9 Blades, Aluminum, Mill, 0.02 ga Thickness, 4-5/8 in Overall Width
LL Buildsite DA1218W Rectangle Dual Louver Maurice Franklin RLW-100 Round Screen Louver Maurice Franklin RLB-100 Round Screen Louver
One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. Maurice Franklin Screen Louver, Round, Series: RLW-100, 3.5 sq-in Net Free Area, 4 in Cutout Width, 3/4 in Cutout Height, 9 Blades, Aluminum, White, 0.02 ga Thickness, 4-5/8 in Overall Width Maurice Franklin Screen Louver, Round, Series: RLB-100, 3.5 sq-in Net Free Area, 4 in Cutout Width, 3/4 in Cutout Height, 9 Blades, Aluminum, Brown, 0.02 ga Thickness, 4-5/8 in Overall Width
Duraflo 6065BL Slant Back Roof Ventilator Duraflo 6065BR Slant Back Roof Ventilator Duraflo 621212COMB Square Rectangular Combined Gable Vent
Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17.5" x 18.5" flashing with 4.3" height. 61 square inches of net free area. UV resistant polypropylene. Polypropylene material. Ideal for steep pitched roofs. Low profile and a stair step screen to provide more airflow in a smaller vent. 17.5" x 18.5" flashing with 4.3" height. 61 square inches of net free area. UV resistant polypropylene. Provides longterm durability and function to home. Injection molded UV resistant polypropylene. White gable vents.
Duraflo WeatherPRO PRO50 Roof Ventilator Duraflo WeatherPRO PRO50 Roof Ventilator Bestvents A-ELBLACK Foundation Vent
Patent baffle system wards off driving snow and blistering rain. Ideal for most all roof pitches. Eliminates bird baffling. Won't dent, crush or peel. Cold impact resistant down to -40 degrees. UV resistant polypropylene. 50 sq. in. net free area. Patent baffle system wards off driving snow and blistering rain. Ideal for most all roof pitches. Eliminates bird baffling. Won't dent, crush or peel. Cold impact resistant down to -40 degrees. UV resistant polypropylene. 50 sq. in. net free area. With 18" lintel for new construction. Fits standard 8" x 16" vent openings. High density thermo-plastic construction. Automatically opens at 70 degrees Fahrenheit, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion resistant metal parts. 62 square inches net free area. Heavy-duty aluminum mesh screen, front and back. 8" x 16".
Duraflo 6013BL Roof Dryer Ventilator Duraflo 6013BR Roof Dryer Ventilator Duraflo 6011BL Type B Roof Ventilator
Exhausts clothing dryer through the roof. Ideal for condominiums, town houses, apartments and upstairs laundry rooms. Flapper and attached collar. Injection molded UV resistant polypropylene. Exhausts clothing dryer through the roof. Ideal for condominiums, town houses, apartments and upstairs laundry rooms. Flapper and attached collar. Injection molded UV resistant polypropylene. Exhausts bathroom vents through the roof. Seamless outer body will not leak. Injection molded UV resistant polypropylene. Collar and flapper comes attached for easy, one person installation. Attaches to any 4'' or 5'' duct or pipe.
Duraflo WeatherPRO Turbo Retro Fit Type B Replacement Turbine Bestvents 304LGR Foundation Vent Bestvents A-ELBROWN Foundation Vent
Exhausts bathroom vents through the roof. Seamless outer body will not leak. Injection molded UV resistant polypropylene. Collar and flapper comes attached for easy, one person installation. Attaches to any 4'' or 5'' duct or pipe. With 18" lintel for new construction. Fits standard 8" x 16" vent openings. High density thermo-plastic construction. Automatically opens at 70 degrees Fahrenheit, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion resistant metal parts. 62 square inches net free area. Heavy-duty aluminum mesh screen, front and back. 8" x 16". With 18" lintel for new construction. Fits standard 8" x 16" vent openings. High density thermo-plastic construction. Automatically opens at 70 degrees Fahrenheit, closes at 40 (approximately). Key working mechanism, bi-metal coil, fully enclosed by protective cover. No electrical hook-up required. Stainless steel and corrosion resistant metal parts. 62 square inches net free area. Heavy-duty aluminum mesh screen, front and back. 8" x 16".
