Home > PLUMBING > ROUGH PLUMBING SUPPLIES > WATER HEATERS
Sort By:
1
WASHER WATER HEATER SUPPLY    Danco 88493 Water Heater Washer Camco 11523 Drain Valves
Designed to be used with a 3/4" diameter supply connector to seal the connection. 13/16 x 1" Water heater supply line washer. Permanent installation, fits directly into water heater for easy draining. 2-1/2" length.
Camco Mfg 11061 Dip Tube Camco 07133 Element Gasket Kit Camco 10623 Dielectric Nipple
Anti-siphon hole breaks damaging siphon action. Can be cut to desired length. Made of PEX. With gasket. Everything needed to install flat, screw-in and universal flange elements. Contains:  (1) screw-in gasket, (1) universal flange gasket, (1) four hole gasket and (4) 1/4" - 20 x 3/4" hex bolts. For water heater inlet and outlet hook-ups and other uses where dissimilar metals occur in piping and plumbing systems. Thermoplastic lining prevents corrosion. 2-1/2" length.
B and K 168-003NL Dielectric Unions Camco 10862 Side Mount Runoff Tube B K Industries 168-004NL Dielectric Unions
Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. Presents a rigid surface for gripping with standard wrenches. Can be cut to desired length. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
Camco 2143 High Watt Density Water Heater Element B and K 167-004NL Dielectric Unions Camco 07223 Adapter Kit
UL Listed, gasket included. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18. Contains: (1) 2-1/2" 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16" - [no. 18] 5/8" hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit.
B and K 102-816 Water Heater Drain Valves WaterFlex 0437012 Corrugated Flexible Water Heater Connector B and K Industries 168-005NL Dielectric Unions
1-1/4" shank length. Heavy brass construction. Neoprene seal disc. 3/4" hose threaded outlet. Plated steel canopy handle. Pipe threads comply with ANSI B1.20.01. Hose threads comply with ANSI B1.20.7. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Rated for 250 PSI at 180DegF. Threaded ends comply with ANSI B1.20.1. Solder ends comply to ANSI 16.18.
Camco 9973 Quick Change Element Tool Camco 2343 High Watt Density Water Heater Element Camco 11260 Drain Pan With 1 in PVC Fitting
Turn off electric change you element without draining your water heater, by turning off water at the water heater to create a vacuum. Remove wires from element put quick change tool on neoprene nub behind element add bucket or basin, have new element handy take out and replace you should not lose more then 2" of water. UL Listed, gasket included. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Camco 7723 Dual Element Lower Water Heater Thermostat Camco Mfg 10473 Pressure Relief Valve 3/4 In Therm-O-Disc 8123 Dual Element Lower Water Heater Thermostat
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. 3/4" temperature and pressure relief valve with 4" probe. All brass body, stainless steel spring,  factory set at 150 PS, crafted with no gaskets and epoxy-coated probes to prevent corrosion buildup. ANS Z21.22 design, AGA certified, furnished with test lever. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
WaterFlex 0437018 Corrugated Flexible Water Heater Connector Camco 10023 Water Heater Continuity Tester With Battery Camco 2293 High Watt Density Water Heater Element
Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. Test your elements and thermostats while still in the water heater. 1 piece. UL Listed, gasket included.
Camco 2203 High Watt Density Water Heater Element Camco 2283 High Watt Density Water Heater Element Camco 4363 High Watt Density Water Heater Element
UL Listed, gasket included. UL Listed, gasket included. UL Listed, gasket included.
Camco 2243 High Watt Density Water Heater Element Camco 11460 Drain Pan With 1 in PVC Fitting CopperFlex WB00-12N Water Heater Connector
UL Listed, gasket included. For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Camco 11360 Drain Pan With 1 in PVC Fitting Cash Acme U3088FLEX12LF Braided Flexible Water Heater Connector Camco 10063 Water Heater Connector
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Seamless corrugated 18" flexible copper water connectors. 125 PSI maximum.
