Home > PAINT & SUNDRIES > SUNDRIES > CONSTRUCTION ADHESIVES
Sort By:
1
Loctite PL 200 Projects Construction Adhesive Liquid Nails LN-704 Liquid Nails Construction Adhesive ITW Devcon 18045 Contact Cement
For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft. This premium latex-based formula offers water clean-up when wet, develops strength rapidly, and has excellent water resistance and long-term holder power when set. GREENGUARD Gold Certified. Make a tough, permanent bond on contact. Instantly bonds metal, wood, ceramic, leather, rubber and many other surfaces. Bonds similar and dissimilar materials as soon as the two surfaces are joined. 700 psi bond strength. Dries amber, sets in 5 minutes.
Titebond PROvantage Proprietary Synthetic Polymer Subfloor Adhesive Franklin Titebond GREENchoice Construction Adhesive Red Devil 0497 Ceramic Tile Adhesive
High-performance. For subfloor installations and general plywood use. Offers a strong initial tack and excellent bond strength for particleboard, OSB, engineered lumber and wet, frozen and treated lumber. Provides a permanent bond that remains flexible, reduces nailing and eliminates squeaky floors. Can be easily extruded from 0 degree fahrenheit - 100 degree fahrenheit for applications in various climates. 10oz. Coverage: 123 feet using 1/8" bead, 30 feet using 1/4" bead, 13 feet using 3/8" bead. 28oz. Coverage: 343 feet using 1/8" bead, 86 feet using 1/4" bead, and 38 feet using 3/8" bead. Working time approximately 20 minute on 1/4" bead. Exceeds the requirements of APA's AFG-01 ASTM D3498 and ASTM C557. For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557. Perfect for installing and repairing mosaic, plastic and ceramic tile, and linoleum. Water clean-up.
ADHESIVE SUBFLOOR 4000 10.3 OZ ADHESIVE FOAMBOARD 10.3 OZ    ADHESIVE CONSTUCTION VOC10.3OZ
Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adhesive delivers a high strength weatherproof bond on wet, frozen and treated lumber, and is easy to gun in cold temperature. Adheres to concrete, dimensional lumber, masonry, metal, OSB and enhanced OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D 3498 and APA AFG-01. PFS Certified. Premium grade adhesive specifically formulated for insulation foam paneling installation. Provides adhesion to foam panels and a variety of construction materials. An instant grab adhesive that provides a strong permanent bond and will not etch or burn through foam panels. Meets or exceeds ASTM C557. Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557.
ADHESIVE SUBFLOOR 10.3 OZ     Liquid Nails LN-206 Wood Projects Repair Adhesive Loctite 1589155 Power Grab Construction Adhesive
Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adheres to concrete, dimensional lumber, masonry, metal, OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D3498 and APA AFG-01. Designed for furniture, woodworking, carpentry and repairs. No drip formula, fast drying, sandable, stainable, and paintable. Easy water clean up. Works best on wood, furniture and cardboard. Eliminates the need for nails and screws in DIY and repair jobs. Premium quality. High strength. Gap-filling. Low odor. Soap and water clean up.
Loctite PL 520 Mirror?Adhesive Red Devil 0498 House And Home Restore Tile Adhesive Liquid Nails LN-990 Liquid Nails Construction Adhesive
Formulated for mounting mirrors. Can be used on all types of structurally sound surfaces, such as wood, drywall, metal and painted surfaces. Remains flexible, and will not be become brittle over time. Provides a safe, strong and permanent bond to most types of mirrors. For installing or replacing loose tile or linoleum. Provides a permanent bond between tile and surface. Equipped with winder to enable evacuation of more caulk from squeeze tube. Water-resistant. Mildew resistant at full cure. ITEMS SHIPPED INTO CANADA WILL BE SHIPPED WITH CANADIAN COMPLIANT PACKAGING. A premium construction adhesive offering a strong, instant hold. Maintains flexibility even in low temperatures. GREENGUARD Gold Certified.
GREENchoice 4122 Weatherproof Subfloor Adhesive Henkel 1911051 Greenseries Construction Adhesive ADHESIVE CONST HVY-DUTY 10OZ
Designed for subfloor installations and plywood use. Reduces the amount of nailing and helps eliminate squeaky floors.  Fills gaps and irregularities between materials. Not designed for continuous submersion. 100-percent solvent-free and contains no ozone-depleting chemicals. Nonflammable formula with no offensive odor offers freeze/thaw stability and cleans up with water before setting. 10 to 120-degrees fahrenheit service temperature. Covers 355 ft. with 1/8" bead. 89 ft. with 1/4" bead and 39 ft. with 3/8"bead. Passes the requirements of APS's AFG-01 specifications and ASTM C557. Used for glued floor projects and deck constructions. Works well for general needs such as paneling, wood or pre-decorated foam panels, trim molding, and various wall tiles. Helps reduce squeaks and sound transmission. Fast set, fast cure, high bond strength, water and weather resistant, and easy cleanup. Meets AFG-01, ASTM D 3498, GREENGUARD certified, LEED requirements. Bonds in temperatures from 22-degrees to 120-degrees F for all season performance. Use on a wide range of construction materials, including plywood, waferboard, cementboard, particleboard, treated lumber and more. Housed in a durable plastic tube for outdoor storage. VOC compliant everywhere. Certified by UL Environment to meet the GREENGUARD Gold Standard as a low emitting material.
ADHESIVE ADV SUBFLOOR 10.3 OZ Loctite 1589346 Power Grab Construction Adhesive Titebond PROvantage Proprietary Synthetic Polymer Subfloor Adhesive
Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adhesive delivers a high strength weatherproof bond on wet, frozen and treated lumber, and is easy to gun in cold temperature. Adheres to concrete, dimensional lumber, masonry, metal, OSB and enhanced OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D 3498 and APA AFG-01. PFS Certified. For small projects and repairs. Premium quality, high strength, gap-filling. Minimizes nailing requirements. Water-based. Low odor. Bonds to wood, plywood, drywall, stainless steel, glass, or cork. Covers 9.2 ft. to 20.7 ft. per tube. Coverage depends on the size of the bead. High-performance. For subfloor installations and general plywood use. Offers a strong initial tack and excellent bond strength for particleboard, OSB, engineered lumber and wet, frozen and treated lumber. Provides a permanent bond that remains flexible, reduces nailing and eliminates squeaky floors. Can be easily extruded from 0 degree fahrenheit - 100 degree fahrenheit for applications in various climates. 10oz. Coverage: 123 feet using 1/8" bead, 30 feet using 1/4" bead, 13 feet using 3/8" bead. 28oz. Coverage: 343 feet using 1/8" bead, 86 feet using 1/4" bead, and 38 feet using 3/8" bead. Working time approximately 20 minute on 1/4" bead. Exceeds the requirements of APA's AFG-01 ASTM D3498 and ASTM C557.
