Home > MEASURING & LEVELING
Sort By:
1 2 3
Stanley 42-193/184 Line Level Johnson Level 575 Structo-Cast Line Levels Irwin Industrial 1794483  Line Levels
Level is lightweight, very durable with a flat base for surface leveling. Accurate with a clear 360 degree vial. Durable level vial is impact resistant. Lightweight construction reduces line sag. Unrestricted hooks allows for easy movement on line. Used for masonry, landscape and sheet metal work. Model 595 features "Multi-Pitch" vial reads slope in 1/8" increments. High impact ABS plastic. Easy to read vial. Durable open hooks to slide on the line. Allows you to level and layout string and can be used on chalk reels to snap a level line.
Irwin 1794487 Bullseye Level Structo Cast 7500 Torpedo Level Johnson 405 Square Stair Gauge
Designed to provide multi-directional leveling. Durable, molded frame. Easy to read. High impact frame is non-conductive and non-corrosive with V-groove edge fits on pipe and conduit. Magnetic edge holds to ferrous metal surfaces (model 7500M). High visibility on job site (models 7500-ORANGE). Heavy duty brass flush mounted thumbscrews. Used for repeat angle cuts for stairs and rafters. Attaches to all standard framing and carpenter squares.
Lufkin L610 Measuring Tape Stanley 47-400 Magnetic Stud Finder Johnson Level 7500M  Torpedo Levels
Lightweight, contour grip, Hi-Viz orange case is easy to find and fits comfortably in hand. Slide lock design allows for easy control of tape blade, wide base helps keep tape standing upright, removable belt clip and easy-to-read yellow clad blade (not replaceable). Provides dependable detection of wall studs. Magnet works by locating steel nails and screws used to hold drywall to studs. Base of the stud finder is notched for convenient marking once studs are located. High impact frame is non-conductive and non-corrosive with V-groove edge fits on pipe and conduit. Magnetic edge holds to ferrous metal surfaces (model 7500M). High visibility on job site (models 7500-ORANGE).
General Tools 300/1 Flexible Precision Measuring Rule Empire 93 Line Level Johnson 500 Pocket Level With Magnetic Pickup 5 in L
Stainless steel with depth gauge pocket clip. 32nds and 64ths on one side, decimal equivalents on reverse. 15/32" wide. Lightweight construction minimizes line sag. Unbendable open hooks allow level to slide freely. Pocket clip will guard tool against loss. High-impact body with V-Groove edge that fits on pipe and conduit and durable acrylic vial reads level. Strong magnetic pickup tip and metal pocket clip.
TAPE MEASURE 6FT              Powerlock 39-130 Measuring Tape Johnson Structo Cast B75 Sliding T-Bevel
TAPE MEASURE 6FT
Our Price : $4.29
Features a 3' blade standout; polymer-coated blade withstands abrasion; convenient and lightweight; handy for quick measurements; compact size fits in pocket; durable key ring makes it easy to carry anywhere; "tru-Zero" hook for accurate inside and outside measurements. Trim and lightweight metallic colored ABS case with durable key ring for convenience. Yellow, blade lacquer-coated for added rust protection, slide lock keeps blade extended as needed. For locating and transferring any angle from 0 degree to 360 degrees. Heavy duty adjustable stainless steel blade will not rust or corrode, a recessed grip in the handle. Easy-to-use wing nut for positive blade lock.
Johnson 555 Line/Surface Level Swanson Speedlite T0118 High Visibility Square Stanley 42-287 Lightweight Line Level
Lightweight, durable aluminum hexagonal body construction reduces line sag. Unrestricted hooks allow for easy movement. Used for masonry, landscape and sheet metal work. Functions as a torpedo level and angle finder. It has many of the same features as the one and only Speed Square, but is constructed of lightweight high-impact composite. Center line guide for locating center of round stock, bulit in block level that is easy to read from all angles, and a beveled edge for ease of reading. Aluminum construction is lightweight and durable with flat base for surface leveling. Special hang hooks grip line which enables level to slide freely for positioning; 360 degree vial for easy readability.
General Tools 803 Stair Gauge Set Johnson 175-O Post Level Swanson Speedlite T0111NEW Level Square
Easy attachment to any rafter square. Use for angle cuts on rafters, or stair stringers. Can also be used as security stops on window or door metal channels. Durable molded body with rugged acrylic vials read plumb and level simultaneously. Reflective backing increases vial visibility. Rubber strap allows hands free use quickly attaches to any post, pole or stringer. Functions as a torpedo level and angle finder. It has many of the same features as the one and only Speed Square, but is constructed of lightweight high-impact composite. Center line guide for locating center of round stock, bulit in block level that is easy to read from all angles, and a beveled edge for ease of reading.
