Home > POWER TOOLS & ACC > POWER TOOLS > POWER/PRESSURE WASHERS & ACCES
Choose a sub category:
PRESSURE WASHERS - ELECTRIC PRESSURE WASHERS - GASOLINE PRESSURE WASHER CHEMICALS
PRESSURE WASHER ACCESSORIES
Sort By:
1
Valley Industries PK-85300104  Pressure Washer Quick Connect Fittings Valley Industries PK-85300105  Pressure Washer Quick Connect Fittings MI-T-M AW-0023-0491 Screw Nipple
Plated steel, 3/8" QC x FNPT, 0.10 lb. Plated steel, 3/8" QC x MNPT, 0.10 lb. Male pressure washer screw. Male nominal pipe thread x M22.
MI-T-M AW-0023-0492 Screw Nipple MI-T-M AW-0023-0493 Screw Nipple MI-T-M AW-0023-0494 Screw Nipple
Female pressure washer screw. Female nominal pipe thread x M22. Male pressure washer screw. Male nominal pipe thread x M22. Female pressure washer screw. Female nominal pipe thread x M22.
MI-T-M AW-4085-0016 Pump Oil MI-T-M AW-0017-0001 Quick Connect Adapter Valley Industries PK-14000005  Pressure Washer Screw Type Plug Fitting
Keeps pumps cooler than regular oil and is suitable for all climates. Convenient pour spout container with re-sealable cap. Oil contains rust and corrosion additives, anti-wear additives, foam suppressant and dispersant for system cleanliness. 1/4" Female x 1/4" socket. M22 x 1-1/2 thread.
MI-T-M AW-0017-0004 Quick Connect Adapter MI-T-M AW-0012-0004 O-Ring Seal MI-T-M AW-0017-0006 Quick Connect Adapter
3/8" Female x 3/8" socket. For use with 3/8" quick connect. 3/8 Female x 3/8" Plug.
MI-T-M AW-0017-0005 Quick Connect Adapter MI-T-M AW-0025-0122 O-Ring Seal MI-T-M AW-0017-0002 Quick Connect Adapter
3/8 Male x 3/8" Plug. For use with 1/4" quick connects. 1/4'' MNPT x 1/4'' quick connect plug.
MI-T-M AW-0018-0148 Detergent Nozzle MI-T-M AW-0017-0017 Quick Connect Adapter Valley Industries PK-14000007  Pressure Washer O-Ring/Filter Set
Use with detergent injector. 1/4'' FNPT x 1/4'' quick connect plug. O-rings for screw-type couplings, two each for 14 and 15mm. O-rings for quick connect, two each for 1/4" and 1/8". Two cone garden hose filters.
MI-T-M AW-0018-0028 Spray Nozzle MI-T-M AW-0018-0257 Spray Nozzle MI-T-M AW-0018-0302 Spray Nozzle
Nozzle is stainless steel with 0-degree spray pattern. Nozzle is stainless steel with 0-degree spray pattern. Nozzle is stainless steel with 0-degree spray pattern.
MI-T-M AW-0018-0260 High Pressure Nozzle MI-T-M AW-0018-0030 Spray Nozzle MI-T-M AW-0018-0304 High Pressure Nozzle
40 degrees high pressure nozzle. White. Nozzle is stainless steel with 25-degree spray pattern. 40 degrees high pressure nozzle. White.
MI-T-M AW-0018-0259 Spray Nozzle MI-T-M AW-0018-0303 Spray Nozzle MI-T-M AW-0018-0031 High Pressure Nozzle
Nozzle is stainless steel with 25-degree spray pattern. Nozzle is stainless steel with 25-degree spray pattern. 40 degrees high pressure nozzle. White.
MI-T-M AW-0018-0150 Spray Nozzle MI-T-M AW-0018-0258 Spray Nozzle MI-T-M AW-0018-0029 Spray Nozzle
Nozzle is stainless steel with 15-degree spray pattern. Nozzle is stainless steel with 15-degree spray pattern. Nozzle is stainless steel with 15-degree spray pattern.