Camco 2263 High Watt Density Water Heater Element Camco 4523 High Watt Density Water Heater Element Camco 4383 High Watt Density Water Heater Element
UL Listed, gasket included. UL Listed, gasket included. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 4503 High Watt Density Water Heater Element Camco 4483 High Watt Density Water Heater Element Camco 3943 High Watt Density Water Heater Element
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. UL Listed, gasket included.
Camco 2223 High Watt Density Water Heater Element Camco 01023 Flapper Style Dielectric Heat Trap Camco 4603 High Watt Density Water Heater Element
UL Listed, gasket included. Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4" MPT x 3/4" MPT x 3" length MIP. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed.
Camco 11400 Drain Pan With 1 in PVC Fitting CopperFlex WB00-15N Water Heater Connector WaterFlex 0437024 Corrugated Flexible Water Heater Connector
For electric water heaters only. Heavy duty polypropylene. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report. Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
VALVE VACUUM RLF LD FREE 1/2IN Cash Acme U3088FLEX15LF Braided Flexible Water Heater Connector Camco 4703 Low Watt Density Water Heater Element
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. UL Listed, gasket included.
Camco 2163 High Watt Density Water Heater Element Watts LL100XL-150/210 Temperature/Pressure Relief Valve Camco 2583 Low Watt Density Water Heater Element
UL Listed, gasket included. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). UL & CSA listed, gasket included.
Watts 100XL Temperature and Pressure Relief Valve Cash Acme U3088FLEX18LF Braided Flexible Water Heater Connector CopperFlex WB00-18N Water Heater Connector
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
VLV TMP/PRS RLF NCLX-LX 3/4IN Camco 23503 Dielectric Union Camco 9953 Professional Element Socket
Ffeatures include a cast bronze body, brass and stainless steel internal parts, silicone seat disc and stainless steel spring. The NCLX incorporates an inert thermal element coating that provides effective isolation from mineral deposits (liming). The NCLX comes standard with a test lever. The valve is completely automatic and reseats after either temperature or pressure relief. 1-1/4" shankd MNPT inlet x FNPT outlet. Use wherever dissimilar metals occur in piping and plumbing systems. Use in water heaters that are pressure rated to 350 PSI, water storage tanks, gas piping, air conditioning, water conditioners, oil piping, water pumps, steam lines. Fits standard 1/2" socket drive to replace screw-in water heater elements.
Camco 2363 High Watt Density Water Heater Element Camco 4803 High Watt Density Water Heater Element Watts 100XL Temperature and Pressure Relief Valve
UL Listed, gasket included. High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar).
Fluidmaster B1H12 Water Heater Connector Cash Acme U3088FLEX24LF Braided Flexible Water Heater Connector CopperFlex WB00-24N Water Heater Connector
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connections are 3/4" FIP x 3/4" SharkBite. Connects to copper, PEX, and CPVC tubing. Internal dielectric sleeve effectively separates dissimilar metals within the waterway to prevent galvanic and electrolytic corrosion. Nitrile rubber washer is more resilient than PEX and easier to install on rough nipple surfaces. A greater number of thread to thread contact provides a better seal to lined nipples. Specially engineered brass adapter allows direct connection to PEX pipe.  Design-certified and manufactured in accordance with ANSI/ASME A112.18.6, ANSI /NSF-61 (Section 9), CSA B125, UL Laboratories MH25826 report, and NES NER-615 report.
Plumb Pak PP888-10LF Water Heater Connector Plumb Pak PP888-1LF Water Heater Connector VLV TMP/PRS RLF NCLX-5 3/4IN
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 12 in Length, Stainless Steel Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 12 in Length, Stainless Steel Ffeatures include a cast bronze body, brass and stainless steel internal parts, silicone seat disc and stainless steel spring. The NCLX incorporates an inert thermal element coating that provides effective isolation from mineral deposits (liming). The NCLX comes standard with a test lever. The valve is completely automatic and reseats after either temperature or pressure relief. 1-1/4" shankd MNPT inlet x FNPT outlet.