General Tools 843/1 Pencil Compass/Scriber Irwin Industrial 1794484  Line Levels LINE LEVEL SET
Made from brass-plated steel with a hardened-steel pin. The Compass has a jaw capacity of 8" in diameter and a full-length, hardened steel pin for scribing and stability. Wing nut adjustment up to 8". Used for marking contours and circles. Pencil not included. Easy to read vials. Durable open hooks to slide on the line. Aluminum construction. Line level allows you to level and layout string and can be used on chalk reels to snap a level line. Durable level vial is impact resistant. Lightweight construction reduces line sag. Unrestricted hooks allows for easy movement on line. Used for masonry, landscape and sheet metal work. Model 595 features "Multi-Pitch" vial reads slope in 1/8" increments.
Johnson Structo Cast Rafter Angle Square Stanley 42-294 Torpedo Level Structo Cast 450 Tri and Mitre Square
Durable, lightweight "Structo-Cast" high-impact molded frame; permanent molded graduations for quick and easy measurements; thick edge is useful as a saw guide. Fluorescent orange color is easy to see. High-impact ABS; top-reading feature allows visibility from above; tinted 360 degree vials for readability; high visibility orange body. Heavy duty stainless steel blade will not rust or corrode. "Structo-Cast" handle is durable and light weight; 1/8" increments.
General Tools 842 Pencil Compass/Scriber M-D 49985 Contour Gauge SQUARE STEEL FRAME 8X12IN
Robust scribing and marking tool with a jaw capacity of up to 9". The fulcrum spring handle makes this tool great for making contours, circles and edge marks. Made from durable die cast metal with scribe guide for edge marking. For use with pencil (included) or slim ball-point pen. Instant template for marking precise ceramic tile cuts. No rust plastic conforms to shape and holds pattern. "EZRead" permanent thermal bonded numbers and 1/16", 1/8" graduations; rugged steel construction with low glare, anti-rust powder coating.
Postrite 340-08 Magnetic Post Level Stanley 30-485 Measuring Tape Johnson 05 Hexagonal Plumb Bob
Folds closed, opens flat; click-lock every 15 degree; adjustable elastic strap for non-magnetic surfaces; 4 powerful magnets for metal surfaces. High impact, high-visibility yellow case stands, High-contrast blade for easy readability with a 7' standout. For finding a plumb (vertical) line over a long distance. Removable cap for quick, easy and accurate centered string installation.
Quick Square 46-060 Pocket Square IPG 600WP300 Barricade Tape Stanley 30-455 Measuring Tape
ABS plastic body holds up to heavy-duty use; versatile layout tool works as a rafter square, try square, protractor or power saw guide. Non pressure sensitive vinyl. Yellow tape with (WET PAINT) black lettering; 3" wide, 3 mm thickness. High impact, high-visibility yellow case stands, High-contrast blade for easy readability with a 7' standout.
Johnson 08 Hexagonal Plumb Bob Structo Cast 415 Professional Combination Square Swanson Speedlite T0701 High Visibility Square
For finding a plumb (vertical) line over a long distance. Removable cap for quick, easy and accurate centered string installation. Stainless steel blade with permanently stamped graduations 1/8", 1/16", 1/32" with heavy duty "Structo-Cast" molded head. Reversible head with lock bolt and steel screw. Durable acrylic level vial. Functions as a framing square, try square, miter square, protractor, saw guide, stair gauge and out-of-square corner angle finder. It's constructed of lightweight high-impact structural composite. This tool can be used with siding and other delicate materials, since it won't mar softer finishes and larger body covers more material, centerline for determining center of round stock, and a beveled edge for ease of reading. Includes: 60-page Swanson Blue Book and layout bar with hardware.
Powerlock 33-115 Measuring Tape Kapro Ergocast 444-00 Rafter Square General Tools 29 Angle Protractor With Brass Locknut
Slim, metallic-colored ABS case fits perfectly in a pocket. Back of blade provides scale that measures up to 3' diameters; special Tru-Zero hook does double duty as a pivot for drawing circles and arcs Heat-treated spring stands up to regular use; Polymer-coated blade for long life. Perfect tool for when you need a lightweight easy to use rafter square; use for marking and cutting of rafters, stairs or any basic angle; all gradations are molded-in so they will not wear off during repeated use; durable, lightweight, ergocast material; molded-in conversion tables; easy-to-read gradations marked with precise cutting angles base enables easy marking and cutting. A practical tool for measuring and duplicating difficult angles where a standard protractor or t-bevel cannot fit. The Protractor works on outside, inside and sloped angles from 0 to 165 degrees. The four-piece design adds additional versatility for measuring particularly difficult angles. Fine black graduations from 0 degree to 80 degrees in opposite directions. Brass lock nut.
