Home > POWER TOOLS & ACC > POWER TOOL ACCESSORIES
Choose a sub category:
POWER DRILLING & ACCESSORIES DOWELING/ JIGS AND ACCESSORIES SCREWDRIVING BITS & ACCESSORIE
SAW BLADES & ACCESSORIES POWER CUTTING ACCESORIES POWER ABRASIVE ACCESSORIES
GRINDING/ CUT-OFF WHEELS & ACC
Sort By:
1
Vulcan 248721OR Jobber Length Drill Irwin 3520071C Power Bit Irwin 3512052C Insert Bit
M-35, five per cent cobalt, and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications; split point minimizes bit walk. All sizes 3/16" and larger have three flats on the shank for a better grip on chuck. Used in high torque power tools; for use in power drill chuck and chuck adapter; 1/4" hex shank. Milled, one piece made of shock resistant tool steel.
Impact Ready DW2218IR Magnetic Nutdriver Gator 3732 Resin Bonded Sanding Sheet Dewalt Standard Socket Adapter
For use in impact drivers and wrenches; industrial strength magnet maximizes fastener retention. Impact ready socket adapters can withstand up to 2000 in. lb. of torque; for high torque applications. For use with the Gator Hand Detail Sander (item no 7330) and the Black and Decker Mouse Detail sander. The quick-change hook and loop holding system allows faster sheet changes. The quick-change hook and loop holding system allows faster sheet changes. Resin-bonded to resist heat and humidity for longer life. Detail sanding sheets are specifically designed to allow you to sand in corners and tight spaces. These aluminum oxide sheets will help you get the job done right. For use with cordless impact drivers. Changes your 1/2-inch impact wrench into a 1/4-inch hex shank driver for two different tools. Impact rated for 2000 inch-to-pounds of torque.
Irwin 1789225 Carded Jobber Length Drill Dewalt DW1595 Wood Boring Spade Bit Blackstone HB71764BL Horizontal Band Saw Blade
Bit is constructed of high speed steel for the best combination of strength, heat resistance, and wear resistance; 135-degree split point reduces feed pressure and allows for easier penetration without work hardening. Can be used with screw extractors. Carded. Precision ground spade bit points drill clean holes in applications such as wood or composition board. Heavy duty hex shank prevents slipping and fits all 1/4" quick change systems; hole for bit storage and wire pulling. For popular 5-1/2in. and 4in. x 6in. horizontal band saws. Hard Back blades permit greater tension, improved blade rigidity and straighter, more accurate cuts. Wavy Tooth Style has three teeth with varying sets to the right followed by one straight tooth and three teeth with varying sets to the left. Because three teeth share the cutting and the set extends below the gullets, wavy set teeth are less likely to strip than raker set teeth.
Irwin 92335 Tamper Resistant Insert Bit Dewalt DW2169 Screwdriver Bit Set Irwin 601 Jobber Length Drill
Tamper resistant  Torox screws feature a post in the center of the recess; this post will only fit into a tamper resistant Torx bit. Used in applications such as control panels, display cases, high-tech equipment, security; 1/4" hex shank. Made of high speed steel; to be used with Impact Drivers and Wrenches. Includes 8 each: #2 phillips 1" insert bits, #2 Phillips 1" drywall reduced diameter insert bits, 1 each: impact ready 3/8" drive 9/16" deep socket, 1/4" impact ready nutdrivers, 5/16" impact ready nut drivers 3/8" impact ready socket adapter, Impact ready 3/8" drive 3/8" deep socket, impact ready 3/8" drive 7/16 deep socket, impact ready 3/8" drive 1/2" deep socket, impact ready pivoting it tip holder, 3" impact ready 3" stainless steel bit tip holder with hog ring. High speed steel bits used for general purpose drilling in wood, metal and plastic. Jobber length.
HOLE SAW WOOD CARBIDE 7PC KIT
Engineered to maximize runtime. Thin kerf design for high efficiency. Carbide teeth for long life. Self-feed pilot bit for fast, efficient cutting. Spring loaded collar automatically engages drive pins to prevent hole saws from locking to the mandrel. Kit includes: (3) hole saws - 2-1/8", 2-9/16" and 3-5/8", (1) Quick change Mandrel and (3) Self-feed Pilot bits.
   
 
1