Duraflo WeatherPRO PRO50 Roof Ventilator Duraflo 6075BR Square Top Type B Roof Ventilator Builders Edge 140037079001 Scallop Exhaust Ventilator
Patent baffle system wards off driving snow and blistering rain. Ideal for most all roof pitches. Eliminates bird baffling. Won't dent, crush or peel. Cold impact resistant down to -40 degrees. UV resistant polypropylene. 50 sq. in. net free area. Low profile style. Molded in screen. Angled screen that prevents birds from nesting. Wide, flexible flange will not crack on installation, even in cold weather. Angled throat to effectively deflect water. Injection molded UV resistant ploypropylene. For side walls with patented exhaust flaps which stay closed when not in use; durable, maintenance free, U.V. stabilized and constructed with color molded-through so they won't scratch, flake or fade; comes complete with 8" aluminum tube (4" diameter); optional: small animal guard sold separately; net free area 12 sq. inches; Limited Lifetime warranty. Made in USA.
RIDGE VENT METRIC BROWN       LL Buildsite WC12 Weather Cap Energy Saver 306MWH Foundation Vent With Damper
"PRORidge" Airfoil designed edge allows smooth airflow over the ridge line maximizing effective ventilation from the attic space while deflecting blowing debris; internal baffles and drainage openings easily deflect and direct away extreme weather; molded nail supports; code regulated insect grill; net free area: 18.3 sq. inches per linear foot/118 sq-cm per linear foot; roof pitch range 3/12 - 12/12; injection molded from pure, high grade polypropylene with premium UV inhibitor additives. Available for use with either metric or imperial size shingles. Galvanized steel construction. Replaces turbine heads during cold weather, or severe weather conditions. No.WC12 Dade Country Approved 04-0618.01 when used with Master Flow base. No.WC12F Florida Building Code (FBC) Approved FL5027. Replaces old-style manual vents. Fits standard 8" x 16" vent openings. Automatically opens at 70 degrees Fahrenheit and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 square inch net free area. High-density thermo-plastic construction. Stainless steel and corrosion resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8" x 16".
Energy Saver B-E BROWN (MB) Foundation Vent With Damper Bestvents B-EBLACK(MB) Foundation Vent Bestvents 315CBR Replacement Foundation Vent
Replaces old-style manual vents. Fits standard 8" x 16" vent openings. Automatically opens at 70 degrees Fahrenheit and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 square inch net free area. High-density thermo-plastic construction. Stainless steel and corrosion resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8" x 16". Replaces old-style manual vents. Fits standard 8" x 16" vent openings. Automatically opens at 70 degrees Fahrenheit and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 square inch net free area. High-density thermo-plastic construction. Stainless steel and corrosion resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8" x 16". With 1"W frame for new construction or to replace old foundation vents. Fits standard 8" x 16" concrete block opening. Operates automatically without electricity; opens at 70 degrees Fahrenheit, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8" heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 square inch net free area. 8" x 16".
Bestvents 315CBL Replacement Foundation Vent Bestvents 315CGR Replacement Foundation Vent Builders Edge 140016774001 Hooded Ventilator
With 1"W frame for new construction or to replace old foundation vents. Fits standard 8" x 16" concrete block opening. Operates automatically without electricity; opens at 70 degrees Fahrenheit, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8" heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 square inch net free area. 8" x 16". With 1"W frame for new construction or to replace old foundation vents. Fits standard 8" x 16" concrete block opening. Operates automatically without electricity; opens at 70 degrees Fahrenheit, closes at 40 (approximately). Simple homeowner/DIYer snap-in installation, with color matched set screws for additional stability. Removable back for maintenance and cleaning. Screened with 1/8" heavy-duty aluminum mesh. High-density thermo-plastic construction. All metal parts are corrosion resistant stainless steel. Aluminum louvers. No mortar required for installation. 62 square inch net free area. 8" x 16". Classic design and function for venting air through side walls; durable, maintenance-free, U.V. stabilized and constructed with color molded-through so they won't scratch, flake or fade; built-in concealed exhaust flap stays closed when not in use; net free area 12 sq. inches; locking positions: .75", 1" and 1.25"; fitted with 4" exhaust pipe and pipe length 8"; animal guards and wire screen sold separately; Limited Lifetime warranty. Made in USA.