Irwin 1794466 High Visibility Rafter Square Lufkin L616 Measuring Tape Johnson 8500M Magnetic Torpedo Level
Used for marking angles, for cutting rafters and for scribing lines. Also can be used as a protractor and saw guide. Easy to read measurement scales and durable engineering. Permanent deep markings. High visibility orange color. Lightweight, contour grip, Hi-Viz orange case is easy to find and fits comfortably in hand. Slide lock design allows for easy control of tape blade, wide base helps keep tape standing upright, removable belt clip and easy-to-read yellow clad blade (not replaceable). Aluminum reinforced frame with high impact panels, V-groove frame that fits on pipe and conduit. Magnetic edge holds to ferrous metal surfaces and durable acrylic vials.
Structo Cast 7700 I-Beam Level LeverLock 30-812 Measuring Tape Irwin 1794482 Magnetic Post Level
One-piece with closed end, lightweight, high-impact, foam-mold polystyrene construction.  Large, highly visible 3-position vials with snap-on black vial covers; easy to replace.  High visibility Glo frame with convenient hand holes. Power return feature, with automatic bottom lock, streamlines tape operation. Yellow, high visibility case with belt clip on back. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Polymer coating and heat-treated spring extend life. Ideal for layout jobs. Allows you to plumb and level posts, poles, pipes, railings and more. Durable molded frame. Magnetic strip and rubber strap for hands free work.
Stanley 42-468 I-Beam Level Stanley 46-502 Tri and Mitre Square Stanley 46-825 T-Bevel
Durable, shock-resistant ABS construction. Top read center vial designed for instant readability. Measuring scale adds utility. Non marring material will not damage finished surfaces. High visibility yellow is easy to spot on the job site. Lightweight aluminum body with durable plastic handle. Can be used to lay out 45 and 90 degree angles; 8" blade with embossed 1/8" graduations. Durable stainless steel blade with built-in blade lock for transferring angles. Tough 5-1/2", plastic handle provides handy, comfortable grip.
Lufkin W616 Single Side Measuring Tape Powerlock 33-312 Measuring Tape Stanley 45-912 Carpenter Square
Pocket size ideal for office or home. High strength black case. Yellow clad blade is flexible with bold graduations on yellow background. Black markings one side only. Consecutive inches to 1/16ths bottom edge, first 12" to 1/32nds; 16" centers designated by diamond; every 12th inch in red. Entire blade coated with heavy-duty Mylar polyester film for unbeatable durability. Two-rivet, corrosion-resistant hook stands up to continuous use. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Die cast metal case. High-quality hardened steel for durability and long life. Embossed graduations for easy reading on face and back; 1/8" graduations on face and back. Reverse reading scale makes measuring more efficient. Treated with a clear, protective finish that resists rust.
Irwin 50 Magnetic Torpedo Level Irwin 1794462 Flat Carpenter Square Johnson RAS-1B Professional Rafter Square
50 series. 3 vials with plumb, level and 45 degree readings. ABS frame for a strong, impact resistant body. Rare magnets allow for easy hands free steel construction work. Used for laying out and marking angles in framing, roofing and stairway work. Also can be used for checking squareness and flatness. Features a solid aluminum cast body with exclusive CNC machined edges, permanent molded gradations, and a low-glare, protective coat finish; thick edge is useful as a saw guide; continuous scribing notches ideal for ripping at 3-1/2" and 5-1/2". Can also be used as a ruler or can be used to measure angles. The diagonal edge has markings for laying out rafters, roof trim, and stair angles.
Stanley 30-456 Measuring Tape Stanley 45-500 Carpenter Square Lufkin W6110 Single Side Measuring Tape
7' standout; 1/2", 3/4" and 1" blade widths; high-contrast blade for easy readibility; high-impact, high-visibility yellow case stands; three-rivet, corrosion-resistant hook moves to allow accurate inside/outside measurements. High-quality hardened steel for durability and long life. Black 1/8" embossed graduations for easy reading on face and back. Reverse reading scale makes measuring more efficient. Treated with a clear, protective buff finish that resists rust. Pocket size ideal for office or home. High strength black case. Yellow clad blade is flexible with bold graduations on yellow background. Black markings one side only. Consecutive inches to 1/16ths bottom edge, first 12" to 1/32nds; 16" centers designated by diamond; every 12th inch in red.
Empire 1110 Flat Tradesman Square General Tools 616 Flexible Measuring Rule LEVEL TORPEDO MAG ALUM 9IN
Permanently stamped numbers and 1/8" graduations. Durable protective epoxy finish to prevent rust; 1/16" thick. Precision made, with etched fine black graduations, on stainless steel finish. Side 1: 10, 100, side 2 :-32, 64. Magnetic working edge allows for hands-free use on ferrous metal surfaces; oversized aluminum reinforced frame; "SurroundView" vials reflect ambient light for easy-read; V-groove frame fits on pipe and conduit; top-read window for easy viewing; tapered design fits in tool pouch or pocket.