Watts 100XL-8-150 Temperature and Pressure Relief Valve Fluidmaster B1H18 Water Heater Connector Fluidmaster B4H18 Water Heater Connector
Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Fluidmaster B2H18 Water Heater Connector Camco 20800 Drain Pan With 1 in PVC Fitting Fluidmaster B3H18 Water Heater Connector
Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty.
Camco 11572 Anode Rod Fluidmaster B1H24 Water Heater Connector Camco 08143 Replacement Single Element Water Heater Thermostat
Preserve the life of the water heater by corroding themselves so the water heater doesn't. Easy to install. Replace the drain plug with the product to protect the tank. 5/8" outside diameter. 42" long. Each foot of No-Burst contains 250 feet of stainless steel wire. Non toxic polymer core resists chlorine and chloramines. Tightly sealed cone washers. Easy to grip, exceptionally flexible nickel plated brass hex nuts. Exceeds all plumbing code requirements. Meets agency standards. IAPMO Standard, PS74-95, CSA, SBCCI, FDA, NSF-61, A112.18.6 and UPC. 10 year warranty. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Camco 4643 High Watt Density Water Heater Element Plumb Pak PP888-3LF Water Heater Connector Camco 20840 Drain Pan With 1 in PVC Fitting
High watt density elements, (150 plus watts per square inch). Gasket and detailed instructions included. 240 volts. UL listed. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 18 in Length, Stainless Steel For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Camco 7863 Dual Element Upper Water Heater Thermostat With HLC Camco 7843 Single Element Water Heater Thermostat With HLC Camco 08163 Adjustable Water Heater Upper Thermostat
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating. UL Listed. Meets original specifications length for Rheem, Ruud, Richmond, A.O.Smith, American and GSW. Energy efficient range setting, built-in safety switch to prevent overheating.
Camco 09423 Replacement Gasket Kit Watts 100XL-8-125 Temperature and Pressure Relief Valve Camco 10493 Temperature and Pressure Relief Valves
Fits Richmond, Rheem, Ruud, Vanguard and General Electric brand water heaters. Kits contain burner access door gasket, #20 Torx-head tool, four torx-head screws, and four J-style clip-on nuts. Used in water heater and hot water storage tank applications to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. Features a bronze body with NPT male inlet and NPT female outlet connections, unique thermostat with special thermo-bonded coating, and a test lever. ASME rated and CSA listed. Temperature Relief: 210 degrees F (99 degrees C), Pressure Relief Range: 75 to 150psi (5.2 to 10.3 bar). Setting: of 150 PSI / 210 Deg F., stainless steel spring, all brass body, ANS Z21.22 design, AGA certified, epoxy coated extension probe.
Camco 20830 Drain Pan With 1 in PVC Fitting Plumb Pak PP888-4LF Water Heater Connector Plumb Pak PP888-11LF Water Heater Connector
For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP Connection, 24 in Length, Stainless Steel Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 18 in Length, Stainless Steel
DRAIN PAN WASHMACH WHITE W/PVC Camco 20810 Drain Pan With 1 in PVC Fitting WaterFlex 0437118 Corrugated Flexible Water Heater Connector
For front-loading machines. High impact white polypropylene. 31" x 35" OD and 29" x 33"ID. 1-1/2" PVC drain. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting. Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP.
Cash Acme 22441LF Sharkbite Cash Acme 22604LF Sharkbite Water Heater Installation Kit M-D 04663 Water Heater Insulation Blanket
Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip. Features push-fit fittings that allow for instant push-fit connection for increased ease-of-use - no soldering required. Fittings are certified to 200 PSI and 200 degrees F. (93 degrees C.). Fits OD controlled copper, CPVC, or PEX pipe. Includes disconnecting clip that disassembles quickly in case of installation error. Contains an integral tube support liner that is effective in supporting PEX tubing to ensure secure, reliable connection. Compact, robust DZR brass body. No loose components, integrated design.  Design certified to IGC 188. Listed by IAPMO and are certified for potable and hydronic heating water distribution. Certified for underground applications and as a manufactured joint without access panels. Meets UPC, IPC, and cUPC requirements. Certified to ANSI/NSF-61 product standard for use in potable water systems. Includes FNPT Push-Fit Fitting and demount clip. White vinyl backed fiberglass blanket. Designed for gas, oil or electric heaters. Fits up to 60 gallons. Includes adhesive tape for easy installation. Bagged.
