Home > PLUMBING > KITCHEN & BATH > SHOWER & BATH REPAIR
Sort By:
1 2 3
Oatey 43561 Snap-In Floor Drain GASKET TUB DRAIN CARTRIDGE    Oatey 42042 Tile Rings
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Rubber. For tip-toe style bathtub stoppers. 2-1/16" x 1" x 1/4". 4-1/4"  x 4-1/4" Stainless steel square tile ring. For use with the 151 Series Oatey drains.
COVER DRAIN CLIP SHOWER3-3/8IN STRAINER TUB SNAP 2IN CHROME  Danco 80001 Tub Spout Ring
Designed to fit 3-3/8" shower drains. Steel construction, 2" diameter. Grid-style. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID.
Oatey 43569 Snap-In Floor Drain Danco 80002 Tub Spout Ring Oatey 43565 Snap-In Floor Drain
Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover. Adds a decorative flair to a basic tub spout. Covers gaps and holes. 3-5/8" OD, 2-1/4" ID. Designed for drainage in areas where waterproofing membrane is not required.  Plastic Snap-In Drain can be solvent welded or inserted into Sch. 40 DWV pipe.  One piece design does not allow for removal of the cover.
Plumb Pak PP826-64 Strainer Dome Cover Plumb Pak PP826-4 Flat Tub Overflow Washer STRAINER SHOWER 3-3/8IN CHROME
Strainer dome cover with screw. Plumb Pak Tub Overflow Washer, Flat, Sponge Steel construction, use with 3-1/8" drains. Screws not included.
PLATE OVERFLOW 1-HOLE CHROME  Plumb Pak Water Saver Economy Showerhead Plumb Pak PP22612 Face Plate Screw
Round design with screw holes 2" center-to-center. Includes adapter to replace one or two hole plates. Screws included. Installs to standard 1/2" shower arms. 2.0 gpm flow rate. Chrome plated face plate screws.
STRAINER TUB 2-15/16 BRSH NIC Plumb Pak Water Saver Economy Showerhead Danco 50673B Volume Control Washer
2-15/16" diameter. Brushed nickel finish. Replaces Gerber no. 91-292. Adjustable Spray. Installs to standard 1/2" shower arm. 2.5 GPM flow rate. For shower heads with standard 1/2" IPS connection. Bagged.
FLANGE SHOWER ARM CHROME      SHOWERHEAD M-HOME/RV CHROME   DIVERTER TUB SPOUT REPAIR KIT
FLANGE SHOWER ARM CHROME
Our Price : $4.99
Metal construction. Fits 1/2" IPS connection. Set screw style. Constructed of durable plastic. 1/2" IPS connection. 2.5 GPM. Includes lift knob, repairs diverters in most tub spouts. Complete kit.
FLANGE ARM SHOWER W/SCREW     Mintcraft B1140WH Shower Arms VALVE SHOWER CONTROL CHROME
FLANGE ARM SHOWER W/SCREW
Our Price : $5.39
Sized to slip over shower arm and has an adjustable set screw for a secure fit. Polished chrome finish. Standard 1/2", Plastic. Overall length 7". Brass construction, fits standard 1/2? IPS connection, small trickle of water reminds user to shut water off at shower handle when done. For use between shower arm and head.
Plumb Pak PP825-50 Shower Drain Grid BASKET SHOWER HAIR CATCHER    SHOWERHEAD 1 FUNCTION
SHOWERHEAD 1 FUNCTION
Our Price : $5.99
3-5/16" O.D. 6.88" h x 4-3/4" w. Durable plastic construction. Designed to fit the Danco hair catcher for shower drains (Model #?s: 10533, 10529). Stops hair and other particles from going down the drain Ruber spray holes, 2.0 gpm flow rate.
HOSE SHOWER REPLMNT WHITE 60IN Plumb Pak PP606-23 Clevis Plunger Linkage Assembly B & K 133-106 Shower Drain
For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger. For use on steel, fiberglass and other types of plastic shower bases. Solvent welds to 2" DWV or Schedule 40, ABS or PVC pipe. 4-1/2" flange diameter, with stainless steel grid.