Franklin Titebond Construction Adhesive Titebond PROvantage Proprietary Synthetic Polymer Construction Adhesive Franklin 7272 Titebond Drywall Adhesive
Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications. For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead. Specifically designed for installing drywall and paneling to most common building materials. Offers adhesion to plaster, drywall, Gypsum wallboard, non-vinyl wallpaper, plywood, hardboard paneling, tileboard, and wood. No sag installation and reduces nail pops. 100-percent solvent-free formula, nonflammable, has no offensive odor and cleans up with water before setting. Not intended for exterior applications or for use with metal studs. VOC compliant, contains no ozone-depleting chemicals. Exceeds performance requirements of ASTM C557 specifications. Covers approximately 355 ft. using 1/8" bead 89 ft, using 1/4" bead, and 39 ft. using 3/8" bead.
ADHESIVE TUB SURROUND 10.3OZ  Liquid Nails LN-201 All Purpose Home Projects Repair Adhesive Loctite 1589157 Power Grab Construction Adhesive
Premium grade, high-strength adhesive specifically formulated to hold tub surround panels in place. Bonds all types of tub surrounds such as abs, acrylic, fiberglass, polystyrene, and PVC. Dries clear for an ideal finish. Instant-grab adhesive that is moisture, steam, water, and heat resistant once fully cured. Goes on white, dries clear. Creates a strong permanent bond with flexibility to withstand shock and wear. Waterproof, low odor, flex spread applicator tip. Works best on wood, foam, rubber, and paper. GREENGUARD Gold Certified. Eliminates the need for nails and screws in DIY and repair jobs. Ideal for bonding of wood decking to joists, fencing and siding. Premium quality. High strength. Gap-filling. Low odor. Weather resistant. Paintable. Soap and water clean up. Dries white.
Henkel 1498717 Greenseries Drywall/Panel Adhesive ADHESIVE CONST HVY DUTY 10OZ  ADHESIVE CONST HVY DTY 5OZ
Drywall & Panel Construction adhesive is best suited for bonding drywall to wood. Works well on foamboard, decorative panels, furring strips, concrete walls or drywall. Non-flammable, environmentally friendly, ultra low VOC, fast set, fast cure. GREENGUARD approved.  Meets LEED requirements. Not recommended for use on mirrors or underwater applications. Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557. Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557.
Liquid Nails LN-950 Liquid Nails - Poly Construction Adhesive Dap 00102 Weldwood Contact Cement ADHESIVE CONSTRUCTION 2-1/2OZ
A weather-resistant adhesive specially formulated to adhere to non-porous surfaces such as glass, ceramic, glass and vinyl. Forms instant, high strength bonds on a variety of surfaces. Use in the home, office or workshop. Form strong bonds on contact to eliminate the need for clamps, temporary fasteners and long set times. For bonding plastic laminate for counters and tabletops, rubber, wood and plastic veneers, cork, metal, wood, leather and other porous and nonporous materials. Neoprene rubber. Resists the effects of heat, water, weather, grease, oil and household chemicals. Spreads easily, dries tack free quickly and offers a 2 hour open time. Ideal for small projects on all surfaces. Holds in 30 seconds, and bonds virtually anything including tub & tile, mirrors, flag brackets, wood, floating shelves, laminate repairs, brick and stone, water feature and more. Paintable. All weather. Gap-filling, durable, 100-percent waterproof formula.
ADHESIVE WOOD/PANEL 10.3 OZ   Loctite PL 500 Landscape Block Adhesive Liquid Nails LN-930 Mirror Adhesive
Premium grade, high strength adhesive. Specifically formulated for decorative panel and modeling installation. An instant grab adhesive that delivers a precise vertical hold on wood, foam, and PVC trim ideal for decorative interior projects. Easy to gun in cold temp. Designed for quick and easy application of the final course of cap with landscape blocks and the installation of cement pavers. Secures block walls and capstones. Adheres to brick, stone, timbers, concrete, metal, slate and wood. -20 to 140-degrees fahrenheit service temperature. 20-minute work time. Cleanup with mineral spirits. Covers 32 lin. ft. with 1/4" bead. Synthetic rubber resin. Withstands environmental extremes installation. Meets SFBC 2309.2(A) 23-b, section 3402.2(C) (16). This flexible, permanently bonding construction adhesive will not damage reflective backing. Heat and steam resistant. Synthetic rubber/resin formula. Covers 30 lineal ft. using 1/4" bead for 10 fl. oz.
Franklin 5342 Provantage Drywall Adhesive ADHESIVE SUBFLOOR 28 OZ       Dap 00107 Weldwood Contact Cement
A high-performance, formula specifically designed for installing drywall and paneling to most common building materials, including wood and metal. It offers excellent adhesion, reduces nail pops and provides a no-sag installation. Fills gaps in substrates, providing a more solid backup surface and reducing sound transmission. It is unaffected by moisture and resists aging, it will not become hard or brittle with age. Covers 343 feet using 1/8" bead, 86 feet using 1/4" bead, and 38 feet using 3/8" bead. Working time approximately 20 minute a 1/4' bead. Exceeds the requirements of ASTM C557 and has been tested in accordance with E72 for racking and shearing. Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adheres to concrete, dimensional lumber, masonry, metal, OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D3498 and APA AFG-01. Forms instant, high strength bonds on a variety of surfaces. Use in the home, office or workshop. Form strong bonds on contact to eliminate the need for clamps, temporary fasteners and long set times. For bonding plastic laminate for counters and tabletops, rubber, wood and plastic veneers, cork, metal, wood, leather and other porous and nonporous materials. Neoprene rubber. Resists the effects of heat, water, weather, grease, oil and household chemicals. Spreads easily, dries tack free quickly and offers a 2 hour open time.
Eclectic E6000 Craft Adhesive WW Henry FP0RSET034 Readyset Mastic Adhesive ADHESIVE MIRROR/MARBLE 10OZ
Provides adhesion strength and versatility. Use to adhere metals, glass, rubber and plastics. Universal vehicle maintenance and repair solution. Can be used as a potting material in electrical and computer applications. Paintable. Waterproof. Flexible. Non-flammable. For the installing porcelain, quarry, stone, ceramic and mosaic tile over interior walls, floors, and countertops. Helps prevent tiles from slipping after placement. Can also be used to install tiles up to 12" x 12". Excellent grab. Covers 50 sq. ft. per gallon with a 5/32" v-notch trowel. Premium grade hybrid adhesive specifically formulated for mirror and countertop installation. Provides a permanent vertical hold in one hour ideal for mirror installation. Easy to gun and will not stain or damage mirrors, countertops or finished surfaces. High strength adhesive that delivers adhesion on porous/non-porous construction materials. Meets or exceed ASTM C557.
ADHESIVE HEAVY DUTY MAX 10OZ  Henry 430 ClearPro Thin Spread Floor Tile Adhesive ADHESIVE CONST MULTI SURF 5OZ
Premium hybrid adhesive delivers up to 5 times faster bond strength. For heavier applications where bond strength and speed are critical. Easy to gun moisture curing adhesive can be applied in a wide range of temperatures for heavier interior or exterior jobs. Offers adhesion to porous & non-porous building materials such as, wet surfaces, PVC, glass, marble, and metal. Meets or exceeds ASTM C557 and ASTM D3498. Use to install vinyl composition tile (VCT) and asphalt tile. Bonds to concrete, wood and wood underlayments, existing well-bonded resilient flooring, terrazzo, marble and radiant-heated subfloors where the surface temperature does not exceed 85 degrees fahrenheit (29-degrees Celsius). 24-Hour working time. Dries clear. Can be used over "Cutback" adhesive residue. Moisture and alkali-resistant. Excellent trowelability. AGIS Guarantee. Covers 350-400 sq. ft. per gallon applied to 1/8" tile. Formulated for use as a fast-setting, high-performance adhesive that bonds almost everything. Cures by absorbing moisture from the surfaces to which it has been applied and by absorbing moisture from the air. Cures rapidly to an initial set within 4 to 6 hours. Has resistance to heat, cold, and weathering. Meets all air quality regulations.