Quick R B5-69 Water Heater Insulation Jacket Camco 2903 Ultra Low Watt Density Water Heater Element Camco 2853 Ultra Low Watt Density Water Heater Element
Reduces heat loss from water tank. R value equals 6.7. Will insulate up to a 60 gallon tank. 2" x 48" x 75" blanket per bag. UL Listed, gasket included. UL Listed, gasket included.
Plumb Pak PP888-12LF Water Heater Connector Thermwell SP57/11C Insulation Blanket Camco 2923 Ultra Low Watt Density Water Heater Element
Plumb Pak Water Heater Connector, 3/4 in Nominal, FIP X MIP Connection, 24 in Length, Stainless Steel 3" x 48" x 75" vinyl faced fiberglass water heater insulation blanket, R value 10.0, fits up to 60 gallon tank, plastic tape. For gas, oil or electric water heaters. UL & CSA listed. Gasket included. Best when water has high mineral content, withstands dry firing, heats in lime and sand buildup that would burn out ordinary elements, highest grade nickel and chromium incoloy,
Camco 10193 Water Heater Connector Kit WaterFlex 0437124 Corrugated Flexible Water Heater Connector Camco 20860 Drain Pan With 1 in PVC Fitting
Contains: (2) 3/4" x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll teflon tape. Red and blue epoxy coated connectors with nickel plated brass nuts and nitrile rubber sealing washers. Complies with no-lead laws. 3/4" FIP x 3/4" FIP. For gas or electric water heaters. Dual size 1 inch to 1.5 inch PVC drain fitting with gaskets included. Sides are 2.5 inches deep. Pre-cut side opening for drain fitting.
Camco 4943 Ultra Low Watt Density Water Heater Element Watts 374A Boiler Pressure Relief Valve Camco 2723 Low Watt Density Water Heater Element
Best when water has high mineral content. Withstands dry firing. Heats in lime and sand buildup that would burn out ordinary elements. Highest grade nickel and chromium incoloy alloy. Ultra low-watt density (50 watts per square inch). UL & CSA listed. Used in hot water boiler applications to protect against excessive pressure on all type of hot water heating boiler equipment. Iron body construction with forged bronze inlet connections, non-metallic disc-to-metal seating, stainless steel spring and test lever. Standard pressure setting: 30 psi, pressure range: rated up to 550,000 BTU/hr at 30 psi (2 bar) setting only. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1").
Cash Acme U3068FLEX18BVLF Braided Flexible Water Heater Connector Eastman 60022/DET-5 Thermal Expansion Tank DRAIN PAN W/H 32IN ID ALUMINUM
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connects to copper, PEX, and CPVC tubing. Used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm, and brass 3/4 in. (20mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum Pressure: 150psi (10 bar). Aluminum pan for gas or electric water heaters, 32" internal diameter, will not rust or crack, PVC fitting included.
Cash Acme U3088FLEX18BVLF Braided Flexible Water Heater Connector Plumer's Pack 07013 Thermodisc Contractor Pack Plumer's Pack 07023 Thermostat Contractor
Used in residential and commercial applications to connect the hot and cold supply lines to the water heater. Connects to copper, PEX, and CPVC tubing. Contains:  (2) High Watt Density Elements #02342  4500w 240v  (1) TOD lower thermostat #08122  (1) TOD upper thermostat #08162. Contains:  (2) High Watt Density Elements #02342  4500w 240v  (1) Apcom style lower thermostat w/protector #07722  (1) Apcom style upper thermostat w/protector #07862.