World Wide Sourcing 24500 Bathtub Spouts World Wide Sourcing 24354 Bath Drain Trip Levers Oatey 42787 Shower Drain
Zinc body; chrome plated finish with reducer bushing. For 3/4'' or 1/2'' pipe. Zinc body. Screws included. 2" PVC offset shower drain with receptor base. Solvent welds over 2" schedule 40 DWV pipe. Universal 4-1/4" Snap-Tite strainer. Drain body provides 1-1/2" offset to work around joists and imperfect slab penetrations. Drain body is sealed to shower base with rubber gasket and fiber slip washer.
Mintcraft B1140CP Shower Arms Oatey 42097 101 PS Shower Drain World Wide Sourcing PMB-020 Shower Adapters
Standard 1/2", Plastic. Overall length 7". Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Shower flow adjuster. 1/2" IPS.
Plumb Pak PP825-7 Shower Arm Diverter Oatey 42086 101 PS Shower Drain Danco 80991 Round Bath Drain Overflow Plate With Lever
Shower arm diverter, plated plastic, connects personal shower and shower head. 1/2" F.I.P. x 1/2" M.I.P. x 1/2" M.I.P Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Includes screws. 2" center to center holes. Carded.
SHOWERHEAD ADJUSTBLE SPRAY WHT TUB STOP TOE TOUCH CHROME     DRAIN STOPPER RAPIDFIT CHROME
Max 2.0 GPM at 80 PSI. Plastic. Plastic construction. Touch-toe design pushed to open and close. 2? diameter. Grid style to keep drain free from debris. Includes 3/8?and 5/16 screw studs. Plastic. Touch-toe design,
CUP MOUNT-SUCTION             Oatey 101 PNC Shower Drain Plumb Pak PP825-8 Shower Adapter Control
CUP MOUNT-SUCTION
Our Price : $6.99
Suction cup wall mount for hand-held showers. Easy to install and extra convenient.Tested to assure quality performance. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced. Plated plastic. Flow control and shut off.
Plumb Pak PP863-50 Replacement Tip Toe Cartridge Whedon TV1C Shower Flow Controller Plumb Pak PP826-10 1-Hole Trip lever Style Tub Face Plate
Threaded shaft. Installs easily between standard shower arm and head.  Push button control easily adjusts spray force from full to a trickle, great for saving while lathering, shampooing, etc. Made in USA Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Chrome Plated
Oatey Snap-Tite Round Drain Strainer TUB SPOUT FRONT CONNECT CHROME BRACKET SHOWER RPLCMT H/H WHT
4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Universal design that is compatible with most faucet brands. It features a metal construction that provides strength and durability. Fits 1/2? or 3/4? IPS connections. No diverter. Attaches to standard 1/2" IPS connection (standard shower arm) and allows hand held shower to be used as either wall mount or hand held.
Plumb Pak PP826-11 2-Hole Trip Lever Style Tub Face Plate Plumb Pak PP826-21 Tip Toe Replacement Cartridge Oatey 101 PNC Shower Drain
Plumb Pak Tub Face Plate, 2-Hole, Blank Overflow, Suitable For Use With: Bath Drain, Chrome Plated Threaded shaft. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced.
Plumb Pak PP22601 2-Hole Trip Lever Style Tub Face Plate Plumb Pak PP825-51 Shower Drain Water Pik ICA-111HE Watersaver Showerheads
Trip lever for drain control. Includes screws. Fits 2" outlet. Fully adjustable spray, 1.5 gpm average flow.
Oatey Snap-Tite Square Drain Strainer Oatey Snap-Tite Round Drain Strainer SHOWERHEAD MH/RV PREM CHROME
4-1/4" x 4-1/2" square snap-in strainer. For use with the Oatey 130 Series drains. Carded. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. The adjustable head allows for a personalized shower experience. It is designed to fit 1/2" IPS connection and is easy to install for your indoor or outdoor showers. The chrome finish provides a clean appearance and it is constructed of a durable plastic.
