Home > POWER TOOLS > POWER TOOLS > HOBBY TOOLS/ENGRAVERS
Sort By:
1
Dremel 560 Cutting Bit Dremel 402 Mandrel Dremel 429 Felt Polishing Wheel
Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels. Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM.
Dremel 432 Drum Sander Band Dremel 422 Felt Polishing Tip Dremel 408 Drum Sander Band
Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.
Dremel 430 Drum Sander Band Dremel 8193 Grinding Stone Dremel 480 Collet
Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237.
Dremel 83322 Grinding Stone Dremel 481 Collet Dremel 462 Polishing Point
Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. Rubber polishing points are impregnated with abrasive and used on on ferrous metals to remove rough areas, small burrs and scratch marks. Point is ideal for cleaning and defining grooves.
Bosch Accessories 113 Engraving Cutters Dremel 932 Grinding Stone Dremel 952 Grinding Stone
Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM.
EZ-Lock 423E/423 Polishing Wheel Dremel 561 Spiral Cutting Bit Dremel 512E Finishing Abrasive Buff
Polish silverware to high luster, car detailing and restore door and window hardware. Compatible with all Dremel rotary tools, EZ402 EZ Lock mandrel and standard 402 mandrel (619.9400). Do not run in excess of 30,000 RPM. Cuts wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. Do not run in excess of 30,000 RPM. For cleaning, light sanding and removing tarnish from brass. Use on metal, glass, wood, aluminum and plastics. For use with the EZ402 EZ lock mandrel (SKU #482.4447) or standard 402 mandrel (SKU #619.9400). Includes 2 fine 320 grit buffs.
Bosch 431  Oscillating Tool Accessories Dremel 540 Cut-Off Wheel Dremel 453 Precision Ground Sharpening Stone
A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6. Easily cuts off slots bolts, screws, sheet metal, thin wood and plastic, trim castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No. 402 mandrel. Used for sharpening chain saw blades, quickly and easily.
Dremel 454 Precision Ground Sharpening Stone Dremel 455 Precision Ground Sharpening Stone Bosch 90930 Carbon Motor Brush
Used for sharpening chain saw blades, quickly and easily. Used for sharpening chain saw blades, quickly and easily. For No. 275, No. 285, and No. 395 Type 3, 4 and 5 Moto-Tools.
Dremel 953 Grinding Stone Dremel 420 Cut-Off Wheel Dremel 118 High Speed Cutter
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 124 Rotary Tool Bit Dremel 144 Rotary Tool Bit Dremel 193 High Speed Cutter
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM.
Dremel 199 High Speed Cutter Dremel EZ Lock Finishing Abrasive Buff Set Dremel 9924 Replacement Engraving Point
Made of high quality steel. Use for shaping, hallowing, grooving, slotting, making tapered holes in soft metals, plastics and woods. Do not run in excess of 30,000 RPM. Compatible with both No.EZ402 EZ lock mandrel and standard No.402 mandrel and all Dremel rotary tools. Refinish furniture, clean grills, remove paint, tarnish and more. Includes 2 buffs, 1 coarse, 180 grit and 1 medium, 280 grit. Replaceable bit for the 290 Dremel (619.9319) engraver. Use this carbide point for normal applications. Can also be used for decorative engraving.
Quik-Change 4485 Collet Nut Kit Dremel 409 Cut-Off Wheel Dremel 7134 Abrasive Wheel Point
Kit consisting of a special collet nut and four collets for use with a variety of Dremel tools, attachments and handpieces. Allows you to quickly change collets to accept bits with shanks of 1/32" to 1/8". Kit contains (1) each 1/8" Collet, 3/32" Collet, 1/16" Collet, 1/32" Collet and Collet Nut. For slicing and cutting metal, wood and plastic. Easily cuts or slots bolts, screws, sheet metal, thin wood and plastic. Trims castings and molded ceramics. Cuts only along its edge. Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. High-speed cutter tipped with diamond particles tapered to a fine point for detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel.
