Home > GENERAL HARDWARE > SHELVING & CLOSET
Sort By:
1 2 3
SCREW BRCKT ZINC PLATED       SCREW BRCKT FRTWD 12PK        BRACKET SHELF ANT BRNZ
SHELF BRACKETS ANT BRNZ
Our Price : $1.79
For brackets. #7 x 3/4? & 1-1/4?. Visual-pack. Designed to attach National model No. 211 brackets to walls and shelves. 6 each No. 7 x 1-1/2" and 6 each No. 7 x 1/2" per pack. Visual-pack. Designed for mounting National's #152 brackets. Phillips truss screws, 4 each of 7 x 1/2 and 7 x 1-1/2 inch. Visual-pack.
BRACKET SHELF ANT BLACK       SuperSlide 948 Pre-Loaded Wall Bracket SuperSlide 5629 Closet Rod Support
SHELF BRACKETS ANT BLK
Our Price : $1.79
Designed for mounting National's #152 brackets. Phillips truss screws, 4 each of 7 x 1/2 and 7 x 1-1/2 inch. Visual-pack. Secures shelf to side wall of closet. Pre-loaded with pins and anchors, no screws needed. Accommodates pole clips and shelf stops in "TotalSlide" system. SuperSlide shelving and hardware allows hangers to slide freely on both Fixed Mount and ShelfTrack mounting systems. Hangers slide without interruption. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin
Closetmaid 01016 End Cap SCREW BRCKT BLACK 12PK        Knape & Vogt 255 Adjustable Shelf Standard
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. Designed to attach National model No. 211 brackets to walls and shelves. 6 each No. 7 x 1-1/2" and 6 each No. 7 x 1/2" per pack. Visual-pack. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Prime Line N 6568 Pole Socket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Accepts a 1-3/8" diameter standard wood pole. 2-3/16"OD x 3/4" overall. Includes one pair of pole sockets and two No.8 x 3/4" Phillips flat head screws.
Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt PK255 BR 36 Standard Pilaster Knape & Vogt BK-0101 Shelf Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Designed to fit into the fast mount standards, load tested to 100 lbs.
Knape & Vogt CD-0019 Closet Pole End Cap Prime Line U 9335 Spoon Shelf Support Peg Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
Covers up pole ends, keeps hangers from sliding off, friction fit. For use with 1-1/4" diameter pole (except 0023 uses 1" diameter pole). For use with cabinets and storage cabinets with glass shelves. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 80-88D PWH Standard Shelf Screw Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket
Screws are 1-1/2" long with a #8 body and #6 head. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt 255 Standard Pilaster Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt CD-0242-PM Wall Mount Shelf Standard SuperSlide 5655 Closet Rod Support Knape & Vogt 80-88DP ANO Standard Shelf Screw
Screw pack for heavyweight wall standard, (14) 2-1/2" Screws. Converts shelf & rod shelving to a continous slide. Hang rod snaps into bracket to create an continuous slide for hangers. Snaps onto SuperSlide shelf to support hang rod. Use one every 36 in. (91,44cm) of hang rod and at each end of shelf and hang rod. 5.75"H x 0.87"W x 3.87"D. Material: Resin. Screws are 1-1/2" long with a #8 body and #6 head.
SUPPORT ROD CLOSET ZINC PLATED Knape & Vogt 180 Regular Duty Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket
Used to support adjustable closet rods. Includes fasteners. Safe working load: 40 lbs. Visual-pack. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA.
Knape & Vogt PK255 BR 48 Standard Pilaster Knape & Vogt 255 Adjustable Shelf Standard Knape & Vogt 255 Standard Pilaster
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Mintcraft 25211PHL Single Slot Shelf Standard Closetmaid 6610 Wall Clip SuperSlide 6609 Pre-Loaded Wall Bracket
Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged. Anchors shelf to wall. Ensures stability of shelf. Heavy duty preloaded wall bracket with anchor, mounts to the side wall and holds the end of the SuperSlide shelf and Hang Rod. Supports front lip of shelving and hang rod where they meet the side wall. With pre-loaded pins. For drywall installations. 4.125"H x 1.75"W x 2"D. Material: Resin.