Titebond PROvantage Proprietary Synthetic Polymer Construction Adhesive Leech X30-74 X30 Contact Cement ADHESIVE CONSTRUCTION POWR 9OZ
For more demanding construction and repair projects. For bonding most common materials including wood, metal, brick, marble, ceramic tile, concrete, drywall and wet, frozen and treated lumber. Fills gaps between materials, reduces the amount of nailing and can be extruded down to 0-degrees F. Meets most State and Federal VOC regulatory requirements. Covers approximately 13-123 ft per 10 oz cartridge. Coverage depends on the diameter of the bead. High strength adhesive for professional builders and DIYers. Use to bond formica, plastics, metal, foam rubber, leather, tile, and fabrics. For installing indoor/outdoor carpeting on porches, patios and etc. Exceeds CPSC safety standards. Fast drying, 20-30 minutes. Open time, up to 5 hours. Covers up to 200 sq. ft. per gallon. Not affected by oil or gasoline. Works in all conditions, all weather and on all materials. It can be applied in wet conditions as well as bond two non-porous surfaces. Can also be applied in a wide temperature range, from 40 to 140-degrees F. It is repositionable for 10 minutes and is GREENGUARD certified.
ADHESIVE CONST ALL SURFACE 9OZ ADHESIVE CONST ALLPURP VOC28OZ ADHESIVE DRYWALL 28 OZ
Formulated with a proprietary hybrid-polymer blend. Instant grab. Bonds in any weather condition, wet or dry surfaces. Certified by UL Environment to meet the GREENGUARD GOLD standard as a low emitting material. Use on all surfaces, porous or non-porous, wet or dry except on polyethylene and polypropylene. Comes with a detachable nozzle for easy cleaning for reuse. Using full round 1/4? bead, 9 oz covers 27 linear feet. Premium grade adhesive ideal for paneling, interior remodeling, and other interior projects. Delivers a strong permanent bond and excellent adhesion on common building materials. Instant grab. Multi-material. Meets or exceeds ASTM C557. Premium grade adhesive specifically formulated for drywall installation. Prevents nail pops and helps limit air and sound movement between walls. Easy to gun adhesive that delivers a strong permanent bond. Instant grab. Exceeds ASTM C557
WW Henry 663-034 Carpet Adhesive Franklin Titebond GREENchoice Construction Adhesive Quikrete 9902-10 1-Part Construction Adhesive
Use for the installation of outdoor carpeting. Bonds to concrete, asphalt paving and other clean, sound paving surfaces (not asphalt roofing), exterior or marine grade plywood decking which is sound and not subject to deterioration (not plank decking or treated wood), aluminum boat decks which are clean and roughened, fiberglass which has been roughened, substrates which have been painted, stained, or otherwise coated must be tested to assure compatibility with the adhesive. Water-resistant. Strong initial grab. No open time required. Long working time. Excellent bond integrity and trowelability. Temperatures should be 65-degrees Fahrenheit (18-degrees Celsius) or above in areas where adhesive is to be used. Covers approximately 90 to 108 sq. ft. per gallon using a 1/8" x 1/16" x 1/8" trowel. For all common building materials including trim, paneling, drywall, foamboard, tub surrounds, plastics, metal, masonry and wet, frozen and treated lumber. Safer to use. No harmful fumes. Non-flammable. Water clean up. 10 to 120-degrees fahrenheit service temperature. Covers 129 ft. with 1/8" bead per 10.5 oz and 355 ft. per 29 oz. cartridge. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557. For permanently bonding concrete, brick, marble, stone, wood, glass, aluminum, steel, PVC and tile. Use to bond retaining wall block and caps and repair broken concrete.
ADHESIVE SUBFLOOR POLYU 28OZ  Loctite 1589199 Loctite - Power Grab Construction Adhesive Custom Building ARL4000QT Acrylpro Ceramic Tile Mastic
Can be used in most interior and exterior construction projects either on the job or the production line. It bonds all wood to wood assemblies dry, wet or frozen. Primarily designed for on-site bonding of subfloor and plywood decking to joists during cold weather. Suitable for subfloor, glued floor systems, tongue-and-groove flooring, standard wood construction, concrete, masonry, and wood-to-wood assemblies. Ideal for use in prefab or modular construction. Bridges minor framing gaps. Helps reduce squeaky floors. Instant grab technology eliminates the need for nails and screws in many DIY and repairs jobs. No bracing and no flashing off. Latex-based for easy water clean-up. Low-odor, paintable and will not dry out. Pressure pack eliminates the use of a caulking gun. Use on concrete, brick veneer, treated wood, plywood and drywall. AFG-01 approved. High performance for floor and wall tile installations requiring superior bond strength. Extended water-resistance. Quick grab, non-slip strength even on larger wall tiles. Spreads quickly and easily. Use with ceramic or mosaic tile up to 12" x 12". 75 minute open time, 45 minute adjustment time, 110 psi shear strength. Exceeds ANSI A136.1 Type I specifications. Covers approximately 40 to 60 sq. ft. per gallon (3.7 to 5.6 sq m per 3,78 L)  using a 3/16" x 5/32" (15 x 15 cm) V-notch trowel.
Loctite PL 500 Landscape Block Adhesive WW Henry 356-030 Flooring Adhesive ADHESIVE CONSTRUCTION 9OZ
Designed for quick and easy application of the final course of cap with landscape blocks and the installation of cement pavers. Secures block walls and capstones. Adheres to brick, stone, timbers, concrete, metal, slate and wood. -20 to 140-degrees fahrenheit service temperature. 20-minute work time. Cleanup with mineral spirits. Covers 32 lin. ft. with 1/4" bead. Synthetic rubber resin. Withstands environmental extremes installation. Meets SFBC 2309.2(A) 23-b, section 3402.2(C) (16). Use to install commercial and residential felt-back sheet flooring, linoleum and almost all-commercial carpet. Bond to concrete, underlayments, wood substrates, terrazzo, and existing resilient flooring. Trowelable, moisture-resistant, non-flammable, and low odor. Fast initial grab and long working time. Coverage varies from 90 to 275 sq. ft. depending type of trowel and application. For all surfaces. Holds in 30 seconds, and bonds virtually anything including subfloor, mirrors, trim, drywall, landscaping, bath surrounds, foamboard, marble and more. Paintable. All weather. Gap-filling, durable, 100-percent waterproof formula.
