Home > GENERAL HARDWARE > CABINET & DRAWER HARDWARE
Sort By:
1 2
Amerock Allison BP802PBK Round Cabinet Knob Amerock BP3473PT Magnet Catch Amerock BP34712G Flexgrip Friction Catch
Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw. Size: 2"L x 1-1/8"W x 1/2"H; Steel Strike: 1"L x 3/4"W x 1/16"H. Polybagged. Size: 1-5/16"L x 3/4"W x 5/8"H. Polybagged.
Amerock BP347414 Double Roller Catch Amerock Allison BP3403CB Round Cabinet Knob Amerock Allison 890ABS Round Cabinet Knob
Size: 1"L x 15/16"W x 1/2"H; steel strike: 1"L x 11/16"W x 3/8"H. Polybagged. Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw. Pull with 1-1/2" diameter x 3/4" height. Use with one #8-32 x 1" type screw.
Amerock BP97143G Roller Catch Amerock Allison BP3401CB Cabinet Pull Amerock Allison BP3467AE Round Country Manor Cabinet Knob
Polybagged. Pull with 3-1/4" center, 5-1/16" length x 1" width x 3/4" height. Use with two #8-32 x 1" type screws. Knob with 1-1/16" diameter x 1" height. Use with one #8-32 x 1" type screw.
Amerock Allison BP34133 Round Modern Cabinet Knob Amerock Allison BP341326 Round Modern Cabinet Knob Amerock Allison BP3423BB Round Traditional Cabinet Knob
Use with one #8-32 x 1" type screw. Includes two different screw lengths for your convenience. Use with one #8-32 x 1" type screw. Includes two different screw lengths for your convenience. Knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw.
Amerock Allison 848LB Round Cabinet Knob Amerock Allison BP802PW Round Cabinet Knob Amerock Allison BP3443BB Round Harmony Cabinet Knob
Pull with 1-3/8" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter x 3/4" height. Use with one #8-32 x 1" type screw. Knob with 1-1/4" (32mm) diameter x 15/16" height. Use with one #8-32 x 1" type screw.
Amerock Allison BP811WD Round Cabinet Knob Amerock Allison 14403SCH Round Hollow Cabinet Knob Amerock Allison 894ABS Cabinet Pull
Unfinished wood knob. Use with one #8-32 x 1" type screw. Knob with 1-5/16" diameter x 7/8" height. Use with one #8-32 x 1" type screw. Pull with 3" center, 4-5/16" length x 7/8" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP53005G10 Round Cabinet Knob Amerock Allison BP813WD Round Cabinet Knob Amerock Allison 232WHT Round Cabinet Knob
Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Unfinished wood knob. Use with one #8-32 x 1" type screw. Height 1, use with one #8-32 x 1" type screw.
Amerock Allison BP803PW Wired Cabinet Pull Amerock Allison 69228 Round Plain Cabinet Knob PULL CABINET BRSH CHROME 3IN
Pull with 3" center, 3-5/16" length x 3/8" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Ceramic knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw. Solid brass wire pull with 3" center, 3.312" length x .375" width x 1.25" height. Use with two #8-32 x 1" type screws.
KNOB 1IN 25MM UNFINISHED      Amerock Allison BP34163 Basic Modern Cabinet Pull Amerock Allison BP341626 Basic Modern Cabinet Pull
KNOB 1IN 25MM UNFINISHED
Our Price : $1.99
PULL CABINET BRIGHT BRASS
Our Price : $2.19
Use with one #8-32 x 1" type screw. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4" length x 7/16" width x 3/4" height. Use with two #8-32 x 1" type screws.
Amerock Allison 244WPB Round Cabinet Knob Amerock Allison 255PB Round Plain Cabinet Knob Amerock Allison 253G10 Cabinet Pull
1-1/4" diameter. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter x 7/8" height. Use with one #8-32 x 1" type screw. Pull with 3" center, 4-7/8" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws.