Valley Industries PK-85241040  Pressure Washer Spray Nozzle Valley Industries PK-85201030  Pressure Washer Spray Nozzle Valley Industries PK-85201040  Pressure Washer Spray Nozzle
Fits most pressure washers with a 1/4" quick connect inlet. Fits most pressure washers with a 1/4" quick connect inlet. Fits most pressure washers with a 1/4" quick connect inlet.
Valley Industries PK-85241030  Pressure Washer Spray Nozzle Valley Industries PK-85216030  Pressure Washer Spray Nozzle Valley Industries PK-85226030  Pressure Washer Spray Nozzle
Fits most pressure washers with a 1/4" quick connect inlet. Fits most pressure washers with a 1/4" quick connect inlet. Fits most pressure washers with a 1/4" quick connect inlet.
Valley Industries PK-85300102  Pressure Washer Quick Connect Coupler Valley Industries PK-85226040  Pressure Washer Spray Nozzle Valley Industries PK-85216040  Pressure Washer Spray Nozzle
FNPT quick connect coupler. For pressure washers with quick connects. Fits most pressure washers with a 1/4" quick connect inlet. Fits most pressure washers with a 1/4" quick connect inlet.
MI-T-M AW-0017-0028 Quick Connect Adapter Valley Industries PK-85300103  Pressure Washer Quick Connect Coupler Valley Industries PK-14000004  Pressure Washer Screw Type Socket Fitting
MNPT quick connect socket. For pressure washers with quick connects. Valley Quick Connect Coupler, 3/8 in QC x FNPT, Brass M22 x 1-1/2 thread.
MI-T-M AW-0023-0487 Screw Coupler MI-T-M AW-0023-0488 Screw Coupler All-In-One ZUPPWC160 All-in-1 Pressure Washer Cleaner
Male nominal pipe thread x M22. Pressure washer screw coupler. Female nominal pipe thread x M22. Pressure washer screw coupler. Removes dirt, grease, oil, grime, road film and stains caused by algae, mold and mildew. Formulated for use on vinyl, wood brick, stucco, concrete, tile, cement, asphalt, fiberglass, stone, metal, plastics and vehicles. Concentrated formula makes up to 26 gallons.
MI-T-M AW-0017-0007 Quick Connect Adapter Karcher 9.558-998.0  Pressure Washer Accessories NOZZLE 0 DEGREE GAS POWERWASH
MNPT quick connect socket. For pressure washers with quick connects. Specially formulated to protect your pressure washer against freezing (to -25 degrees F), corrosion and premature wear. Adds lubrication to valves and seats to prevent sticking. Protects your pressure washer when not in use. Environmentally friendly. For an intense cleaning spray. Great for general cleaning applications. 3.5 GPM Orifice size. Maximum 4000 PSI. Fits most brands
NOZZLE 15 DEGREE GAS POWERWASH NOZZLE 25 DEGREE GAS POWERWASH NOZZLE 40 DEGREE GAS POWERWASH
For an intense cleaning spray. Great for general cleaning applications. 3.5 GPM Orifice size. Maximum 4000 PSI. Fits most brands For an intense cleaning spray. Great for general cleaning applications. 3.5 GPM Orifice size. Maximum 4000 PSI. Fits most brands For an intense cleaning spray. Great for general cleaning applications. 3.5 GPM Orifice size. Maximum 4000 PSI. Fits most brands
NOZZLE 65 DEGREE SOAP GAS PW  SOCKET M22 X 3/8IN FEMALE QC  MI-T-M AW-0017-0029 Quick Connect Adapter
Automatically dispenses detergent at low pressure. Reduces cleaning time. Suitable for most applications. Max 4000 PSI. Fits most brands. MNPT quick connect socket. For pressure washers with quick connects.
