Home > WINDOW & DOOR HARDWARE > BYPASS DOOR HARDWARE
Sort By:
1
Prime Line N 6567 Door Guide Prime Line N 6658 By-Pass Door Bumper Set National Hardware MPB142 Cup Pull
One pair fits any thickness single door; install a series of pairs for multiple doors. Includes one pair of 1"H nylon guides and four No.8 x 3/4" Phillips pan head screws. Rubber bumper mounts onto jamb to prevent wardrobe doors from slamming. Includes 4 bumpers, 4 No. 8 x 3/4" Phillips pan head sheet metal screws. National Hardware Cup Pull, Series: MPB142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Satin Nickel
National Hardware MPB142 Cup Pull National Hardware MPB142 Recessed Cup Pull Prime Line N 6562 Floor Mount Door Guide
National Hardware Cup Pull, Series: MPB142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Antique Bronze National Hardware Cup Pull, Recessed, Series: MPB142, Suitable For Use With: 1/4 in and Larger Size Panels, 3/4 in Diameter, Steel, Brass Used by many door manufacturers. 2-7/8"L adjustable bottom-mount nylon bracket and nylon spacer guide pins. For 3/4" to 1-3/8" thick bypassing doors. Includes three No.8 x 3/4" Phillips pan head screws.
Prime Line N-6765 Round Lever Pull Handle Prime Line N 6563 Door Guide PART SLIDING DOOR BRS 1-3/4IN
Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers. 4-3/16"L x 1"W nylon guide with 1-3/8" between each spacer. For 1-3/8" thick bypassing doors. Includes two No.8 x 3/4" Phillips pan head screws. Designed for by-passing, pocket and other sliding doors. Works on panels 1/4 inch or larger. Bagged.
Prime Line N-6846 Finger Pull Prime Line N-6893 Finger Pull National Hardware V145 Cup Pull
Plated steel, universal design fits a 3/4" diameter hole. Plated steel, universal design fits a 3/4" diameter hole. National Hardware Cup Pull, Series: V145, Suitable For Use With: 1/4 in and Larger Size Panels, 2-1/8 in Diameter, Steel, Antique Bronze
Johnson 2135PPK1 Door Guide Prime Line N 6564 Self-Adjusting Door Guide Schlage SPS221B-605/SP221 Round Door Pull
One piece metal guide plate. Pivoting nylon guide posts stays  parallel to the door preventing door binding. 3/4" or 1-3/8" adjustable for slight door thickness variations. 4-1/4"L x 3/4"W universal-design nylon guide for 3/4" to 1-3/8" thick bypassing doors. Includes two No.8 x 3/4" Phillips pan head screws. 2-1/8" Diameter hole - slim pak -polybagged.
Prime Line N 6761 Adjustable Door Guide Prime Line N 6760 Door Guide PART SLIDING DOOR TAN
SLIDING DOOR PARTS TAN
Our Price : $3.79
Used by many door manufacturers. 2-1/8"L adjustable bottom-mount nylon bracket and nylon spacer guide pins. For 3/4" to 1-3/8" thick bypassing doors. Includes three No.8 x 3/4" Phillips pan head screws. Used by many door manufacturers. 2-1/8"L adjustable bottom-mount nylon bracket and nylon spacer guide pins. For 3/4" to 1-3/8" thick bypassing doors. Includes three No.8 x 3/4" Phillips pan head screws. Designed as an adjustable, guide for by-passing doors from 3/4 to 1-3/8 inch thick. Keeps door properly aligned. Needs cardboard shim for proper spacing of 2 side sections. Includes screws.
PART SLIDING DOOR ZINC PLATED Prime Line N-6698 Round Knob Pull Handle Prime Line N 6501 Round Edge Roller Assembly
SLIDING DOOR PARTS ZN PLT
Our Price : $3.79
Limits sliding action of a sliding door. Absorbs shock. Easy to install. Rubber bumper with steel bracket. Visual-pack. Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers. Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 6 No.8 x 3/4" Phillips pan head screws. N 7030 and N 7031 have nickel plated steel brackets.