Prime Line R 7085 Drawer Track Guide Kit Amerock Allison BP53005ORB Round Cabinet Knob Prime Line R 7084 Drawer Track Guide Kit
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Brown polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 1/4" x 7/8" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners.
Prime Line R 7152 Drawer Track Guide Kit Prime Line R 7154 Drawer Track Guide Kit Amerock BP34293 Self-Closing Variable Overlay Cabinet Hinge
Polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 1-1/8" track. Yellow polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 3/32" x 1-9/32" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H.
Amerock BP3428BB Self-Closing Cabinet Hinge Amerock Allison BP3441BB Harmony Cabinet Pull Amerock Allison BP34413 Harmony Cabinet Pull
HINGE CABINET STL 3/8IN
Our Price : $2.39
PULL CABINET BRIGHT BRASS
Our Price : $2.39
3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H. Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 3.375" length x 0.312" width x 1.125" height. Use with two #8-32 x 1" type screws.
Amerock Allison 217WHT Round Plain Cabinet Knob Prime Line R 7082 Drawer Track Guide Kit Amerock BP98232G Spring Cushion Roller Catch
Height 1, use with one #8-32 x 1" type screw. Red polyethylene guide and white polyethylene side saddles, restores smooth operation to track mounted drawers. Fits a 9/32" x 3/4" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Size: 1-3/4"L x 1-1/4"W x 3/8"H. Polybagged.
Amerock Allison BP814WD Round Cabinet Knob PULL 3IN 76MM SAT NICKEL      Amerock Allison 221WHT Round Cabinet Knob
Unfinished wood knob. Use with one #8-32 x 1" type screw. 3? Center-to-Center, 0.79? projection. Ceramic knob with 1-1/2" diameter x 1-1/16" height. Use with one #8-32 x 1" type screw. Pink Rose Insert.
Amerock Allison 253LB Cabinet Pull Prime Line R 7130 Drawer Track Guide Kit Amerock BP34283 Self-Closing Cabinet Hinge
Pull with 3" center, 4-7/8" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws. Purple polyethylene guide and white side saddles. Guides used for aligning drawer and making for a smoother operation. Fits a 3/32" x 1-3/16" track. Contents: 2 guides, 4 side saddles, and 2 sets of installation fasteners. Designed for use with metal rolled-edge tracks. 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H.
Schlage 325A92 Double Pole Magnet Catch KNOB 1-3/16IN WHITE/POL CHROME Amerock BP34173 Cabinet Hinge
Case design allows easy magnet adjustment on cabinet or small door applications. Case size: 2-1/16" x 1-1/8" x 5/8". Packed with sheet metal screws. Slim-pak, polybagged. 1-1/4" diameter. Use with one #8-32 x 1" type screw. Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2")
Amerock BP3429BB Self-Closing Variable Overlay Cabinet Hinge Amerock Allison BP53011G10 Ring Cabinet Knob Amerock Allison BP86526D Wired Cabinet Pull
Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H. Knob with 1-1/4? (32mm) L x 1-3/16? (30mm) H. Screw Size(s): #8-32 x 1?L machine screw. Solid brass wire pull with 3" center, 3.312" length x .375" width x 1.25" height. Use with two #8-32 x 1" type screws.
Amerock Allison BP594AE Round Colonnade Cabinet Knob Amerock BP9783AL Magnet Catch Amerock Allison 252PB Cabinet Pull
Knob with 1-1/2? (38mm) L x 7/8? (22mm) H. Use with one #8-32 x 1" type screw. Size: 2"L x 1"W x 5/8"H; Strike: 1-1/8"L x 3/4"H. Polybagged. Pull with 3" center, 5-1/2" length x 5/8" width x 1" height. Use with two #8-32 x 1" type screws.