Franklin Titebond Construction Adhesive Dap 00141 Weldwood Flooring Adhesive SEALANT HEAVY DUTY PL 9.5OZ
Design for a wide range of construction applications including wet, frozen and treated lumber. Also for metal, brick, concrete, ceramics and most large panel-type substrates. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Meets ASTM D3498 and ASTM C557 specifications. For bonding many types of floor coverings over a variety of surfaces. May be used for installing felt-backed resilient sheet goods, vinyl composition tile (VCT), cork or rubber tile and carpeting backed with polypropylene, jute, rubber, etc. Forms strong, water-resistant bonds. Nonflammable and easy water clean-up. Long-lasting tackiness allows easy repositioning as well as next day air pocket elimination. Suitable for interior and exterior projects. It can bond and seal a variety of materials including wood, laminate, drywall, plaster, tile, ceramic, porcelain, concrete & masonry, marble, granite, brick, aluminum, stainless steel, metal, fiberglass, PVC and many more. 5X Stretch allows the product to stay permanently flexible, will not shrink or crack over time. Paintable in 30 minutes, fully cures in 24 hours. Weather resistant, will not wash out or discolor. Scrub and mildew resistant for long lasting professional finish in kitchen and bath projects.
Dap 00271 Weldwood Contact Cement Dap 00136 Weldwood Floor Tile Adhesive Dap 00185 Weldwood Carpet Adhesive
Forms permanent bonds on a variety of surfaces. Offers instant adhesion to eliminate the need for clamps or temporary fasteners. Used extensively to bond high pressure laminates for counter tops, tabletops and cabinets. Premium quality neoprene contact cement dries in 15 minutes. Meets all CPSC requirements. Meets performance requirements of Federal Specification MMM-A-130B. Requires only one coat on most surfaces. Covers 216 sq. ft. per gallon. Pressure-sensitive. Designed for the installation of Vinyl Composition Tile (VCT) and asphalt tile. Dries clear to allow chalk lines to show through. Fast set to provide strong early grab/tack. Up to 24 hours working time. Easy to spread. Freeze-thaw stable. Nonflammable. For bonding asphalt, vinyl composition and linoleum floor tiles to most structurally sound floors. Covers approximately 160 - 220 sq. ft. per gallon using a 1/16" x 1/16" x 1/16" sq. notch when using 1/8" and 3/32" tiles. Trowel-grade adhesive for bonding interior carpets to surfaces above, on or below grade. Nonflammable and easy water clean-up.
Franklin 4222 Fast Set Construction Adhesive Surebond EVERSEAL 1-Part Adhesive Sealant Henry 430 ClearPro Thin Spread Floor Tile Adhesive
Provides strength and durability. Non-flammable, non-toxic. Provides a strong bond to common building materials, including wet, frozen and treated lumber. Safe for plastic or foam. For use with non-porous substrates. -20 to 120-degrees fahrenheit service temperature. Exceeds the requirements of APA's AFG-01, ASTM D3498, and ASTM C557. 1/8" Bead covers 355 ft., 1/4" bead covers 89 ft. and 3/8" bead covers 39 ft. 1 hour working time depending on humidity. One-part sealant for many industrial applications such as automotive, construction, roofing, marine, etc. Can be used to adhere the clear snow guard (SKU# 0581165) to metal roofing. Bonds to plastic, fiberglass, metal, wood, cement, etc. Versatile, flexible and hard setting. 50-degrees F minimum application temperature. Weather resistant. Paintable. 2000 PSI tensile strength. Translucent. Use to install vinyl composition tile (VCT) and asphalt tile. Bonds to concrete, wood and wood underlayments, existing well-bonded resilient flooring, terrazzo, marble and radiant-heated subfloors where the surface temperature does not exceed 85 degrees fahrenheit (29-degrees Celsius). 24-Hour working time. Dries clear. Can be used over "Cutback" adhesive residue. Moisture and alkali-resistant. Excellent trowelability. AGIS Guarantee. Covers 350-400 sq. ft. per gallon applied to 1/8" tile.
Dap 00442 Weldwood Carpet Adhesive Dap 25312 Weldwood Contact Cement Dap 00272 Weldwood Contact Cement
Use to permanently install outdoor carpet and artificial turfs. Withstands rain, snow, ice and freezing.  Resists curling. Rubber-based, fast grab formula. Covers approximately 12-16 sq. yd. per gallon on smooth backed outdoor carpet using a 3/32" x 3/32" x 3/32" V-Notch. Covers approximately 6-10 sq. yd. per gallon on textured backed outdoor carpet and artificial using a 1/8" x 1/8" x 1/16" V-Notch. Forms a permanent bond on a variety of surfaces. Instant adhesion eliminates the need for clamps or temporary fasteners. Used extensively to bond high pressure laminates for counter tops, tabletops and cabinets. Forms a durable, high strength bond when parts are assembled and momentary pressure is applied. Excellent for installing vertical and overhead surfaces. No drip, no mess formula, helps to control application. Coverage at 3 dry grams per sq. ft. is approximately 230 sq. ft. per gallon. Forms permanent bonds on a variety of surfaces. Offers instant adhesion to eliminate the need for clamps or temporary fasteners. Used extensively to bond high pressure laminates for counter tops, tabletops and cabinets. Premium quality neoprene contact cement dries in 15 minutes. Meets all CPSC requirements. Meets performance requirements of Federal Specification MMM-A-130B. Requires only one coat on most surfaces. Covers 216 sq. ft. per gallon.
ADHESIVE MARINE PL FAST 10OZ  Acrylpro ARL40001 Type 1 All Purpose Adhesive WW Henry 663-044 Carpet Adhesive
For marine areas and conditions. Fast setting, moisture cure polyether adhesive sealant which delivers strong bonds while forming a watertight, flexible seal above or below the waterline once cured. Free of solvents, phthalates and isocyanates, it will not shrink when cured, discolor from UV exposure, or bubble on damp surfaces. Once cured, it withstands both saltwater and freshwater environments. Cures in 24 hours. Permanently Flexible. Paintable. Won't shrink or discolor from UV exposure. High performance for floor and wall tile installations requiring superior bond strength. Extended water-resistance. Quick grab, non-slip strength even on larger wall tiles. Spreads quickly and easily. Use with ceramic or mosaic tile up to 12" x 12". 75 minute open time, 45 minute adjustment time, 110 psi shear strength. Exceeds ANSI A136.1 Type I specifications. Covers approximately 40 to 60 sq. ft. per gallon (3.7 to 5.6 sq m per 3,78 L)  using a 3/16" x 5/32" (15 x 15 cm) V-notch trowel. Use for the installation of outdoor carpeting. Bonds to concrete, asphalt paving and other clean, sound paving surfaces (not asphalt roofing), exterior or marine grade plywood decking which is sound and not subject to deterioration (not plank decking or treated wood), aluminum boat decks which are clean and roughened, fiberglass which has been roughened, substrates which have been painted, stained, or otherwise coated must be tested to assure compatibility with the adhesive. Water-resistant. Strong initial grab. No open time required. Long working time. Excellent bond integrity and trowelability. Temperatures should be 65-degrees Fahrenheit (18-degrees Celsius) or above in areas where adhesive is to be used. Covers approximately 90 to 108 sq. ft. per gallon using a 1/8" x 1/16" x 1/8" trowel.