Dremel 502 Flap Wheel Dremel 7144 Wheel Point Bit Dremel 504 Flap Wheel
A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. High-speed cutter tipped with diamond particles tapered to a bullet point for fine detail work. Used for engraving carving, finishing and other fine detail work on a variety of materials including wood, glass, ceramic and hardened steel. A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic.
Dremel 503 Flap Wheel Dremel EZ471SA Detail Coarse Abrasive Brush Dremel EZ472SA Detail Medium Abrasive Brush
A wheel of abrasive strips on a 1/8" shank. As the flapwheel wears down, new abrasive is continuously exposed, preventing clogging and providing uniform finishing throughout the life of the flapwheel. Use to grind and polish flat or contoured surfaces including metal, wood, rubber and plastic. For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400).
Dremel EZ473SA Detail Fine Abrasive Brush Dremel 426 Cut-Off Wheel Dremel 654 Router Bit
For detail cleaning and light sanding. Use on metal, glass, wood, aluminum and plastics. Use with either EZ402 (SKU #482.4447) or 402 (SKU #619.9400). Fiberglass reinforced, use for slicing and cutting metal, wood and plastic.  Do not attempt to sand or cut curved holes. Do not run in excess of 30,000 RPM. Use with No.402 mandrel. For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM.
Dremel 9901 High Speed Cutter Dremel 9903 Rotary Tool Bit Dremel 570 Grout Removal Bit
Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM. Shapes, smooths or grinds especially hard materials such as hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods. Do not run in excess of 30,000 RPM. Solid carbide bit removes wall and floor grout 3/8" below the face surface. Compatible with 275, 285, 395, 381, 398, and 380.
Dremel EZ409 Cut-Off Wheel Dremel Saw-Max Type 1A Cut-Off Wheel Dremel Saw-Max Type 1A Cut-Off Wheel
Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447). Cuts a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933. Cuts a variety of ferrous and nonferrous materials. 3/4" cut depth. .05" wheel thickness. For use on SKU# 454.6933.
Dremel 628-01 Drill Bit Set Dremel 650 Router Bit Dremel 615 Round Router Bit
Bits are made of high speed steel and used for drilling into soft materials. Includes: 1/32", 3/64" bits (use #483 collet), 1/16" bit (use #482 collet), 5/64", 3/32" bits (use #481 collet) and 7/64", 1/8" bits (use #480 collet). For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel. Do not run in excess of 30,000 RPM. For routing, inlaying and mortising in wood and other soft materials. Use with Dremel 230, 330 router attachments and 231 (678.2148) shaper/router table. Made of high-speed steel.
Dremel EZ Lock EZ Lock Mandrel Dremel EZ476 Cut-Off Wheel Dremel EZ Lock Grinding Wheel
One piece mandrel design simplifies the process of changing accessories and makes it easy to cut through a range of materials from metal to plastic. For use with exclusive EZ Lock Accessories. For cutting plastics. Compatible with all Dremel rotary tools. Pull-twist-release accessory changes. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Designed to flush-grind a surface. Domed shape and extra-thick reinforced aluminum oxide material allows the grinding wheel to be used on either its side or face for surface grinding, shaping, smoothing, deburring, rust removal sharpening, and flush-grinding. Applications include extended general-purpose grinding on metals, castings, welded joints, rivets and rust.  Use with either EZ402 (SKU #482.4447).
Dremel EZ456 Cut-Off Wheel Dremel 4486 Keyless Chuck Dremel 569 Grout Removal Bit
One piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through metal. Cut off wheels labeled for easy identification. Compatible with all Dremel rotary tools . Allows you to quickly and easily change accessory bits on  rotary tools 9.6V without changing collets. Accepts all accessory bits with 1/32" to 1/8" shanks. Solid carbide bit removes wall and floor grout 3/8" below the face surface. Compatible with 275, 285, 395, 381, 398, and 380.
Dremel SM540 Circular Saw Blade Dremel 562 Tile Cutting Bit Black & Decker RT1022 Rotary Tool Accessory Kit
Cuts most tiles and masonry materials such as wall tile, floor tile, porcelain, slate, stone and cement backer board. 3/4" cut depth. .075 wheel thickness. For use on SKU# 454.6933. High-speed cutter shapes ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes or create decorative wall tile by cutting a design. Universal system works on all rotary tools, including RTX and Wizard. Grinds, shapes and smooths most materials. Engraves most materials. Cuts nails, screws, bolts, chain, wire, pipe and closet maid shelving.