Camco 10183 Water Heater Connector Kit DRAIN PAN TANKLESS W/PVC FITNG Camco 2953 Ultra Low Watt Density Water Heater Element
Contains (2) 3/4" NPT  x 2" dielectric nipples, (2) 3/4" x 15" flexible water connector, (1) roll Teflon tape, (2 )3/4" NPT compression adapters, (1) 1/2" x 24" stainless steel gas connector. Includes 1" and 1-1/2" dual size PVC drain fitting. Injection molded for superior strength. Will not rust or corrode. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2".Protect finished areas from water damage. 4500W 240V screw in element LWD Lime Life Ripple Foldback (Does Not Fit A Duron tank, threads are 1").
Camco 11231 Water Heater Stand Kit Eastman 60023/DET-12 Thermal Expansion Tank Watts LF70A-F Tempering Valve
Stand for gas water heaters from 30 to 50 gallons, constructed of galvanized steel, minimal assembly required, for use with all residential water heaters.  21" x 21" x 18" Used on gas, oil, or electric, direct-fired, residential water heater and hot water storage tank applications to absorb the increased volume of water created by thermal expansion. It also maintains balanced pressure throughout the water supply system by keeping system pressure below the T&P relief valve setting. It is a pre-pressurized, field-adjustable steel tank with an FDA-approved Butyl rubber diaphragm, and brass 3/4 in. (20mm) inlet connection. An expansion membrane prevents air-to-water contact in the tank ensuring a long system life. IAMPO listed and ANSI/NSF 61 certified. Maximum Pressure: 150psi (10 bar). Hydraulically-operated thermostat opens a spring loaded check in the cold water inlet allowing cold water to mix with the hot water. Lead free brass valve body, simple maintenance thermostat assembly, finger-tip dial adjustment cap, stainless steel springs.
DRAIN PAN TANKLESS ALUM W/PVC Watts 1156F Feed Water Pressure Regulator Intermatic WH40 Water Heater Timers
For gas or electric water heaters, aluminum will not rust, corrode, or crack. Fits most tankless water heaters with a maximum depth of 13" and width of 20-1/2". Protect finished areas from water damage. For use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of a bronze body construction with NPT threaded inlet and outlet connections, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Maximum Pressure: 100psi (6.9 bar). Enclosure: NEMA 1 rated indoor steel in gray finish. Spring hasp, with hole for lock, holds permanently attached, side hinged door closed. Three mounting holes on back plus box mounting holes. 7-3/4" H x 5" W x 3" D. Switch rating: 10,000 W (40 amp) Max 250 volt, 60 Hz. Allows user to shift electricity use to "off-peak" time periods to save utility costs.
Camco 08421 Water Heater Valves Camco 08401 Natural Gas Valve Watts 3/4 LF1170M2-UT Temperature Control Valves
4" water column, 1-1/4" shank length, 1/2" NPT gas inlet by 1/2" inverted flare outlet, adjustable 70-160 degrees. Adjustable 70 to 160 degrees F.  42,000 BTU. 4" water column. 1-1/4" shank length. 1/2" NPT gas inlet by 1/2" inverted flare outlet. Specifically designed for mixing hot and cold water on hot water supply systems. Ideal for radiant heat applications. Bronze body construction, solid wax hydraulic principle thermostat, thermostat controls both hot and cold water, integral filter washers and check valves, adjustment cap with locking feature.