Energy Saver 306MGR Foundation Vent With Damper LL Buildsite DA1424 Dual Louver Duraflo 621218 Rectangle Gable Vent
Replaces old-style manual vents. Fits standard 8" x 16" vent openings. Automatically opens at 70 degrees Fahrenheit and closes at 40 (approximately). The key mechanism, bi-metal coil, fully enclosed in protective cover. Stainless steel compression spring with 1 adjustable screw for easy installation. 65 square inch net free area. High-density thermo-plastic construction. Stainless steel and corrosion resistant metal parts. Heavy-duty aluminum mesh screen, front and back. No electrical hook-up required. 8" x 16". One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. Provides longterm durability and function to home. Injection molded UV resistant polypropylene for impact. White gable vents.
Gaf FVRABL Foundation Vent LL Buildsite DA1424W Dual Louver Bestvents 201CA Metal Slider Foundation Vent
Hi-density polyethylene construction. Auto-open at 70 degrees Fahrenheit, closes at 40 degrees to lower risk of frozen pipes and save energy. Replaces manual vent. Snap-in installation. 57 sq. in. NFVA. 16'' x 8''. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. Bestvents Foundation Vent, Metal Slider, Cast Aluminum
LL Buildsite DA1824 Dual Louver LL Buildsite DA1824W Dual Louver GAF Master Flow 12GNV4B Roof Mount Goose Neck Ventilator
One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. One piece aluminum central louver panel construction with pre-punched louvered vanes. Designed for flush or recessed mounting. Ideal for appliances needing ventilation. Heavy duty screen deters animals and insects; large flashing for added leak protection. Black.
Builders Edge 140057575001 Intake/Exhaust Vent LL Buildsite PT-6 Replacement Thermostat Duraflo 626060-00 Octagon Gable Vent
Use for venting bathroom and kitchen exhaust fans; not for use as dryer or furnace vent;  durable, maintenance free, U.V. stabilized and constructed with color molded-through so they won't scratch, flake or fade; full fiberglass screening for complete insect protection; net free area 12 sq. inch; Limited Lifetime warranty. Made in USA. Automatic adjustable. Inline with vent. Outside arrow indicator for easy changes. Compatible with all single speed power vents. 4.4 amps, 120 VAC, 60 Hz. Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 58 sq. ins. of net free area. Includes a 3" snap on  trim ring for easy installation.
Duraflo 626055-00 Round Gable Vent Duraflo 626053-00 Round Gable Vent Duraflo 626043-00 Square Gable Vent
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 55 sq. ins. of net free area. Molded in screen prevents insects and bees from nesting in the gable vent. Wide trim ring. Drip channel to channel water to the front of the siding to prevent wood rot. Removable template.  Deep wood grain. Weeping holes to prevent condensation or moisture from remaining trapped. Large flange; level lines. Injection molded UV resistant polypropylene. 55 sq. in. of net free area. White gable. Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq. ins. of net free area.
Duraflo 626058-00 Octagon Gable Vent Duraflo 626080-00 Small Rectangular Gable Vent Duraflo 626075-00 Small Rectangular Gable Vent
Molded in screen prevents insects and bees from nesting in the gable vent. Wide trim ring. Drip channel to channel water to the front of the siding to prevent wood rot. Removable template.  Deep wood grain. Weeping holes to prevent condensation or moisture from remaining trapped. Large flange; level lines. Injection molded UV resistance polypropylene. 58 sq. in. of net free area. White gable. Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq. ins. of net free area for 12" x 18" and 18" x 24". 74 sq. ins. of net free area for 22" x 28". Rough cut opening is 12.5" x 18.25". Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq. ins. of net free area for 12" x 18" and 18" x 24". 74 sq. ins. of net free area for 22" x 28". Rough cut opening is 12.5" x 18.25".