SHOWER ARM W/FLANGE 6 CHROME  Plumb Pak PP828-62 Shower Arm Mount World Wide Sourcing 24501-3L3L Bathtub Spout
Stainless steel construction. 6" shower arm fit 1/2" pipe thread. Shower arm mount. Zinc swivel ball. Tapped with 3/4" IPS with internal 3/4" x 1/2" face bushing.  Chrome plated zinc body.
Plumb Pak PP22510 Shower Arm With Flange Plumb Pak PP826-1 2-Hole Trip Lever Style Tub Face Plate Plumb Pak PP825-10 Shower Arm With Flange
1/2" IPS. Trip lever for drain control. Includes screws. 1/2" IPS.
Danco Versaspray Handheld Showerhead Danco 37680B Bath Drain Gasket EcoFlow ETC-411T Shower Head
Handheld shower for tub spouts, easy installation with no tools required, 42" vinyl hose. Ideal for cleaning tub, bathing children and washing pets. Rubber washer for Toe Touch drain assembly. 4 spray settings: full body spray, massage, full body/massage, water saving trickle. Water Sense certified. 2.0 gpm.
Whedon EP14C Showerhead World Wide Sourcing 26629 Bathtub Spout Danco 50677B Volume Control Washer
2.0 GPM max. White shower with chrome plated brass connector & ball. 4 spray settings: wide spray, fast pulsating jets, spray and pulse, and pause (trickle). 1-3/4" adjustable telescoping fit. Slide connect allows for fast installation for 1/2" copper stub.  Chrome plated zinc body. For shower heads and arms. Bagged.
DRAIN ASSEM TUB PFISTER CHRM  SHOWER ARM MOUNT CHROME       VALVE SHOWER DIVERTER
SHOWER ARM MOUNT CHROME
Our Price : $9.99
VALVE SHOWER DIVERTER
Our Price : $9.99
Brass construction, 16 TPI. Comes with strainer and bath shoe. Mounts hand shower to shower arm. Designed exclusively for Delta Faucets Attaches between existing shower arm and head to connect a handheld shower. Switches between wall mounted and handheld shower using side dial. Polished chrome finish.
BRACKET SHOWER RPLCMT H/H BN  Mintcraft B42014 Personal Shower Hoses Oatey 130 42210 Shower Drain
Attaches to standard 1/2" IPS connection (standard shower arm) and allows hand held shower to be used as either wall mount or hand held. 72" PVC hose with metal hex nuts. Includes 2 pc washers and pipe tape. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes.
Mintcraft B1105WH Shower Arm Brackets Oatey 101 PNC Shower Drain Plumb Pak Energy Saver Showerhead With Swivel
ABS construction. Metal ball joint. Designed for use with preformed shower stall bases.  The drain body is sealed to the shower base with a fiber and rubber washer.  2" Schedule 40 DWV pipe is secured with a mechanically compressed gasket that does not require caulking.  Drain top accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Compression gasket tightens around 2" Sch. 40 DWV pipe with caulking nut & wrench. Can be used with 1-1/2" Sch. 40 DWV pipe and 1-1/2" or 2" Copper DWV pipe when caulking gasket is replaced. 2.0 GPM flow rate.
Oatey 42202 Shower Drains SHOWERHEAD FIXMOUNT 3-SET WHT SHOWER ARM W/FLANGE 8IN CHROME
Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Max 2.0 GPM at 80 PSI, rubber spray jets Brass construction. 8" shower arm designed to fit standard 1/2" pipe thread.
LINKAGE TUB DRAIN ASSEMBLY    DRAIN STOP LIFT/TURN CHROME   BATH SHOE UNIVERSAL CHROME
Use with trip-lever assemblies. Restores open-close feature to drain assembly. Includes plunger assembly: yoke and nut. Heavy-duty brass stopper and shaft. Two thread sizes: 5/16" one end and 3/8" on the other. Replaces foot operated stoppers made by Rapid fit 1200 series, Sterling, Casper's and Duracraft. 16 threads per inch. Strainer NOT included.