MI-T-M AW-0023-0489 Screw Coupler MI-T-M AW-0023-0490 Screw Coupler Krud Kutter DG01/4 Concrete and Driveway Cleaner
Male nominal pipe thread x M22. Pressure washer screw coupler. Female nominal pipe thread x M22. Pressure washer screw coupler. Contains oil grabber a unique additive which penetrates the surface to dissolve tough stains from grease, oil, algae, mildew and dirt. Ideal for use on patios, concrete, brick, masonry, driveways, sidewalks, garage and basement floors and more. Promotes the adhesion of paint, stains, sealers, and other coatings. Coverage up to 2,000 sq. ft. Earth-friendly: Water-based, Biodegradable. Non-flammable. Non-Toxic. Non-Abrasive.
Krud Kutter DF01/4 Deck and Fence Cleaner Krud Kutter VB014 Vehicle and Boat Cleaner MI-T-M AW-0017-0035 Screw Connect
Contains sporex a unique additive which removes tough stains from, mildew, mold, algae, fungus and moss and restores the original look to wood decks and fences. Dissolves the toughest stains from dirt, oil, grease, bird droppings, tree sap, and acid rain. Great for use on composite decks. Coverage up to 2,000 sq. ft. Safe and effective on all vehicles and boats. Penetrates and loosens road film, dirt, grime, algae and mildew stains without scrubbing. No bleach or ammonia formula. Contains anti-corrosive agents to safeguard pressure wash parts. Biodegradable safe for people, pets and plants. Converts MPT fittings to M22 Metric. Includes: (1 each) screw connect M22 x 3/8FNPT and screw nipple - 3/8FPT x M22 - 14MM.
MI-T-M AW-0016-0381 Adjustable Variable Nozzle Valley Industries PK-85202026  Molded Wand Extensions MI-T-M AW-0016-0366 Pressure Washer Wand with Quick Connect Nozzles
Adjustable replacement wand for model No. CV2400 pressure washer and many other branded units with 1.2mm, M22 center connect. This nozzle controls the high pressure spray patterns from 0 to 60. Plated steel lance with insulated grip. For use with hot or cold pressure washers. 1/4" MNPT inlet and outlet. Weight 1.32 lb. Pressure washer wand with quick connect to accept spray nozzles. 1/4'' female socket outlet.
Valley Industries PK-16000000  Pressure Washer Variable Nozzle MI-T-M AW-0851-0096 Pressure Washer Wand with Handle MI-T-M AW-0016-0364 Pressure Washer Gun
Best performance with 1,000 to 3,000 PSI pressure washers. 3,000 PSI maximum pressure, 1.58-3.12 GPM maximum flow. 140 degrees F maximum temperature. 1/4" FNPT inlet. 0.34 lb. Rental. 1/4" MNPT. Spray gun for pressure washers. Insulated pro style trigger with safety lock. Stainless steel shaft. Screw connection. Brass couplers. 4,000 psi.
MI-T-M AW-0016-0365 Trigger Gun NOZZLE VARIABLE GAS POWER WASH LANCE STNLS STL GAS PW 24IN
For use with all CV units. Quickly adjust the spray pattern of your pressure washer. Perfect complement to VersaGrip spray gun. Max 4000 PSI. Fits most brands. 24" stainless steel wand. M22 connection. 1/4" quick connect. Max 4000 psi. Fits most brands.
MI-T-M AW-0015-0239 Extension Hose KARCHER 2.643-005.0 Rotating Wash Brush Karcher 8.922.793.0/2.64 Pressure Washer Accessories
Replacement high pressure hose rated at 3000 p.s.i. Use on automobile, boat, house siding, shutters, windows and other flat surfaces. Water pressure from the pressure washer cause the inner brushes to gently spin, making it easier to remove stubborn dirt and debris. Designed for Karcher electric pressure washers. Set of 5 Karcher quick connect high pressure spray nozzles. Use to replace damaged nozzles or to upgrade to a complete set. Fits Karcher gasoline pressure washers with quick connect fittings with a rating of 26000 PSI to 3100 PSI. Set includes: 0 degree red, stainless steel, concentrated pencil jet, 15 degree yellow, stainless steel, high performance, 25 degree green, stainless steel, multi-purpose, 40 degree white, stainless steel, sensitive surfaces and 65 degree black, low pressure detergent application.