LeverLock 33-281 Measuring Tape Empire Magnum 2990 Rafter Square Empire 36 Magnetic Protractor
Durable bi-material case with belt clip. Self locking blade with fractional read blade graphics, magnetic end hook and Tru-Zero hook for accuracy. Solid heavy duty aluminum extruded square will not bend, break, rust or corrode, stamped conversion tables and thick edge makes for a safer saw guide. Magnetic base and back. Easy reading dial with adjustable angle pointer. Built-in angle pitch calculator on back.
Empire E255 Pocket Combination Square General Tools 837 Contour Gauge With Pins General Tools 230 Economy Feeler Gauge
Precision machined head and true bluevials ensure squareness to .001. Etched stainless steel blade with inch graduations. Machined square head self-aligning drawbolt and a hardened scriber. Ultra thin fingers measure profiles up to 3-1/2" deep. Includes rule marking on body with inch graduations and stainless steel pins. Used for precise woodworking, installation tile floors or linoleum. Used for adjusting and gauging spark plugs, distributor points and valve clearances, or any other instance of measuring the space between two parts. This 26 leaf gage features straight leaves etched with both Metric and English units, ranging from .0015" to .025" and .037mm to .635mm. Leaves are 3" long and 1/2" wide. The set is housed in a protective holder to preserve the trueness of the leaf edges.
Stanley 30-464 Measuring Tape Stanley 30-454 Measuring Tape Stanley 46-012 Combination Square
High impact, high-visibility yellow case stands, High-contrast blade for easy readability with a 7' standout. High impact, high visibility yellow case with high-contrast blade for easy readability. Three-rivet, corrosion-resistant hook moves to allow accurate inside/outside measurements; 7' standout. Embossed hard-chrome blade is coated to resist rust. Easy-to-read vial. Lightweight, plastic handle.
Powerlock 33-116 Measuring Tape Stanley 47-973 Plumb Bob Ch Hanson 16000 Barricade Tape
Entire blade coated with Mylar polyester film for durability. Heat treated spring stands up to repeated usage, positive blade lock won't creep, graduated in 16ths of an inch. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Belt clip on back of case. Polished lacquer, solid brass construction with replaceable, hardened steel tip. Screw top simplifies attaching string to center of plumb and thru hole ensures easy tightening; durable and rust resistant. Heavy duty vinyl with 2" black characters (CAUTION) on 3" wide yellow tape.
General Tools 132ME Nib Pocket Caliper Stanley 30-305 High Visibility Tape Rule Johnson J48 Straight Edge Measuring Rule
Delivers accurate measurements up to 1/32". The stainless steel body delivers both Metric and English readings of inside and outside measurements. There is also a decimal equivalents chart printed on the back side for help with calculations. Etched and filled black graduations. Stanley Tape Rule, High Visibility, SAE Measuring System, 25 ft Blade Length, 1 in Blade Width, Steel Blade, Polymer Coated Blade, Yellow With Black/Red Markings Blade, Graduations: 1/32 in First 12, 1/16 in Thereafter, 16 and 19.2 in Stud Markings, 8 ft Standout, Automatic Rewind, Top Forward Locking, 3 Rivet Hook, Closed Case, ABS Case Made of flexible and strong tempered aluminum with a permanently anodized finish. Screen printed black, thermal-bonded graduations in 1/8 and 1/16" on both edges and can be read from either end.
Kapro 929 Kapro Torpedo Levels Mutual 15903-41 Perimeter Marker Stanley 43-511 Shock Resistant Torpedo Level
10" level featuring Plumb Site Dual-view cylindrical vertical vial; 2 easy-to-read vials (horizontal and 45 degree); leveling ledge for tiles/stills; V-groove magnetic strip; tough internal aluminum frame. This marker is required by OSHA for perimeter marking of any above ground construction area, flat roof jobs, and open upper-level construction. Perimeter Marker is 105 ft in length and exceeds the 500 lb required breakstrength. Heavy duty aluminum frame; Bi-material body with rubber ends for shock absorption and non-marring feet. Pipe groove makes it a good choice for use on rounded surfaces. Magnetic strip allows for hands free operation on metal surfaces. Water resistant for use in wet or humid conditions.
