Home > FARM & RANCH > LIVESTOCK CARE & SUPPLIES > LIVESTOCK ACCESSORIES > STOCK TANKS
Sort By:
1
B & K 109-851 Tank Float Rod Assembly B & K 109-862 Tank Float B & K 109-841 Nuzzle Assembly
1/4-20 male threads on both ends, 1/4" rod diameter. Corrosion resistant, lightweight and suitable for a broad range of destructive fluids. Suitable for 175 degrees Fahrenheit. For open tank service only. Orange for ultra-violet light protection. 1/4-20 spud connector, for 1/2'' and 3/4'' Robert or Flippen valves. Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to or activation of valve. Assembly consists of thumb screw, hooks, swivel joint, and stem, threaded at one end. 1/4-20 thread on stem/thumb screw.
CORD LOCK WATER-TIGHT ORANGE  CORD LOCK WATER-TIGHT GREEN   Watts P6 Flippen Tank Float
Provides water-tight connection. Keeps power cords from pulling apart. Use with power tools, lawn and garden equipment, outdoor lighting and tank deicers. Provides water-tight connection. Keeps power cords from pulling apart. Use with power tools, lawn and garden equipment, outdoor lighting and tank deicers. Highly corrosion resistant. Unaffected by salts and caustic fluids. All injection molded polyethylene construction. Resistant to sunlight deterioration. Maximum temperature 140 degrees F.
Watts N1-NA Flippen Nuzzle Assembly Dare-O-Matic 798 Economy Tank Float Valve Watts ST750 Flippen Standard Duty Float Valve
Allows ball to float free. Designed for use on exposed cattle watering systems. Cattle can nuzzle ball without harm to, or activation of valve. Assembly consists of thumb screw, hooks, swivel joint and stem threaded at one end. Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 PSI or from gravity flow with optional special orifice. Outer housing molded of high impact resin. Withstands weather and abuse. Durable molded float. Two sets of brackets. Fits poly tanks and steel tanks. 300 GPH. Bronze body with MNPT threaded inlet and outlet. Cotter pin pivot arm assembly. Replaceable plungers. Stem fitting: 1/4-20. Maximum pressure 125 psi. Maximum temperature 180 degrees F.
Newell Rubbermaid 5050-12 Tank Drain Plug Watts ST1000 Flippen Standard Duty Float Valve B & K 109-813 Tank Float Valve
For stock tank Nos.4242 (SKU 635.6257), 4243 (SKU 635.5978), 4244 (617.6580), 4245 (SKU 635.6471) and 4247. Bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaces plungers. Maximum pressure: 125psi. Maximum temperature: 180 degrees F. Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No.R400-1/2: 12 GPM at 35 PSI; 22GPM at 85 PSI. No.R400-3/4: 21 GPM at 35 PSI; 39.9 GPM at 85 PSI.
Newell Rubbermaid 424806BLA Float Valve Dare-O-Matic 1780 Tank Float Valve B & K 109-814 Tank Float Valve
Fits all sizes Rubbermaid stock tanks. Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 PSI or from gravity flow with optional special orifice. Precision die cast outer housing. Durable molded float. Includes two sets of brackets. Fits poly tanks and steel tanks. 300 GPH. Installation instructions included. Two tapered threads on inlet for mating with pipe and a straight thread for a locknut. Machined flange for support against tank wall. All bronze bodies. Serrated arms for quick and easy adjustment of water level (all sizes). High tensile manganese bronze long and short arms. Stainless steel pivot bolt assembly. No-jam, single lever action. Replaceable seals. Free discharge flow capacity. No.R400-1/2: 12 GPM at 35 PSI; 22GPM at 85 PSI. No.R400-3/4: 21 GPM at 35 PSI; 39.9 GPM at 85 PSI.
Dare-O-Matic 1800 Non-Siphon Tank Float Valve Farm Innovators H4815 Floating De-Icer Fortex/Fortiflex 2404501 Farm Stock Tank
Use to convert tanks or barrels into automatic stock waterers. Requires little attention and keeps open tanks filled with freshwater. Adjustable to several heights. Install by hanging plated brackets over edge of tank. Designed to operate on pressure up to 70 PSI or from gravity flow with optional special orifice. Precision die-cast, durable molded float and molded non-siphoning unit. Complies with basic anti-siphoning regulations. Has a replaceable non-siphoning unit. 300 GPH. Heats the water, keeps open an ice-free area of approximately 30'' in diameter down to sub-zero temperatures. Thermostatically controlled to operate only when necessary. Heavy-duty float will not rust, corrode or leak. Special 10'' heating element. 6' heavy duty grounded wire. For use in METAL TANKS ONLY. Individually packed. 120 AC voltage, 1500 watts. Seamless construction for durability.
Farm Innovators H-429 Submergible De-Icer Ice Chaser C-250 Utility De-Icer Ice Chaser H418 Floating De-Icer
Thermostatically controlled to operate only when necessary. Designed to rest in the bottom of the tank unnoticed by livestock. Protective sturdy cage permits use in all tanks. Safe in plastic. This item is designed to work for tank sizes up to 300 gallons.  It's best used for tanks 100 - 300 gallons. Designed for multiple uses around the farm. Constructed of cast aluminum for ultimate efficiency and safety. Thermostatically controlled to operate only when necessary. Safe in plastic. Extra watts for extremely cold climates or oversized bird baths. Good for use in containers up to 25 gallons. Thermostatically controlled to operate only when necessary. Keeps tanks up to 250 gallons from completely freezing during winter. Uses less electricity than traditional 1500 watt de-icers. Can be used in metal, plastic or rubber stock tanks. U.L. Listed. 120 AC voltage; 1250 watts.