Dremel 9931 High Speed Cutter Bosch EZ407SA  Oscillating Tool Accessories Dremel 543 Cutting Wheel
Fast cutting, structured tooth-tape, for greater material removal on fiberglass, wood, plastic, epoxy, rubber, laminates, particleboard and ceramic tile. The EZ drum mandrel makes sanding band changes easy; just pull, place and secure. The one-piece mandrel design simplifies the process of changing bands and makes it easy to sand flat surfaces and edges. Provides a quicker and easier alternative to using a traditional sanding mandrel. Allows for flat sanding and edge sanding. Compatible with all Dremel rotary tools. Compatible with all Dremel 1/2" sanding bands. Bit diameter 12.7 mm. For use all dremel tools. Powerful shaping tool that quickly and efficiently removes material. Easily creates compound curves and works on a variety of materials including woods, fiberglass, laminates, plastic and leather.o.Cuts and finishes in one operation. Use the edge of the wheel for cutting and slotting. Use the "face" of the wheel for shaping. Cuts 33 percent deeper than former cutting/shaping wheels up to 1/2". DO NOT USE ON METAL
Bosch 687-01 Rotary Tool Bit Set Dremel Saw-Max Dome Shaped Type 27A Flush Cut Wheel Dremel EZ Lock Mandrel Starter Kit
Set contains: mandrel, (2) 1/2" felt polishing wheel, high-speed cutter, 1-1/4" fiberglass-reinforced cut-off wheel, aluminum oxide grinding stone, silicon carbide grinding stone, mandrel, nylon brush, (36) 409 15/16" emery cut-off wheel, 1/2" drum sander, 1/2" coarse sanding band, polishing compound, (2) 1/2" fine sanding band, (2) 1" felt polishing wheel and storage box. Applications: cutting, grinding, carving, engraving, shaping, sanding, cleaning and polishing.. For making flush cuts on a variety of materials such as wood, laminate flooring, drywall, PVC and plastic. Dome-shaped. 3/4" cut depth. .075" wheel thickness. For use on SKU# 454.6933. For cutting metal.  One-piece mandrel design simplifies process of changing cutting wheels, eliminates the need for screw and screwdriver. Effortless locking and loading, no tiny mandrel to lose. Compatible with all Dremel rotary tools. Includes No.EZ402 Mandrel and (5) No.EZ456 cutting wheels. Color code red. Do not run in excess of 35,000 RPM.
Dremel EZ544 Cut-Off Wheel Dremel 545 Abrasive Wheel Dremel A679-02 Sharpening Kit
Use to cut 1/2" wood and laminate. Pull-twist-release accessory change. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Long lasting, does not break, will not lose it's shape. Coated with fine diamond particles, smooth fine cut. Hole design to minimize heat buildup. Applications: cutting, sawing, carving, sharpening and filing hard materials including marble, concrete, brick, porcelain, ceramics, hard epoxy, soft and hard wood. Includes: No. 402 mandrel. Guides help restore edge on garden tools, sharpens all lawn mower blades and sharpens dull, slow-cutting chain saw blades. Includes garden tool, lawn mower and chain saw sharpening attachment, gauge, spacers, wrench, (4) sharpening stones and instruction manual. Fits tool models 4000, 3000, 400, 398, 395, 300, 285, 275, 200, 100, 8200, 800, 780, 770, and 7700.