GAF Master Flow SGM20 Shutter Power Gable Ventilator Builders Edge 140056774001 Hooded Ventilator LL Buildsite 12GNV7BLK Roof Mount Goose Neck Ventilator
Use with all attic power gable mount vents; moving air opens the louvers only when the power vent is operating; when vent is off, shutter helps prevent infiltration of rain , snow, insects, etc.; maintenance-free white aluminum construction; can be painted if desired. Classic design and function for venting air through side walls; durable, maintenance-free, U.V. stabilized and constructed with color molded-through so they won't scratch, flake or fade; built-in concealed exhaust flap stays closed when not in use; net free area 25 sq. inches; locking positions: .75", 1" and 1.25"; fitted with 6" exhaust pipe and pipe length 8-1/10"; wire screen included; Limited Lifetime warranty. Made in USA. Ideal for appliances needing ventilation. Heavy duty screen deters animals and insects; large flashing for added leak protection. Black.
Lomanco C816W Cornice Vent Gaf Master Flow ARSBL Joint Strap Gaf Master Flow ARSBR Joint Strap
All aluminum, rust-free construction; overall size of 8" x 16" louver; 8 x 8 perma-coated aluminum screen attached; pre-drilled holes; unique eyebrow designed louvers provides maximum ventilating capacity with weather infiltration; 65 square inches of net free area. Joint straps for AR10 series aluminum ridge vent. Miami Dade County Approved #NOA 99-0422.04. Nos.ARSBLF, ARSBRF, & ARSWHF Florida Building Code (FBC) Approved FL 5027. Joint straps for AR10 series aluminum ridge vent. Miami Dade County Approved #NOA 99-0422.04. Nos.ARSBLF, ARSBRF, & ARSWHF Florida Building Code (FBC) Approved FL 5027.
Lomanco C416W Cornice Vent Cobra 2005 Shingle Over Coil Ridge Vent Quarrix Building Products 58784 Ridge Vent
All aluminum, rust-free construction; Overall size of 4" x 16" louver; 8 x 8 perma-coated aluminum screen attached; pre-drilled holes; unique eyebrow designed louvers provides maximum ventilating capacity with weather infiltration; 25 square inches of net free area. Use on roof pitches from 3/12 to 20/12. Helps remove excess heat and moisture to protect against premature roof deterioration and helps prevent problems with birds, insects and animals in attic. Prevents roof rot in attic or roof deck. Minimizes peeling and extends the life of exterior and interior paint. Limits mold growth. Easy to install, shingle over design is virtually invisible when installed. Includes "Smart Nails" for hand-nailing, or 1-3/4" coil nails for nail guns. Meets or exceeds all code requirements. 16.9 sq. ins. per linear foot of net free ventilating area when hand-nailed. 14.1 sq. ins. per linear foot of net free ventilating area when using nail gun. Will not crack or dent during installation. Won't corrode, rust, or turn brittle. Works with traditional size ridge cap shingles. Use under asphalt shingles, metal roofing, cedar shakes or slate; virtually invisible with low-profile design; no baffle to collect debris or clog; HDPE crush-resistant material; adapts to roof pitches 3/12 to 20/12; certified by ICC, BOCA, ICBO, UL CLASS A or C, TDI and Miami Dade county.
Duraflo 626120-00 Large Rectangular Gable Vent LL Buildsite PVM105/110 Replacement Motor Duraflo 626110-00 Cathedral Gable Vent
Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 44 sq. ins. of net free area for 12" x 18" and 18" x 24". 74 sq. ins. of net free area for 22" x 28". Rough cut opening is 12.5" x 18.25". Replacement motor for GM30, PG1, PG2, MD105, MD105D, H122D, PR1, PR1D, PR2D, PR2DHT, EGV5, ERV4 & ERV5 series power vents. Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 90 sq. ins. of net free area.