NOZZLE TURBO ELECTRIC 2000PSI Valley Industries 25TPR14-M22 Pressure Washer Accessories KIT BRUSH WASH UNIV KARCHER
Designed for pressure washers up to 2000 PSI with a Quick-Connect spray wand. Increases cleaning speed by up to 50 percent. Easy to use. Just snap into the quick connect on your spray wand (Spray Wand Not Included). Steel wire and fabric reinforced, 1/4" with M22 screw-type fittings. 2,600 PSI maximum pressure. Universal rotating brush kit. Made with super soft synthetic bristles to safely clean painted topcoat and delicate surfaces.
NOZZLE 6-IN-1 QC GAS POWERWASH KARCHER 2.642-191.0 Vario Power Spray Wand NOZZLE TURBO GAS POWERWASH
NOZZLE TURBO GAS POWERWASH
Our Price : $37.99
Quickly change spray patterns to match your cleaning application. Includes 0?, 15?, 25?, 40?, rinse and soap nozzles. Max 4000 PSI. Fits most brands. Serves as a replacement or upgrade for existing Vario power spray wands. Dial in the desired amount of pressure on the wand. Permits infinitely variable pressure adjustment. Increases cleaning power by up to 50 percent. Perfect for hard to clean surfaces like driveways, asphalt, concrete and stone. Not For Delicate Surfaces. Max 4000 PSI. Fits most brands.
GUN TRIGGER GAS PW KARCHER    MI-T-M AW-0016-0001 Pistol Grip Trigger Gun Valley Industries RJ-3030-CS  Pressure Washer Rotary Nozzle
GUN TRIGGER GAS PW KARCHER
Our Price : $37.99
4000 psi trigger gun. M22 hose connection. Safety lock. 140? F/ 60? C. Fits most brands. Replacement pistol grip gun. 4000 p.s.i. capability. Quick connect 1/4" inlet ceramic nozzle. 130 degrees F maximum temperature.
Valley Industries PK-12000000  Pressure Washer Spray Gun MI-T-M AW-8400-0021 Low Pressure Detergent Injector Hyde 28430 Pivot Head Single Pressure Washer Wand
For hot and cold water applications. Comes with 3/8" male QC plug & male screw-type adapters. Maximum temperature 210 degrees F, maximum flow 10.5 GPM, outlet 1/4" FNPT, inlet 3/8" FNPT, weight 1.41 lb. Allows application of recommended detergents. For use on cars, boats, van and engines. Solid brass body with stainless-steel orifice for durability, clear, pliable detergent nozzle with adjustable chemical draw and quick connects for easy installation. Heavy-duty, lightweight housing, chrome plated steel shaft for durability and corrosion resistance. Head pivots 90 degrees direct power where you need it every time. Twist grip control directs nozzle and locks in place with one hand.  Soft touch, rubberized grips for non-slip control.
KARCHER 2.642-451.0 Deck and Drive Brush Krud Kutter HS01/4 House and Siding Cleaner Karcher 2.640-741.0  Pressure Washer Accessories
Karcher's T300 Surface Cleaner tackles large surface cleaning tasks in no time. Comfortably clean decks, garage floors, driveways and patios with ease. With a large 11" diameter cleaning head, variable pressure dial and 32" wand extension. Locking joint allows extension wands to lock vertically for breaks or compact storage. Works with all Karcher branded electric pressure washers. Removes dirt, grease, oil, and mildew stains. Contains "SPOREX"  additive which removes tough stains from mildew, mold, algae, fungus and moss. For exterior siding, roofing of all types, gutters, stucco, brick and cement block, masonry, walkways and walls. Covers up to 2,000 sq. ft. Water-Based. Bio-degradable. Non-flammable. Non-toxic. Non-abrasive. An angled spray lance that is ideal for cleaning tire walls, roof gutters and other hard to reach areas. The 90 degree angle on the end of this metal wand makes it easy to clean the roof area of trucks, SUV's, vans, RV's etc, as well as remove mud and other debris from tire walls. The right angle wand performs double duty by also cleaning gutters, especially when paired with a Karcher extension wand, easily forcing leaves and other obstructions out of the gutter using nothing more than water pressure. 30" long assembled. Works with Karcher electric pressure washers.