Prime Line N 6500 Round Edge Roller Assembly Prime Line N-6699 Round Lever Pull Handle National Hardware MPB141 Recessed Flush Pull 3-1/4 in L x 1-3/8 in W
Fits Acme wardrobe doors in top-hung side-mounting applications. Adjustable steel bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 6 No.8 x 3/4" Phillips pan head screws. N 7030 and N 7031 have nickel plated steel brackets. Plated steel, includes 2 brass nails for installation. National Hardware Flush Pull, Recessed, Series: MPB141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, Steel, Satin Nickel, Includes: Screws
PART SLIDE DOOR ANT BRBZ 3/4IN Prime Line N-7209 Cross Finger Pull Prime Line N-7206 Knob Pull Handle
Designed for by-passing, pocket and other sliding doors. 3/4" diameter hole. Works on panels 1/4 inch or larger. Easy installation - no screws required. Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers. Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers.
SLIDING DOOR PARTS 2-1/8IN BRS National Hardware V141 Recessed Flush Pull 3-1/4 in L x 1-3/8 in W National Hardware V141 Recessed Flush Pull 3-1/4 in L x 1-3/8 in W
335612 V141 FLUSH PULL
Our Price : $4.59
Use for sliding doors and panels. National Hardware Flush Pull, Recessed, Series: V141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, Steel, Satin Nickel, Includes: Screws National Hardware Flush Pull, Recessed, Series: V141, Suitable For Use With: Sliding Doors, Pocket Doors and Cabinet Doors, 3-1/4 in Length, 1-3/8 in Width, Steel, Antique Bronze, Includes: Screws
Prime Line N-6706 Adjustable Bottom Pivot Prime Line N-6661 Adjustable Floor Mount Guide and Carpet Riser Prime Line N6509 Convex Edge Door Roller Assembly
Adjustable  pivot with  3/8" diameter nylon base, fits doors of many wardrobe manufacturers. Contents: 2 pivots Nylon bottom guide tips with steel bracket adjusts for 3/4" to 1-3/8" thick doors, 1/8" plastic shim to raise guide up to 5/8" above carpet. Contents: 1 guide; 5 riser plates; 2 installation screws and 2 plastic anchors. Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick by-passing doors up to 50 Lbs. Includes 2 No.8 x 3/4" Phillips pan head screws.
Prime Line N-7203 Finger Pull Prime Line N6508 Convex Edge Door Roller Assembly National Hardware MPB145 Round Cup Pull
Held in place by 2 nails; used by many wardrobe & door manufacturers. Contents: 2 pull handles; 4 nails. Includes: 2 pull pull handles; 4 brass nails for installation. 7/16" depth. Used by many wardrobe manufacturers. Fits Cox wardrobe doors in top-hung side-mounting applications. Steel offset adjustable bracket with 1/4"W round edge nylon wheel. For 3/4" to 1-3/8" thick by-passing doors up to 50 Lbs. Includes 2 No.8 x 3/4" Phillips pan head screws. National Hardware Cup Pull, Round, Series: MPB145, Suitable For Use With: 1/4 in and Larger Size Panels, 2-1/8 in Diameter, 3/8 in Depth, Steel, Satin Nickel
Prime Line N 6560 Adjustable Door Guide Prime Line N6840 Flat Edge Sliding Side Mount Door Roller Assembly Prime Line N6841 Flat Edge Sliding Side Mount Door Roller Assembly
Fits on Acme and other doors. 4-5/8"L x 1-1/2"W steel base with white nylon tips. Adjustable bottom bracket. For 3/4" to 1-3/8" thick bypassing doors. Includes two No.8 x 3/4" Phillips pan head screws. Fits wardrobe doors. Used by Johnson Hardware in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W flat edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 3 No.8 x 3/4" Phillips pan head screws. Fits wardrobe doors. Used by Johnson Hardware in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W flat edge nylon wheel. For 3/4" to 1-3/8" thick doors. Includes 3 No.8 x 3/4" Phillips pan head screws.
Prime Line N 6668 Round Edge Heavy-Duty Roller Assembly Prime Line N 6667 Round Edge Heavy-Duty Roller Assembly Prime Line N 6516 Round Edge Roller Assembly
Fits wardrobe doors. Single round edge nylon wheel; side mounting adjustable steel bracket. For 3/4" to 1-3/8" thick doors up to 90lbs. each. Fits on Atlas. Includes 2 roller assemblies; 4 no. 8x3/4" Phillips pan head sheet metal screws. Fits wardrobe doors. Single round edge nylon wheel; side mounting adjustable steel bracket. For 3/4" to 1-3/8" thick doors up to 90lbs. each. Fits on Atlas. Includes 2 roller assemblies; 4 no. 8x3/4" Phillips pan head sheet metal screws. Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W round edge nylon ball bearing wheel. For 3/4" to 1-3/8" thick doors. Includes 2 No.6 x 5/8" and 1 No.4 x 3/4" Phillips pan head screws.