Henry 444 FRP Installer Grade Panel Adhesive WW Henry 356-040 Flooring Adhesive Dap 25332 Weldwood Contact Cement
For the installation of fiberglass reinforced plastic panels. Bonds to concrete, plywood, gypsum drywall and plaster on all grade levels as recommended by the panel manufacturer. High strength. Fast setting. Moisture resistant. Nonflammable. Adhesive should not be used in situations where odors may be transmitted to food. Covers 50-60 sq. ft. per gallon Use to install commercial and residential felt-back sheet flooring, linoleum and almost all-commercial carpet. Bond to concrete, underlayments, wood substrates, terrazzo, and existing resilient flooring. Trowelable, moisture-resistant, non-flammable, and low odor. Fast initial grab and long working time. Coverage varies from 90 to 275 sq. ft. depending type of trowel and application. A high solids, water based contact cement. Meets the stringent requirements of the professional user. Complies with all current VOC requirements. Dries in 30-40 minutes.  Works on a variety of surfaces. Heat resistant. Easy water clean up. Low odor. For bonding decorative laminates, paper backed, veneers, paper, cork, cloth, flakeboard, drywall, medium density fiber board, wood, plywood and cloth backed vinyl to itself of bonded to particle board. Coverage at 3 dry grams per sq. ft. is approximately 760 sq. ft. per gallon.
Liquid Nails LN-700 Fast Bonding Construction Adhesive Great Stuff Pro 343087 Grade Wall and Floor Adhesive DAP Smartbond Gun Grade Subfloor Construction Adhesive
A fast-bonding, permanent weather-resistant adhesive for most common materials. Works best on wood, metal and concrete. GREENGUARD GOLD certified. Water resistant. Single-component, moisture-cured foam adhesive, used to ashere subfloors, drywall, paneling, foam panels and most construction materials. Provides a fast-grab tack and long-term bond to lumber, plywood, particle board, masonry, drywall, concrete and foam panels. Offers bonding power on dry, damp and even frozen lumber, making it efective in a variety of weather conditions. For use with pro series gun. Applies as a foam and transforms by collapsing into a high-strength, fast-curing adhesive gel. Polyurethane formula provides a strong, durable and permanent bond to a wide range of building materials. Bonds to wet, dry, frozen and treated lumber. Reduces nailing, floor squeaks and nail pops. Reusable for up to 30 days. Bridges gaps and voids. Exceeds ASTM D3498 shear strength tests.
DAP Smartbond Subfloor Construction Adhesive Dap 00142 Weldwood Flooring Adhesive Dap 25192 Weldwood Ceramic Tile Adhesive
Applies as a foam and transforms by collapsing into a high-strength, fast-curing adhesive gel. Polyurethane formula provides a strong, durable and permanent bond to a wide range of building materials. Bonds to wet, dry, frozen and treated lumber. Reduces nailing, floor squeaks and nail pops. Reusable for up to 30 days. Bridges gaps and voids. Exceeds ASTM D3498 shear strength tests. Comes with integrated straw nozzle. For bonding many types of floor coverings over a variety of surfaces. May be used for installing felt-backed resilient sheet goods, vinyl composition tile (VCT), cork or rubber tile and carpeting backed with polypropylene, jute, rubber, etc. Forms strong, water-resistant bonds. Nonflammable and easy water clean-up. Long-lasting tackiness allows easy repositioning as well as next day air pocket elimination. For installing ceramic and mosaic tile to floors, walls and countertops. High-strength, trowel grade, latex-based adhesive. Easy to spread, quick-grab formula requires no bracing. Provides excellent water resistance. Low VOC, non flammable and easy water clean-up. Interior use. Meets ANSI A136.1, Type I requirements.
Dap 00186 Weldwood Carpet Adhesive OSI FRP555 Reinforced Panel Adhesive Dap 00137 Weldwood Floor Tile Adhesive
Trowel-grade adhesive for bonding interior carpets to surfaces above, on or below grade. Nonflammable and easy water clean-up. High quality, solvent free adhesive for installing fiberglass reinforced panels on common surfaces. Provides and excellent bond to drywall, wood, concrete and plastic foams. Fast grab, strong, flexible bond. Low odor; water-resistant. Water clean up. Covers 50 - 60 sq. ft. per gallon. Pressure-sensitive. Designed for the installation of Vinyl Composition Tile (VCT) and asphalt tile. Dries clear to allow chalk lines to show through. Fast set to provide strong early grab/tack. Up to 24 hours working time. Easy to spread. Freeze-thaw stable. Nonflammable. For bonding asphalt, vinyl composition and linoleum floor tiles to most structurally sound floors. Covers approximately 160 - 220 sq. ft. per gallon using a 1/16" x 1/16" x 1/16" sq. notch when using 1/8" and 3/32" tiles.
WW Henry 12235 Surelock Wood Floor Adhesive Loctite 1652275 Pl400 Professional Line Construction Adhesive WW Henry FP00176069 Bulldog Flooring Adhesive
Used to bond concrete, underlayments, wood substrates, terrazzo and existing resilient flooring. Wood can be set into HENRY SureLock 1171 immediately after troweling, but works best with a few minutes of open time. The recommended maximum working time is approximately 30 minutes, depending on temperature and humidity. Low VOC, solvent-free and low odor, enhanced moisture and alkali resistance. Formulated for a powerful permanent bond with all heavy duty construction, interior or exterior. For bonding wood, metal, concrete/masonry and FRP panels. Virtually unaffected by weather extremes. VOC compliant formula for California sales, meets stringent new California State CARB and Federal VOC Regulations. Meets or exceeds APA AFG-01, ASTM D 3498 and conforms to HUD requirements. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin ft. Use to install commercial carpet in light traffic areas or residential felt-back rotovinyl sheet flooring. Bond carpet backings (jute, polypropylene, and non backed needle-punched) and vinyl flooring to concrete, underlayments, wood substrates, terrazzo and existing resilient on all grade levels as recommended by the flooring manufacturer. 60-90 minutes working time. Covers 140-160 sq. ft. per gallon on residential felt-back rotovinyl sheet flooring and coverage for carpet installations is 90-108 sq. ft. per gallon.
Custom Building ARL40003 Acrylpro Ceramic Tile Adhesive Dap 25133 Weldwood Wood Floor Adhesive Dap 25336 Weldwood Contact Cement
For interior use on floors, walls, and countertops. Spreads quickly and easily and offers extended open times for adjusting tile. Provides higher bond strength required for 12" x 12" ceramic floor tile installations and exceptional durability in wet areas. Offers maximum resistance to intermittent water exposure such as, tub surrounds and shower walls as defined by ANSI A136.1, Type I. Protected by MoldGard technology to resist mold and mildew growth. Uses on ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile. Covers approximately 40-60 sq. ft. per gallon using a 3/16" x 5/32" V-notch trowel. Synthetic rubber, nonflammable mastic for installation of prefinished wood flooring. For use on, above or below grade. Allows for normal expansion and contraction of wood floor. Fast dry; excellent water resistance. A high solids, water based contact cement. Meets the stringent requirements of the professional user. Complies with all current VOC requirements. Dries in 30-40 minutes.  Works on a variety of surfaces. Heat resistant. Easy water clean up. Low odor. For bonding decorative laminates, paper backed, veneers, paper, cork, cloth, flakeboard, drywall, medium density fiber board, wood, plywood and cloth backed vinyl to itself of bonded to particle board. Coverage at 3 dry grams per sq. ft. is approximately 760 sq. ft. per gallon.