MI-T-M AW-0050-0176 Pressure Washer Hose Krud Kutter PWC01/4 Pressure Washer Cleaner Karcher 2.642-582.0  Pressure Washer Accessories
High quality, high pressure hose designed to use with cold water pressure washer applications at designated max. rated pressure. Abrasion resistant, non marking outer cover. 3,500 PSI max. rated pressure. High tensile strength steel wire braiding. Inner tube composed of chemical resistant synthetic rubber. Includes: M22 x 14mm male and female screw connects. Use on exterior siding, roofs, gutters, RV's, boats, driveways and patios. Removes dirt, grease, oil, and mildew stains. Contains anti-corrosive agents to protect o-rings. No bleach or ammonia, safe for people, pets and plants. No scrubbing. Spray-on. Wash-off. Can be used on all types of house exteriors. One gallon cleans 2,000 sq. ft. The hard surface PS40 power scrubber has three integrated high pressure nozzles and a stiff bristle design for removing tough to remove dirt and stains quickly and efficiently. Suitable for a wide variety of surfaces and ideal for scrubbing steps and edges. Broom like action makes cleaning easy. For Karcher pressure washers and bayonet connectors. Fits Electric electric units up to 1850 psi.
KARCHER 2.641-005.0 T-Racer Deck and Drive Brush Hyde 28440 Pivot Head Pressure Washer Wand MI-T-M AW-7300-0003 Rotating Nozzle
For cleaning surfaces such as patios, decks and driveways without splashback. Cleans 12" wide area gently as it hovers. Eliminates streaks by keeping its two nozzles at a fixed  height from the surface. Works with Karcher gasoline pressure washers rated 2400-2650 PSI. Heavy-duty, lightweight housing, chrome plated steel shaft for durability and corrosion resistance. Head pivots 90 degrees direct power where you need it every time. Twist grip control directs nozzle and locks in place with one hand.  Soft touch, rubberized grips for non-slip control. Pressure washer rotating nozzles increase cleaning power and decrease cleaning time. They offer 0 degrees spray impact with 25 degrees coverage. Nozzles are quick connects with filter and offer heavy duty components for long life and reliability.
MI-T-M AW-7300-0004 Rotating Nozzle Bissell 1119 Powerwasher Booster Valley Industries PK-85210190  Pressure Washer Rotary Nozzle
Pressure washer rotating nozzles increase cleaning power and decrease cleaning time. They offer 0 degrees spray impact with 25 degrees coverage. Nozzles are quick connects with filter and offer heavy duty components for long life and reliability. Ideal for driveways, decks and siding. Safe for use near pools, plants, lawns and shrubs. Quick connect 1/4" inlet ceramic nozzle. 130 degrees F maximum temperature.
MI-T-M AW-0851-0338 Quick Connect Extension Hose Abbott 1190-0375-50  Pressure Washer Hoses Valley Industries PK-85238151  Pressure Washer Accessories
High pressure hoses are chemical resistant, non-marking, wire braided and include quick connects, swivel and bend restrictors. 50'x 3/8" I.D. Durable rubber with wire reinforcement. 3000 PSI rating. 3/8" male ends, one side swivel. Steel wire reinforced, 3/8" with 1/4" brass quick coupler and plug. Cut and burn resistant. 4,000 PSI maximum pressure. 200 degrees F maximum temperature.