Amerock Inspiration BP3428ORB Self-Closing Cabinet Hinge Schlage C901 Middle Butt Cabinet Hinge Amerock BP97653PT Magnet Catch with Offset Strike
3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H. Bright Brass Finish. Size: 1-15/16"L x 11/16"W; Strike 1-1/8"L x 7/8"W x 3/4"H. Use (4) #6 T.H. x 1/2" screws and (1) #15 x 1/2" nail. Polybagged.
Knape & Vogt 1284-4WP Rear Mouth Socket Rear Mounting Bracket Amerock Allison 69128 Round Cabinet Knob Amerock BP3429ORB Self-Closing Variable Overlay Cabinet Hinge
Optional bracket for use with draw slide No.1284. Porcelain knob with 1-1/2" diameter x 15/16" height. Use with one #8-32 x 1" type screw. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H.
Amerock Allison BP53471G10 Round Scroll Cabinet Knob Amerock BP9798AW Magnet Catch PULL 3-3/4IN 96MM SATIN NICKEL
Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw. Size: 2-1/32"L x 1-1/16"W x 13/16"H; Strike 1"L x 3/4"W. Polybagged. Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw).
PULL 3-3/4IN OILRUB BRONZE    Amerock Allison BP341526 Basic Modern Bail Cabinet Pull Amerock Inspiration BP3428G10 Self-Closing Cabinet Hinge
Transitional style, metal finishes collection. 3-3/4 in (96 mm) center-to-center pull. Includes mounting hardware: (Size(s):#8-32 x 1in Truss Head Machine Screw). Pull with 2-3/4" center, 3-7/16" length x 3/4" width x 15/16" height. Use with two #8-32 x 1" type screws. 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H.
Amerock Allison BP53470G10 Scroll Cabinet Pull Amerock Inspiration BP3429G10 Self-Closing Cabinet Hinge Amerock Allison BP53471ORB Round Scroll Cabinet Knob
Pull with 3" center, 3-13/16" length x 11/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H. Knob with 1-1/4" diameter x 1-1/8" height. Use with one #8-32 x 1" type screw.
Amerock BP341726 Semi-Concealed Cabinet Hinge Amerock Allison 14404SCH Round Plain Cabinet Knob Amerock Allison 245WPB Cabinet Pull
Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2") Transitional style knob with 1-3/16" diameter x 1-1/18" height. Use with one #8-32 x 1" type screw. Metal pull with 3" center, 4-15/16" length x 3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. White insert.
Prime Line R 7147 Flat Stepped Drawer Guide Roller Assembly Prime Line R 7148 Convex Drawer Track Roller Schlage C903 Middle Butt Cabinet Hinge
Rollers mount at the front of the drawer opening, and help center the drawer. This allows for smoother operation. Flat stepped roller edge type, mixed materials. Includes 1 left hand roller, 1 right hand roller, and 1 set of installation fasteners. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws. Bright Brass Finish.
Amerock BP7603 Back Plate Amerock BP7139W Self-Closing Semi-Concealed Cabinet Hinge Amerock Allison BP55220G10 Small Oblong Cabinet Knob
1-3/4" diameter x 3/16" height. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #6 O.H. x 5/8" type and (3) #6 F.H. x 1/2" type screws. 2.75"L x 1.875"W x .625"H. Knob with 1.125" diameter x 2.625" length  x  0.75" width. Use one #8 - 32 x 1" type screw.
Amerock Allison BP52994G10 Narrow Arch Cabinet Pull Amerock Traditional Classics 14303CB Crystal Cabinet Knob Prime Line R 7141 Drawer Track Roller
Transitional style pull, 3-3/4? (96mm) mounting holes. 1? projection, 4-3/16? overall length, 19/13? width. Use with two #8-32 x 1" type screws. Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contains: 2 roller assemblies, 2 sets of installation screws.
Schlage SP2A92 Cabinet Latch Amerock Allison 263WCH Cabinet Pull Amerock Allison 937 Cabinet Pull
1-3/8" x 5/8" Plate. 13/16" x 5/8" Strike. Polybagged. Metal pull with 3" center, 5" length x 3/4" width x 1-1/4" height. Use with two #8-32 x 1" type screws. White insert. Pull with 3" center, 3-1/2" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws.