Dremel 565 Cutting Guide Kit Dremel EZ Lock Abrasive Wheel Dremel A577 Rotary Detailers Grip Attachment Kit
Provides controlled cuts in a variety of materials. Depth adjustment sets correct cutting depth up to 3/4". Easy screw-on mounting and large window provides excellent visibility. Specs: fits tool models 400, 398, 395, 300, 285, 275, 200, 100, 800 and 780. Includes: multipurpose cutting guide attachment, (2) drywall cutting bits, (1) multi purpose cutting bit and instructions. Cuts through metal. Pull-twist-release accessory change. Use with either EZ402 (SKU #482.4447). Offers enhanced grip and comfort for detailed applications. Provides optimal tool control when precision is required. Repositions the weight of the tool into the palm of your hand for a balanced feel and less fatigue. Attaches onto a rotary tool in place of its nose piece for quick and easy installation. Includes detailer's grip attachment, engraving cutter, tracing stencil and instructions.
Dremel 662DR Core Glass Drilling Bit Dremel EZ456B Cut-Off Wheel Dremel EZ Lock Mini Polishing/Sanding Kit
For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions. Use to cut through metal. Pull-twist-release accessory change. Compatible with all Dremel rotary tools. For use with the EZ402 EZ lock mandrel (SKU #482.4447). Includes (3) 180, 280, & 320 grit abrasive buffs, (2) 36 & 120 grit detail abrasive wheels, (1) cloth polishing wheel and polishing compound.
Dremel EZ Lock Mini Cutting Kit Dremel 663DR Core Glass Drilling Bit Dremel 196 High Speed Cutter
Includes (4) 1-1/2" metal-cutting wheels, (3) 1-1/2" thin-cut wheels and (3) 1-1/2" plastic cutting-wheels. Use with either EZ402 (SKU #482.4447). For use on glass, ceramic wall tile, glass block, glass bottles, and jewelry. For drilling in both flat and contoured surfaces. Diamond-impregnated cutting bit. Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed. Holes on the side of the bit allow the removal of material. Includes cutting oil and instructions. A versatile, high quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. Appropriate for curved surfaces. 7/32" bit diameter (5.6 mm).
Bosch 1550 Wood Burning Tool Dremel 9929 Engraving Point Dremel 709-01 Super Accessory Kit
Features a high-efficiency bronze core heating element that heats quickly with a maximum tip temperature of 1,050 degrees F for burning and soldering capabilities. Tool stand protects tool from marking work surface. Ergonomic, stay cool design for control and comfort and a short shaft length for control of tip. Specs: 110/120 V/AC, watts 30/W, weighs 2.5 ozs. Includes: multipurpose tool, tool stand, convenient tip storage tube, general purpose tip, script tip, cutting tip, hot knife tip, soldering tip. Use this point for continuous duty or commercial work. Can also be used for decorative engraving. Use on steel, chrome, titanium, granite, and other hard substrates. Use with Dremel 290 (619.9319) engraver. Versatile and reusable accessory kit includes everything you need to cut, grind, sand, polish, drill, sharpen and clean. Includes:  1-1/4" cut off wheel, 3/4" carbon steel brush, polishing compound, (4)-four-1" felt polishing wheel, silicon carbide grinding stone, high speed cutter, 1/2"/60 grit sanding drum with mandrel, 1/4"/60 grit sanding band with mandrel, mandrel, wrench, aluminum oxide grinding stone, silicon carbide grinding stone, aluminum oxide grinding stone, (12)-twelve-15/16" emery cut off wheel, (12)-twelve-15/16" heavy duty emery .-cut off wheel, 1-1/4" fiberglass reinforced cut off wheel, (4)-four-small felt wheel, cone polishing tip, (6)-six-1/2"/60 grit sanding band, (12)-twelve- 3/4" 180 grit sanding disc, (12)-twelve- 3/4"/220 grit sanding disc, (12)-twelve- 3/4"/.240 grit sanding disc, (6)-six-1/4"/60 grit sanding band, (6)-six-1/2"/120 grit sanding band, (6)-six- 1/4"/ 120 grit sanding band, mandrel, dressing stone, bristle brush and 180 grit abrasive buff.