Prime Line U 9337 Spoon Shelf Support Peg Slim-Line 215 Decorative Regular Duty Shelf L-Bracket Knape & Vogt 182 Adjustable Twin Slot Bracket
For use with cabinets and storage cabinets with glass shelves. Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt 255 Adjustable Shelf Standard Knape & Vogt RP-0044-BWT Non-Adjustable Shelf and Rod Bracket Knape & Vogt BC-0038-HD Closet Pole Socket
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature. For 1-1/4" diameter closet poles. Fits up to 1-3/8" diameter. Mounting screws included.
Knape & Vogt CD-0104 Fast Mount Hook SUPPORT TAN                   Knape & Vogt 82 WH 16.5 Shelf Standard
SUPPORT TAN
Our Price : $3.49
Hook hangs fast-mount track from top of basement wall. No screws required. Load tested up to 1,000 lbs per hook. 1/4" diameter shank. Safe working load (SWL) 25 lbs. Features twice the slots for more strength. Two 10-1/2" brackets mounted to twin-slotted standards support up to 300 pounds per shelf when installed according to manufacturer's directions.
Knape & Vogt 182 Twin Slot Bracket Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 80 BLK 24 Regular Duty Single Slot Shelf Standard
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 180 Series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight-bearing support. Fully adjustable 1" increments. 16-gauge steel construction. Dimension 5/8" wide x 13/32" high x selected length.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 180 Regular Duty Shelf Bracket Prime Line U 9116 Spoon Shelf Support Peg
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. For use with cabinets and storage cabinets with glass shelves.
Prime Line U 9150 Spoon Shelf Support Peg Prime Line N 6794 Rod Holder Closet Pole Socket Knape & Vogt CD-0105 Phillips Flat Head Screw Pack
For use with cabinets and storage cabinets with glass shelves. Fits up to 1-3/8" in diameter. Includes one pair of pole sockets with fasteners. Durable zinc finish. Phillips flat head, 14 pack. Use with #0100 fast mount wall standards. Supports 200 Lbs. per screw.
Knape & Vogt CD-0106 Joist Bracket Knape & Vogt CD-5934-WT Screw Set Knape & Vogt 256PZC Adjustable Pilaster Shelf Support
Durable, use to install fast mount wall standards over finish wall without fastening wall standard to wall. Fastens to stud wall header plate. Use with #0100 fast mount wall standards. Supports 600 Lbs. Per Bracket. Zinc clad for shelf and rod brackets. Contains: 2 each 1.5" x #10 screws for mounting bracket to wall and 2 each .75" x #8 screws for mounting shelf to bracket. Phillips head Screws. Snaps securely into place. For use with No. 233 and No. 255. High strength steel.
Knape & Vogt 180 Boltless Regular Duty Shelf Bracket Knape & Vogt 335P PLAS Shelf Support Pin Knape & Vogt 182 Adjustable Twin Slot Bracket
For use with the 80 Series standards. For shelving applications in light industrial, commercial, and residential use. Standards can be mounted to nearly any type of wall. For storage and display applications in retail stores, grocery stores, light warehouses, repair garages, maintenance storage, business office storage, and residential storage. Reinforced brackets lock into slotted standards for strong, secure weight-bearing support. Fully adjustable in 1" increments. 16-gauge cold rolled steel construction. Tested to meet or exceed ANSI performance standards as established by BHMA. 1/4" diameter x 7/16"L pin. Polybagged. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
BRACKET SUPPORT SHOE SHELF WHT Closetmaid 1002 Joiner Plate SUPPORT ROD CLOSET WHITE
CLOSET ROD SUPPORTS WHT
Our Price : $3.79
For wire shelving, converts almost any wire shelf to a shoe shelf. Make a shoe shelf by inverting shelf, lip facing up. Holds shoes away from wall at an angle. Use 1 shoe support bracket every 24 in. Does not work with Close Mesh shelving. 6.125"H x 1.25"W x 4.75"D. Use to join 2 shelves together to create a continuous run of shelving. Supports the joining of 2 wire shelves. One set consists of 2 joiner plates, 1 bolt and 1 nut. NOT for use with Close Mesh shelving. 1.19?H x 2.25?W x 1.13?D. Material: Resin. Used to support adjustable closet rods. Includes fasteners. Safe working load: 40 lbs. Visual-pack.