Loctite PL 500 Tub Surround Adhesive Liquid Nails LN-903 Liquid Nails Construction Adhesive Dap 25117 4000 Construction Adhesive
Fast-grab. Especially formulated for bathtub and shower surrounds. Engineered for all plastic panels, and provides a permanent bond in high-moisture conditions. Formulated to provide the professional and do-it-yourselfer excellent adhesion and longer working time. For brick veneer, fiberboard, wood trim, particleboard, drywall, plywood, polystyrene foam, imitation stone, ceiling tiles. Instant holding power. Water-resistant. Bonds heaviest materials. Multi-purpose, low solvent, high strength. Exceeds ASTM C-557. One gallon can covers 60 to 90 sq. ft. One quart can covers 15 to 22 sq. ft. Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adhesive delivers a high strength weatherproof bond on wet, frozen and treated lumber, and is easy to gun in cold temperature. Adheres to concrete, dimensional lumber, masonry, metal, OSB and enhanced OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D 3498 and APA AFG-01. PFS Certified.
Custom Building RBM3 Reliabond Ceramic Tile Adhesive Liquid Nails LN-903 Liquid Nails Construction Adhesive Liquid Nails FRP-310 Fiberglass Rpp Adhesive
All-purpose professional adhesive formulated for wall, floor and countertop installations of ceramic and stone tile. Spreads easily and resists slipping on vertical applications. Protected by MoldGard Technology to resist mold and mildew growth. Use on tile types such as Ceramic, mosaic, quarry, pavers, gauged slate, porcelain and gauged stone tile. Substrates Concrete, masonry, plaster, gypsum wallboard, cement backerboards, exterior grade plywood, existing ceramic tile, resilient flooring, existing plastic laminate. Coverage area 40-60 (3.7 - 5.6 sq m) sq. ft. 3/16" x 5/32" (5 x 4 mm) for V-notch. 15-25 (1.4 - 2.3 sq m) sq. ft. 1/4' x 1/4" x1/4" (6 x 6 x 6 sq m) for square notch. Formulated to provide the professional and do-it-yourselfer excellent adhesion and longer working time. For brick veneer, fiberboard, wood trim, particleboard, drywall, plywood, polystyrene foam, imitation stone, ceiling tiles. Instant holding power. Water-resistant. Bonds heaviest materials. Multi-purpose, low solvent, high strength. Exceeds ASTM C-557. One gallon can covers 60 to 90 sq. ft. One quart can covers 15 to 22 sq. ft. Strong-bonding, low odor, adhesive specifically formulated for bonding Fiberglass Reinforced Panels (FRP). Use to bond to cured concrete, wood, drywall, concrete backerboard, greenboard, foamboard, and non-reinforced panels. Meets or exceeds ASTM C-557 Specifications. One gallon covers 50 sq. ft.
WW Henry 356-069 Flooring Adhesive Loctite PL 300 Foamboard Adhesive Liquid Nails LN-601 Liquid Nails Construction Adhesive
Use to install commercial and residential felt-back sheet flooring, linoleum and almost all-commercial carpet. Bond to concrete, underlayments, wood substrates, terrazzo, and existing resilient flooring. Trowelable, moisture-resistant, non-flammable, and low odor. Fast initial grab and long working time. Coverage varies from 90 to 275 sq. ft. depending type of trowel and application. Provides adhesion of foam to all types of surfaces, including wood, fiberglass panels, concrete, brick, metal, and drywall. Compatible with foam board insulation. Can be used indoors and outdoors and will not burn, etch, or eat the foam. Permanently joins the foam to the substrate without destroying the adhesion. Meets ASTM C 557 and conforms to HUD requirements. Covers approximately 14 lin. ft. per 10.2 cartridge. VOC compliant version cannot be used at temperatures below 40-degrees. A high-quality, solvent-based adhesive that creates a strong, durable and waterproof bond that remains flexible, bridges gaps up to 3/8" and offers up to 10 minutes working time. Using a 1/4" bead: 10.5 fl. oz. covers 32 lin. ft. and 29 fl. oz. covers 88 lin. ft.
Liquid Nails LNP-902 Liquid Nails Construction Adhesive Liquid Nails LNP-602 Liquid Nails Construction Adhesive Liquid Nails DW-24 Liquid Nails Drywall Adhesive
Helps eliminates squeaky floors. For plywood, waferboard, lumber & treated lumber, particleboard, OSB and foamboard. Bonds wet, frozen and treated lumber. Bridges gaps up to 3/8". Reduces nailing and squeaking. Meets or exceeds APA-AFG-01, ASTM D-3498 and C-557. GREENGUARD GOLD Certified. A tough, weatherproof, solvent-based formula helps eliminate squeaky floors. Penetrates wet, frozen and treated lumber. Excellent bond strength, long term flexibility and excellent bridging capabilities. Reduces nailing, squeaks and nail pops. Exceeds requirements of ASTM-D-3498 and AFG-01 specifications for field gluing of subfloors. Using a 1/4" bead: 10 fl. oz. covers 32 lineal feet and 28 fl. oz. covers 88 lineal feet. Reduces the need for fasteners up to 50-percent. Minimizes nail pops, buffers sound and speeds drywall installation. GREENGUARD Gold Certified.  Covers 88 lineal feet with full round 1/4" bead. Exceeds ASTM C-557.
Henry 430 ClearPro Thin Spread Floor Tile Adhesive WW Henry FP0RSET063 Readyset Mastic Adhesive Franklin 5492 Construction Adhesive
Use to install vinyl composition tile (VCT) and asphalt tile. Bonds to concrete, wood and wood underlayments, existing well-bonded resilient flooring, terrazzo, marble and radiant-heated subfloors where the surface temperature does not exceed 85 degrees fahrenheit (29-degrees Celsius). 24-Hour working time. Dries clear. Can be used over "Cutback" adhesive residue. Moisture and alkali-resistant. Excellent trowelability. AGIS Guarantee. Covers 350-400 sq. ft. per gallon applied to 1/8" tile. For the installing porcelain, quarry, stone, ceramic and mosaic tile over interior walls, floors, and countertops. Helps prevent tiles from slipping after placement. Can also be used to install tiles up to 12" x 12". Excellent grab. Covers 50 sq. ft. per gallon with a 5/32" v-notch trowel. Designed for particleboard, OSB, engineered lumber and wet, frozen and treated lumber. Offers a strong initial tack, provides superior strength and remains permanently flexible. Fills gaps and irregularities between materials and provides a more solid backup surface. Reduces the amount of nailing and helps eliminate squeaky floors. Works well in colder temperatures. -20 to 120-degrees fahrenheit service temperature. Covers 355 ft. with 1/8" bead, 89 ft. with 1/4" bead and 39 ft. with 3/8" bead. Exceeds the requirements of the APA's AFG-01 specification and ASTM C557.