Ariston GL Glass Lined Electric Water Heater Ariston GL Glass Lined Electric Water Heater Ecosmart POU 6 Water Heaters
Saves space, energy and water with compact longer-lasting design and by providing instant hot water at the tap. Quick, economical recovery and insulation for high efficiency. Lightweight, compact, plugs into standard 110-Volt outlet and mounts on wall or sits on floor. Easily install by tapping cold water line under sink, or for greater volume install inline with larger hot water source such as tankless water heaters or storage tank heaters. Backlit On/Off switch. ABS housing, injected foam insulation. Magnesium anode rod helps protect tank against corrosion. UL Listed. 6 YEAR LIMITED WARRANTY. 1/2" NPT male inlet/outlet connections and 3/4"NPT temperature/pressure relief valve installed. 14"H x 14"W, 10-1/4"D 2.5-gallon effective for 1 sink, 12-1/4"D 4-gallon for 2 sinks. Includes mounting bracket. 65 to 145 degrees Fahrenheit adjustable operating temperatures. 110/120 Volts, 12.5 amps, 1440 watts, single phase, 150 psi operating pressure. Saves space, energy and water with compact longer-lasting design and by providing instant hot water at the tap. Quick, economical recovery and insulation for high efficiency. Lightweight, compact, plugs into standard 110-Volt outlet and mounts on wall or sits on floor. Easily install by tapping cold water line under sink, or for greater volume install inline with larger hot water source such as tankless water heaters or storage tank heaters. Backlit On/Off switch. ABS housing, injected foam insulation. Magnesium anode rod helps protect tank against corrosion. UL Listed. 6 YEAR LIMITED WARRANTY. 1/2" NPT male inlet/outlet connections and 3/4"NPT temperature/pressure relief valve installed. 14"H x 14"W, 10-1/4"D 2.5-gallon effective for 1 sink, 12-1/4"D 4-gallon for 2 sinks. Includes mounting bracket. 65 to 145 degrees Fahrenheit adjustable operating temperatures. 110/120 Volts, 12.5 amps, 1440 watts, single phase, 150 psi operating pressure. Designed for under the sink point-of-use applications with a maximum flow rate of .5 gpm.  Amperage draw: 29, required breaker: 30, required wire: 10 AWG, connection fitting: 1/2" MPT. Dimensions: 7" x 11" x 3". For single faucet application.
Ecosmart POU 3.5 Water Heaters Ecosmart ECO 11 Water Heaters Ecosmart ECO 8 Water Heaters
Designed for under the sink point-of-use applications with a maximum flow rate of .5 gpm.  Amperage draw: 29, required breaker: 30, required wire: 10 AWG, connection fitting: 1/2" MPT. Dimensions: 7" x 11" x 3". For single faucet application. Configured for climates where incoming water temperature is 67 degrees F and above. Well suited for heating up to 2 gpm. Digital temperature control allows you to set temperature in 1 degree increments. Voltage: 240, single phase, 13.6KW, 57 amps, required breaker: 60DP, required wire 2X6 AWG, 1/2" CF pipe fitting. Dimensions: 12" x 9.75" x 3.75". Configured for climates where incoming water temperature is 67 degrees F and above. Well suited for heating up to 2 gpm. Digital temperature control allows you to set temperature in 1 degree increments. Voltage: 240, single phase, 8KW, 33 amps, required breaker: 40DP, required wire 8 AWG, 1/2" NPT pipe fitting. Dimensions: 12" x 9.75" x 3.75".
Richmond 6EP2-1 Electric Water Heater Richmond 6EP6-1 Electric Water Heater Richmond 6EP10-1 Electric Water Heater
6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements.
Richmond 6EP20-1 Electric Water Heater Richmond 6EP15-1 Electric Water Heater Ecosmart ECO 18 Water Heaters
6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. 6-Year limited warranty on tank and parts. Unique side mounted water connections for easier installation, space saving design for installation in tight spaces, UL approved for use in manufactured housing, ideal for retro-fit replacement of electric water heater, single 2000 watt heating element, rigid foam insulation for superior heat retention, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. Configured for climates where incoming water temperature is 62 degrees F and above. Capable of heating over 2.5 gpm. Digital temperature control allows temperature settings in 1 degree increments. Voltage: 240, single phase, 18 kW, amperage draw: 75 amps, required breaker: 2 x 40 DP, required wire: 2x8 AWG, Pipe fittings: 3/4" NPT, Dimensions 18" x 14" x 3.75".
