Home > HARDWARE > LOCKSETS > DOOR LOCK DEADBOLTS
Choose a sub category:
DEADBOLTS - SINGLE CYLINDER DEADBOLTS - DOUBLE CYLINDER DEADBOLTS - ELECTRONIC
DEADBOLTS - SMART / BLUETOOTH
Sort By:
1
DEADBOLT SINGLE CYL SS KA3 BOX DEADBOLT SINGLE CYL G2 DB2051 DEADBOLT SINGLE CYL S/S KA3 VP
Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4". Standard duty commercial grade constructed with a tubular steel chassis, keyed with thumb turn interior, adjustable back set and featuring a Schlage 6-pin solid brass keyway with 2 nickel keys per lock; roller bar for added security against hacksaw and reciprocating saw attacks. ANSI compliant and rated for 150,000 cycles. Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4".
DEADBOLT SINGLE CYL PB KA3 BOX DEADBOLT SINGLE CYL 6-WAY S/S DEADBOLT SINGLE CYL 6-WAY PB
Operated by key outside and turn piece inside. DOOR THICKNESS: 1-3/8" to 1-3/4" doors. BACKSET: Adjustable 2-3/8" to 2-3/4". Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes.
DEADBOLT SNGL CYL 6-WAY ANTBRS DEADBOLT DBL CYL PB KA3 BOX PK DEADBOLT DBL CYL SS KA3 BOX PK
Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Locked or unlocked by key on both sides. Locked or unlocked by key on both sides.
DEADBOLT DOUBLE CYL G2 DB2041 DEADBOLT SNGL CYL 6-WAY SATIN DEADBOLT DOUBLE CYL 6-WAY S/S
Standard duty commercial double cylinder features a tubular construction; complies with ANSI A156.5, Grade 2 (150,000 cycles). It has a 6 pin SCC keyway with 2 nickel keys per lock. Door range: 1-3/8" to 1-3/4"; has an adjustable backset. Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3.
DEADBOLT DOUBLE CYL 6-WAY PB  DEADBOLT DBL CYL 6-WAY ANT BRS DEADBOLT DBL CYLINDER S/S KA3
Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3. Locked or unlocked by key on both sides.
DEADBOLT DBL CYLINDER PB KA3  DEADBOLT SINGLE CYL GRADE2 SAT DEADBOLT DBL CYL 6-WAY SAT NIC
Locked or unlocked by key on both sides. Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through for added security. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage.  With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-1/4 STRIKES: 1" x 2-1/4" square corner. BOLT: Solid brass, steel reinforced 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3.
DEADBOLT SNGL CYL 6-WAY BRONZE DEADBOLT DBL CYL GRADE 2 SATIN DEADBOLT DBL CYL 6-WAY BRONZE
Operated by key outside and turnpiece inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through. Cylinder drilled for construction keying. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-3/8" or 1-3/4" doors. CYLINDER: 5-pin, removable, KW1 keyway, one piece solid brass; (2) nickel plated, solid brass keys. STRIKES: 1" x 2-1/4". BOLTS: Solid brass, steel reinforced, full 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 3 Standards. ADJUSTABLE LATCH: Fits 2-3/8" to 2-3/4" square corner, radius corner, or drive-in applications; 1/4" radius corner strikes. Operated by key outside and inside. All metal components. Rust resistant solid brass keyway for more security. Solid brass bolt with hardened steel rod insert to prevent sawing through for added security. DOOR PREP: 2-1/8" Crossbore, 1" Edge Bore, 1" x 2-1/4" Latch Face. DOOR THICKNESS: Fits 1-1/4" to 1-13/16" doors. CYLINDER: 6-pin, removable SC1 keyway, solid brass, one piece; re-keys to Schlage.  With 2 nickel plated, solid brass keys. FACEPLATES: 1-1/8 x 2-1/4 STRIKES: 1" x 2-1/4" square corner. BOLT: Solid brass, steel reinforced 1" throw. HANDING: Reversible for right or left hand doors. ANSI/BHMA: Exceeds Grade 2 Standards. U.L. Approved 3-Hour Fire Rating. Case formed of heavy gauge steel for strength and assures solid fit in door preparations. Most interior parts are made of solid brass for maximum strength and smooth operation. DOOR PREP: 1-5/8" and 2-1/8" as specified by model number. DOOR THICKNESS: Fits 1-3/4" doors. CYLINDER: Housing protected with free-turning exterior cylinder guard fabricated from solid brass to resist gripping or twisting. Supplied with KW1 keyway and 2 silver nickel keys. 5-pin keying. 1/2" low profile projection. FACEPLATE: 1" x 2-1/4". STRIKES: Specially designed reinforcing, constructed of high grade steel for strength and durability. Installed with 4 security jamb screws (including two 3" screws that resist tampering and guard against theft) and dust box; and is covered with an armored front to conceal fasteners. BOLT: Solid brass 1" throw, when extended, with hardened steel insert for maximum protection and security. HANDING: Non-handed. ANSI/BHMA: A 156.5 Grade 3.
   
 
1