Knape & Vogt PK255 ZC 60 Standard Pilaster Prime Line U 9302 Shelf Support Peg SuperSlide 75651 Closet Rod Connector
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. 3mm diameter peg and support a maximum safe load of 10 lb. Used to support cabinet shelves. Use with SuperSlide shelving to create uninterrupted sliding action around corners for walk-in closets. Keeps hangers from sliding off exposed ends. Support the connection of the two pieces of hang rod with a hang bar support. 2"H x 0.5"W x 0.5"D. Material: Plastic.
Knape & Vogt 182 Adjustable Twin Slot Bracket Mintcraft 25212PHL Single Slot Shelf Standard Knape & Vogt 182 Twin Slot Bracket
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt PK255 BR 72 Standard Pilaster Closetmaid 6620 Wall Bracket Knape & Vogt 255 Standard Pilaster
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. Heavy duty preloaded bracket with anchor easily mounts to the wall and holds the end of any size ClosetMaid shelf. Provides side wall support. Supports front lip of shelving where it meets the side wall. For drywall installations. Includes: 2.875"H x 2.125"W x 1.75"D. Material: Resin. Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep.
Knape & Vogt 255 Standard Pilaster Prime Line U 9147 Shelf Support Peg Knape & Vogt 182 Twin Slot Bracket
Pilasters for built-in shelving and book case applications. Adjustable on 1/2" centers. 23 gauge high-strength steel, 5/8" wide x 3/16" deep. 1/4" diameter peg and support a maximum safe load of 5 lb. Used to support cabinet shelves. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt RP-0046-WT Shelf and Rod Bracket SCREW WOODGRAIN NO4X5/8IN     SCREW SILVER NO4X5/8IN
SCREWS #4X5/8IN WOODGRAIN
Our Price : $4.29
SCREWS #4X5/8IN SILVER
Our Price : $4.29
Holds up to 500 lb. per pair.  For 12" deep shelf. 5/8" x #4 screws. Visual-pack. 5/8" x #4 screws. Visual-pack.
Slim-Line 215 Decorative Regular Duty Shelf L-Bracket Knape & Vogt 256 Adjustable Dimple Pilaster Support Knape & Vogt Designer 182 Shelf Bracket
Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive. Snaps securely into place. For use with No. 233 and No. 255. High strength steel. Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches.
Knape & Vogt RP-0043-WT Adjustable Shelf and Rod Bracket Knape & Vogt BK-0102 Shelf Bracket Knape & Vogt CD-0047 Carded Screw and Cap Set
For 11" - 14" deep shelves and rods up to 1-3/8" diameter. Slide thru and snap-in pole features. Designed to fit into the fast mount standards. Load tested to 150 lbs. Mounts 2 brackets and 1 pole. Caps cover mounting screws. Carded.
Closetmaid 1180 Support Bracket SuperSlide 6641 Wall Bracket Closetmaid 1001 Corner Support Bracket
Closetmaid Support Bracket, 12 in Length, 2 in Width, 2 in Depth, Steel, Epoxy Coated, White, Suitable For Use With: Wire Shelving, Includes: (1) Support Bracket, (1) Anchor, (1) NO 8 Pin Supports low profile SuperSlide shelving in a wall to wall installation. Includes: 2 wall brackets, 4 pins and 4 anchors. Use in conjunction with support brackets and wall clips for installing wire shelving. Suports front lip of shelving where it meets the side wall. 2"H x 2.19W x 1.75"D. Material: Resin Supports front lip of shelving to keep it level where it meets another shelf in a corner. Snap in place design. For corner installations.  0.375?H x 5?W x 0.75?D. Material: steel, coated with epoxy.
Knape & Vogt Designer 182 Shelf Bracket Knape & Vogt 345 Shelf Support Knape & Vogt 345 Shelf Support
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack. For 5 mm drilled holes. Use with No.129 rubber cushion. 4.7 mm diameter x 5/16" L pin. Poly pack.
Knape & Vogt Designer 182 Shelf Bracket Knape & Vogt RP-0045-WT Non-Adjustable Shelf and Rod Bracket Knape & Vogt BK-0103-11 Shelf Bracket
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. For 11" - 18" deep shelves and rods up to 1-3/8" diameter. Slide-thru feature. With fold out support for heavy duty loads. Load tested to 300 lbs.