Lomanco PVMTR Replacement Motor GAF Master Flow R50A Square Top Roof Louver GAF Master Flow IR65G Slant Back Roof Louver
Replacement motor (model FO510B2944) for the LomanCool 2000/1800 power vent.  Replaces  previous motors with the following model numbers: AO416B2059, AO510B2389 and FO510B2497. A universal mounting hardware kit comes in the box with each motor. Motor replacement does not include blade, conduit or thermostat. Motor specifications: 3.4 Amps, 1/10 HP, 1100 RPM and 120 Volts. Square-top metal utility vent; recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation; large capacity: full 50 square inches of net free ventilating area (NFA) per vent; versatile, available with square throat in heavy duty aluminum; easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed. High impact resin. Scratch, crush, and dent resistant, with UV inhibitors to keep consistent color. 12 percent larger flashing with pre-drilled nail holes, and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4" x 10-3/4" opening, 20-1/4" x 18" flashing, 5-7/8"H. 65 square inches of net free ventilating area. CSA Listed.
LL Buildsite EAC16X4 Rectangle Undereave Vent New York Wire 11520 Louver/Soffit Screen GAF Master Flow IR65BL Slant Back Roof Louver
All purpose intake ventilation prepunched nail holes. Surface mount. Corrosion resistant. 16" x 4" vents have 26 sq. ins. of net free area. 16" x 8" vents have 65 sq. ins. of net free area. Made from heavy gauge aluminum with varnish coating; mesh is fine enough to be an effective filter and strong enough to withstand attack from birds, squirrels and other would be intruders. 100' length. High impact resin. Scratch, crush, and dent resistant, with UV inhibitors to keep consistent color. 12 percent larger flashing with pre-drilled nail holes, and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4" x 10-3/4" opening, 20-1/4" x 18" flashing, 5-7/8"H. 65 square inches of net free ventilating area. CSA Listed.
GAF Master Flow IR65BR Slant Back Roof Louver GAF Master Flow IR65WW Slant Back Roof Louver Duraflo WeatherPRO Turbo Roof Ventilator
High impact resin. Scratch, crush, and dent resistant, with UV inhibitors to keep consistent color. 12 percent larger flashing with pre-drilled nail holes, and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4" x 10-3/4" opening, 20-1/4" x 18" flashing, 5-7/8"H. 65 square inches of net free ventilating area. CSA Listed. High impact resin. Scratch, crush, and dent resistant, with UV inhibitors to keep consistent color. 12 percent larger flashing with pre-drilled nail holes, and a built-in screen to deter birds and rodents and prevent clogging. Slant back design to prevent weather infiltration especially in deep slope applications. Hood is snapped in place rather than tacked to reduce the chance of blow-off. 11-3/4" x 10-3/4" opening, 20-1/4" x 18" flashing, 5-7/8"H. 65 square inches of net free ventilating area. CSA Listed. UV resistant polypropylene. Internal baffles deflect water and snow, allowing it to drain harmlessly out the drainage openings. Designed to allow high air flow while providing defense against weather infiltration. 117 sq. in.
Duraflo WeatherPRO Turbo Roof Ventilator Duraflo 626095-00 Half Moon Gable Vent LL Buildsite EAC16X8 Rectangle Undereave Vent
UV resistant polypropylene. Internal baffles deflect water and snow, allowing it to drain harmlessly out the drainage openings. Designed to allow high air flow while providing defense against weather infiltration. 117 sq. in. Drip channel drains water to the front of the siding to eliminate wood rot. Wide trim ring, removable template, large flange, and level lines. Injection-molded UV resistant polypropylene for impact. Molded in screen prevents insects and bees from nesting in gable vent. Molded in screen cannot become unglued. Deep wood grain finish enhances appearance for a real wood look. Weeping holes prevent condensation or moisture from remaining trapped. Suitable for use with vinyl or aluminum siding, shake, stucco or brick. 111 sq. ins. of net free area. All purpose intake ventilation prepunched nail holes. Surface mount. Corrosion resistant. 16" x 4" vents have 26 sq. ins. of net free area. 16" x 8" vents have 65 sq. ins. of net free area.
LL Buildsite EAC16X4W Rectangle Undereave Vent LL Buildsite EAC16X4BR Undereave Vent GAF Master Flow R50ABL Square Top Roof Louver
All purpose intake ventilation prepunched nail holes. Surface mount. Corrosion resistant. 16" x 4" vents have 26 sq. ins. of net free area. 16" x 8" vents have 65 sq. ins. of net free area. All purpose intake ventilation prepunched nail holes. Surface mount. Corrosion resistant. 16" x 4" vents have 26 sq. ins. of net free area. 16" x 8" vents have 65 sq. ins. of net free area. Square-top metal utility vent; recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation; large capacity: full 50 square inches of net free ventilating area (NFA) per vent; versatile, available with square throat in heavy duty aluminum; easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed.