Dremel 7000-N/5 2-Speed Rotary Tool Kit Dremel 290 Electric Engraver Kit Dremel 568 Grout Removal Kit
Ready to go on a minute's notice. This 2-speed cordless alkaline tool is ideal for a variety of do-it-yourself jobs inside or out. Includes 5 accessories and a wrench. Rotates at 2 speeds: 6,000 rpm or 12,000 rpm. Weighs only 6 ounces. Requires 4 AA batteries, Not Included. Stroke adjustment dial regulates engraving depth from fine lines to deep grooves. Replaceable carbide points lets you engrave on most surfaces. Soft grip adds extra comfort and control. Letter/number template helps etch words and numbers. Light and compact design provides comfortable use for precision engraving performance. Amperage: 0.2; Hertz: 60; Speed: 7,200 (spm). Includes Engraver tool, Letter/number template and 9924 Carbide point. Attachments unique shape keeps the bit at the perfect cutting angle and keeps the cutting bit centered between the tiles, 30 degree cutting angle provides controlled cutting along the grout line. Special guides keep the bit centered between tiles. Large window for cut line visibility. Depth adjustment controls cutting depth up to 3/8" below the tile surface. Removes both wall and floor grout. Includes: grout removal attachment, 1/16" carbide grout removal bit and instructions.
Dremel Multipro Flexible Shaft Dremel 194 High Speed Cutter Dremel 575 Right Angle Attachment
The flexible, 36" shaft attaches easily, new 5" bend radius provides more flexibility during use. Specs: comfort grip hand piece, integrated shaft lock button, Quick connect, accepts up to 1/8" shank accessories, works with collet system and the dremel chuck. Fits tool models 400, 398, 395, 300, 285, 275 and 800. Includes: flex shaft attachment, square drive nut and instructions A versatile, high-quality cutter made of high grade steel. Ideal for shaping, hollowing, grooving, slotting and inlaying. Also ideal for making tapered holes in soft metals, plastics and woods. 1/8" bit diameter (3.2 mm). Coupling system allows you to rotate the attachment on your tool making hard to reach areas instantly accessible with the Right Angle Attachment. Specs: ball bearings and spiral bevel gears, quick connect system no tools required, compact, long-lasting and versatile. Fits tool models 400, 398, 395, 300, 285, 275, 800 and 780. Includes: right angle attachment and instructions.
Dremel 7300-N/8 Cordless Rotary Tool Kit Dremel 670-01 Mini Saw Attachment North American Tool 51832 Corded Rotary Tool Kit
Lightweight with two speeds and can be used with any Dremel accessory bit with up to a 1/8" shank. Specs: 6,500/13,000 RPM, weighs 9 oz. Includes: tool, (1) 3-hour battery charger, (1) 401 mandrel, (1) 432 1/2" 120 grit sanding band, (1) 414 small felt wheel, (1) silicon carbide grinding stone, (1) wrench. Attaches to the rotary tool in seconds with Quick Connect System. Specs: makes clean, straight perpendicular cuts up to 1/4" thick, angled throat allows for straight, perpendicular cuts, clear housing for better visibility, directional guide and lower guard retracts when not in use. Includes: mini saw attachment, rip/crosscut blade, drive adapter and instruction manual. Specs: 10,000 - 32,000 rpm, 135 W, and 60 Hz. Includes 10 grinder stone, 2 diamond bits, 3 mandrel, 36 cutting disk, sanding drum, 3 sanding drum paper, 4 polishing wheel, 2 drill bits, collet, wet stone, 36 sanding paper and spanner.
Black & Decker RTX 3-Speed Rotary Tool Kit With Case Dremel 100-N/7 Corded Rotary Tool Kit Dremel 220-01 Drill Press
Dremel 220-01 Drill Press
Our Price : $47.99
Gets the job done faster and won't bog down under load. Flip-Lock spindle lock for quick and easy accessory changes. Universal collet accepts all standard rotary tool accessories. Soft grip for no-slip comfort and control. Three speeds: 12,000 rpm. 24,000 rpm and 30,000 rpm for the best results for each job. Lightweight, single speed tool with ball bearing construction allow for cool running, quiet, smooth operation. Specs Cord length 6', speed 35,000 rpm, voltage 120 AC/50-60 Hz. Includes  Mandrel, coarse 1/2", sanding drum, dressing stone, heavy duty emery cut off wheel, 1/2" 120 grit sanding band, aluminum oxide grinding stone, silicon carbide grinding stone. Drill press, tool holder and flex shaft holder all in one, drills accurate perpendicular and angled holes. Holds your tool in place for applications like sanding and buffing, and the telescoping flex shaft holder extends to any height between 16 and 29 inches. Specs: base 56 square inches, drill depth 2 inches, fits tool models 275, 285, 300, 395, 398, 400, 780 & 800. Includes: work station attachment, mounting wrench and instructions.