Amerock BP792826 Self-Closing Imperial Cabinet Hinge KNOB BRASS 1/2IN              BRACKET RR MT F/MDL 84-8450 ZN
KNOBS 1/2IN BRS
Our Price : $3.99
Amerock Cabinet Hinge, Self-Closing, Imperial, 5 Holes, 2-3/4 in Door Leaf Length, 2 in Door Leaf Width, Face Mounting, Steel, Polished Chrome, BHMS Approved, KCMA Certified, With 3/8 in Inset Visual-pack. Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish.
Amerock Allison BP53470ORB Scroll Cabinet Pull Amerock Essential'Z BP26201G10 Arch Tip Cabinet Pull Amerock Inspirations BP1581WID Round Leaf Cabinet Knob
Pull with 3" center, 3-13/16" length x 11/16" width x 1-1/4" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 5-1/4" length x 3/8" width x 1" height. Use with two #8-32 x 1" type screws. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
Amerock BP33772AL Double Magnet Catch Amerock Anniversary BP853G9 Round Cabinet Knob Schlage C904 Middle Butt Cabinet Hinge
3-1/4"L x 1-1/8"W x 9/16"H (projection). Polybagged. Metal knob with 1.375" diameter x 1.062" height. Use with one #8-32 x 1" type screw. Bright Brass Finish.
Amerock Inspirations BP1586G10 3-Ring Round Cabinet Knob BRACKET RR MT F/MDL TT100 ZINC Schlage C904 Broad Butt Cabinet Hinge
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Optional rear mounting socket for face frame application simplifies installation. Non handed. Hardware included.  3-1/2" L x 0.50"W. Zinc finish. Bright Brass Finish.
Amerock Inspirations BP1586WID 3-Ring Round Cabinet Knob Amerock Allison BP52995G10 Arch Tip Cabinet Pull Amerock Anniversary BP874BN Cabinet Pull
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Pull with 96mm center. Use with two #8-32 x 1" type screws. Pull with 3" center, 5" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws.
Amerock Inspirations BP1581R2 Round Leaf Cabinet Knob Amerock Inspirations BP1585G10 Round Rope Cabinet Knob Amerock Anniversary BP85326 Round Cabinet Knob
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Knob with 1-1/4? (32mm) L x 1-1/16? (27mm) H. Screw Size(s): #8-32 x 1?L machine screw. Metal knob with 1.375" diameter x 1.062" height. Use with one #8-32 x 1" type screw.
Amerock Anniversary BP874G9 Cabinet Pull Amerock Allison BP735AE Chatsworth Arch Cabinet Pull Prime Line R 7132 Drawer Track Back Roller with Plastic Roller
Pull with 3" center, 5" length x 1/2" width x 1-1/8" height. Use with two #8-32 x 1" type screws. Pull with 3" center, 4-3/4" length x 3/4" width x 7/8" height. Use with two #8-32 x 1" type screws. Steel bracket, convex plastic roller mounts on rear of drawer. Used as center roller for monorail drawer slide systems. Contents: 2 roller assemblies, 2 sets of installation screws.
Amerock Inspirations BP1585FB Round Rope Cabinet Knob Shepherd 9547 Square Lazy Susan Turntable Amerock Allison BP52996G10 Flat Arch Cabinet Pull
Knob with 1-1/4? (32mm) L x 1-1/16? (27mm) H. Screw Size(s): #8-32 x 1?L machine screw. Ball-bearing for rotating book racks, business machine stands, serving trays, kitchen storage racks, etc. Pull with 96mm center. Use with two #8-32 x 1" type screws.