Ecosmart ECO 27 Water Heaters Richmond 8TV40-2 Double Element Table Top Electric Water Heater Richmond 6GR40PVE2-40 Round and Tall Gas Water Heater
Configured for climates where incoming water temperature can reach as low as 37 degrees. Capable of heating nearly 3 gpm. Digital temperature control allows temperature settings in 1 degree increments. Voltage:240, single phase, 24KW, amperage draw: 100 amps, required breaker: 3x40 DP, required wire: 3x8 SWG, Pipe fittings: 3/4"NPT, dimensions: 18" x 17" x 3.75". 6-year limited warranty on tank and parts. Dual 4500 watt heating elements for faster recovery, patented resistor design heating elements prolong anode rod and tank life, porcelain enamel top is durable and provides added work area in kitchen installations, compact design permits water heater to fit snugly against wall, factory installed temperature and pressure relief valve, includes extra durable high temperature dip tube to meet the most stringent plumbing codes. Meets or exceeds National Appliance Conservation Act (NAECA) requirements. Dia:25",Ht:36" WtrCnHt:33" Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements.
Richmond 6GR50PVE2-42 Round and Tall Gas Water Heater Richmond 6GR40PVE2-36P Tall Gas Water Heater Richmond 6GR50PVE2-42P Tall Gas Water Heater
Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements. Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements. Air/fuel shut-off system offers double protection, Maintenance free ?  no filter to clean. Flammable vapor detection sensor: Protective control system that disables the heater in the presence of flammable vapor accumulation. Flexible Venting Options: Long venting lengths up to 100 feet, PVC, ABS, or CPVC vent pipe options, Vertical or horizontal termination. New Quiet Blower: Less noise than ever before. Self-diagnostic System: Integrated self-diagnostic system control takes away the guesswork. Environmentally Friendly Burner: Low NOx design for low nitrous oxide emissions. High Altitude Compliant: Tall models certified for applications up to 7,700 feet above sea level, Short models certified for applications up to 6,000 feet above sea level. Self-Cleaning: EverKleen patented system fights sediment build-up, Reduces fuel cost, Provides more hot water. Longer Life: Patented magnesium anode rod design incorporates a special resistor that protects the tank from rust, Provides longer tank life than using standard magnesium anode rods. Plus: Temperature and pressure relief valve is included, Standard 110 volt electrical connection,8 Foot power cord included. Exceeds National Appliance Energy Conservation Act (NAECA) requirements.
Rheem / Richmond RMTGH-95DVLN Water Heater Rheem / Richmond RMTGH-95DVLP Water Heater Rheem / Richmond RMTGH-95XLN Water Heater
For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D. For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D.
Rheem / Richmond RMTGH-95XLP Water Heater HEAT PUMP 50GAL 10YR HYBRID   HEAT PUMP 80GAL 10YR HYBRID
For 3 bathroom homes. 11,000-199,9002 BTU max, 9.5 gal/min at 35 deg rise. 94 percent efficient with stainless steel condensing heat exchanger. Digital (UMC-117) remote control and 20 ft of thermostat wire included. 27-4/2"h x 18-1/2" W x 9-3/4" D. Multiple operation modes: energy saver, heat pump only, high demand, electricd heat only, vacation. Premium grade anode rod with resistor extends the life of the tank. 3/4" hot water inlet and outlet, 3/8" condensate drain connections. Incoloy stainless steel resistor elements, top-mount washable air filter, 2-1/2" non-CFC foam insulation, enhanced flow brass drain valve, Temperature an pressure relief valve included. Multiple operation modes: energy saver, heat pump only, high demand, electricd heat only, vacation. Premium grade anode rod with resistor extends the life of the tank. 3/4" hot water inlet and outlet, 3/8" condensate drain connections. Incoloy stainless steel resistor elements, top-mount washable air filter, 2-1/2" non-CFC foam insulation, enhanced flow brass drain valve, Temperature an pressure relief valve included.
   
 
1