MI-T-M AW-7018-1200 Extended Reach Wand Karcher 9.558-124.0  Pressure Washer Accessories PRESSURE WASH ELEC CUBE1700PSI
For use in cleaning hard to reach places, siding, house eaves, farm equipment, semi-tractor trailers, multi-story buildings. Lightweight fiberglass housing is easy to control, complete with quick connects, easy hose retraction, professional-grade trigger gun with safety lock-off. Extends from 6' to 12'. Compatible with all makes of pressure washers rated up to 4000 PSI. Quick connect style extension hose. Constructed of commercial grade rubber. This high pressure hose extension withstands pressure up to 4400 psi and resists kinks. Designed to work with Karcher G-K and HD series gasoline pressure washers. This hose is not compatible with electric pressure washers as a replacement hose, but can be used as an extension hose on any model. Includes 4 metal adapters. 1700 PSI, 1.2 GPM electric pressure washer with convenient on/off switch. Compact design takes up little storage space; Only 12" tall and weighs less than 20 lbs. Includes 3 nozzles: turbo nozzle for maximum cleaning power on stubborn areas, 15 degree all-purpose nozzle and detergent nozzle. Heavy duty frame and all metal hose connections for maximum durability. Onboard detergent tank for easy use. Compatible with industry standard pressure washer accessories. Easy 5 minute setup: No tools required.
KARCHER 1.601-176.0 Corded Pressure Washer Carcare Kit PRESSURE WASHER ELEC 1700PSI  Karcher 1.418-050.0 K3 Follow Me Pressure Washers
PRESSURE WASHER ELEC 1700PSI
Our Price : $149.99
Pressure washer is light weight with minimal storage requirements, certified for safety by CSA International, perfect for condos, townhomes and urban neighborhoods. Specs: 120 V/60 Hz, operating pressure 1600 PSI, water volume 1.3 GPM, direct-drive axial pump, maximum water inlet temp 104 degrees F, weight (w/o accessories) 14 lbs, dimensions 10" Lx12" Wx 20" H. Includes: 20 ft. high pressure hose, accessory bag, bayonet trigger gun with child safety lock, bristle brush, detergent injector, spray wand, dual purpose sponge, soap pac sample, soft clean wash brush, variable power spray wand, wheel rim brush. 1700 psi, 1.2 GPM electric pressure washer with convenient on/off foot switch. Folding handle for compact storage, takes up less garage space.  Includes 3 nozzles: turbo nozzle with maximum cleaning power on stubborn areas, 15 degree all purpose nozzle and detergent nozzle. Large removable bin for hassle-free storage of accessories and personal items. Easy 5 minute setup; no tools required. Heavy duty frame and all metal hose connections for maximum durability. Removable detergent tank for easy use and cleanup. Compatible with industry standard pressure washer accessories. Follows as you clean over and around most obstacles and surfaces like concrete drives, gravel paths, lawns and gardens, stone and brick patios and wood or composite decks. Molded trigger gun storage securely stores trigger gun. DirtBlaster spray wand provides ideal pressure. Quick connect system on hose connection makes set up fast and easy; simply push and click into place. On board removable detergent tank. Child safety lock to prevent damage to pressure washer. Durable, non-corrosive polymer self priming/siphon capable; draw from a standing or collected water source. Unique four wheel base with oversized rear wheels and durable front casters. Vario power spray wand adjusts water pressure level right at the wand. Pressure washer holds all on board attachments to keep everything you need within reach.