Franklin 3451 Titebond Construction Adhesive WW Henry FP00317069 Construction Adhesive Henkel 1596529 Osi - Pro-Series Sf-450 Construction Adhesive
For wood, paneling, drywall, ceramic tile, metal, foamboard and tub surrounds. For installing foam insulation and panels to most building materials. Allows a 30-minute working time to allow precise placement of materials. -20 to 120-degrees fahrenheit service temperature. Synthetic elastomeric polymer. Covers approximately 129 ft with 1/8" bead per 10.5 cartridge and 355 ft. with 1/8" bead per 29 oz. cartridge. Exceeds the ASTM C557 specification. Installation of commercial and residential construction projects. Bonds wood wall paneling, FRP panels, predecorated wallboard, plywood, particleboard or hardboard, gypsum drywall, polystyrene or urethane foam insulation, furring strips. Bonds dry, wet, frozen and treated lumber to most building materials. Eliminates squeaky floors. All weather formula, waterproof and weatherproof. Formulated to eliminate roll-up on frozen lumber. Reduces sound transmission. Exceeds ASTM D 3498 and APA AG01 specifications. Extrude approximately 85.8 ft at a 1/4 bead and 38.1 ft. at a 3/8" bead.
Loctite Power Grab Construction Adhesive Liquid Nails LNP-903 Liquid Nails Construction Adhesive WW Henry FP0RSET044 Readyset Mastic Adhesive
High grab minimizes nailing requirements. Gap-filling. Bridges minor framing gaps. For paneling and drywall, molding, trim and corkboard. Low odor. GREENGUARD Children and Schools certified. Water resistant. Latex-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. GREENGUARD Gold Certified. For the installing porcelain, quarry, stone, ceramic and mosaic tile over interior walls, floors, and countertops. Helps prevent tiles from slipping after placement. Can also be used to install tiles up to 12" x 12". Excellent grab. Covers 50 sq. ft. per gallon with a 5/32" v-notch trowel.
Loctite 1602142 Pl400 Professional Line Construction Adhesive Liquid Nails LN-905 Landscape Block Adhesive Henry 444 FRP Installer Grade Panel Adhesive
Formulated for a powerful permanent bond with all heavy duty construction, interior or exterior. For bonding wood, metal, concrete/masonry and FRP panels. Virtually unaffected by weather extremes. VOC compliant formula for California sales, meets stringent new California State CARB and Federal VOC Regulations. Meets or exceeds APA AFG-01, ASTM D 3498 and conforms to HUD requirements. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin ft. Prevents shifting and loosening of blocks, stones and timber due to seasonal changes. GREENGUARD Gold Certified. Covers 30 lineal feet with 3/8" bead. For the installation of fiberglass reinforced plastic panels. Bonds to concrete, plywood, gypsum drywall and plaster on all grade levels as recommended by the panel manufacturer. High strength. Fast setting. Moisture resistant. Nonflammable. Adhesive should not be used in situations where odors may be transmitted to food. Covers 50-60 sq. ft. per gallon
Dap 27042 7000 Construction Adhesive Liquid Nails LN-901 Liquid Nails Construction Adhesive Dap 00144 Weldwood Flooring Adhesive
Premium grade adhesive specifically formulated for subfloor and deck installation. Prevents floor squeaks and improves the structural performance of floor assembly when used properly. Adhesive delivers a high strength weatherproof bond on wet, frozen and treated lumber, and is easy to gun in cold temperature. Adheres to concrete, dimensional lumber, masonry, metal, OSB and enhanced OSB, plywood, treated lumber, and wood. Easy to gun adhesive that delivers a strong durable bond. Meets or exceeds ASTM D 3498 and APA AFG-01. PFS Certified. Solvent-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. Water resistant. For bonding many types of floor coverings over a variety of surfaces. May be used for installing felt-backed resilient sheet goods, vinyl composition tile (VCT), cork or rubber tile and carpeting backed with polypropylene, jute, rubber, etc. Forms strong, water-resistant bonds. Nonflammable and easy water clean-up. Long-lasting tackiness allows easy repositioning as well as next day air pocket elimination.
Loctite 1390595 Pl Construction Adhesive Liquid Nails LN-903 Versatile Construction Adhesive Franklin 4221 Fast Set Construction Adhesive
Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft. Latex-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. GREENGUARD Gold Certified. Provides strength and durability. Non-flammable, non-toxic. Provides a strong bond to common building materials, including wet, frozen and treated lumber. Safe for plastic or foam. For use with non-porous substrates. -20 to 120-degrees fahrenheit service temperature. Exceeds the requirements of APA's AFG-01, ASTM D3498, and ASTM C557. 1/8" Bead covers 355 ft., 1/4" bead covers 89 ft. and 3/8" bead covers 39 ft. 1 hour working time depending on humidity.
Henkel 1630096 Osi Drywall Adhesive Henkel 827628 Pro-Series Qb-300 Construction Adhesive Eclectic 230034 E6000 Industrial Strength Adhesive
Bonds gypsum board to wood metal studs, concrete or block walls. Eliminates nail pops, bridges minor framing gaps. Reduces fastener use, reduces sound transmission. Meets ASTM C 557-93A specifications. For bonding all types of paneling to structurally sound surfaces. Installs vinyl covered gypsum panels and all types of foam panel boards. Bonds foam to block or concrete walls and ceilings. Adheres cork, marble, polystyrene bath panels. Waterproof, fast grab, sets up quickly. Using a 10.5 oz. cartridge covers approximately 32 lin. ft. with a 1/4" bead and 14 lin. ft. with a 3/8" bead. Using a 29 oz. cartridge covers approximately 89 lin. ft. with a 1/4" bead and 40 lin. ft. with a 3/8" bead. Provides adhesion strength and versatility. Use to adhere metals, glass, rubber and plastics. Universal vehicle maintenance and repair solution. Can be used as a potting material in electrical and computer applications. Paintable. Waterproof. Flexible. Non-flammable.
Loctite 1390602 Pl200 Professional Line Construction Adhesive Liquid Nails LNP-601 High Quality Construction Adhesive Franklin 5352 Drywall Adhesive
For paneling, drywall and other light construction, inside or outside. Helps reduce nail pops and mechanical fasteners. Use to bond drywall to concrete or block walls, drywall to drywall laminations or paneling and FRP. May be applied at temperatures from 10-degrees to 100-degrees fahrenheit. Moisture resistant. Meets and exceeds ASTM C-557 specifications. With a 3/8" bead 10.2 oz cartridge covers approximately 14 lin. ft. and a 28 oz. cartridge covers approximately 38 lin. ft. A high-quality, solvent-based adhesive that creates a strong, durable and waterproof bond that remains flexible, bridges gaps up to 3/8" and offers up to 10 minutes working time. Using a 1/4" bead: 10.5 fl. oz. covers 32 lin. ft. and 29 fl. oz. covers 88 lin. ft. Designed for applying drywall to wood, hardboard, gypsum wallboard, cold-rolled steel and aluminum. Strong initial tack allows the panels to be positioned quickly without slipping. Fills irregularities and gaps in substrates, providing a strong bond and a more solid backup surface. Exceeds the ASTM C557 specification. Covers approximately 355 ft. using 1/8" bead 89 ft, using 1/4" bead, and 39 ft. using 3/8" bead.