CATCH BULLET BRASS 3/8IN      CATCH CABINET WHITE           CATCH CABINET WHITE
BULLET CATCHES 3/8IN BRS
Our Price : $4.59
CABINET CATCHES WHT
Our Price : $4.59
CABINET CATCHES WHT
Our Price : $4.59
National Hardware Bullet Catch, Series: V1845, 3/8 in Bore, Steel, Bright Brass, For Cabinets, Chests and Doors Design allows magnet to pivot so that it will always center squarely on the metal strike for maximum holding strength. Offers sturdy, permanent magnet in a nylon case. Slotted screw holes are for ease of adjustment. Visual-pack. Design allows magnet to pivot so that it will always center squarely on the metal strike for maximum holding strength. Offers sturdy, permanent magnet in a nylon case. Slotted screw holes are for ease of adjustment. Visual-pack.
KNOB BRASS 5/8IN              Amerock Inspirations BP1586ORB 3-Ring Round Cabinet Knob Amerock Revitalize BP55342ORB Round Cabinet Knob
KNOBS 5/8IN BRS
Our Price : $4.59
Visual-pack. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Knob with 1-1/4? (32mm) L x 1-1/4? (32mm) H. Screw Size(s): #8-32 x 1?L machine screw.
Amerock BP3404CB Cabinet Hinge Amerock Allison BP53010G10 Cup Cabinet Pull Amerock Essential'Z BP19259G10 Open Arch Cabinet Pull
3-1/2"L x 1-7/16"W - Polybagged. Pull with 3" center, 3-3/8" length x 1-1/4" width. Pull with 3" center, 4-1/2" length x 9/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Amerock Revitalize BP55342G10 Round Cabinet Knob Amerock BP7128W Self-Closing Semi-Concealed Cabinet Hinge Amerock Ceramics BP72530 Round Cabinet Knob
Knob with 1-1/4? (32mm) L x 1-1/4? (32mm) H. Screw Size(s): #8-32 x 1?L machine screw. 3/8" inset. Use with five #6 O.H. x 5/8" type screws. 2-3/4"L x 2"W x 1/8"H. Use with one #8-32 x 1" type screw.
KNOB DECO ANT BRASS 3/4IN     KNOB DECO BRASS 3/4IN         BRACKET REAR MNT F/MDL 1805 ZN
Visual-pack. Visual-pack. Pair of rear brackets (left and right) for the 1805 epoxy-coated drawer slide features a 2-3/8" socket.
Prime Line U 9947 Drawer and Cabinet Lock Amerock BP792926 Self-Closing Variable Overlay Cabinet Hinge Toolbasix 6298319-3L Drawer Lock
Keyed locking unit for added security. Fits 7/8" hole. 5/16" bolt throw. Includes 1 lock, 2 keys and installation screws. Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #5 O.H. x 5/8" and (3) #5 F.H. x 1/2" screws. 2-3/4"L x 2"W x 3/4"H. Alloy steel construction. Fits max 3/4" thick. For cabinet doors and desk drawers. 1.417" screw hole spacing. 2.04" overall width. Includes 2 keys and screws.
Amerock BP7929AE Self-Closing Imperial Variable Overlay Cabinet Hinge Prime Line R 7240 Right Hand/Left Hand Drawer Track Back Plate Amerock Allison BP1950BNB Round Cabinet Knob
Tested for durability in conditions exceeding all KCMA certification requirements and BHMS standards for cycle life, strength and finish quality. Reliable, self-closing power of dual compression springs. Use (2) #5 O.H. x 5/8" and (3) #5 F.H. x 1/2" screws. 2-3/4"L x 2"W x 3/4"H. White nylon; 2-3/4"socket depth allows 2"of front to back adjustment of the rail; used on side mounted drawer track systems. Raw finish. Contents: 1 left hand bracket; 1 right hand bracket; 2 sets of installation screws. NOTE: Right side has a larger lip. Knob with 1-1/4" diameter x 1" height. Use with one #8-32 x 1" type screw.