General Tools 17 Square Head Protractor Structo Cast 7700 I-Beam Level Powerlock 33-425 Measuring Tape
Made of ground stainless steel for optimum accuracy. Permanently etched graduations from 0 degree to 180 degrees in opposite directions. Adjustable 6" protractor arm locks into desired position with knurled thumb nut with 3-3/8" x 2" head. One-piece with closed end, lightweight, high-impact, foam-mold polystyrene construction.  Large, highly visible 3-position vials with snap-on black vial covers; easy to replace.  High visibility Glo frame with convenient hand holes. Easy readability, 7' standout, secure blade lock won?t creep. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Entire blade coated with Mylar polyester film for added durability, heat-treated spring stands up to repeated use, 16" and 19.2" stud center markings. Three-rivet, corrosion-resistant hook moves for accurate inside/outside measurements.
Powerlock 33-158 Measuring Tape Stanley 30-495 Measuring Tape Johnson CS2 Professional Framing Square
Entire blade coated with Myla polyester film. Heat treated spring stands up to repeated usage, positive blade lock won?t creep, graduated in 16ths of an inch. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Belt clip on back of case. High impact, high-visibility yellow case stands, High-contrast blade for easy readability with a 7' standout. Steel construction with clear, anti-rust coating that will not rust or corrode. Permanently stamped numbers and 1/8", 1/10", 1/16" graduations; board foot tables and rafter tables. Used in general carpentry and for laying out rafters and stair stringers.
Powerlock 33-212 Measuring Tape LeverLock 30-825 Measuring Tape LeverLock 30-810 Measuring Tape
Entire blade coated with heavy-duty Mylar polyester film for unbeatable durability. Two-rivet, corrosion-resistant hook stands up to continuous use. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Die cast metal case. Power return feature, with automatic bottom lock, streamlines tape operation. Yellow, high visibility case with belt clip on back. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Polymer coating and heat-treated spring extend life. Power return feature, with automatic bottom lock, streamlines tape operation. Yellow, high visibility case with belt clip on back. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Polymer coating and heat-treated spring extend life.
Johnson 4500M Magnetic Torpedo Level Quick Square 46-067 Square Layout Tool Stanley 42-264 Magnetic Top Reading Torpedo Level
Strong solid aluminum frame with V-groove frame fits on pipe and conduit, and magnetic edge that holds to ferrous metal surfaces. "SurroundView" vial surrounds enhance readability. Functions as a saw guide, for special angle measurements and cuts, or as a protractor. Aluminum construction for durability. Includes: detailed instruction book. High-impact plastic; top reading feature allows visibility from above; tinted 360 degree vials make reading easy on the eyes.
SQUARE STEEL FRAME 16X24IN    TAPE MEASURE COMPACT 16FT     Johnson 750 Pitch and Slope Locator
TAPE MEASURE COMPACT 16FT
Our Price : $9.99
"EZRead" permanent thermal bonded numbers and 1/8", 1/10", 1/12", 1/16" graduations;octagon scales, rafter tables and board foot tables; rugged steel construction with low glare, anti-rust coating. Nylon bond blade protection; 5-point reinforced frame; fractional scale; optimized hood designed for scoring; stamped steel belt clip; lanyard ready. Made of durable ABS plastic; used to obtain or transfer any angle or pitch. Reads 0 to 90 degrees in 2 quadrants. Reads pitch or slope in inches per foot; printed scale to read pitch in inch rise per 12" run without the use of conversion tables.
General Tools 16ME Pocket Rule and Gage Swanson AE142 Straight Edge Measuring Rule Stanley 34-103 Measuring Tape
Five distinct features including a Drill Point Gage, Bevel Protractor, Center Finder, Circle Divider and a Tap and Drill Table. Made from heavy duty stainless steel and also includes a 4" rule with etched graduations in 64ths and millimeters. All Straight Edges are made of high-grade aluminum alloy with high visibility, thermally fused, yellow powder paint finish. Lightweight and strong, with black; thermo-bonded gradations and non-glare finish. High impact, high visibility, yellow ABS case houses thick, wide yellow blade coated with polymer for enhanced durability; easy-to-read markings. Easy-wind drum ensures streamlined usage. End hook recoils neatly into contoured case.
Lufkin Red End 066F Flat Reading Folding Rule Swanson Speed S0101 Pocket Square Irwin 1794475 Sliding T-Bevel
Marked both sides, both edges. Graduated to 1/16ths both edges; 16" stud centers marked in red. Regular outside markings. For rules with inside markings, numbering begins on inside of rule with measurement laying close to work. Five tools in one: a tri-square, a miter square, a protractor, a line scriber, and a saw guide. The Speed Square is constructed of durable heavy-gauge aluminum alloy. Includes markings for Swanson's One-Number Method of rafter layout, and is packaged with the Swanson Blue Book of Rafter Length and Roof Construction. Matte finish to prevent glare. Used as a depth gauge and for transferring angles.