Knape & Vogt 346 Shelf Support Knape & Vogt 346P BR Shelf Support Knape & Vogt 255-81N ZC Nail 8 in L
Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin. Use with No. 129 rubber cushion. For 1/4" diameter holes x 3/8"L pin. For use with 255/233 zinc, 255 galvanized and 255 almond.
Mintcraft 25213PHL Single Slot Shelf Standard Knape & Vogt BK-0102-14 Shelf Bracket Knape & Vogt 0202-10PM Shelf Standard
Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged. Designed to fit into the fast mount standards. Load tested to 150 lbs. Knape & Vogt Shelf Standard, Heavy Duty, 10 in Length, 4.88 in Width, 3.88 in Depth
Knape & Vogt 7980WH Standard Hang Rail Link Knape & Vogt 0111-40 Horizontal Fast Mount Hang Track SuperSlide 75638 Closet Rod End Cap
Attaches to the top end of an 80 series wall standard to allow it to be hung on an installation hang rail. Packaged per pair with two links and two screws. Horizontal track to hang uprights, load tested to 400 lb. per screw on wall studs. Tested to 100 lb. per anchor on dry wall mount. For use with ClosetMaid, SuperSlide wire shelving. Prevents hangers from sliding off end of closet hang rod. Insert into end of the hang rod.Two end caps per package. 0.5"H x 0.5"W x 0.5"D. Material: Resin.
Mintcraft 25202PHL Shelf Standard Knape & Vogt 7980TI Standard Hang Rail Link Closetmaid 26607 Support Bracket
Adjustable dual track. 1pc. Dimensions: 1" H x 5/8: W x 25-1/2"L. For use with ProSource shelving. UPC tagged. Attaches to the top end of an 80 series wall standard to allow it to be hung on an installation hang rail. Packaged per pair with two links and two screws. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Slim-Line 215 Decorative Regular Duty Shelf L-Bracket Knape & Vogt BK-0103-14 Shelf Bracket Closetmaid 7561 U-Shape Shelf Clip
Made of heavy-duty steel covered with high-impact plastic. Italian design. Functional and attractive. With fold out support for heavy duty loads. Load tested to 300 lbs. Attaches to the back of shelving to anchor shelf to back wall. Shelf clip "locks" shelving into place - attaching it at the top and bottom of shelf wire with or instead of wall clips. For concrete/stud and drywall installation. Material: Metal.
Knape & Vogt 0202-14PM Shelf Standard Knape & Vogt 0018-4WT3 1-Piece 3 Pole Closet Rod ShelfTrack 2853 Shelf Bracket
Knape & Vogt Shelf Standard, Heavy Duty, 14 in Length, 4.88 in Width, 3.88 in Depth 1-1/4" Diameter. For use with ShelfTrack system. Locks the wire shelf to the vertical wall standard for added safety. Keeps shelves from being pushed up and unlocked accidentally. Works with ventilated shelving. 1/2" width.
Knape & Vogt RP0022-18/30 Adjustable Closet Rod Closetmaid 7546 Down Clip/Anchor Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket
1-1/4" diameter. Attaches to the back of shelving to anchor shelf to back wall. For concrete/stud and drywall installation. Package includes 12 clips, 12 anchors and 12 #8 screws. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners.
Knape & Vogt 7982WH Standard Link Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket Knape & Vogt 80 BLK 72 Regular Duty Single Slot Shelf Standard
Attaches to the top end of an 82 series wall standard to allow it to be hung on an installation hang rail. Hold up to 900 lbs per pair (when installed on 16" stud centers). Packaged in pairs with two links and two screws. Polybagged. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. For use with the 180 Series brackets. Standards can be mounted to nearly any type of wall. Reinforced brackets lock into slotted standard for strong, secure weight-bearing support. Fully adjustable 1" increments. 16-gauge steel construction. Dimension 5/8" wide x 13/32" high x selected length.
Knape & Vogt 7982TIMTX Matrix Standard Link Knape & Vogt 256 Adjustable Dimple Pilaster Support Knape & Vogt 208 Extra Ultimate L-Bracket
Attaches to the top end of an 82 series wall standard to allow it to be hung on an installation hang rail. Hold up to 900 lbs per pair (when installed on 16" stud centers). Packaged in pairs with two links and two screws. Polybagged. Snaps securely into place. For use with No. 233 and No. 255. High strength steel. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners.