GAF Master Flow R50ABR Square Top Roof Louver Bestvents PMS-1BLACK Foundation Vent Bestvents PMS-1BROWN Foundation Vent
Square-top metal utility vent; recommended for kitchen duct outlets and bathroom fan exhausts as well as ventilation; large capacity: full 50 square inches of net free ventilating area (NFA) per vent; versatile, available with square throat in heavy duty aluminum; easy to install, pre-drilled nail holes with extra wide flashing area. CSA listed. With 18"L x 1 3/4"W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 40 square inches net free area. 1/8" aluminum screen. 8" x 16". With 18"L x 1 3/4"W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 40 square inches net free area. 1/8" aluminum screen. 8" x 16".
LL Buildsite EAC16X8W Rectangle Undereave Vent LL Buildsite EAC16X8BR Undereave Vent Bestvents PMS-1 Foundation Vent
All purpose intake ventilation prepunched nail holes. Surface mount. Corrosion resistant. 16" x 4" vents have 26 sq. ins. of net free area. 16" x 8" vents have 65 sq. ins. of net free area. All purpose intake ventilation prepunched nail holes. Surface mount. Corrosion resistant. 16" x 4" vents have 26 sq. ins. of net free area. 16" x 8" vents have 65 sq. ins. of net free area. With 18"L x 1 3/4"W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 40 square inches net free area. 1/8" aluminum screen. 8" x 16".
Bestvents PMD-1BLACK Push/Pull Foundation Vent GAF Master Flow SSB960ABL Slant Back Roof Louver Gaf Master Flow ARCP End Plug/Connector
With 18"L x 1-3/4"W built-in lintel for new block, brick or frame foundation construction. Durable polypropylene construction. 72 square inches net free area. 1/8" aluminum screen. 8" x 16". Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed. For all AR10 series ridge vent.
GAF Master Flow SSB960A Slant Back Roof Louver GAF Master Flow SSB960ABR Slant Back Roof Louver GAF Master Flow SSB960AWW Slant Back Roof Louver
Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed. Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed. Aluminum material resists rust. Fully enclosed hood to help prevent rodent/insect infiltration and leaf/pine needle clogging. Embossed finish hides scratches and resists wear. Larger flashing with pre-drilled nail holes makes installation easier, helps prevent leaks. 9-7/8" opening; 16" x 201/2 flashing dimension. 60 sq. in. of net free ventilating area per vent. Dade County Approved. Florida Building Code (FBC) Approved for specified SKUs. CSA listed.
Lomanco 750 Slant Back Static Roof Ventilator GAF Master Flow RT65G Square Top Roof Louver GAF Master Flow RT65BR Square Top Roof Louver
Three sides louvered for greater air flow. Large nailing flange. All-aluminum, rust-free construction. Fits all pitched roofs. Weather-tight seamed collar. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. A Model 700 with a neoprene damper installed for use as a kitchen/bathroom exhaust is available.  50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Miami Dade County approved. Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed. Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed.
GAF Master Flow RT65BL Square Top Roof Louver GAF Master Flow RT65WW Square Top Roof Louver GAF Master Flow IR61 Super Low Profile Slant Back Roof Louver
Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed. Scratch, dent and crush resistant high impact resin plastic. 10" x 10" opening; 17-5/16" x 16-13/16" flashing. 50 square inches of net free ventilating area. CSA listed. Just 2"H for better appearance. Injection-molded, high-impact resin construction for long life. Colors complement most roofs. Pre-drilled nail holes make installation easier. 11-3/4" x 9-3/4" opening, 18-1/2" x 17-1/2" flashing, 4-1/4"H, 37 sq.in. of net free ventilating area.