Lufkin 700 Measuring Tape True Blue EM81 Magnetic Torpedo Level Lufkin L625/L525 One Side Measuring Tape
Automatic blade lock holds the blade in extended position. Orange ABS case with a non-slip co-molded rubber grip, steel reinforced end hook, durable clear coat blade protection and recessed lock release. Heavy duty extruded aluminum frame with powerful, V-grooved working edge that fits on pipe or conduit and full length magnetic edge. True Blue vials are accurate to within 0.0005" per inch in all 10 level and plumb working positions. Lightweight, contour grip, Hi-Viz orange case is easy to find and fits comfortably in hand. Slide lock design allows for easy control of tape blade, wide base helps keep tape standing upright, removable belt clip and easy-to-read yellow clad blade (not replaceable).
Lufkin 2000 Measuring Tape Johnson Structo Cast RAS-170B-ORA Combination Square Stanley 50 Electronic Stud Sensor
Case designed to fit perfectly in the hand. Lightweight, high strength chrome finished case; fits easily into most tape holsters with removable belt clip. Bright yellow blade has clear easy-to-read numerals. Toggle lock positioned for convenient operation, holds blade securely, cushioned blade return. Durable, light weight "Structo-Cast" high-impact molded frame with permanent molded graduations for quick and easy measurements,  thick edge is useful as a saw guide, built-in scribe notches. Fluorescent orange color is easy-to see. Pocket-size stud sensor detects wood/metal studs up to a 3/4" depth. Easy visual indicators on face of stud sensor for easy readability; LED display and buzzer indicates stud edge.
Lufkin Two Way Red End 966N Folding Rule Stanley 42-465 Magnetic Torpedo Level Johnson 406EM Professional Combination Square
For measuring left to right, right to left. Marked both sides. Graduated in feet, inches and 1/16ths on both sides and both edges. Flat inside markings lie close to the work. Durable, heavy duty, cast aluminum frame with pipe groove for use on rounded surfaces. Magnetic strip allows hands free operation on metal surfaces. Tinted 360 degree vials make reading easy on the eyes. Stainless steel blade with permanently stamped graduations 1/8", 1/16", 1/32", mm. Heavy-duty cast zinc head with black, chip-resistant e-coating finish. CNC machined square head for greater accuracy. Reversible head with lock bolt and steel screw. Hardened, screw-in scriber won't fall out. Durable acrylic level vial. "Auto-Lock" blade assembly.
Swanson Speed T0101 Square General Tools 729 Nib Pocket Caliper Lufkin PQR1316 Measuring Tape
Five tools in one: a tri-square, a miter square, a protractor, a line scriber, and a saw guide. The Speed Square is constructed of durable heavy-gauge aluminum alloy. Includes markings for Swanson's One-Number Method of rafter layout, and is packaged with the Swanson Blue Book of Rafter Length and Roof Construction. Matte finish to prevent glare. Delivers the same accuracy and precision as some larger models. Compact, stainless steel construction these Slide Calipers provide inside and outside readings in both 1/16" and 1mm graduations. In addition, there is a decimal equivalents chart on the caliper?s back side for help in making measurement calculations. Etched and filled black graduations. Graduations printed in fractions and decimal equivalents. Rounded blue ABS case fits your hand for comfort and withstands rugged use on the job site. Positive toggle lock holds blade securely at any length. Self-compensating end hook for inside and outside measurements. Built in bumper reduces shock when blade is retracted.
Swanson TC132 Combination Square LEVEL IBEAM 24IN 180 SER ALUM Max 33-279 Measuring Tape
Precision machined die-cast zinc body with an impact-resistant acrylic level vial and a brass scriber. Also acts as a depth gauge, and has 45 and 90 degree working surfaces. Black precision etchings, brass hardware. 180-degree rotating vial for a range of situations; measuring scale printed directly on the level eases layout work; heavy-duty aluminum I-beam construction provides rigidity and accuracy; level accuracy of 0.0015" (0.15mm/m); 360-degree vials set directly into frame never need adjustment. Durable bi-material case with slip resistant rubber over mold with belt clip on back of case. AirLock rubber slide lock, multi-catch hook,Tru-Zero hook with nail head slot. Accurate interior and exterior measuring with large, easy to read blade graphics, nail slot for measuring radius, 10' blade standout.
C.H. Hanson 03040 Magnetic Stud Finder Powerlock 33-215 Measuring Tape LEVEL I-BEAM ALUMINUM 18IN
Small and compact, easily fits in pocket; uses powerful rare earth magnets to pinpoint the exact location of screws or nails in a stud and allows hands free use; 2 way level for ease of marking; soft grip for easy grabbing and gentle touch, no batteries required. Die-cast metal case holds its own against rough handling; entire blade coated with heavy-duty "Mylar" polyester film for unbeatable durability; two-rivet, corrosion-resistant hook stands up to continuous use; special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Aluminum frame with "Quik-Change" replaceable vial covers. Impact resistant acrylic vials assure accuracy; V-Groove edge.