PRESSURE WASHER ELEC 1800PSI  PRESSURE WASHER ELEC 1900PSI  PRESSURE WASHER ELEC 2000PSI
PRESSURE WASHER ELEC 1800PSI
Our Price : $179.99
PRESSURE WASHER ELEC 1900PSI
Our Price : $229.99
PRESSURE WASHER ELEC 2000PSI
Our Price : $249.99
1800 psi, 1.2 GPM electric pressure washer. Folding handle for compact storage. Takes up less garage space. Convenient on/off foot switch. Includes turbo nozzle with maximum cleaning power. Perfect for use on stubborn areas. Large removable bin for hassle free storage of accessories and personal items. Easy 5 minute set up; no tools requires. Heavy duty frame and all metal hose connections for maximum durability. Removable detergent tank for easy use and cleanup. Compatible with industry standard pressure washer accessories. Delivers 1900 psi of TruPressure cleaning power, ensuring you get the pressure stated on the box. It includes advanced convenience features such as a unique on/off switch, a handy storage bin, a large removable detergent tank (1 gallon), four spray nozzles (including a turbo nozzle for intense cleaning) and a unique storage system for the electric cord. Metal hose connections and a metal frame make this unit highly durable. Best of all, no tools are needed for assembly. You can set up and start using the K1900 in 5 minutes or less. When you're done cleaning, simply fold down the handle for compact storage. Water volume (GPM) 1.3 maximum. Weight without accessories 39.3 lbs. Dimensions: 18.25"L x 19"W x 35.5"H. Delivers 2000 PSI of TruPressure, ensuring you get the highest level of cleaning power. Folding handle for compact storage, takes up less garage space. Convenient off/off switch. Pressurized hose reel for convenient use and storage of the high pressure hose. Includes turbo nozzle with maximum cleaning power perfect for use on stubborn areas. Large removable bin for hassle free storage of accessories and personal items. Easy 5 minute set up; no tools required. Dual removable detergent tanks with selector switch. Compatible with industry standard pressure washer accessories.
MI-T-M CV Cold Water Powered Pressure Washer MI-T-M CM Cold Water Powered Pressure Washer PRESSURE WASHER GAS 3000PSI
PRESSURE WASHER GAS 3000PSI
Our Price : $399.99
This versatile pressure washer is the first choice for many homeowners. This handy unit is safe and completely portable to reach as far as your garden hose will take you. Direct drive axial piston AR pump with aluminum manifold. Built-in low pressure detergent injection. Thermal relief valve pump protection. In-line water strainer. The frame has a contoured design base plate with reinforced engine platform. Large 1-1/4" powder coated steel tube with removable handle for durability and easy storage. Hose wrap and quick release gun/wand holder. Large 12" semi-pneumatic tires for increased stability and maneuverability. Convenient nozzle holder. Dual rubber isolators. Unit Includes: Professional-grade trigger gun, 36" two piece lance, 30' x 1/4" nylon braided pressure hose. Quick connect nozzles (15 and 25 degree and detergent nozzle). Dimensions: 26"L x 18" W x 38"H. Weighs 54 lbs. Pump: Direct drive axial pump on SKU# 298.7766 and direct drive crankshaft pump on SKU#548.2690; Stainless-steel and brass unloader; Built-in low pressure detergent injection; Fixed pressure; Thermal relief valve pump protection; In-line water strainer. Engine: Mi-T-M Series engine with low oil shutdown. Frame: 1-inch powder coated steel tube handle for easier handling; Solid steel axle; Dual rubber isolators; Powder coated steel base plate; Quick release gun/wand holder and hose wrap. Includes quick connect nozzles (15-degrees and 25-degrees and detergent nozzle), 25' x 3/8" wire braided pressure hose, professional-grade insulated trigger gun with safety lock-off and 36" lance. Carb compliant. Cool running OHV Kohler engine with oversized muffler for reduced noise. Easy pull ergonomic recoil handle makes starting easy. Axial cam pump with brass head. Folding handle for compact storage. Onboard detergent tank. Pneumatic tires with metal wheels. Welded steel frame. 5 Pro-style quick connect nozzles (0?, 15?, 25?, 40? and 65?/detergent). Upright design with small storage footprint.