Add-A-Vent 1800 Gable Ventilator Lomanco 750B Slant Back Static Roof Ventilator Lo-OmniRoll LOR-30 Ridge Vent
All aluminum construction. Balanced blades pitched for smooth operation and high volume air removal. Five blades with 12" diameter. Factory-set adjustable thermostat (switches on at 100 degrees and off at 85 degrees). Thermostat features a "push to test" button. Can be mounted in horizontal or vertical positions on either 16" or 24" center framing members. Designed to mount behind existing gable louver. Motor: 1/10 HP; 1100 RPM; 3.4 Amps; 120 Volts. Three sides louvered for greater air flow. Large nailing flange. All-aluminum, rust-free construction. Fits all pitched roofs. Weather-tight seamed collar. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. A Model 700 with a neoprene damper installed for use as a kitchen/bathroom exhaust is available.  50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Miami Dade County approved. Can be installed with a pneumatic nail gun or hammer. Two coils of 1-3/4" nails provided. External convolute baffles - incurved design allows flexibility to roll up and out while maintaining its shape. Can be cut at one foot intervals - multiple cut lines eliminates unnecessary scrap. Weather protection and performance with no filter to clog. Molded fanfold end plug. Molded centerline. Nail holes marked every 6" - supported every foot. 11 square inches of net free ventilating area per lineal foot. External venturi baffle. Adjusts from 2/12 to 16/12 roof pitches. Limited lifetime warranty- the engineered material guarantees it will last as long as your shingles. Miami Dade County Approved 13-0701.11. 52 CFM at wind velocity of 3 MPH; 148 CFM at wind velocity of 8 MPH; 283 CFM at wind velocity of 15 MPH.
Lomanco 750BR Slant Back Static Roof Ventilator Gaf PFV1 Power Foundation Vent Lomanco 750-GSB Slant Back Static Roof Ventilator
Three sides louvered for greater air flow. Large nailing flange. All-aluminum, rust-free construction. Fits all pitched roofs. Weather-tight seamed collar. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. A Model 700 with a neoprene damper installed for use as a kitchen/bathroom exhaust is available.  50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size. Miami Dade County approved. Polymer construction, enclosure with with steel screen. Easy installation, fits in traditional foundation vent openings with simple plug and go operation.  Effectively removes damaging excess moisture from crawl spaces and basements, while helping to prevent the growth of mold. UL and ETL Listed. Three sides louvered for greater air flow. Large nailing flange. Heavy-duty galvanized steel construction. Fits all pitched roofs. Weather-tight seamed collar and metal screen insert for enhanced weather protection. High profile for increased weather protection and circulation. Prevents roof discoloration. Bird-proof. 50 square inches of net free ventilating area. 16" x 20-5/16" x 5" overall size.
Cobra Snow Country 2027000CU Ridge Vent Lomancool 2000 2000 Standard Roof Mount Power Ventilator Lomancool 2000 2000BR Standard Roof Mount Power Ventilator
Helps resist snow infiltration in harsh winter climates. Prevent roof rot in attic or roof deck. Minimize peeling and extend the life of exterior and interior paint. Limits mold growth. Allows heat/condensation to escape at most effective location. Shingle-over design blends into ridge line. Watertight, passes 110-MPH wind-driven rain test. External baffles help deflect wind/rain, no end caps needed. 1/8" louver spacing helps keep insects out. Energy-efficient, crush-resistant, with internal structural support for added durability. Flexible 3-point hinge for installation on 3:12 to 16:12 sloped roofs. 40' replaces 18 conventional or ten 12" turbine roof vents. Quick alignment, special tabs for easy, reliable connection. No overdrive, reinforced nail holes. "EasyTear" feature allows product to be hand-torn in 3" increments. Edge overhang allows smooth, continuous coverage between sections. Provides 18 sq.in/linear foot net-free ventilating area. Works with traditional size ridge cap shingles. Boxed. All-aluminum construction. Deep drawn flange and rain shield keep water out. Factory-set adjustable thermostat switches on at 100 degrees and off at 85 degrees Fahrenheit. Thermostat features a "push to test" button. Balanced fan blades for quiet operation. 8" x 8" aluminum screen attached for increased protection. 20" x 23" base plate. Features 12" diameter blade. 3.4 Amp, 120 Volt, 1100 RPM motor. 16-0510.25 Miami Dade County approved. All-aluminum construction. Deep drawn flange and rain shield keep water out. Factory-set adjustable thermostat switches on at 100 degrees and off at 85 degrees Fahrenheit. Thermostat features a "push to test" button. Balanced fan blades for quiet operation. 8" x 8" aluminum screen attached for increased protection. 20" x 23" base plate. Features 12" diameter blade. 3.4 Amp, 120 Volt, 1100 RPM motor. 16-0510.25 Miami Dade County approved.