LEVEL TORPEDO MAG ALUM 12IN   Lufkin 700 Measuring Tape Lufkin 524N Doyle Log Scale Folding Rule
Magnetic working edge allows for hands-free use on ferrous metal surfaces; oversized aluminum reinforced frame; "SurroundView" vials reflect ambient light for easy-read; V-groove frame fits on pipe and conduit; top-read window for easy viewing; tapered design fits in tool pouch or pocket. Magnetic end hook is a time-saver for framers, HVAC installers, and more. Powerful dual magnets can also serve as a pick-up tool. Orange with a non-slip, co-molded rubber grip, ABS case stands up to the toughest work site. Non-slip rubber blade lock button. Use for one-man measurements of steel framing and drop ceiling grids. Designed for estimating board feet in a cut log. Graduated inches to 1/16ths lower edge. Outside markings for 10 and 18' logs; inside markings for 12, 14 and 16' logs.
Irwin 1794473 Tri and Mitre Square LeverLock 30-830 Measuring Tape Kapro 150-81-24 I-Beam Level
Used as a measurement tool and for marking 90 degrees. Rust proof stainless steel blade. Black precision etched scales. High impact ABS handle. Power return feature, with automatic bottom lock, streamlines tape operation. Yellow, high visibility case with belt clip on back. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Polymer coating and heat-treated spring extend life. A sleek looking, sturdy I Beam level with added unique Plumbsite Dual View Vial feature; one plumb site dual-view vial,  two horizontal cylindrical vials, V-Groove base for leveling pipes; sturdy aluminum frame.
Johnson 400 Professional Combination Square With Scriber Lufkin P1000 Measuring Tape Zircon International 62168 Stud Sensor
Stainless steel blade with permanently graduations 1/8", 1/16", 1/32" with a heavy-duty cast iron head with black finish. Reversible head with lock bolt and steel screw. Hardened, screw-in scriber won't fall out. Durable acrylic level vial. "Auto-Lock" blade assembly. Lightweight, high strength, Hi-Viz orange case easy to find on the job; fits perfectly in the hand and into most tape holsters. Bright yellow blade has clear easy-to-read numerals with cushioned blade return. Removable belt clip. Toggle lock is positioned for convenient operation and holds the blade securely. Locates the wood or metal studs up to 3/4" deep. Red LEDs light up every time a stud edge is approached. An audio alert and green LED signals when the stud edge is reached. Should scanning begin over a stud, over-the-stud indicator alerts the user to start the scan in a new location. "TruCal"  technology calibrates to any wall's density and a steady green LED "TruCal" light alerts the user when the tool is calibrated and ready to scan.
Stanley 45-300 Carpenter Square Stanley 47-974 Plumb Bob Quick Square 46-071 Square Layout Tool
High-quality aluminum for maximum durability. Protective lacquered coating resists corrosion. Durable black embossed graduations and figures for easy reading. Provides helpful reference conversion tables such as new lumber scale, decimal equivalent table, metric conversion table, formula for squaring a foundation, 45, 60 and 30 degree angle markings, volume and area formulas, wood screw gauge table, nail sizes (common and finish), quantity per pound and depth scale. Polished lacquer, solid brass construction with replaceable, hardened steel tip. Screw top simplifies attaching string to center of plumb and thru hole ensures easy tightening; durable and rust resistant. Functions as a 0 degree to 90 degree protractor scale as well a saw guide. Durable aluminum construction with black body with yellow graduations provides maximum readability in all light conditions.
Stanley 45-910 Rafter Square Irwin 1794470 Combination Square Power Glide PG1025 Standard Measuring Tape
High tempered aluminum for maximum durability with deep and long wearing 1/8" graduations on face and back and a protective lacquered coating resists corrosion. Lumber scale, decimal equivalent table, metric conversion table, formula for squaring a foundation, 45, 60 degree,30#&176, angle markings, volume and area formulas , wood screw gauge table, nail sizes and depth scale. Tables and information imprinted on both sides of square. Rust proof stainless steel blade. Used for 90 degree and 45 degree marking, as well as marking gauge for transferring measurements. Black precision etched scales. Chrome-coated, high impact ABS case with rubber grip for increased durability, high impact resistance and better blade protection. The nylon-coated blades provide extended blade life and increased readability. The true-zero, 3-riveted hook offers superior strength. The positive blade lock and reverse button are standard. All have a handy belt-clip.