Prime Line N 6517 Round Edge Roller Assembly Prime Line N6527 Convex Edge Tandem Roller Assembly HANGER DOOR SLIDING
Fits wardrobe doors in top-hung side-mounting applications. Offset adjustable steel bracket with 1/4"W round edge nylon ball bearing wheel. For 3/4" to 1-3/8" thick doors. Includes 2 No.6 x 5/8" and 1 No.4 x 3/4" Phillips pan head screws. Top hung; offset adjustable bracket. Round edge nylon wheel. Fits 3/4" to 1-3/8" thick doors; fits on Harvey. Contents: 1 roller assembly, 4 no. 8 x 1-1/4" Phillips pan head sheet metal screws. Nylon wheels require no lubrication. For 3/4" to 1-3/8" thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb.
HANGER DOOR SLIDING           PULL EDGE BRASS               Johnson 2200 By-Pass Door Hardware Set
EDGE PULLS BRASS
Our Price : $9.99
Nylon wheels require no lubrication. For 3/4" to 1-3/8" thick doors. Cam-action dial permits fingertip adjustments in aligning door to jamb. Designed for all sliding doors. Flush mount. Mounting screws included. Visual-pack. For doors 3/4" or 1-3/8" thick, weighing up to 50 pounds. Track can be cut down to fit any smaller openings. Set contents: (1) 2200 track length, (2) 2238 hangers, (2) 2216 hangers, (1) 2135 door guide and (2) 15 pulls.
Johnson 2200F By-Pass Fascia Door Hardware Set Johnson 2200 By-Pass Door Hardware Set Johnson 2200F By-Pass Fascia Door Hardware Set
For doors 1-3/8" thick, weighing up to 50 pounds. Aluminum fascia track. Convex track rails provide one point contact between wheel and track. Hangers includes: 7/8" diameter molded nylon machine turned wheel with three point locking plate. Adjustable hangers and door guide. Nylon 1" high guide posts and swivel. 14-16 gauge zinc dichromate plated steel parts. Set contents: (1) 2200F track; (4) 2238 hangers; (1) 2135 door guide and (2) 15 pulls. For doors 3/4" or 1-3/8" thick, weighing up to 50 pounds. Track can be cut down to fit any smaller openings. Set contents: (1) 2200 track length, (2) 2238 hangers, (2) 2216 hangers, (1) 2135 door guide and (2) 15 pulls. For doors 1-3/8" thick, weighing up to 50 pounds. Aluminum fascia track. Convex track rails provide one point contact between wheel and track. Hangers includes: 7/8" diameter molded nylon machine turned wheel with three point locking plate. Adjustable hangers and door guide. Nylon 1" high guide posts and swivel. 14-16 gauge zinc dichromate plated steel parts. Set contents: (1) 2200F track; (4) 2238 hangers; (1) 2135 door guide and (2) 15 pulls.
PULL CLOSET DOOR BRONZE 2IN   PULL CLOSET DOOR BRONZE 2 1/8 Johnson 2200F By-Pass Fascia Door Hardware Set
Plated steel, includes 2 brass nails for installation. Plated steel, includes 2 brass nails for installation. For doors 1-3/8" thick, weighing up to 50 pounds. Aluminum fascia track. Convex track rails provide one point contact between wheel and track. Hangers includes: 7/8" diameter molded nylon machine turned wheel with three point locking plate. Adjustable hangers and door guide. Nylon 1" high guide posts and swivel. 14-16 gauge zinc dichromate plated steel parts. Set contents: (1) 2200F track; (4) 2238 hangers; (1) 2135 door guide and (2) 15 pulls.
National Hardware V770D By-Pass Door Hardware Set Schlage SP22B3 Oblong Door Pull 3-1/8 in L x 15/16 in W x 7/16 in D
National Hardware Door Hardware Set, By-Pass, Series: V770D, 60 lb Safe Working Load, 96 in Size, Includes: 770 Rail, 192 Adjustable By-Passing Door Guide, 790/791 Dial Action Hangers and Screws, Steel With Nylon, Galvanized, BHMA A138.18 Size: 15/16"W x 3-1/8"H x 7/16"D. Slim pak - polybagged.
   
 
1