MI-T-M CM Cold Water Powered Pressure Washer MI-T-M CA Cold Water Powered Pressure Washer PRESURE WASHER GAS 3500PSI
PRESURE WASHER GAS 3500PSI
Our Price : $1,049.99
Pump: Direct drive axial pump on SKU# 298.7766 and direct drive crankshaft pump on SKU#548.2690; Stainless-steel and brass unloader; Built-in low pressure detergent injection; Fixed pressure; Thermal relief valve pump protection; In-line water strainer. Engine: Mi-T-M Series engine with low oil shutdown. Frame: 1-inch powder coated steel tube handle for easier handling; Solid steel axle; Dual rubber isolators; Powder coated steel base plate; Quick release gun/wand holder and hose wrap. Includes quick connect nozzles (15-degrees and 25-degrees and detergent nozzle), 25' x 3/8" wire braided pressure hose, professional-grade insulated trigger gun with safety lock-off and 36" lance. Carb compliant. Aluminum pressure washer is lightweight, yet durable unit that is also extremely easy to handle. The engine has low oil protection and a direct drive triplex piston pump with ceramic plungers, adjustable pressure and a forged brass manifold. Specs: 2400 psi, 2.4 gpm, 196cc engine is Honda ohv, 39" L x 20.5" W x 24.5" W, weight 73 lbs. Includes: thermal relief valve, stainless steel and brass unloader, in line water strainer, insulated trigger gun with safety lock off  and a 36" lance with rubber grip. Rental. Driven by a powerful Honda GX 200 engine, the G 3500 OHT is the perfect work companion for contractors and demanding users. Equipped with a 3 piston crankshaft (triplex) pump with professional grade unloader valve, this unit can handle the largest and most challenging cleaning assignments. Pros will appreciate the 25' steel-braided rubber high pressure hose and pneumatic tires with metal wheels. Durable 18 gauge welded frame is powder coated to resist corrosion . Includes the VersaGrip spray gun. Quick connect for easy set up and storage.
MI-T-M JP Cold Water Powered Pressure Washer Karcher North America 1.194-801.0 Pressure Washers MI-T-M JCW Cold Water Powered Pressure Washer
Washer is constructed with mild steel and features an extended handle design, Direct drive triplex piston pump with ceramic plungers and engine with low oil protection. Specs; 3000 psi,  3.0 gpm, 270cc engine is Honda OHV, dimensions are 40" L. x 22.5" W. x 24.5" H., weight 130 lbs. Includes: thermal relief valve, in-line water strainer, convenient hose wrap and gun/wand holder, dual rubber isolators, steel axle, quick connect nozzles (0, 15, 25 degrees), 50' x 3/8" non-marking hose with quick connect, swivel, and bend restrictors, insulated trigger gun with safety lock-off, 36" lance with rubber grip. Rental. 3.6 gpm Honda engine and a commercial grade brass head pump. Designed with non-corrosive tempered hardened steel pistons and swash plate pump. This produces less vibration and prolongs motor life. Industrial grade, stainless steel spray wand with quick connect adapter and integrated remote pressure control. Detergent injector siphoning tube. Trigger gun with child safety lock. Comes with 5 pro-style quick connect nozzles: 0, 15, 25, 40 and 65 degrees. Washer features a professional grade insulated trigger gun with safety lock-off, thermal relief valve, adjustable pressure, engine with low-oil protection, stainless steel and brass unloader, forged brass manifold and a convenient hose wrap. And belt drive triplex piston pump with ceramic plungers. Specs: 3500 psi, 3.7 gpm, 389cc Honda OHV engine. Dimensions 39.5" L x 28.5" W x 26" H, weight is 191 lbs. Includes: powder-coated-steel tube handles, powder-coated-steel baseplate with welded reinforcement, gun/wand holder for convenient storage, dual rubber isolators, quick connection nozzles (0, 15, 25 and 40 degrees), 50 foot x 3/8" non-marking hose with quick connects, swivel, and bend restrictors, 48" lance with rubber grip.
   
 
1