OVERFLOW PLATE DRAIN BRSH NIC HOSE SHOWER REPLACEMENT 60IN  Whedon Products USB3C Ultra Savershower
Steel construction, single-hole style, round body. Includes screw and adapter to fit either 1 or 2-hole applications. Small, water saving shower with pressure compensating technology that provides consistent 1.5 GPM flow rate from 30 to 80 psi.  Shower is a conical spray pattern of perfectly sized droplets for a forceful, invigorating and very wet feeling shower spray.  Available with or without push button trickle valve.  Saves over 20 percent more than other water saving showers, complies with all Water Sense guidelines for water and energy conservation.  Made in the USA of solid brass and chrome plated, Installs easily with standard 1/2" female threads.
Oatey 42213 Shower Drain Plumb Pak Water Saver Economy Showerhead Mintcraft B1105CP Shower Arm Brackets
Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. Adjustable Spray. Installs to standard 1/2" shower arm. 2.5 GPM flow rate. ABS construction. Metal ball joint.
Plumb Pak PP825-30 Bathtub Spout With Reducer Bushing VALVE CONTROL SHOWER CHROME   TUB SPOUT W/DIVERTER CHROME
Connects to 3/4" or 1/2" IPS pipe. Brass construction, For use between shower arm and head. 1/2" FIP x 1/2" MIP. Small trickle of water reminds user to shut water off at valve. Universal design is compatible with most faucet brands. Features a metal construction that provides strength and durability. Fits 1/2? or 3/4? IPS connections.
STOPPER BTHTB DRN TCH-TOE BNKL MOUNT SHOWER ARM              DIVERTER/MOUNT PLST CHM-PLTD
MOUNT SHOWER ARM
Our Price : $11.99
Plastic construction, Includes 3/8" screw stud and 5/16 screw stud. For hand-held showers. Mounts to shower arm for convenience. Adjustable direction. Three-way diverter for wall shower, handheld shower, or both. Attaches to standard 1/2" IPS shower connections. Includes built-in mount for handheld shower. Chrome plated plastic finish.
Danco 10533 Drain Stopper Plumb Pak PP825-11 Shower Arm With Flange Plumb Pak Energy Saver Shut-Off Showerhead With Swivel
Prevents clogged shower drains by catching hair and debris before they go down the drain. Removable basket for easy cleaning. Universal fit, fits any standard 4" shower drain. Easy installation. 1/2" IPS. 2.0 GPM flow rate.
SHOWER HOSE STRETCH 60-82 CHRM SHOWERHEAD 3 FUNCTION         HOSE VACUUM BREAKER 60IN
SHOWERHEAD 3 FUNCTION
Our Price : $12.99
HOSE VACUUM BREAKER 60IN
Our Price : $12.99
Stretchable 60-82". Chrome finish Metal ball connexctor, standard 1/2" pipe fitting, easy-turn dial, 2.0 mas flow rate, Replacement white shower hose fits most hand-held showers. Includes built in vacuum breaker.
HOSE SHOWER STNLS STL 72IN    Plumb Pak PP826-22 Waste Shoe Washer Plumb Pak PP606-22 Clevis Plunger Linkage Assembly
HOSE SHOWER STNLS STL 72IN
Our Price : $12.99
Extra long reach with a durable stainless steel construction. Coordinates with stainless steel or polished chrome fixtures. Washer for 1-1/2" bath waste strainer. For trip lever 6" eye wire. 10-32 brass eye bolt. Brass clevis plunger.
Oatey 130 42238 Shower Drain Screw-Tite 42018 Round Strainer TUB SPOUT 5IN FRONT DIVERTER
Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Fits 1/2" IPS threaded connection. Measures 3-3/4" to threads of front connection for a 1/2" pipe. 5" tub spout, metal construction. Chrome finish.