Dremel MultiPro 7700-1/15 Cordless Rotary Tool Kit Dremel 200-1/21 Corded Rotary Tool Kit Dremel 3000/300-1/24 Corded Rotary Tool Kit
Compact, lightweight, medium duty cordless with lawn mower and garden tool sharpening attachment, shaft lock for easy bit changing, removable battery with 3 hour charge time. Specs: 7.2V, 2-speed (10,000 and 20,000 RPM). Accepts accessories up to 1/8" shank, weighs 12 oz. Includes: battery, 3 hour charger, accessories, storage bag  and garden sharpener. Refer to model No. 757-01 for replacement battery pack. Multipurpose cutting guide attachment, used for multiple applications on a variety of materials. Specs: 15,000 or 35,000 RPM, voltage 120/AC, 50-60/Hz, 6 ft. cord. Includes: 21 genuine Dremel accessories. Lightweight, comfort grip housing with variable speed, circle cutter/straight edge guide. Specs: voltage 120/AC, 50-60/Hz, 5,000 to 35,000 RPM, 6 ft. cord. Includes: storage case and 24 accessories.
Dremel 8000-03 Cordless Rotary Tool Kit Dremel 4000-2/30 Corded Rotary Tool Kit Milwaukee 2460-21 M12 Cordless Rotary Tool Kits
8 volt Lithium-Ion cordless rotary tool is ideal for hands on projects around the home such as finishing, intricate sanding, polishing, cleaning, engraving and more. Variable speed control allows you to set the speed of the tool to match a particular accessory to the task at hand and is designed to be used with all Dremel accessories and most threaded attachments. Variable speed from 5,000 to 30,000 rpm to match the proper speed required. High capacity battery for longer run time. Comfort grip housing for easier handling and better tool control. Includes: 401 Mandrel, 402 Mandrel, 403 Bristle brush, 407 1/2" Drum sander, 414 Felt polishing wheel (2), 421 Polishing compound, 445 1/2" 240 Grit sanding band (2), 408 1/2" 60 Grit sanding band (3), 432 1/2" 120 Grit sanding band (3), 540 1-1/4" Cut-off wheel (3), 84922 Silicon carbide grinding stone, 932 Aluminum oxide grinding stone, 952 Aluminum oxide grinding stone and wrench. Variable speed for greater versatility. High performance motor for maximum performance at all speeds. Electronic feedback for consistent speed under load. Can be used with all Dremel accessories and attachments. Specs: Cord length 6', speed 5,000 to 35,000 rpm, voltage 120 AC/50-60 Hz, weight 18.8 oz. Includes: Dremel 4000 rotary tool, circle cutter/straight edge guide, sanding/grinding guide, storage case, quick start book. Compact and lightweight. Tool runs from 5,000-32,000 RPM. Managed by a variable speed dial for fluid control. 1/8" Collet is compatible with all 1/32" - 1/8" shank accessories providing the user access to any cutting, grinding, sanding and polishing solutions. Includes rotary tool, M12 Redlithium battery, 5 cutting wheels and mandrel, wrench and 30-minute charger and carrying case.
Dremel 4000-6/50 Corded Rotary Tool Kit
Variable speed rotary tool with a slim, ergonomic body provides a 360-degree grip zone for comfort and control in any grip position. Tool can use all existing Dremel accessories and attachments plus high-performance attachments to complete the widest range of projects. Specs: Amperage 1.6 amps, Cord Length 6 ft., Speed 5,000 to 35,000 RPM, Voltage 120 AC, 50-60 Hz,Weight (lbs.) 18.8 oz. Includes: 50 assorted accessories
   
 
1