Amerock Allison BP55222G10 Cabinet Pull Amerock BP7928AE Self-Closing Imperial Cabinet Hinge HINGE INSET 3/8IN SATIN NICKEL
Pull with 3" center.  3.6" length x 0.556" width. Use two #8 - 32 x 1" type screw. Amerock Cabinet Hinge, Self-Closing, Imperial, 5 Holes, 2-3/4 in Door Leaf Length, 2 in Door Leaf Width, Face Mounting, Steel, Antique Brass, BHMS Approved, KCMA Certified, With 3/8 in Inset, 19.05 mm Projection Size:  2-3/4"L x 2-1/4"W x 3/8"H. Includes mounting hardware: (Size(s): #5 Oval Head Screw x 5/8"; #5 Flat Head Screw x 1/2")
Prime-Line U 9943 Drawer and Cabinet Lock Prime-Line U 9941 Drawer and Cabinet Lock Amerock Allison BP778AE Round Carriage House Cabinet Knob
Prime-Line Drawer and Cabinet Lock, Suitable For Use With: 9/16 in Thickness Metal or Wood Doors or Drawers, Keyed Key, 2 Keys, Yale Y-11 Keyway, Die Cast/Steel, Stainless Steel, Includes: (3) Cams, (1) Trim Collar, (1) Spur Washer, (2) Rotation Washers and (1) Lock Nut, 3/4 in Diameter X 7/8 in Length Cylinder Prime-Line Drawer and Cabinet Lock, Suitable For Use With: 5/16 in Thickness Metal or Wood Doors or Drawers, Keyed Key, 2 Keys, Yale Y-11 Keyway, Die Cast/Steel, Stainless Steel, Includes: (3) Cams, (1) Trim Collar, (1) Spur Washer, (2) Rotation Washers and (1) Lock Nut, 3/4 in Diameter X 5/8 in Length Cylinder Knob with 1-1/4" diameter x 1" height. Back plate with 2'' diameter x 1/4" thickness. Use with one #8-32 x 1" type screw.
Amerock Traditional Classics 14303G10 Acrylic Round Crystal Cabinet Knob Amerock Traditional Classics 14303ORB Acrylic Round Crystal Cabinet Knob Amerock Reflections BP1387G10 Round Cabinet Knob
Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter. Use with one #8-32 x 1" type screw. Knob with 1-1/4" diameter x 1-1/16" height. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish.
Amerock Revitalize BP55342GB Round Cabinet Knob Amerock Mulholland BP53029ORB Square Traditional Cabinet Knob Amerock Bar Pulls BP19010SS Cabinet Pull
Knob with 1-1/4? (32mm) L x 1-1/4? (32mm) H. Screw Size(s): #8-32 x 1?L machine screw. Knob with 1-1/4" length x 13/16" width x 1-1/8" height. Use with one #8-32 x 1" type screw. Metal pull with 3" center to center, 5-1/3" length x 1/2" width x 1.34" height. Use with two #9-32 x 1" type screws.
Amerock Manor BP26127G10 Oval Cabinet Knob Amerock Manor Egg BP26127ORB Cabinet Knob Amerock Inspirations BP1580WID Botanica Leaf Cabinet Pull
Use with one #8-32 x 1" type screw. Use with one #8-32 x 1" type screw. Pull with 3" center, 5-5/8" length x 11/16" width x 1" height. Use with two #8-32 x 1" type screws. Protected by Guardian Lifetime finish.
Amerock Allison BP771WI Round Legacy Cabinet Knob Amerock Swirl'Z BP9338G10 Ball Eclectic Spiral Cabinet Knob Amerock Inspirations BP1585ORB Round Rope Cabinet Knob
Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. 1-1/4"D x 1-1/16"H. Use with one #8-32 x 1" type screw. Protected by Guardian Lifetime finish. Knob with 1-1/4? (32mm) L x 1-1/16? (27mm) H. Screw Size(s): #8-32 x 1?L machine screw.
   
 
1 2