Lomancool 2000 2000B Standard Roof Mount Power Ventilator Gaf LW1 Grill Foundation Vent with Damper Durovent UDV2248 Rafter Ventilator
All-aluminum construction. Deep drawn flange and rain shield keep water out. Factory-set adjustable thermostat switches on at 100 degrees and off at 85 degrees Fahrenheit. Thermostat features a "push to test" button. Balanced fan blades for quiet operation. 8" x 8" aluminum screen attached for increased protection. 20" x 23" base plate. Features 12" diameter blade. 3.4 Amp, 120 Volt, 1100 RPM motor. 16-0510.25 Miami Dade County approved. Die-cast aluminum, grill style. Designed for nailing to floor joists or as a foundation block replacement. 8" x 16" . The polystyrene material provides a lightweight water resistant air channel. Ideal for high volume new construction or lower cost re-insulation. Perforated center line to fit all applications. Wide nailing flange and center strut allows for easy installation. Economical way to meet energy code requirements for attic air flow.
Gaf LW1L Grill Foundation Vent with 1 3/8 in lintel and Damper Lomancool 2000 2000BTH Standard Roof Mount Power Ventilator Diversi-Plast 59092 Ridge Vent
Designed for nailing to floor joists or as a foundation block replacement. With 1-3/8"W lintel. 8" x 16". All-aluminum construction. Deep drawn flange and rain shield keep water out. Factory-set adjustable thermostat switches on at 100 degrees and off at 85 degrees Fahrenheit. Thermostat features a "push to test" button. Humidistat allows moisture and humidity levels to be controlled during colder months. Balanced fan blades for quiet operation. 8" x 8" aluminum screen attached for increased protection. 20" x 23" base plate. Features 12" diameter blade. 3.4 Amp, 120 Volt, 1100 RPM motor. Use under asphalt shingles, metal roofing, cedar shakes or slate; virtually invisible with low-profile design; no baffle to collect debris or clog; HDPE crush-resistant material; adapts to roof pitches 3/12 to 20/12; certified by ICC, BOCA, ICBO, UL CLASS A or C, TDI and Miami Dade county.
Lomanco OR4 Ridge Vent Gaf 500 Grate Foundation Vent with Shutter Provent UPV1448 Roof Ventilator
Internal aerodynamic curved baffles. 18 square inches of net free ventilating area per lineal foot. External perpendicular omni baffles. Weatherproof under-lapping joint. Four drain holes per foot per side. External venturi baffle. Pre-formed to 3/12 pitch. 10 supported nail holes.  Alignment tabs. External water shield. Slot width guide lines. Adjusts from 2/12 to 16/12 roof pitches. Co-polymer materials. Limited lifetime warranty- the engineered material guarantees it will last as long as your shingles. No connectors required. Molded fanfold end plugs - no accessories or alterations needed. Miami Dade County Approved 16-0510.27. 95 CFM at wind velocity of 3 MPH; 235 CFM at wind velocity of 8 MPH; 430 CFM at wind velocity of 15 MPH; OR4 with nails and OR4 with screen available. Die-cast aluminum with lintel for foundation block construction. Positive open/close damper action. Lowers risk of frozen pipes, saves energy, and helps prevent foundation decay. 8" x 16". Ideal for premium construction and for difficult applications like re-insulation and spray foam. "PROVENT" may be installed prior to the soffit panel installation without fear of blow-out. Made with Pro-Grade tear resistant high impact plastic. Rigid vent construction eliminates breakage during re-insulation. Full joist coverage for maximum air flow.
   
 
1 2