Dap 25082 Beats The Nail Construction Adhesive Liquid Nails LNP-901 Liquid Nails Construction Adhesive Liquid Nails LN-902 Non-Flammable Construction Adhesive
For general construction, remodeling, maintenance and repair projects. Quick-grab formula provides a high-strength, heat and water resistant bond to a variety of substrates. Meets ASTM C-557 Specifications. Solvent-based formula bonds even the heaviest materials including counters, cabinets, paneling, brick veneer, ceramic fixtures, shelving, etc. Strong permanent bond reduces nailing. Flexible, bridges gaps. Up to 10 minutes working time. Exceeds 400 psi ultimate shear strength. Exceeds requirements of ASTM C-557-73. Water resistant. Helps eliminates squeaky floors. For plywood, waferboard, lumber & treated lumber, particleboard, OSB and foamboard. Bonds wet, frozen and treated lumber. Bridges gaps up to 3/8". Reduces nailing and squeaking. Meets or exceeds APA-AFG-01, ASTM D-3498 and C-557. GREENGUARD GOLD Certified.
APPLICATOR GUN ADHESIVE 22IN  Franklin 8179 Provantage Wood Floor Adhesive WW Henry FP01171069N Surelock Wood Floor Adhesive
Designed to be used with SmartBond construction adhesives. Reduces hand fatigue and allows for one-handed operation. Non-drip, instant on/off valve tip. For use in new construction flooring installations. Can be used for installation of all engineered flooring, as well as bamboo and solid flooring up to 5/8" thick. Helps minimize hollow spots. Sets up quickly and minimizes board movement. High moisture resistance. Complies with all federal and state VOC regulations as well as the South Coast Air quality Management District. Covers approximately 35-65 sq. ft. per gallon. Coverage depends on floor type and trowel size. Used to bond concrete, underlayments, wood substrates, terrazzo and existing resilient flooring. Wood can be set into HENRY SureLock 1171 immediately after troweling, but works best with a few minutes of open time. The recommended maximum working time is approximately 30 minutes, depending on temperature and humidity. Low VOC, solvent-free and low odor, enhanced moisture and alkali resistance.
OSI FRP555 Reinforced Panel Adhesive Loctite 1390594 Pl Construction Adhesive Liquid Nails LN-602 Liquid Nails Construction Adhesive
High quality, solvent free adhesive for installing fiberglass reinforced panels on common surfaces. Provides and excellent bond to drywall, wood, concrete and plastic foams. Fast grab, strong, flexible bond. Low odor; water-resistant. Water clean up. Covers 50 - 60 sq. ft. per gallon. Provides adhesion to most common construction materials. Designed for sub-floor installations. Can be used on polystyrene foam, wood, metal, fiberglass, masonry, ceramic tile, marble, OSB and most common types of building materials. Resistant to moisture, dampness and temperature changes. Fast cure. Non-staining. Meets AFG-01 ASTM C 577, ASTM D 3498 and conforms to HUD UM 60a specifications. With a 1/4" bead 10.2 oz cartridge covers approximately 30 lin. ft. and a 29 oz. cartridge covers approximately 90 lin. ft. A tough, weatherproof, solvent-based formula helps eliminate squeaky floors. Penetrates wet, frozen and treated lumber. Excellent bond strength, long term flexibility and excellent bridging capabilities. Reduces nailing, squeaks and nail pops. Exceeds requirements of ASTM-D-3498 and AFG-01 specifications for field gluing of subfloors. Using a 1/4" bead: 10 fl. oz. covers 32 lineal feet and 28 fl. oz. covers 88 lineal feet.
Sika 106403 Sikabond Construction Adhesive Liquid Nails LN-710 Low VOC Paneling and Molding Adhesive Liquid Nails LN-604 Projects and Foamboard Adhesive
Bonds to concrete, masonry, wood, metal, stone, mirror, marble, flashing, tub surrounds and more. Will not shrink, crack or get brittle. Superior bond strength. 1 to 2 hours tack-free time depending on climate. 3 to 5 days final cure. A latex-based adhesive that provides precision placement and requires less nailing. Offers a 20-minute working time and a durable, impact-resistant bond. GREENGUARD Gold Certified. Using a 1/4" bead covers 30 lineal feet. A high-strength, low-odor, latex-based construction adhesive for indoor use. Water resistant. Bridges gaps up to 3/8". GREENGUARD Gold Certified.  Covers approximately 32 lineal ft. using a 1/4" bead.
Loctite PL 300 Foamboard Adhesive DAP Weldwood Fiberglass Reinforced Panel Adhesive ADHESIVE CONST HVY DUTY 28OZ
Provides adhesion of foam to all types of surfaces, including wood, fiberglass panels, concrete, brick, metal, and drywall. Compatible with foam board insulation. Can be used indoors and outdoors and will not burn, etch, or eat the foam. Permanently joins the foam to the substrate without destroying the adhesion. Meets ASTM C 557 and conforms to HUD requirements. Covers approximately 14 lin. ft. per 10.2 cartridge. VOC compliant version cannot be used at temperatures below 40-degrees. For bonding FRP panels to concrete, plaster, plywood, and gypsum wallboard. Nonflammable, fast-setting and water resistant. Premium grade, high strength construction adhesive ideal for heavier construction jobs. Delivers exceptional instant grab and a strong permanent bond for heavier remodeling jobs. Adheres to common building materials. Meets or exceeds ASTM C557.
Dap 25488 Beats The Nail Construction Adhesive Liquid Nails LN-715 Low VOC Construction Adhesive Franklin 3452 Titebond Construction Adhesive
For construction, remodeling, maintenance and repair projects. May be used for bonding bath panel, tub enclosures and other types of wall panels to drywall, hardboard, plywood, plaster, masonry and other structurally sound surfaces. Use to repair loose ceramic tiles, sink tops, backsplashes and moulding. For installing Fiberglass Reinforced Panels. Professional-grade formula. Provides water and moisture-proof barrier between wall and panel. High strength and permanent bond. One gallon covers 40-60 sq. ft. depending upon surface irregularity. Provides a water-resistant bond between all types of tub and shower surrounds. No burn though, heat and steam resistant. Great for plastic, fiberglass and polystyrene tub and shower units. GREENGARD Gold Certified. Using a 1/8" bead covers 30 lineal feet. For wood, paneling, drywall, ceramic tile, metal, foamboard and tub surrounds. For installing foam insulation and panels to most building materials. Allows a 30-minute working time to allow precise placement of materials. -20 to 120-degrees fahrenheit service temperature. Synthetic elastomeric polymer. Covers approximately 129 ft with 1/8" bead per 10.5 cartridge and 355 ft. with 1/8" bead per 29 oz. cartridge. Exceeds the ASTM C557 specification.
Dap 00443 Weldwood Carpet Adhesive Dap 00273 Weldwood Contact Cement
Use to permanently install outdoor carpet and artificial turfs. Withstands rain, snow, ice and freezing.  Resists curling. Rubber-based, fast grab formula. Covers approximately 12-16 sq. yd. per gallon on smooth backed outdoor carpet using a 3/32" x 3/32" x 3/32" V-Notch. Covers approximately 6-10 sq. yd. per gallon on textured backed outdoor carpet and artificial using a 1/8" x 1/8" x 1/16" V-Notch. Forms permanent bonds on a variety of surfaces. Offers instant adhesion to eliminate the need for clamps or temporary fasteners. Used extensively to bond high pressure laminates for counter tops, tabletops and cabinets. Premium quality neoprene contact cement dries in 15 minutes. Meets all CPSC requirements. Meets performance requirements of Federal Specification MMM-A-130B. Requires only one coat on most surfaces. Covers 216 sq. ft. per gallon.
   
 
1