SHOWER HAND 1 FUNCTION        HOSE UF VACUUM BREAKER 60IN   Plumb Pak PP825-60 All Purpose Bath Spray Clip On Connector
SHOWER HAND 1 FUNCTION
Our Price : $13.99
Rubber spray holes, 2.0 gpm flow rate. WaterSense certified. Shower arm mount for hands-free showering. Shower hose with a built in vacuum breaker, fits most hand-held showers. Hose not tapered. Plastic coating. Chrome finish All purpose spray attachment adapts to most sink spouts. Rubber, slip on connector. Bagged.
Plumb Pak PP825-10BN Shower Arm With Flange Danco 10529 Shower Drain Mintcraft B1101CP Personal Shower Hoses
1/2" IPS. Prevents clogged shower drains by catching hair and debris before they go down the drain. Removable basket for easy cleaning. Universal fit, fits any standard 4" shower drain. Easy installation. 72" mylar hose with metal hex nuts. Includes 2 pc washers and pipe tape.
Plumb Pak PP825-30BN Bathtub Spout With Reducer Bushing Oatey Snap-Tite Round Drain Strainer Plumb Pak PP826-10BN 1-Hole Trip lever Style Tub Face Plate
Connects to 3/4" or 1/2" IPS pipe. 4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. Plumb Pak Tub Face Plate, 1-Hole, Trip lever Style, Suitable For Use With: Bath Drain, Brushed Nickel
SHOWERHEAD 5-SPRAY CHROME     SHOWERHEAD WALLMOUNT CHROME   TRIM TUB DRAIN TOUCHTOE CHROME
2.0 GPM. The five spray massage shower head offers all the benefits of a standard shower head with the extra benefits of saving money on water and energy. 3-1/2" round shower head. 3 modes: full body coverage, concentrated center spray/massage, full body/massage combination, Features spray control ring, easy clean nozzles, removable flow regulator. Brass construction, chrome finish. Replaces 1-hole or 2-hole overflow plates. Designed to fit 1-1/2 and 1-7/8" drain shoe sizes. Kit includes overflow plate, bath drain strainer, washer and bushing.
Plumb Pak PP826-20 Replacement Drain Foot Lock Assembly Plumb Pak PP825-37 Bathtub Spout With Diverter EcoFlow ETC-413T Shower Head
Push button type with 5/16" thread shaft complete with cartridge and strainer. Adjustable for various nipple lengths. 3/4" I.P.S. with 3/4" x 1/2" face bushing. 4 spray settings: full body spray, massage, full body/massage, water saving trickle. Water Sense certified. 2.0 gpm.
Mintcraft A558215NP-OBB1 Shower Arms Whedon USB4C Ultra Savershower Showerhead Plumb Pak Cover Up Extra Large Tub Stop
6" shower arm. Stainless steel construction. Small, water saving shower with pressure compensating technology that provides consistent 1.5 GPM flow rate from 30 to 80 psi.  Shower is a conical spray pattern of perfectly sized droplets for a forceful, invigorating and very wet feeling shower spray.  Available with or without push button trickle valve.  Saves over 20 percent more than other water saving showers, complies with all Water Sense guidelines for water and energy conservation.  Made in the USA of solid brass and chrome plated, Installs easily with standard 1/2" female threads. Eliminates the need to remove the drain strainer or replace the entire drain in order to change and enhance the look of the bath tub drain. Includes extra large, Quick "Cover Up" stopper. Fits most tub drain style except trip lever. Reversible threaded adapter fits common 5/16" and 3/8" drain thread patterns.
OVERFLOW PLATE LEVER BRSH NIC SHOWER HAND 3 FUNCTION        SHOWER HEAD ADJUSTABLE SPRAY
SHOWER HAND 3 FUNCTION
Our Price : $15.99
Metal construction, round design with screw holes 2" center-to-center. Trip lever. Includes screws. 2.0 gpm flow rate. easy-turn spray dial, shower arm mount for hands-free showering. tangle-free flexible hose. Wall-mounted shower head is fully adjustable with a maximum output of 1.8 gpm. Side-dial makes it easy to change spray output. Chrome-plated brass housing.