Knape & Vogt 255 Pilaster Nail ROD CLOSET BRT 18-30IN        Closetmaid 6606 Support Bracket
For use with 255/233 zinc, 255 galvanized and 255 almond. Used to hang clothes and other items. Tubes are made with lock seam construction for strength.  Ends align for easy installation. Visual-pack. Preloaded with #8 pin drive and anchors. No.6606, 71925 and No. 21775. - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 12" in depth; and Wardrobe or hanging SuperSlide shelves 16" in depth. No. 26607, 71924, and No.21776 - For Organizer, SuperSlide (in storage application), and Close Mesh shelves 16" in depth. No.26605 - For Organizer, Wardrobe, SuperSlide and Close Mesh Shelves 20" in depth.
Knape & Vogt Designer 182 Shelf Bracket Waddell 1351 Shelf Bracket Knape & Vogt RP0021-18/30 Adjustable Closet Rod
Double-lug bracket design prevents shelves and contents from falling when bumped. Supports adjust to accommodate changes in storage and layout. Rounded corners and recessed groove design. Cover strips conceal screw holes and slots for a more refined appearance. Epoxy finish is resistant to chips and scratches. 3/4" thick, with wall anchors. No. 1350 - For shelves up to 6". No. 1351 - For shelves up to 8". No. 1352 - For shelves up to 10". No. 1353 - For shelves up to 12". 1-1/4" diameter. White finish.
Closetmaid 7540 Small End Cap Knape & Vogt 208 Extra Ultimate L-Bracket Mintcraft 25214PHL Single Slot Shelf Standard
Vinyl end cap provides protection from cut end of wire shelving that exposes possible rough edges. Large end caps cover the large rod, 0 gauge, .25"H x .4"W x .4"D. Small end caps are for the 4 gauge wire, .2"H x .2"W x .2"D. Designed to be used with ClosetMaid - Shelf & Rod shelving. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. Single track adjustable wall standard. Dimensions: 5/8"W x 7/16"H x selected length. For use with Pro Source shelving. UPC tagged.
Homebasix 05000862P Closet Drawer Homebasix 05000862N Closet Drawer Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket
Size: 11" x 10-1/2" x 10-1/2". Size: 11" x 10-1/2" x 10-1/2". 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners.
Knape & Vogt RP-0495-WT Non-Adjustable Shelf and Rod Bracket Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket Knape & Vogt 82DPSCREWZC Screw Kit
Holds up to 500 pounds.Slide thru and snap-in pole features. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. For installation of 82 series heavy-duty standards. Includes: 6 heavy-duty screws and 6 wall anchors.
Knape & Vogt BK-0103-22 Shelf Bracket Mintcraft 25203PHL Dual Slot Shelf Standard Knape & Vogt 0203-14PM Shelf Bracket
With fold out support for heavy duty loads. Load tested to 300 lbs. Adjustable dual track. 1pc. Dimensions: 1" H x 5/8: W x 25-1/2"L. For use with ProSource shelving. UPC tagged. Wood shelf brackets hold up to 500 lbs. each. Durable platinum powder coat finish. Diamond plate stamped surface. Solid steel construction.
Knape & Vogt RP0022-30/48 Adjustable Closet Rod Prime Line N7050 Closet Pole Bracket Closetmaid 8711-17 Drawer
1-1/4" diameter. Painted diecast. Includes one pair of pole sockets and screws. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
Closetmaid 877-17 Drawer Knape & Vogt 208 Super Duty Ultimate Shelf L-Bracket Closetmaid 434-17 Drawer
Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. 3/4" steel strut and 5mm thick steel bar construction. Tough epoxy coat finish. Recommended fasteners are 3" or longer 5/16" pan head screws mounted onto studs. Attach shelf using #8 or larger rounded-head wood screw. Holds up to 1,200 pounds per pair when mounted per manufacturer recommendations. Mounts directly to wall.  Less fasteners. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
Closetmaid 786 Drawer Closetmaid 785 Drawer Closetmaid 784 Drawer
Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D. Provides storage space. Fits into most cubical storage units. Size: 11"H x 11"W x 11"D.
   
 
1 2 3