TAPE MEASURE 25FT CHROME      TAPE MEASURE 16FT PREMIUM     LEVEL W/RULE ALUMINUM 24IN
TAPE MEASURE 25FT CHROME
Our Price : $13.99
TAPE MEASURE 16FT PREMIUM
Our Price : $13.99
LEVEL W/RULE ALUMINUM 24IN
Our Price : $13.99
Has lots of great features that make it easy for professionals and DIYers to take accurate measurements; with a chrome plated case and a polymer coated blade, you are ensured years of heavy duty use. This tape offers 7' standout; it has a multi-catch hook for versatility with a Tru-Zero hook for accurate inside and outside measurements. Rugged rubber over-mold for impact resistance; 10' Blade Standout for reach and efficiency; Tylon blade coating for durability and long blade life; "Tru-Zero" end hook for accurate measurements; high impact case design for durability. Features an extruded aluminum frame with anodized finish. Convenient ruled edge screen printed on one side. Top read window allows for easy viewing. 3 durable acrylic vials. Protective end-caps. Ideal level for general around-the-house projects and light construction uses.
Stanley 42-470 I-Beam Level Lufkin FE050 Open Reel Measuring Tape Empire E280 Professional Combination Square
Durable, shock-resistant ABS construction. Top read center vial designed for instant readability. Measuring scale adds utility. Non marring material will not damage finished surfaces. High visibility yellow is easy to spot on the job site. Open four arm frame design protects blade, does not trap dirt in case. Lightweight, strong, easy to handle and rewind, orange case is easy to find and two material grip is comfortable to use. Yellow clad fiberglass blade impervious to moisture. Folding end hook for true-zero measurements. Feet and inches graduated to 8ths; numbered feet and instantaneous feet. Precision machined head and true blue vials ensure squareness to .001. Etched stainless steel blade with inch graduations. Heavy-duty machined square head. Self-aligning drawbolt, hardened scriber.
Powerlock 33-516 Measuring Tape Stanley 34-790 Open Reel Measuring Tape Powerlock 33-428 Measuring Tape
Metallic ABS case has a wear plate that protects case from cuts and nicks. BladeArmor coating on the first 6" maximizes durability of hook end, Mylar polyester film extends life of entire blade and improves measurement visibility. Forward blade lock design simplifies locking and unlocking the blade, wide blade for easy readability. Three-rivet, corrosion-resistant hook moves for accurate inside/outside measurements, 16" and 19.2" stud center markings simplify framing jobs, 8' tape standout. PVC blades allow tape to be wound wet and easily cleaned. High impact ABS case for durability, wide blade with easy-to-read fractional/decimal, inch/foot  markings. English formats for versatility. Rubber grip is designed with comfort in mind, easy to find yellow color. Entire blade coated with Mylar polyester film for durability. Heat treated spring stands up to repeated use; 16" and 19.2" stud center markings. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Three rivet, corrosion-resistant hook moves for accurate inside/outside measurements, secure blade lock won?t creep, 7' standout.
Stanley 34-106 Measuring Tape Johnson CS5 Professional Framing Square Johnson 108 Plumb Bob
High impact, high visibility, yellow ABS case houses thick, wide yellow blade coated with polymer for enhanced durability; easy-to-read markings. Easy-wind drum ensures streamlined usage. End hook recoils neatly into contoured case. Aluminum construction with anodized finish will not rust or corrode. Permanently stamped numbers and graduations in 1/8", 1/10", 1/12" and 1/16"; octagon scales, rafter tables and board foot tables. Used in general carpentry and for laying out rafters and stair stringers. CS7 features laser etched EZ Read graduations and numbers on black anodized body. For finding a plumb (vertical) line over a long distance. High quality plated brass, lacquered with replaceable hardened tips. Removable cap for quick, easy and accurate centered string installation.
Stanley 46-222 Combination Square Powerlock 33-430 Measuring Tape Zircon International 61897 Stud Sensor
Embossed hard-chrome blade is coated to resist rust. Built-in scriber comes in handy for surface marking. Easy-to-read vial. Durable, black die-cast metal handle. Easy readability, 7' standout, secure blade lock won?t creep. Special Tru-Zero hook does double-duty as a pivot for drawing circles and arcs. Entire blade coated with Mylar polyester film for added durability, heat-treated spring stands up to repeated use, 16" and 19.2" stud center markings. Three-rivet, corrosion-resistant hook moves for accurate inside/outside measurements. Locates wood and metal studs up to 3/4" behind drywall. The "SpotLite Pointing System" shines a beam of light on the wall to identify the target. Red LEDs light up every time a stud edge is approached. SpotLite Pointing System, an audio alert, and a green LED signals when the stud edge is reached. Should scanning begin over a stud, the over-the-stud indicator alerts the user to start the scan in a new location. TruCal technology calibrates to any wall's density and a steady green LED TruCal light alerts the user.
   
 
1 2 3