Snap-Tite 129 Bathtub Strainer Mintcraft A558215CP Shower Arms Plumb Pak PP22620PC Drain Foot Lock Assembly
4-1/4". For 101 PNC and 140 NC No-Calk snap-in shower drains, and 101 PS solvent weld and 2-part shower drains.Carded. 6" shower arm. Stainless steel construction. Push button type with 5/16" thread shaft complete with cartridge and strainer.
Oatey 42078 101 PS Shower Drain Plumb Pak PP825-38 Slide Connect Bathtub Spout With Reducer Bushing Delta 1076160PK Diverter Tub Spout
Designed for use with preformed shower stall bases.  The drain seals to the base with fiber and rubber washers.  2" Schedule 40 DWV pipe solvent welds to the drain base.  Drain top accommodates 4-1/4" universal Snap-Tite Strainers available in a variety of designer finishes. Drain body is sealed to shower base with rubber gasket and fiber slip washer. Zinc die cast front diverter spout. Spout tube connects to 1/2" copper at wall end of spout. Bathtub shower diverter spout with 1/2" female pipe thread inlet for long pipe nipple. 4-1/8" max nipple length. Carded.
Whedon AF205C Bungy Metal Stretch Shower Hose Danco 88702 Bathtub Spout Without Diverter SHOWERHEAD 4SET WHITE 2GPM
Stretchable metal shower hose, made with a flexible stainless steel double interlock outer shell and stretchable EPDM inner hose. Works with all standard hand shower systems, standard 1/2" female chrome-plated brass connectors on each end, conical nut with o-ring gripper fits all standard hand shower brackets. Brass barbs. Universal tub spout fits all sizes, easy installation. Includes:  zinc die-cast chrome-plated tub spout, adapters, allen wrench, and plumber's tape. Installs on  all existing connections: 1/2" copper slip fit, 1/2" thread, 1/2" thread in nose, and 3/4" thread. Carded. Four personalized shower settings: Pulse - steady pulsating spray. Turbo Pulse - powerful hyper massage. Spray Pulse - pulsating massage. Outside Spray - soft, body spray.  60 spray channels.  Up to 2800 pulses per minute at 80 PSI.
TUB SPOUT 1/2SLIP W/DIVRT CHRM SHOWERHEAD 5 FUNCTION         HOSE METAL EXTENDIBLE HYDY
SHOWERHEAD 5 FUNCTION
Our Price : $16.99
HOSE METAL EXTENDIBLE HYDY
Our Price : $16.99
1/2" slip connection. Rear connection, metal construction. Includes set screw. Chrome finish. Spray settings include: full body, full spray with massage, massaging, aerated, pause. 2.0 gpm flow rate, soft rubber spray holes. 11.75" length.
Mintcraft B42034 Personal Shower Hoses Oatey 130 42203 Shower Drain Plumb Pak PP7088RB Tubular Waste Shoe
72" PVC hose with metal hex nuts. Includes 2 pc washers and pipe tape. Designed for use with tile or marble showers shere a shower pan liner is used.  The low-profile design allows for installation in tight spaces.  Drain body solvent welds over 2" or inside 3" Sch. 40 DWV pipe.  Reversible clamping collar is secured with 4 stainless steel bolts into brass inserts.  2" IPS threaded strainer barrel is adjustable to allow for easy height adjustment.  Weep holes in the drain assembly allow drainage from the pan liner.  Round drain barrel accommodates 4-1/4" Universal Snap-Tite strainers available in a variety of designer finishes. For waste and overflow. Fine thread.
Plumb Pak PP825-31 Bathtub Spout With Diverter Plumb Pak Water Saver Showerhead Plumb Pak PP825-36 Bathtub Spout With Front End Diverter
Spout for in-the-wall showers. Lift lever diverts water to shower. Returns water flow to tub when water is turned off. Connects to 3/4" IPS at wall end with reducer bushing for IPS pipe. Lever handle adjustment. Brass ball. Installs to standard 1/2" shower arms. 2.5 GPM flow rate. Front end mount for nipples extending 4-1/2"-5" from wall. Connects to 3/4" or 1/2" IPS pipe.
   
 
1 2 3