Ice Chaser C-250M Utility De-Icer Farm Innovators UPH15 Drain Plug De-Icer DEICER UTILITY MULTI-USE 500W
Designed for multiple uses around the farm. Constructed of cast aluminum for ultimate efficiency and safety. Thermostatically controlled to operate only when necessary. Safe in plastic. Extra watts for extremely cold climates or oversized bird baths. Good for use in containers up to 25 gallons. Quick, easy installation. Unnoticed by livestock, no cord in water. Safe in all tanks. Fits all Behlen, Freeland, Hastings, Rubbermaid, Applegate and all other plastic and metal tanks on the market. Thermostatically controlled to operate only when necessary. 1500 watts. Thermostatically controlled de-icer keeps water from freezing in buckets, tanks or containers up to 50 gallons. Cast aluminum heating element. 5 foot power cord. Turns on and off automatically.
Watts ST2000 Flippen Standard Duty Float Valve Watts ST1250 Flippen Standard Duty Float Valve Newell Rubbermaid 424300BLA Structural Foam Stock Tank
Bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaces plungers. Maximum pressure: 125psi. Maximum temperature: 180 degrees F. Bronze body with female NPT inlet-open outlet. Cotter pin pivot arm assembly. Replaces plungers. Maximum pressure: 125psi. Maximum temperature: 180 degrees F. Built tough for superior performance and long-lasting durability in all kinds of weather extremes. Seamless construction. Use with drain plug SKU 641.5319. Size: 52"L x 31"W x 12"H.
Newell Rubbermaid 424200BLA Structural Foam Stock Tank Behrens 52110047GT Shallow Round End Farm Stock Tank Fortex/Fortiflex 2401101DP Farm Stock Tank
Built tough for superior performance and long-lasting durability in all kinds of weather extremes. Seamless construction. Oversize drain plug makes for easy drainage and cleaning of stock tank. 1-1/2" oversize drain. No.4242-00 - 53"L x 31"W x 25"H. No.4245-00 - 58"L x 39"W x 25"H. One piece molded all-poly tank. Extra heavy duty, molded rim for additional strength. Poly is FDA food grade approved, tested to -20 degrees F, corrosion free, impact resistant, and recyclable. Tank contains the proper amount of UV inhibitor to prevent deterioration from sunlight. Ideal for all watering needs. Seamless construction for durability.
Behrens 50130198 Shallow Round End Farm Stock Tank Behrens 52112037GT Round End Farm Stock Tank Behrens 50130028 Round End Farm Stock Tank
Manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms. Features a heavy reinforced steel tube rolled into the top lip for added strength and durability. For dairy or beef cattle, hogs, sheep, or horses. 1' deep. One piece molded all-poly tank. Extra heavy duty, molded rim for additional strength, with "sealed" top lip for easy dumping. Heavy duty, molded-in aluminum drain fitting and 1-1/4" poly drain plug. Poly is FDA food grade approved, tested to -20 degrees F, corrosion free, impact resistant, and recyclable. Tank contains the proper amount of UV inhibitor to prevent deterioration from sunlight. Ideal for all watering needs. Manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms. Features a heavy reinforced steel tube rolled into the top lip for added strength and durability. For dairy or beef cattle, hogs, sheep, or horses. 2' deep.
Behrens 52112017GT Round End Farm Stock Tank Newell Rubbermaid 424500BLA Structural Foam Stock Tank Behrens 50130048 Round End Farm Stock Tank
One piece molded all-poly tank. Extra heavy duty, molded rim for additional strength, with "sealed" top lip for easy dumping. Heavy duty, molded-in aluminum drain fitting and 1-1/4" poly drain plug. Poly is FDA food grade approved, tested to -20 degrees F, corrosion free, impact resistant, and recyclable. Tank contains the proper amount of UV inhibitor to prevent deterioration from sunlight. Ideal for all watering needs. Built tough for superior performance and long-lasting durability in all kinds of weather extremes. Seamless construction. Oversize drain plug makes for easy drainage and cleaning of stock tank. 1-1/2" oversize drain. No.4242-00 - 53"L x 31"W x 25"H. No.4245-00 - 58"L x 39"W x 25"H. Manufactured with premium, G90 galvanized, corrugated sidewalls and extra heavy (20 ga.), galvanized tank bottoms. Features a heavy reinforced steel tube rolled into the top lip for added strength and durability. For dairy or beef cattle, hogs, sheep, or horses. 2' deep. Great for locations where extreme weather conditions present a serious corrosion problem. The protective, heavy, shiny, zinc coating help tank last longer.
Behrens 52112027GT Round End Farm Stock Tank
One piece molded all-poly tank. Extra heavy duty, molded rim for additional strength, with "sealed" top lip for easy dumping. Heavy duty, molded-in aluminum drain fitting and 1-1/4" poly drain plug. Poly is FDA food grade approved, tested to -20 degrees F, corrosion free, impact resistant, and recyclable. Tank contains the proper amount of UV inhibitor to prevent deterioration from sunlight. Ideal for all watering needs.
   
 
1